REPAIRS TO PLASTERING TILLING FLOORING JOINERY SANITARY FITTINGS PLUMBING AND MISC REPAIR WORKS TO BLDGS IN WAPTI AREA AT AFSSR AND CERTAIN REPAIRS TO PLASTERING JOINERY PLUMBING WORKS AND OTHER MISC REPAIR WORKS TO BLDG IN BLOCKS FROM 16 TO 27 AT T

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and as directed. Note:- Area includes in this items upto 4 stories of building.

M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:3) on RCC Chajja / Facia / Roof projection over 20mm thick in CM 1:4 as doubing coat including cleaning of old wornout concrete,taking down plaster & applying a coat of RBR compund for proper bond of old and new concrete surface etc complete all as specified and as directed. Notes : The Area includes in this items up to 4 th stories building.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) incl cutting of frame with cutter and make good of disturb surface complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) incl cutting of frame with cutter and make good of disturb surface complete all as specified and as directed by Engr-in-Charge.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed

Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roofs, chajjas,Shelves, beams complete all as specified and as directed.

M&L for Use and waste of form work to Chullah hoods, chajjas, shelves, weather shades,suspended slabs, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and as directed

S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and as directed

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and as directed.

Disconnecting existing tanks 500 ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning on tank complete all as specified and as directed.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed.

S&F and testing galvanised steel tubing 15mm bore “medium grade” with all fittings complete fixed to wall surfaced/concelled incl Taking down or up steel tubing 15mm bore and connections and complete all as specified and as directed.

S&F and testing galvanised steel tubing 20mm bore “medium grade” with all fittings complete fixed to wall incl Taking down or up steel tubing 20mm bore and connections and complete all as specified and as directed.

M&L for Taking down or up galvanised steel tubing 20mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and as directed

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads and removal for site complete all as specified and asdirected by Engineer-in-Charge.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in NCL windows with rubber beading in square n exc 0.5 sq.m. in each pane complete all as specified and as directed by Engineer-in-Charge.

M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface complete all as specified and as directed.

M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface complete all as specified and as directed.

M&L for preparing new plastered surface of walls and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and as directed.

M&L for completely removal of the existing treatment by wire brushing or sand paper or other scraping material as required from wall including prepration of surfaces complete as specified and as directed.

M&L for preparing Old plastered surface of walls and applying two coat of oil bound distemper white or any tint etc complete as specified and as directed.

M&L for preparing Old plastered surface of walls and applying one coat of oil bond distemper white or any tint etc complete as specified and as directed.

M&L for 2mm thick birla white putty and making the surface smooth etc complete as specified and as directed.

M&L for preparation of newely plastered surface of wall and applying two coat of cement base paint over a coat of primer etc complete all as specified and as directed. Notes : the Area includes in this items up to 6th storied building.

M&L for preparation of old plastered surface of wall and applying two coat of cement base paint complete all as specified and as directed. Notes : the Area includes in this items up to 6th storied building.

M&L for completely removal of the existing treatment from wall,chajjas,facia and preparing plaster surface of wall and applying two coat of exterior weather proof paint overr a coat of primer etc complete all as specified and as directed. Note : the area includes in this items upto 4th storied building.

M&L for preparation of newly plastered surface of wall,chajjas,facia and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and directed. Note : the area includes in this items upto 4th storied building.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces complete all as specified and as directed.

S&F window/ventilator section of frame 72x55 mm fixed to wall or concrete surface with rawl plugs made, of galvanized steel powder coated and section of shutter 47x20 mm, mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6 mm including grills/guard bars made of square bars powder coated fixed to windows frame with screws at 150mm c/c both ways, 4 to 5 mm thick plain/figured sheet glass , 0.36mm stainless steel wire cloth with 1.40mm aperture necessory fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed. Make:- NCL type-4000 series or equivalent out of makes spd in list of makes.

S&F Aluminium anodized powder coated Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/central Rail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and as directed.

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm PVC sheet reinforced with MS Squre Tube in opening etc PVC sheet should be wood grain printed/plain as approved by Engr-in-charge complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed.

S&F IInd class hard wood 35mm thick Plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and as directed.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed.

M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

Supply and fix Godrej pattern mild steel cup board with shutter made out of 18 guage M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed.

