Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 LAccepted-AOC 11 DHAGA CHEMBERS 1ST FLOOR NARAYAN DHURU CROSS LANE NAGDEVI STREET MUMBAI MAHARASTRA INDIA TUSHAR SHAH 11 NARAYAN DHURU CROSS LANE DAGA CHAMBERS 1ST FLOOR 09987682551 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L1₹18.6 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 3 | NOTL1₹22.2 LRejected-Finance | NOTL1 | Rejected-Finance NOT L1 | |
| 4 | Rejected-Technical 5 5 79 G 3 SRINIVASA COMMERCIAL COMPLEX RANIGUNJ RANIGUNJ HYDERABAD TELANGANA 500003 | HYDERABAD | TELANGANA | 500003 | - | Rejected-Technical Bidder submitting dealership brand certificate which are not acceptable as per tender specifications. Therefore, the bidder is technically not acceptable. | |
| 5 | Rejected-Technical | - | Rejected-Technical Bidder submitted PO references are not considered for evaluation as the order value of 2 submitted POs do not qualify for defined PQC PO valuesand another PO does not meet PQC of last 5 yearsPO from bid opening date. Hence, bidder is technicallyRejec |
Tender Value
Refer Docs
Closing Date
14 Sept 2021, 3:00 pmClosed
DGM(Mat)
IOCL Refineries Division Paradip Refinery, PO Jhimani Via Kujang Dist Jagatsinghpur Orissa 754 141
Procurement of Machine Tools at IOCL Paradip Refinery
2021_PDR_140198_1
PDR21M3429
Open Tender
Mechanical - All
Supply
90 days
IOCL Paradip Refinery
Please refer Tender documents.
3 documents required · 3 mandatory
Exempted
23 May 2022
31 Aug 2021
15 Sept 2021
31 Aug 2021
14 Sept 2021
31 Aug 2021
Amount
DRILL,TWIST,STRAIGHT SHANK,HSS,1MM
DRILL,TWIST,STRAIGHT SHANK,HSS,4MM
DRILL,TWIST,STRAIGHT SHANK,HSS,5MM
DRILL,TWIST,STRAIGHT SHANK,HSS,6MM
TOOL BIT,WHITE,HSS,1/4'' x 4''
TOOL BIT,WHITE,HSS,3/8'' x 4''
TOOL BIT,WHITE,HSS,5/16'' x 6''
TOOL BIT,WHITE,HSS,1/2'' x 6''
BIT,PARTING TOOL,BIT-II,1/2X3/32X4
BIT,PARTING TOOL,MARK-II,1X3/16X6
BIT,PARTING TOOL,MARK-II,5/8X3/32X5
BIT,PARTING TOOL,3/4X1/8X6
BIT,PARTING TOOL,7/8X1/8X6
TOOL, TURN/FACING, ISO 3 R 10X10, P20
TOOL, TURN/FACING, ISO 3 R 12X12, P20
TOOL, TURN/FACING, ISO 3 R 16X16, P20
TOOL, TURN/FACING, ISO 3 R 20X20, P20
TOOL, TURN/FACING, ISO 3 R 25X25, P20
TOOL, TURN/FACING, ISO 3 R 32X32, P20
TOOL, TURN/FACING, ISO 3 R 16X10, P20
TOOL, TURN/FACING, ISO 3 R 20X12, P20
TOOL, TURN/FACING, ISO 3 R 25X16, P20
TOOL, TURN/FACING, ISO 3 R 32X20, P20
TOOL, TURN/FACING, ISO 3 R 10X10, P40
TOOL, TURN/FACING, ISO 3 R 12X12, P40
TOOL, TURN/FACING, ISO 3 R 16X10, P40
TOOL, TURN/FACING, ISO 3 R 20X12, P40
TOOL, TURN/FACING, ISO 3 R 25X16, P40
TOOL, TURN/FACING, ISO 3 R 32X20, P40
TOOL, TURN/FACING, ISO 3 L 10X10, P20
TOOL, TURN/FACING, ISO 3 L 12X12, P20
TOOL, TURN/FACING, ISO 3 L 16X16, P20
TOOL, TURN/FACING, ISO 3 L 20X20, P20
TOOL, TURN/FACING, ISO 3 L 25X25, P20
TOOL, TURN/FACING, ISO 3 L 32X32, P20
TOOL, TURN/FACING, ISO 3 L 16X10, P20
TOOL, TURN/FACING, ISO 3 L 20X12, P20
TOOL, TURN/FACING, ISO 3 L 25X16, P20
TOOL, TURN/FACING, ISO 3 L 32X20, P20
TOOL, TURN/FACING, ISO 3 L 10X10, P40
TOOL, TURN/FACING, ISO 3 L 12X12, P40
TOOL, TURN/FACING, ISO 3 L 16X10, P40
TOOL, TURN/FACING, ISO 3 L 20X12, P40
TOOL, TURN/FACING, ISO 3 L 25X16, P40
TOOL, TURN/FACING, ISO 3 L 32X20, P40
TOOL, FACING, ISO 5 R 10X10, P20
TOOL, FACING, ISO 5 R 12X12, P20
TOOL, FACING, ISO 5 R 16X16, P20
TOOL, FACING, ISO 5 R 20X20, P20
TOOL, FACING, ISO 5 R 25X25, P20
TOOL, FACING, ISO 5 R 32X32, P20
TOOL, FACING, ISO 5 R 16X10, P20
TOOL, FACING, ISO 5 R 20X12, P20
TOOL, FACING, ISO 5 R 25X16, P20
TOOL, FACING, ISO 5 R 32X20, P20
TOOL, FACING, ISO 5 R 10X10, P40
TOOL, FACING, ISO 5 R 12X12, P40
TOOL, FACING, ISO 5 R 16X10, P40
TOOL, FACING, ISO 5 R 20X12, P40
TOOL, FACING, ISO 5 R 25X16, P40
TOOL, FACING, ISO 5 R 32X20, P40
TOOL, FACING, ISO 5 L 10X10, P20
TOOL, FACING, ISO 5 L 12X12, P20
TOOL, FACING, ISO 5 L 16X16, P20
TOOL, FACING, ISO 5 L 20X20, P20
TOOL, FACING, ISO 5 L 25X25, P20
TOOL, FACING, ISO 5 L 32X32, P20
TOOL, FACING, ISO 5 L 16X10, P20
TOOL, FACING, ISO 5 L 20X12, P20
TOOL, FACING, ISO 5 L 25X16, P20
TOOL, FACING, ISO 5 L 32X20, P20
TOOL, FACING, ISO 5 L 10X10, P40
TOOL, FACING, ISO 5 L 12X12, P40
TOOL, FACING, ISO 5 L 16X16, P40
TOOL, FACING, ISO 5 L 16X10, P40
TOOL, FACING, ISO 5 L 20X12, P40
TOOL, FACING, ISO 5 L 20X20, P40
TOOL, FACING, ISO 5 L 32X20, P40
TOOL, SIDE CUTTING, ISO 6 R 10X10, P20
TOOL, SIDE CUTTING, ISO 6 R 12X12, P20
TOOL, SIDE CUTTING, ISO 6 R 16X16, P20
TOOL, SIDE CUTTING, ISO 6 R 20X20, P20
TOOL, SIDE CUTTING, ISO 6 R 25X25, P20
TOOL, SIDE CUTTING, ISO 6 R 32X32, P20
TOOL, SIDE CUTTING, ISO 6 R 16X10, P20
TOOL, SIDE CUTTING, ISO 6 R 20X12, P20
TOOL, SIDE CUTTING, ISO 6 R 25X16, P20
TOOL, SIDE CUTTING, ISO 6 R 32X20, P20
TOOL, SIDE CUTTING, ISO 6 R 10X10, P40
TOOL, SIDE CUTTING, ISO 6 R 12X12, P40
TOOL, SIDE CUTTING, ISO 6 R 16X10, P40
TOOL, SIDE CUTTING, ISO 6 R 20X12, P40
TOOL, SIDE CUTTING, ISO 6 R 25X16, P40
TOOL, SIDE CUTTING, ISO 6 R 32X20, P40
TOOL, SIDE CUTTING, ISO 6 L 10X10, P20
TOOL, SIDE CUTTING, ISO 6 L 12X12, P20
TOOL, SIDE CUTTING, ISO 6 L 16X16, P20
TOOL, SIDE CUTTING, ISO 6 L 20X20, P20
TOOL, SIDE CUTTING, ISO 6 L 25X25, P20
TOOL, SIDE CUTTING, ISO 6 L 32X32, P20
TOOL, SIDE CUTTING, ISO 6 L 16X10, P20
TOOL, SIDE CUTTING, ISO 6 L 20X12, P20
TOOL, SIDE CUTTING, ISO 6 L 25X16, P20
TOOL, SIDE CUTTING, ISO 6 L 32X20, P20
TOOL, SIDE CUTTING, ISO 6 L 10X10, P40
TOOL, SIDE CUTTING, ISO 6 L 12X12, P40
TOOL, SIDE CUTTING, ISO 6 L 16X10, P40
TOOL, SIDE CUTTING, ISO 6 L 20X12, P40
TOOL, SIDE CUTTING, ISO 6 L 25X16, P40
TOOL, SIDE CUTTING, ISO 6 L 32X20, P40
TOOL, PARTING, ISO 7 R 10X06, P20
TOOL, PARTING, ISO 7 R 16X10, P20
TOOL, PARTING, ISO 7 R 20X12, P20
TOOL, PARTING, ISO 7 R 25X16, P20
TOOL, PARTING, ISO 7 R 32X20, P20
TOOL, PARTING, ISO 7 R 10X06, P40
TOOL, PARTING, ISO 7 R 12X08, P40
TOOL, PARTING, ISO 7 R 16X10, P40
TOOL, PARTING, ISO 7 R 20X12, P40
TOOL, PARTING, ISO 7 R 25X16, P40
TOOL, PARTING, ISO 7 R 32X20, P40
TOOL, PARTING, ISO 7 L 10X06, P20
TOOL, PARTING, ISO 7 L 12X08, P20
TOOL, PARTING, ISO 7 L 16X10, P20
TOOL, PARTING, ISO 7 L 20X12, P20
TOOL, PARTING, ISO 7 L 25X16, P20
TOOL, PARTING, ISO 7 L 32X20, P20
TOOL, PARTING, ISO 7 L 10X06, P40
TOOL, PARTING, ISO 7 L 12X08, P40
TOOL, PARTING, ISO 7 L 16X10, P40
TOOL, PARTING, ISO 7 L 20X12, P40
TOOL, PARTING, ISO 7 L 25X16, P40
TOOL, PARTING, ISO 7 L 32X20, P40
TOOL, INT. RECESSING, 156 R 10X10, P40
TOOL, INT. RECESSING, 156 R 12X12, P40
TOOL, INT. RECESSING, 156 R 16X16, P40
TOOL, INT. RECESSING, 156 R 20X20, P40
TOOL, INT. RECESSING, 156 R 25X25, P40
TOOL, INT. RECESSING, 156 R 32X32, P40
TOOL, ST. TURN/GR.(V), 163 N 10X10, P20
TOOL, ST. TURN/GR.(V), 163 N 12X12, P20
TOOL, ST. TURN/GR.(V), 163 N 16X16, P20
TOOL, ST. TURN/GR.(V), 163 N 20X20, P20
TOOL, ST. TURN/GR.(V), 163 N 25X25, P20
TOOL, ST. TURN/GR.(V), 163 N 32X32, P20
TOOL, ST. TURN/GR.(V), 163 N 40X40, P20
TOOL, ST. TURN/GR.(V), 163 N 16X10, P20
TOOL, ST. TURN/GR.(V), 163 N 20X12, P20
TOOL, ST. TURN/GR.(V), 163 N 40X40, P40
TOOL, ST. TURN/GR.(V), 163 N 16X10, P40
TOOL, ST. TURN/GR.(V), 163 N 20X12, P40
TOOL, BORING, ISO 9 R 08X08, P20
TOOL, BORING, ISO 9 R 10X10, P20
TOOL, BORING, ISO 9 R 12X12, P20
TOOL, BORING, ISO 9 R 16X16, P20
TOOL, BORING, ISO 9 R 20X20, P20
TOOL, BORING, ISO 9 R 25X25, P20
TOOL, BORING, ISO 9 R 32X32, P20
TOOL, BORING, ISO 9 R 08, P20
TOOL, BORING, ISO 9 R 10, P20
TOOL, BORING, ISO 9 R 16, P20
TOOL, BORING, ISO 9 R 20, P20
TOOL, BORING, ISO 9 R 25, P20
TOOL, BORING, ISO 9 R 32, P20
TOOL, BORING, ISO 9 R 08, P40
TOOL, BORING, ISO 9 R 10, P40
TOOL, BORING, ISO 9 R 12, P20
TOOL, BORING, ISO 9 R 12, P40
TOOL, BORING, ISO 9 R 16, P40
TOOL, BORING, ISO 9 R 20, P40
TOOL, BORING, ISO 9 R 25, P40
TOOL, BORING, ISO 9 R 32, P40
TOOL, ST. TURN/GR.(V), 163 N 25X16, P20
TOOL, ST. TURN/GR.(V), 163 N 32X20, P20
TOOL, ST. TURN/GR.(V), 163 N 25X16, P40
TOOL, ST. TURN/GR.(V), 163 N 32X20, P40
TOOL, ST. THREAD., 165 R 10X10, 55, P40
TOOL, ST. THREAD., 165 R 32X32, 55, P40
TOOL, ST. THREAD., 165 R 16X10, 55, P40
TOOL, ST. THREAD., 165 R 20X12, 55, P40
TOOL, ST. THREAD., 165 R 10X10, 60, P40
TOOL, ST. THREAD., 165 R 16X16, 60, P40
TOOL, ST. THREAD., 165 R 20X20, 60, P40
TOOL, ST. THREAD., 165 R 25X25, 60, P40
TOOL, ST. THREAD., 165 R 32X32, 60, P40
TOOL, ST. THREAD., 165 R 16X10, 60, P40
TOOL, ST. THREAD., 165 R 20X12, 60, P40
TOOL, ST. THREAD., 165 R 25X16, 60, P40
TOOL, ST. THREAD., 165 L 10X10, 55, P40
TOOL, ST. THREAD., 165 L 25X25, 55, P40
TOOL, ST. THREAD., 165 L 32X32, 55, P40
TOOL, ST. THREAD., 165 L 16X10, 55, P40
TOOL, ST. THREAD., 165 L 12X12, 60, P40
TOOL, ST. THREAD., 165 L 16X10, 60, P40
TOOL, ST. THREAD., 165 L 20X12, 60, P40
TOOL, ST. THREAD., 165 L 25X16, 60, P40
TOOL, ST. THREAD., 165 R 12X12, 55, P40
TOOL, INT. TH., 166 R 12X12, 60, P40
DRILL,TWIST,STRAIGHT SHANK,HSS,3mm
DRILL,TWIST,STRAIGHT SHANK,HSS,3.5MM
DRILL,TWIST,STRAIGHT SHANK,HSS,4.5MM
DRILL,TWIST,STRAIGHT SHANK,HSS,5.5MM
DRILL,TWIST,STRAIGHT SHANK,HSS,6.5MM
DRILL,TWIST,STRAIGHT SHANK,HSS,7mm
DRILL,TWIST,STRAIGHT SHANK,HSS,7.5MM
DRILL,TWIST,STRAIGHT SHANK,HSS,8mm
DRILL,TWIST,TAPER SHANK,HSS,4.0mm
DRILL,TWIST,TAPER SHANK,HSS,5.0mm
DRILL,TWIST,TAPER SHANK,HSS,6.0mm
DRILL,TWIST,TAPER SHANK,HSS,51MM
DRILL,TWIST,TAPER SHANK,HSS,52MM
DRILL,TWIST,TAPER SHANK,HSS,53MM
DRILL,TWIST,TAPER SHANK,HSS,54MM
DRILL,TWIST,TAPER SHANK,HSS,55MM
DRILL,TWIST,TAPER SHANK,HSS,56MM
DRILL,TWIST,TAPER SHANK,HSS,58MM
DRILL,TWIST,TAPER SHANK,HSS,60MM
DRILL,TWIST,TAPER SHANK,HSS,64MM
TWIST DRILL,HSS, TAPER SHANK 65MM
END MILL,PARALLEL SHANK,HSS,3MM
END MILL,PARALLEL SHANK,HSS,4MM
END MILL,PARALLEL SHANK,HSS,5MM
END MILL,PARALLEL SHANK,HSS,6MM
END MILL,PARALLEL SHANK,HSS,7MM
END MILL,PARALLEL SHANK,HSS,8MM
END MILL,PARALLEL SHANK,HSS,10MM
END MILL,PARALLEL SHANK,HSS,12MM
END MILL,PARALLEL SHANK,HSS,14MM
END MILL,PARALLEL SHANK,HSS,16MM
END MILL,PARALLEL SHANK,HSS,18MM
END MILL CUTTER,PARALLEL SHANK,HSS,20MM
END MILL CUTTER,PARALLEL SHANK,22MM
END MILL,PARALLEL SHANK,HSS,24MM
END MILL,PARALLEL SHANK,HSS,25MM
END MILL,PARALLEL SHANK,HSS,26MM
END MILL,PARALLEL SHANK,HSS,27MM
END MILL,PARALLEL SHANK,HSS,28MM
END MILL,PARALLEL SHANK,HSS,29MM
END MILL,PARALLEL SHANK,HSS,30MM
END MILL,PARALLEL SHANK,HSS,31MM
END MILL,PARALLEL SHANK,HSS,32MM
END MILL,PARALLEL SHANK,HSS,33MM
END MILL,PARALLEL SHANK,HSS,35MM
CORE CUTTER BIT,14 MM
CORE CUTTER BIT,16 MM
CORE CUTTER BIT,18 MM
CORE CUTTER BIT,20 MM
CORE CUTTER BIT,22 MM
CORE CUTTER BIT,24 MM
CORE CUTTER BIT,25 MM
CORE CUTTER BIT,26 MM
CORE CUTTER BIT,27 MM
CORE CUTTER BIT,28 MM
CORE CUTTER BIT,29 MM
CORE CUTTER BIT,30 MM
CORE CUTTER BIT,31 MM
CORE CUTTER BIT,32 MM
CORE CUTTER BIT,33 MM
CORE CUTTER BIT,34 MM
CORE CUTTER BIT,35 MM
COLLET, MILLING, ROUND, 3MM, ISO-50
COLLET, MILLING, ROUND, 4MM, ISO-50
COLLET, MILLING, ROUND, 5MM, ISO-50
COLLET, MILLING, ROUND, 6MM, ISO-50
COLLET, MILLING, ROUND, 7MM, ISO-50
COLLET, MILLING, ROUND, 8MM, ISO-50
COLLET, MILLING, ROUND, 9MM, ISO-50
COLLET, MILLING, ROUND, 10MM, ISO-50
COLLET, MILLING, ROUND, 12MM, ISO-50
COLLET, MILLING, ROUND, 14MM, ISO-50
COLLET, MILLING, ROUND, 16MM, ISO-50
COLLET, MILLING, ROUND, 18MM, ISO-50
COLLET, MILLING, ROUND, 19MM, ISO-50
COLLET, MILLING, ROUND, 20MM, ISO-50
COLLET, MILLING, ROUND, 21MM, ISO-50
COLLET, MILLING, ROUND, 22MM, ISO-50
COLLET, MILLING, ROUND, 23MM, ISO-50
COLLET, MILLING, ROUND, 24MM, ISO-50
COLLET, MILLING, ROUND, 25MM, ISO-50
COLLET, MILLING, ROUND, 26MM, ISO-50
COLLET, MILLING, ROUND, 27MM, ISO-50
COLLET, MILLING, ROUND, 28MM, ISO-50
COLLET, MILLING, ROUND, 29MM, ISO-50
COLLET, MILLING, ROUND, 30MM, ISO-50
COLLET, MILLING, ROUND, 31MM, ISO-50
COLLET, MILLING, ROUND, 32MM, ISO-50
COLLET, MILLING, ROUND, 33MM, ISO-50
COLLET, MILLING, ROUND, 34MM, ISO-50
COLLET, MILLING, ROUND, 35MM, ISO-50
COLLET, MILLING, ROUND, 36MM, ISO-50
COLLET, MILLING, ROUND, 37MM, ISO-50
COLLET, MILLING, ROUND, 38MM, ISO-50
MILLING MACHINE SHOULDER CUTTER
MILLING MACHINE SHOULDER CUTTER INSERT
MILLING MACHINE SHOLDR CUTTER ADAPTOR
DRILL,TWIST,STRAIGHT SHANK,HSS,2mm
DRILL,TWIST,STRAIGHT SHANK,HSS,2.5mm
DRILL,TWIST,STRAIGHT SHANK,HSS,8.5MM
DRILL,TWIST,STRAIGHT SHANK,HSS,9mm
DRILL,TWIST,STRAIGHT SHANK,HSS,10mm
TAP,HAND,HSS, 4MMX0.7
TAP,HAND,HSS,5MMX0.8
TAP,HAND,HSS,6MMX1.0
TAP,HAND,HSS,8MMX1.25
TAP,HAND,HSS,10MMX1.5
TAP,HAND,HSS,12MMX1.75
TAP SET M4 X 0.7MM
TAP SET M5 X 0.8MM
TAP SET M6 X 1MM
TAP SET M8 X 1.25MM
TAP SET M10 X 1.5MM
DIE NUT,METRIC,16mm,2mmPITCH
SMITH ENGINEERING COMPANY
MsTejwala Engineering Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .