Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹39.1 L+₹15,750 (0.40%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹40.1 L+₹1.1 L (2.91%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹42.6 L+₹3.6 L (9.30%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹46.3 L+₹7.3 L (18.8%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹36.2 L
EMD Value
₹72,400
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT, LUCKNOW
ADDN/ALTN IMPROVEMENT TO OFFICER MESS (BLDG No P-06) AT AF STN BKT
2022_MES_532623_4
8616/BKT/E8
Open Tender
Civil Works
Item Rate
150 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹72,400
Yes
15 Dec 2022
21 Sept 2022
15 Oct 2022
21 Sept 2022
13 Oct 2022
1 Oct 2022
Amount
Surface excavation n exc 30 cm deep and averaging 15 cm deep and geeting out soft/loose soil complete all as specified
Excavation in trenches n exc 1.5 m deep wide and n exc 1.5 m in depth for foundation etc and getting out in soft/ loose soil complete all as specified
PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25cm thick with soft/loose soil complete all as specified and directed
Removing excavated soils not exc 50 m and depositing where directed at a level not exc 1.5 m above the strarting point complete all as specified
M&L for formwork for flat rough finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, rafts and raft beams sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to better complete all as specified
M&L for formwork for flat rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stabchions complete all as specified
M&L for fair finished flat form work to sides abd soffits of floor or roof beams, lintels cantilevers, shelves including supports etc complete all as specified
M&L for mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing complete all as specified
M&L for mild steel TMT bars but 8mm to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing complete all as specified
Mild steel TMT bars 5mm to 8mm dia, cut to length, bent to shape required, in striups, spaces and binders and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as speciried
M&L for reinforced cement concrete M-25 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, undereamed piles and mass concrete complete all as specified
M&L for reinforced cement concrete M-25 (using 20mm graded stone aggregate) in beams, cantilevers bressummers lintels over 1.5 m span etc, complete all as specified
M&L for reinforced cement concrete M-25 (using 20mm graded stone aggregate) columns, pillars, piers, posts and struts complete all as specified
M&L for reinforced cement concrete M-25 (using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors,, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified
Spreading and levelling in layers not exceeding 25cm thick and well ramming including watering as required complete all as specified
M&L for hard core of gauge not exceeding 63mm of broken stone, deposited, spread and levelled layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified
M&L for 100mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified
Taking down cement or cement lime plaster on brick or stone walls, etc any description complete all as specified and directed
M&L rendering 15mm thick in cement mortar (1:4) on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified
M&L rendering 15mm thick in cement mortar (1:6) on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified
M&L preparation of new plastered surfaces of walls and applying two coat of oil bound emulsion over one coat of primer over one coat of coat of wall care putty of any approved complete all as specified
M&L preparation of plastered or unplastered old surfaces of walls and applying two coat of oil bound emulsion over one coat of primer over one coat of coat of wall care putty of any approved complete all as specified
Supply only integral waterproofing compound
Taking down chowkats or frames (without taking of shutter) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and as directed
Taking down chowkats or frames (without taking of shutter) n.exc. 1.5 sqm each complete all as specified and as directed
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge.
S & F for 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers in roofs, walls etc. with grade of zinc coating 275 directed & as directed.
S & F plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed
Ditto all as per item No 30 above but except sheeting
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed
M&L Gypsum board 12 mm thick suspended false ceiling fixed with screws as per manufacture instruction supported on snap grid of aluminium frame and GI suspension hangers as per clause 10.38 of SSR Part-I 2020 and 10mm thick plaster of paris over gypsum board ceiling flat surface over IInd class soft wood fillets or metal frame work and reinforced with GI wire mesh all as specified and directed. Make-Everest/Gypboard/Armstrong.
Removing of APP membrane of any description and in any position not otherwise specifically provided for (in roof etc.) and removing from site upto 1.00 KM distance complete all as specified and directed
M&L for water proofing treatment by providing 90-100 micron thick polymeric water proofing membrance over levelling coarse on non-approachable roof (where required) complete all as mentioned below as specified. (i) Average 10mm thick plaster in CM 1:3 mixed with polymer based water proofing compound when levelling coarse is still green. (ii) After the surface is fully dried, it shall be cleaned free from dust and shall be painted with a coat of bituminous primer @ 0.30 ltrs/Sqm. (iii) After primer, the entire roof surface shall be applied with hot, blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg/Sqm. (iv) Over hot bitumen polymeric water proofing membrance consisting of 90 to 100 micron thick central core HMHDPE film and standard weight not less than 3 Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as per manufacturere's instruction and strict supervision of manufacturer's technical representative including as required on verticle surface in parapet. (v) Laying 20mm thick PCC tiles machine pressed factory made as per IS-1237-1980 laid over a bedding layer 20 mm thick in CM 1:4. The cement mortar screed shall be mixed with polymer based liquid water proofing additive @ 5% by weight of cement as per manufacturer's specition/instruction and tile joints as far 3mm and shall be filled with polymer based cement proof joint filler manufactured by M/S Bauchemic (J) Pvt Ltd or M/S Rolle constructions chemical chemicals or equivalent.
M&L for cement concrete 1:2:4 type B1 (20mm graded agg) as in benching , haunching kerb etc rounded or chamfered on edges incl necessary formwork complete all as specified and directed
M&L for cement concrete (1:2:4) type B0 using (12.5mm graded aggregate) in roof for leveling course complete all as specified and directed
Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed.
M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed
Complete removal of existing treatment and M&L for one coat of acrylic water based exterior grade primer @0.9 ltr/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spraymachine of paint application of asian paints Trucare Graco or make as directed having anelectric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed
M&L for water based premium acrylic smooth exterior emulsion of approved colour withsilicon additive & colour stay Technology ,Excellent Dirt Pick up Resistance of AsianPaints Ltd or make approved with low VOC less than 50 , Anti Algal properties in two coats@ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coatwith fully automatic airless spray machine of paint application of Asian Paints TrucareGraco or equivalant having an electric motor of min. 1 HP with a flow speed of min 1 ltrper minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both thecoats of paint as per manufacturer instructions complete all as directed.
M&L for applying two coats of white wash on new ceiling surfaces incl preparation complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L Coloured Vitrified Ceramic tiles double charged/ultra charged 10 mm thick (square/ rectangular) light shade polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L Coloured Vitrified Ceramic tiles double charged/ ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but not exceeding 1.00 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed
M&L Coloured Vitrified Ceramic tiles double charged/ultra charged 10 mm thick (square/ rectangular) light shade polished, area of each tiles exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L Coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bed all as Specified
M&L for Glazed ceramic tiles coloured (450x300mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick backing coat of tiles in CM (1:4) complete all as spd
Dismantling of water tank RCC/HDFE/Ferrocrete and removing it to store of size exc 250 Ltrs to 500 Ltrs capacity
S&F 500 Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 litres capacity.
S&F in repair vitreous china wash down water closet pan (padestal pattern) white complete all as specified and directed
S&F in repair plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and direccted
Taking down existing PVC low level flushing cistern including bend, flush pipes etc and M&L for providing 10 Ltrs capacity PVC low level flushing cistern including chromium plated brass inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length incl making necessary connections to water supply pipe line jointing to WC all as specified and directed.
S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fush pipe etc compete all as specified.(fixed in repair)
S&F in repairs vitreous china wash basin, white flat back size 550x400 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed
S&F in repairs pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed
S&F for aluminium handles cast type anodised of 150mm complete all as specified and directed
S&F 15mm dia stop valves, fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed
S&F 20mm dia stop valves, fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions and fixed in repair
M&L for PVC (SWR) floor trap, plain with 75mm bore with grating including jointing with solvent cement complete and making good the distrubed surfaces to match the existing surfaces including taking out unserviceable traps from the existing surfaces complete all as specified and as directed
S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed
S&F PTMT square grating with side hole 150mm size for trap in repairs .
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls laid in trenches or in floors complete all as specified and directed
S&F 110 mm PVC (SWR) bends/shoe any radius complete all as specified and directed
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore/20mm bore complete all as specified and directed
S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.
Demolition of cement concrete (unreinforced) n exc 15 cm depth below or above ground level complete all as specified and directed
M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified.
M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) 40mm thick as in flooring finished cement concrete surface even and smooth without using extra cement complete all as specified and directed
S&F MS Work such as grills, gratings, etc.. with ends of bars shouldered and/ or reveted, or forged into spikes; framed guard bars; framed balusters; walk ways; railings; framework of water tanks, in suporting frame/angle for cub board and smilar work complete all as specified and directed
Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42 x 50 mm (tolerance + 1mm) with wall thickness 2.00mm ( + 0.2mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical the frames re-inforced by galvanised MS tube size 19 x19 mm and 1 mm ( + 0.10mm ) wall thickness and 3 Nos. Stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with maltii chamber, frame 60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 + 0.2mm thick galvanised steel Frame (28 mm x 21.5 mm), sash (31mm x 27mm), T profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware (Casement door handle made of zinc alloyed ( white powder coated) corner striker. Secondary strikers, cylider, door tranmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with slelected qulaity glass. Note :- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose).
S&F 5.5 mm thick toughened glass (one side looking glass) fixed in uPVC frame complete all as specified and direccted
Providing and fixing factory made uPVG white colour Sliding window Three track area of window not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
Providing & Fixing "RAJSHRI" factory made 100% solid WPC (Wood Plymer Composite)- Door frame 90mm x 45 mm (Moulded) Single Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension grade), calcium Carbonate and Natural Fibres (Wood powder/Rice Hysk/Wheat Hysk) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with fully body treated star headed screws having minimum frame density of 780Kg/cbm & manufactured by "RAJSHRI" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min 990 N), Minimum compressive strength of 58 N/mm2, Modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed by the Engr-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold fast or Dash Fasteners shall be paid seperately)
Providing "RAJSHRI" Brand Facorty Made 100% soled PVC Flush Door shutter 24mm thick, made from Co-Extruded three-layer rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cbm outer layer (0.8-1mm) thick should be of rigid PVC with density of not less than 1400 kg/cbm manufactured by an ISO-9001-2015 certified company. Door should be water proof, Termite Proof , Fire Retardant & having good screw holding capacity complete all as specified and directed
S & F 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed
S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast pr extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
S&F butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.