M&L for 18/19mm thick Block Boards, grade 1 quality , exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and as directed.

S&F 100mm size, hasp and staple safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-charge.

S&F factory made PVC shutter in required size at shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete including required frame work. The panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as directed by Engr-in-Charge.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and as directed by Engineer-In- Charge.

S&F 30mm wide flaps continuous (Piano) hinges mild steel bright finish complete all as specified and as directed by Engineer-In- Charge.

S&F 40 mm dia cup boards knobs fixed with nut , screw and washer of mild steel , bright finished Complete all as specified and as directed.

S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified and as directed.

S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and as directed

S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and as directed.

S&F 150mm long mild steel pressed handle, oval type, stove enamelled complete all as specified and as directed.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and asdirected.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and as directed by Engineer-in-Charge.

Supply only Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed

S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and as directed.

Supply only Butt Hinges, 50mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Demolition of Cement Concrete in sunken floors and pavings exc 15 cm thickness above ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:3 with water proofing compound, finishing even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying evenly a coat of epoxy compound of Dr Fixit or equalvent as approved by Engrineer-In-Charge as in sunken portion of WC including cleaning surfaces complete all as specified and as directed.

M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing even and smooth without using extra cement complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed.

M&L for Non skid , ceramic coloured tiles 9 to 10 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed.

M&L for Non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 400mmx400 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete wall surface as backing coat of dado/skirting etc complete all as specified and as directed.

M&L for Glazed ceramic tiles coloured 300mmx 450mm, 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match etc complete all as specified and as directed.

M&L for granite (of any type) stone slab 16-18mm thick machine cut and machine polised, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge.

Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in sub base all as specified & as directed by Engr -in charge.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls , or including fixing cantilever brackets and connecting union to waste pipe overall size 495mmx 330mmx 160mm including waste coupling and waste pipe complete all as specified and as directed by Engr-in-charge.

S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest, 'P' or 'S" trap cement concrete bedding complete all as specified and as directed.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish complete all as specified and as directed.

S&F in repair Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450/600mm complete all as specified and as directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed.

S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and as directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed.

S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed.

S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed.

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

S&F in repair vitreous China wash basin white, flat back size 550x400mm including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed.

S & F for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and as directed by Engineer-in Charge.

S & F 75 mm bore cast iron T including jointing and laid in trenches complete all as specified and as directed by Engineer-in-Charge.

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cmx30cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed.

M&L for Cutting holes into or through bricks walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required suerficial area exe 150 sqcm.and not exc 400 Sq cm complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening FE-410-W Gde (E-250 quality) and fixing complete all as specified and as directed.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore including stainless steel finale & bracket etc complete all as specified and as directed.

Taking down PVC (SWR) pipes of any description with fitting and making good to disterbed surfaces complete all as specified and as directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade fixed to walls with dash through nut and bolt at every 2mtr length including) including all fittings complete all as specified and as directed by Engineer-in-charge. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade laid in trench or in floor including all fittings complete all as specified and as directed by Engineer-in-charge.

S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and as directed by Engineer-in-charge. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, laid in trench or in floor including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and as directed by Engineer-in-charge.

S&F 110mm bore PVC (SWR) bends any radius With access door complete all as specified and as directed by Engineer-in-charge.

S&F PVC(SWR) single equal branch pieces 110 mm bore "T" type with oval access doors complete all as specified and as directed by Engineer-in-Charge.

S&F110mm bore PVC SWR branch piece double (Double T) equal or unequal.with access door complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bends any radius With access door complete all as specified and as directed.

S&F PVC(SWR) single equal branch pieces 75 mm bore "T" type with oval access doors complete all as specified and as directed by Engineer-in-Charge.

S&F75mm bore PVC SWR branch piece double (Double T) equal or unequal.with access door complete all as specified and as directed.

S&F 75mm bore( SWR) vent cowl complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

Easing and adjusting steel door frame and shutters including taking down shutter and refixing after necessary repair works complete all as specified and as directed.

M&L for Welding in repairs n.exc 5 cm in length, any thickneess of metal to be welded for repair to doors, windows, railing etc complete all as specified and as directed.

Dismantling mild steel work of any description not otherwise complete all as specified and as directed by Engr-in-charge.

S&F plain black, mild steel sheeting 0.63 mm thick, in repair to door, windows, railing, ridges, hips, valley gutters, drip and straight flashings( length and girth as fixed) complete all as specified and directed. Note: Cost includes cutting of sheet in required size to repair of steel door , windows etc and fixing with welding complete all as specified and as directed.

S&F Framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for two coats of synthetic enamel painting over a Priming coat of Red oxide Zinc chrome on New steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces complete all as specified and as directed.

S&F factory made PVC frame of size 75 x 40mm with wall thickness of 4mm made out of extruded 4 mm thick prelaminated PVC sheet reinforced with 15 x 15 mm MS squre tube of gauge 19 gauge thickness through out the frame and mitred cut and two corners and jointed with two nos of 150mm long bracket of 10 x 10 mm MS square tube. the door frame shall be fixed to wall using 60 x 100 mm long MS screw through the frame by using PVC fastners minimum of four Nos of screw to be provided for each vertical members and minimum of two nos of screw to be provided horizontal members etc complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

S&F Aluminium handles, 100mm size cast type anodised complete all as specified and as directed

S&F 150mm long ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and as directed.

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and as directed Note - Reinforcement shall be measured and paid separately

Checking and repair to leakages of each SMQ consist of Checking and repair to leakages in bib taps, mixer taps, stop cocks, angle valves, flushing cisterns, GI pipes, etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings all connected plumbing works etc complete all as spd & directed. Note :- Material such as washer, thread,safeda,screw,M-seal etc included in quated cost.

S&F in repair brass spindle (face part) heavy duty for CP pillar cock,stop cock,Bib cock, wall mixer,basin mixer,conceled stop cock etc 15mm bore complete all as specified and as directed.

Disconnecting existing water tanks n.exe 250 Ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required and reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc complete all as specified and as directed.

S&F polythene water storage tank 200 Ltr capacity as approved by engr-in-Charge, closed top hoisted incl 15mm float valve,socket and fixed in position incl Dismantling of existing water tanks n.exc 250 Ltr complete all as specified and as directed.

S&F in Repair white vitreous china Wash down water closet EWC type ( Pedestal pattern) white ,incl Pedestal pan and trap, connection to drain ( or outgoing pipe) and to flushing pipe , anti -syphonage pipe, etc., complete all as specified and as directed by Engr-in-charge.

S&F in Seat Cover made with High Density plastic Seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair Seat Cover made with High Density plastic Seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated 15mm bore hand health faucet with 8 mm dia hose pipe tube & wall Hook complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC handle for low level cistern complete all as specified and as directed.

S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair waste fitting brass chromium plated of 32 mm dia for wash hand basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair waste fitting brass chromium plated of 40 mm dia for sink with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair 610 mm long PVC waste pipe flexible type 25mm dia suitable for coupling 32mm & 40 mm dia complete all as specified and as directed.

S&F in repair MS bracket upto 450mm long for wash basin and sink incl Refixing of existing wash basin and sink and minor repair complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Brass Chromium Plated Central Hole Mixture 15mm bore (dia) without Popup Waste System with 450mm long provided Hoses including Flange suitable for Wash Hand Basin and fixing-in-repairs, complete all as specified and as directed. MAKE : JAQUAR ARI-39001 B, Marc -1100 or equivalent out of makes spd in list of makes.

S&F in repair brass chromium plated wall mixer with provision for over head shower with115 mm long bend pipe complete all as spd and as directed. Cat Part No F330020(HINDWARE) or equivalent out of makes spd in list of makes.

Taking down damaged/unserviceable Asbestos Plain Building Boards of any descriptions, complete all as specified and as as directed.

M&L for Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, complete all as specified and as directed.

Removing excavated / demolished materials exc 250 m but n-exc 500m and depositing complete all as specified & as directed by Engr -in charge.

Dewatering including sludging mud incl cleaning and removing scale and dirt etc with brush from OVERHEAD WATER TANK of capacity exc 10KL but not exc 50KL incl pumping by mechanical, incl draining out& removal of sludge out of MoD land by means of covered tank incl complete removal of all scales and dirt etc from tank surface and repairs req if any complete all as specified and as directed.

k k enterprises

P R Constructions

M/S GEETANJALI ENTERPRISES

M/S ujjwal associates