COMPREHENSIVE REPAIR AND MAINTENANCE TO SCC PMP SUB AREA MI ROOM AND OTHER MINOR UNITS AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Easing of door shutters for easy closing / opening by tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc. complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl tightening of screws, adjusting handles, knobs, tightening piano hinges incl misc small adjustments complete all as specified and directed.

Taking down shutters of any description and refixing in the same opening of area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and directed.

S&F in repairs/replacement 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F in repairs/replacement 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F in repairs powder coated aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F of solar control film, 25 micron, reflective type sticked to glass panes as per manufacturer instructions complete all as specified and directed.

S&F in repairs stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including complete all as specified and directed.

S&F in repairs/ replacement solid PVC door frame of size 50 x 47 mm, made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in repairs/ replacement machine moulded factory made 30 mm thick flush shutters, solid core construction with ply wood face panels and decorative laminate type 1 on both sides and fixed to chowkats complete all as specified and directed.

S&F in replacement factory made factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Stainless steel butt hinges (03 Nos.) and screws shall be included in the quoted rate of item.

S&F in replacement factory made 30mm thick 100% Solid WPC (Wood polymer Composite) solid plain glazed/ gauged door shutter of required size, open rebated and prepared to receive gauze, etc. (without sash bars) edge of framing plain, chamfered or rounded, etc; comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw with drawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Notes: (i) Stainless steel butt hinges and screws shall be included in the quoted rate of item. (ii) Wiremesh shall be measured and paid seperately.

S&F in replacement factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other fames/ chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item.

S&F in replacement factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other fames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item.

S&F in repairs/replacement 30 mm thick factory made moulded door shutter-wood free consisting of frame made out of M.S tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom & lock rail, M.S frame shall have a coat of metal primer of approved make & manufacturer and panel shall consist of 20 mm thick multi chanmber hollow PVC section of 1 mm wall thickness bonded using solvent cement / cinoacrylate adhesive with 5 mm (+ 0.25) thick moulded PVC sheet of densitiy 600 kg/ Cbm manufactured by ISO-9001 - 2015 certified company with 2, 4, 6 raised panel design in prelam colour after routing the molded design on one side of the inside panel 5 mm (+ 0.25) plain PVC sheet to be pasted using solvent cement / cynoacrylete adhesive on other one side of the hollow PVC section, all the four edges of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet batton (made by sticking 2 Nos. fom PVC sheets of 5mm (+ 0.25) thickness using PVC solvent cement adhesive, door edges lipping to be PVC of matching colour of plain / prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos) thick PVC sheet to be given for lock provn at lock height, door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screw drilled suitable to pass through both the walls of the MS tube and other hardware should be fixed with 25 mm x 8 mm size steel screw etc complete as per manufacturer specification and drawing complete all as specified and directed.

S&F in repairs/replacement factory made PVC door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous film celuler structure having smooth outer integral skin having 62 mm width and 32 mm thickness of density 600 kg / Cbm manufactured by an ISO-9001-2015 certified company, frame will be mitred and jointed with self driven self tapping screws of size 50 mm x 8 mm and PVC solvent cement or fusion heat welding process all as per manufacturer specifications complete all as specified and directed.

M&L for providing cement concrete, 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc. including demolition of old existing concrete work complete all as specified and directed.

M&L for mild steel framed work such as in grills, gratings, railings, frame work of water tanks etc; with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 150 mm long mild steel pressed handles,oval type, stove enameled black and fixed complete all as specified and directed.

S&F of 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F of 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F of 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 and fixed complete all as specified and directed.

S&F of 100 mm long aluminium handles, cast type, anodised and fixed to shutters complete all as specified and directed.

S&F of 150 mm long aluminium handles, cast type, anodised and fixed to shutters complete all as specified and directed.

S&F of 150 mm long aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and directed.

S&F of 200 mm long aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F of 100 mm long stainless steel handles, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 150 mm long mild steel sliding door bolts with hasp stapple (bolt type) stove enamelled black with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts, four on bolt plate and two on plate complete all as specified and as directed.

S&F of 200 mm long mild steel sliding door bolts with hasp stapple (bolt type) stove enamelled black with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts, four on bolt plate and two on plate complete all as specified and as directed.

S&F of 250 mm long mild steel sliding door bolts with hasp stapple (bolt type) stove enamelled black with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts, four on bolt plate and two on plate complete all as specified and as directed.

S&F of 150 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections complete all as specified and as directed.

S&F of 200 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections complete all as specified and as directed.

S&F of 250 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections complete all as specified and as directed.

S&F in repairs 300 mm long ordinary MS rat tail rod pattern, springs including roller and roller plates and fixed complete all as specified and directed.

S&F of 100 mm long hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F of 150 mm long hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F of 100 mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 300 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for 18 to 20 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) over and including 15 mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bullnosed and dismantling of existing stone slab complete all as specified and directed.

M&L for 20-22 mm thick machine cut kota stone slab flooring over and including 20 mm thick cement screed base in CM 1:6; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for 20-22 mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar etc; over and including 10 mm thick rendering in CM 1:4; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and making the edges bullnosed including rubbing and mirror polishing complete all as specified and directed.

M&L for grinding and polishing kota/ marble/ terazoo/ mosaic flooring to achieve required finish complete all as specified and directed.

S&F in repairs 10 mm thick laminated wooden flooring Action Tesa or equivalent including polishing as per manufacturers direction complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat finished surfaces complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for flat finished surfaces complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6, finished even and rough for receiving floor finish complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in sub base of floors to receive finish, finished even and rough complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like; finishing the surfaces even and smooth without using extra cement with and including making the grooves in bays n exc 2 m in length and cutting dummy joints 65 x 10 mm @ 3 m interval and at corners and filling the same with bitumen mastic 1:3 includng demolition of old existing PCC complete all as specified and directed.

M&L for filling of broken bricks aggregate of gauge n exc 63 mm in soakage well, soak pit and similar work complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base and mass concrete complete all as specified and directed.

M&L for vitrified ceramic light shade tiles 8 - 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm as in floors etc; set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L fo vitrified ceramic light shade tiles 8 - 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, fixed on vertical surfaces such as skirting, dado etc; set and jointed in neat cement slurry over and including 10 mm thick cement plaster in CM (1:4) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for vitrified ceramic light shade tiles 10 mm thick (square/ rectangular) double charged, polished, area of each tiles exceeding 0.36 Sqm but not exceeding 1.00 sqm as in floors etc; set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L fo vitrified ceramic light shade tiles 10 mm thick (square/ rectangular) double charged, polished, area of each tiles exceeding 0.36 Sqm but not exceeding 1.00 sqm, fixed on vertical surfaces such as skirting, dado etc; set and jointed in neat cement slurry over and including 10 mm thick cement plaster in CM (1:4) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 - 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm as in floors etc; set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 - 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, fixed on vertical surfaces such as skirting, dado etc; set and jointed in neat cement slurry over and including 10 mm thick cement plaster in CM (1:4) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for endura joint free coloured tiles 9-10 mm thick (area of each tiles n exc 0.18 sqm each) as in floors, set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for endura joint free coloured tiles 9-10 mm thick (area of each tiles n exc 0.18 sqm each) fixed on vertical surfaces such as skirting, dado etc; set and jointed in neat cement slurry over and including 10 mm thick cement plaster in CM (1:4) and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for coloured glazed ceramic tiles in walls/ vertical surface of size 350 x 250/ 450 x 350 & 7 mm thick over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 including demolition of old brick work complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 including demolition of old brick work complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces, finishing the surfaces even and rough as in back coat for tiles etc. complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on brick/concrete ceiling surfaces, finishing the surfaces even and smooth without using extra cement including taking out old plaster complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement including taking out old plaster complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces, finishing the surfaces even and smooth without using extra cement including taking out old plaster complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over and including a coat of 2 mm thick white cement based putty, finished even and smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of exterior weather proof water based emulsion paint (white/tinted) complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of exterior weather proof water based emulsion paint (white/tinted) over and including a coat of 2 mm thick white cement based putty, finished even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment of walls (any number of layers) by scrapping with steel scrappers or any other means with and including applying two coats of oil emulsion distemper over and including a coat of 2 mm thick white cement based putty, finished even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surfaces (any number of layers) by scrapping with steel scrappers or any other means with and including applying two coats of oil emulsion distemper over and including a coat of 2 mm thick white cement based putty, finished even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

S&F in repairs 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs 10 to 12 mm thick toughened glass as in doors or other similar works in approved shape and design with necessary steel fittings and fixtures including 300 mm long one stainless steel handles fixed in both sides of door shutter, SS locks, hinges fixed with wall/ ceiling/ floors etc complete all as specified and directed. Make: Steel fittings and fixtures shall be of Ebco/Hettich Saint Gobain.

S&F in repairs for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs for aluminium (Extruded section body) door closer hydraulically regulated, designation No. 1, universal type suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F of 25 mm dia stainless steel drapery/ curtain rod, minimum 2 mm thickness with fancy type brackets/ holders & knobs for hanging and fixing complete all as specified and directed.

S&F in replacement of sensotrinic sensor flushing valve with complete kit of half stall vitreous china urinal complete all as specified and directed.

S&F in repairs half stall vitreous china urinal, white colour of size 710 x 480 x 300 mm, Ist quality with sensotrinic sensor flushing valve with complete kit including CP waste coupling and PVC down waste pipe upto floor level complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm including cutting for and pinning in ends of brackets or erecting stand with and including 32 mm PTMT waste coupling and 32 mm PVC corrugated waste pipe complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder with flap complete all as specified and directed.

S&F in repairs stainless steel soap dish holder with glass holder for soap, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs CP round towel ring with round flange, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including white plastic seat cover with aluminium hinging device complete all as specified and directed.

S&F in replacement vitreous china water closet squatting pan "Orissa Pattern" of size 580 x 440mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. and making good to floor complete all as specified and directed.

S&F in repairs vitreous china single piece water closet with inbuilt cistern with UF soft close seat cover, hinges, dual flush cistern fittings and accessories set complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity with 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers and fixed complete all as specified and directed.

S&F in replacemnt rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 1000 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen with plug, washers, PVC waste pipe and CP coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm and fixed complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern) but including CP waste fitting, PVC waste pipe and CP urinal spreader complete all as specified and directed.

S&F of vanity of size 820 x 450 mm with vitreous china wash basin white of suitable size including CP waste coupling and waste pipe of 32 mm bore complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs 5 mm thick corner glass shelf (CP bracket) of size not less than 225 x 225mm with SS railing fixed with SS screws and PVC rawl plug complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and directed.

S&F in repairs of PTMT waste coupling, 32 mm dia, half or full thread and fixed complete all as specified and directed.

S&F in repairs PVC waste pipe 900 mm long of 32 mm dia and fixed complete all as specified and directed.

S&F in repairs brass spindle suitable for bib cock of 15 mm bore complete all as specified and directed.

S&F in repairs 125 mm dia stainless steel grating with or without hole complete all as specified and directed.

S&F in repairs chromium plated shower rose 125 mm size with or without swivel joints, with shower arms any size including fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F in repairs chromium plated shower rose, square 150 x 150 mm size with or without swivel joints, with shower arms any size including fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F in repairs 15 mm bore wall mixer with provision for telephonic shower and overhead shower, brass chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore wash basin mixer, centre hole for mixing hot & cold water, brass chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs hydraulic slow motion/ soft closure plastic water closet seat cover, any colour and fixed in position complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore two way bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore angle/ stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup and capstan head, screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in replacement 15 mm GI tubing, medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F in replacement 20 mm GI tubing medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 20 mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings, fixed on walls/ ceiling or laid in floors complete all as specified and directed.

S&F in repairs 25 mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings, fixed on walls/ ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc; and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in louvres and jallies, 35mm thick (measured solid) including all mouldings but excluding frame and set in CM 1:4 including dismantling of old louvres and jallies complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs, precast man hole covers etc; and set in CM 1:4 complete all as specified and directed.

Excavation in trenches n exc 1.5 m deep and n exc 1.5 m wide for foundation, manholes, pipes, cable, etc; and getting out in any type of soils complete all as specified and directed.

Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 m and depositing where directed at a level n exc 1.5 mtr above starting point all as specified.

M&L for 150 mm bore reinforced concrete pipes, class NP-3, laid in trenches and jointed with collars in cement mortar 1:3 including demolition of existing pipe and concrete complete all as specified and directed.

M&L for 200 mm bore reinforced concrete pipes, class NP-3, laid in trenches and jointed with collars in cement mortar 1:3 including demolition of existing pipe and concrete complete all as specified and directed.

M&L for 300 mm bore reinforced concrete pipes, class NP-3, laid in trenches and jointed with collars in cement mortar 1:3 including demolition of existing pipe and concrete complete all as specified and directed.

M&L for 150 mm bore DWCP pipes, class SN-8 conforming to IS 16098 (Part-2) with coupler and laid in trenches including demolition of existing pipe and concrete complete all as specified and directed.

M&L for 200 mm bore DWCP pipes, class SN-8 conforming to IS 16098 (Part-2) with coupler and laid in trenches including demolition of existing pipe and concrete complete all as specified and directed.

M&L for 300 mm bore DWCP pipes, class SN-8 conforming to IS 16098 (Part-2) with coupler and laid in trenches including demolition of existing pipe and concrete complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (uisng 40 mm graded stone aggregate) as concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (uisng 40 mm graded stone aggregate) as concrete bed to 200 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (uisng 40 mm graded stone aggregate) as concrete bed to 300 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for cutting into existing manholes/ septic tanks for connecting new drains, making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 110 mm dia pipe complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) floor trap plain with SS grating, fixed and jointed with solvent cement complete all as specified and direcetd.

S&F in replacement 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F in replacement 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F of mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc; complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, steel of Fe 410-W (Gde E-250) quality including dismantling of old structural steel complete all as specified and directed.

S&F of rolled mild steel work as in bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans and smilar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F of mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded including cutting to required length, tubes conforming to IS: 1161- 1979 grade St.-240 complete all as specified and directed.

S&F in replacement 4 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap, fixed with L type or J type or cranked hook bolts including dismantling of old existing sheets as in roof covering complete all as specified and directed

S&F in replacement pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, etc. and fixed with self tapping screws complete all as specified and directed

S&F in replacement pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in ridges, hips, valley gutters, drip, straight flashing etc. (length and gith as fixed) and fixed with self tapping screws complete all as specified and directed

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description, exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed.

M&L of preparation of old treated wooden surface of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

M&L for GI frame work for false ceiling with size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling of old wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.

S&F in repairs 12 mm Gypsum board ceiling, fixed with GI angle/ channel frame work incl GI wire/ mesh, etc; in different levels including joints filled with paster of paris, putty including POP work/ cornices and applying two coat of oil bound distemper complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling of size 605x605 mm using 24 x 38 x 0.50mm (composite thickness) tee (bottom pre-coated) and 24 x 24 x 0.50mm (composite thickness) wall angle including hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete as per manufacturers instruction as in ceiling including dismantling of old wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.

S&F in repairs 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600 mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S&F in repairs solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F in repairs 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete alll as specified and directed.

S&F in repairs PVC pin hole sandwich wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed.

S&F in repairs prelaminated particle board 18/19 mm thick, exterior grade, pre-laminated both side with decorative choice lamination fixed with screws to aluminium framed work complete alll as specified and directed.

S&F in repairs 18 mm thick plywood grade BWR, type BB fixed with screws to timber frame work complete alll as specified and directed.

S&F in repairs 0.9 mm thick decorative laminate type-1, of surface finish, colour and pattern as approved and fixed with approved adhesive as per manufacturer instructions complete alll as specified and directed.

S&F in repairs hydraulic soft close auto hinges, thickness 1-1.5 mm, size 8 Inchs of 90 degree opening angle silver colour and fixed with screws to cupboard and similar work complete all as specified and directed.

S&F of 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed.

S&F of continuous (piano) hinges, mild steel, bright finish or electro galvanised with 30 mm width of flaps (when open) and fixed with screws complete all as specified and directed.

S&F in repairs 50 mm long magnetic catcher for cupboard shutters and fixed with SS screws complete all as specified and directed.

S&F of kitchen baskets of 500 mm cart case, depth of 558 mm and height 100 mm of 100% stainless steel, non-magnetic, multi layer chromium plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cups, saucers, bowls and dongas complete all as specified and directed.

S&F of kitchen baskets of 500 mm cart case, depth of 558 mm and height 150 mm of 100% stainless steel, non-magnetic, multi layer chromium plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cups, saucers, bowls and dongas complete all as specified and directed.

S&F of kitchen baskets of 500 mm cart case, depth of 558 mm and height 200 mm of 100% stainless steel, non-magnetic, multi layer chromium plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cups, saucers, bowls and dongas complete all as specified and directed.

M&L for sand cushioning with clean dry sand for laying of interlocking paver block complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape confirming to IS 15658-2006 and size of 60 mm thick, M-35 Grade with grey cement and pigments including dismantling of old tiles/ stone slabs of any thickness complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape and size confirming to IS 15658-2006 of 80 mm thick, M-40 Grade with grey cement and pigments including dismantling of old tiles/ stone slabs of any thickness complete all as specified and directed.

M&L for preparing RCC roof surfaces with wire brushing, drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen VG-10 @ 1.2 kg/sqm of same manufacturer of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using butane torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 including taking down existing old roof treatment of any description, any type including removal old tar felt, screed bed and plastering etc. complete all as specified and directed.

M&L for cutting grooves or chase in brick/ concrete surfacesl, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and directed.

M& L for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with and including water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and directed.

M&L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete roof slab at least for 72 hrs complete all as specified and directed.

M&L for preparation of wall surfaces by cleaning the surfaces till it is free from dust, grease and flaking paint, any unstable paint to be removed, using high pressure wash or scraper, removing algae and fungus on the wall by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with crack filler with and including applying two or more coats of damp proof coarse (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant, good hiding and spreading, developing a strong intercoat adhesion with the substrate therefore no separate primer is required, features such as waterproofing, UV protection, anti algal resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants complete all as specified and directed. Note : (i) Applying paint by brush/ roller as self priming coat on the vertical wall surface in SSD condition, diluting 1 litre with 100 ml clean potable water and allow it to dry for 4-6 hours. (ii) Applying a coat of it without dilution as water proof top coat, either by roller or brush with force coverage at the rate of 3.7- 4.1 Sqm / litre to achieve DFT of 100- 110 microns and allow it to dry for 4- 6 hours. (Lighter shades of white base on the top of dark colours need additional coat for finishing) (iii) An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall etc and allow the coating to full air cure for 7 days.

M&L for applying water proofing coating of Dr. Fixit rain coat or equivalent make comprising of following steps:- Step-1:- Existing substrates shall be cleaned and removed all scale dirt, algea moss, fungal growth with high pressure water using high pressure jet washer. All loose plaster will be repaired with polymer modified mortar using Dr. Fixit pidicrete URP and norrow cracks upto upto 5 mm shall be repaired with crack X-paste and the larger cracks upto 10 mm with Dr Fixit crack-X shrink free. The surface shall be made dry completely for upto 4-6 days for application of primer. Step-2:- M&L for applying one coat primer Dr. Fixit primeseal diluted with 2:1 with water (prime seal water) mainting spreading rate @ 8 to 10 sqm/ltr complete as directed. Step-3:- M&L for applying two coats of Dr. Fixit rain coat without any dilution for coverage 3.5 sqm per/ltr and applying second coat of Dr. Fixit rain coat without any dilution for coverage 7 sqm/ltr complete as directed.

S&F in repairs Gun-metal gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20 mm bore PVC float valve, high pressure of PTMT with epoxy coated aluminium rod and hight density plastic ball and fixed with fittings such as socket, nipple, union etc complete all as specified and directed.

M&L for welding in repairs n. exc 2.5 cm in length and thickness of metal to be welded n exc 6 mm thick complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 47397.00

MS MOHD RIZWAN KHAN (BID ID -3489665)

SHIV SHANKAR MISHRA (BID ID -3485967)

M/S AJAY JAIN (BID ID -3489864)