S& F aluminium handles fabricated type anodised 125mm long size complete all as specified and directed
S&F in repair Brass CP mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F door closure hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width of aluminium body (die cast) weight between 61 to 80 kg in repair complete all as specified and directed
S&F decorated grill for fixing of uPVC window/ventilator (mesh size 50mmx 50mm x 5mm thick) complete all as specified and directed
S&F solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed
M&L for applying two coats of oil bound distemper on old ceiling surfaces incl ncessary preparation complete all as specified and directed
S&F ventilation blinds made of strip 25 to 40mm wide including brackets and building arrangement of PVC complete including fixing on wall with PVC tolerence complete all as specified and directed
Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.
Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and deposited to MES store and will installed after completion of work.
Taking down old unserviceable sub main wiring any size/type /core incl earth wire complete with batten conduit etc all as soecified and directed.
Taking down old and unsv sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connection and amking good the disturbed surface all as directed by Engr-in-charge.
M & L for point wiring for one light/ fan point controled by one switch SP 5 AMP 240 volt modular switch with two single core PVC insulated & PVC unsheathed FRLS multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in and including making good the disturbed surface of wall with colour washing /distempering or as directed the surface to match the existing one in non metallic rigid PVC conduit medium grade 2 mm thick medium 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulatoe etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete With MS ractangular type boxes not less than 1.6 mm thick of suitable size duly inside and outside painted with two coad of synthetic enamelled paintsn over one coat of red oxide paints all as specified and directed. Note:- surface Conduit shall be laid in celing portion only. Make of cable-Plaza/havells/polycab (a) One light/fan point controlled by one switch SP 5 Amps ,240 V
Ditto all as per item No 93 above but 3 pin/ 5 pin, 5 Amp socket outlet control by one 5Amp modular switch on independed board
Ditto all as item No 93 above but 3 pin/5 pin, 5 Amp socket outlet control by one 5 amp modular switch on same board
Ditto all as per item No 93 above but bell/buzzer point control by one 5 amp modular switch 240 V one way complete
All as per the item no 93 herein before but with 2.5 sqmm conductor for 3/ 5 pin 15 Amps modular socket outlet on independent board.
S&F modular switch single pole, one way 5 Amps all as directed.
S&F modular switch bell push single pole one way 5 amp 230 volrt 6 amp 1 module comlete all as directed.
S&F modular socket 6/16 amp 2/3 pin combined 2 module complete all as directed.
S&F modular switch socket combination 6/16 amp 2/3 pin combined 3 module type complete all as directed.
S&F bell, AC, 230 Volt, single pole all as directed.
M&L ceiling rose,PVC/polycarbonate, isolated body all as directed.
S&F modular stepped type electronic fan regulator all as directed.
S&F Submain wiring with two single core PVC insulated FRLS multistrand copper conductor cable of size 6Sq mm drawn into and including non metallic heavy duty rigid concealed PVC condute not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all fittings / accessories and 04 Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)
M&L in repair for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable of size 10 Sqmm 1100 volts grade and one run of PVC insulated unsheathed solid copper conductor cable of size 6 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc complete all as directed by Engr-in-Charge (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate
S&F distribution board TPN with provision of 100 amps MCCB as incommer 4 way 415 volts sheet metal powder coated IP 43 protection with 250 amp rated bus bar for each phase double door type complete all as specifed and directed
S&F Sheet metal enclosure for distribution board when MCB to be used SPN 8 way 240 volt sheet metal powder coated IP 43 protection with 200 amp rated bus bar for each phase double door type complete all as specified and direct
S&F MCCB 4 pole 100 Amps 415 volt rupturing cap 10 ka C series all as specified and directed.
S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 kA breaking capacity complete all as specified and directed.
S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand / GE / Seimens
Sheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Mettalic) complete with one single pole MCB for 240 volts 20 Amps rating rupturning capacity 10 KA complete fixed as in repairs complete all as specified and directed by Engineer-in-Charge Make Havells/MDS/Legrand
S&F square recessed / surface/suspended mounting LED ceiling light with extruded aluminium housing and milky diffuser of 36 W 2'X 2' panel complete with LED driver 240 V ,50 Hz,3600 lumen 6500 k complete all as specified & approved by EIC. Make :- Philips/Havells/GE
Supply and fix LED light fittings 1x18 watt ,220 voltAC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rse complete Make- Philips/Havell/GE
Supply and fix angle holder backlite with 1x9 wtt LED bulb includig all fixing accessories and making connection with copper conductor all a s specified and directed.
Supply and fixing LED security light 45 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed. Make- Philips/Havell/GE
Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, test point and connection to the DBs all as specified and directed complete.
M/s SHIVAM CONSTRUCTIONS
M/S S J CONSTRUCTION
H C CONSTRUCTION
M/S SURAJ A POUL
Industrial Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .