SPECIAL REPAIRS TO TOILETS NEAR BLDG NO. IP 03, AND CERTAIN B/R REVENUE / MINOR WORKS UNDER THE AOR OF GE DEOLALI

Amount

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified and directed.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets spaced exc. 15 cm complete all as specified and directed.

Dismantling unframed work of timber scantlings 40 sqcm and over in any section, in any position complete all as specified and directed.

S & F rolled mild steel work in tubular trusses purlins, rafters etc including special shaped washer etc. complete using ERW or induction butt weided tubes conforming to IS 1161-1998 grade St 240 complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick manglore pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for two coats of synthetic enamel paint on new steel surfaces over a coat of priming with red oxide incl. preparation of new surfaces.

Demolition of wall and ceiling board (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and directed.

S&F powder coated aluminum alloy interlocking snap grid of size 605mm x 605mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 605mm x 605mm including 6.00mm dia GI wire for hanging fixed to roof slab or fillet complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and directed.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:4 finished even and smooth ( without using extra cement ) with sagol finish.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:4 finished even and smooth ( without using extra cement ).

Demolition of Brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar.

M&L for brick work with fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size bricks.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and incl. 1.5mm thick wall care putty all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer all as specified and directed.

Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed.

S & F powder coated aluminium sliding window/ventilator ,two track shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including steel wire mesh and frosted glass or ordinary glazing quality of 5mm thick size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and directed.

M & L for factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of M.S.tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour 'PVC'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M & L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S & F Aluminium handles, cast type, anodised handle 150 mm

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 100 mm

S & F Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm length.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregated as in coping, bed block for hold fast, surface channel/benching and the like including weathering, slightly rounded chamfered angles and throating complete including necessary formwork all as specified and directed .

S & F Mild steel as in Hold fasts Fe.290.Gde-E-165

Demolition of cement concrete(un reinforced) in ground floors & pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded aggregate ) as a Plinth protection complete all as specified and directed..

Dismantling floor ,hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles all as specified and directed.

M&L for Glazed ceramic coloured tiles of size. 300x450x5 to 6mm thick on vertical surfaces of walls such as skirting dado etc over and incl. 10mm thick backcoat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

S & F in repairs 15 mm dia stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated complete all as specified and directed.

S & F 32 mm dia low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F in repairs oval shape vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified and directed.

S & F in repairs 10 Litrs PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm dia pipe complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm dia pipe complete all as specified and directed.

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

M & L for Cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

M & L for Granite 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified and directed.

M & L for Machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 500 & not exc 1000 ltrs.

Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified and directed.

S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm with grating and union for discharge pipe (excluding flushing cistern ) including waste fitting, waste pipe complete all as specified and directed.

Demolition of cement concrete reinforced Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work

S&F Health faucet including MS/anodised hanging device fixed in repairs complete all as specified and directed.

S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.

S&F in repair wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore fancy type best quality as per sample approved by GE fixed in reapirs.

S&F 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-charge.

Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge..

S&F for PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and directed.

S&F for PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and directed.

S&F for PVC (SWR) bends with access door 110 mm dia complete all as specified and directed.

Ditto as per item No above but 75 mm dia.

S&F PVC (SWR) plain bend 110 mm dia complete all as specified and directed.

S&F PVC (SWR) plain bend 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

Demolition and breakingup drain pipe internal dia 150 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 150mm salt glazed stone ware drain pipes grade 'A' laid in trenches & jointed as specified complete

M & L for cement concrete 1:4:8 type D-2(using 40mm graded stone aggregate) as in concrete bed to drain pipes 150mm including packing under & haunching against the sides of pipes after they are laid & tested all as specified and directed.

Demolition of cement concrete (reinforced) in floors/pavings, (below or above ground level) n exc 15 cm thick all as specified and directed .

M & L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM 1:4 as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) complete all as specified and directed.

S & F mild steel deformed bars Fe 500, 6mm to 8mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping columns, hooking ends & binding with & including MS wire (annealed) not less than 0.9mm dia of or securing with clips complete all as specified and directed.

Supply only integral water proofing compound .

S&F chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/ lose soil.

Excavation over areas not exc 1.5 mtr deep and getting out in any type of soil all as specified and directed.

Excavation over areas exc 1.5 and n.exc 3.00 mtr deep and getting out in any type of soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soils.

Removal of excavated soils n exc. 50m and depositing where directed at level n exc. 1.5M above the starting point. all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregated as in foundation, filling and mass concrete all as specified and directed .

M&L for RCC 1:2:4 type B1 (using 20mm graded aggregate) as in slabs and finished all exposed surfaces of concrete even and fair without using extra cement. (Note:- Formwork and reinforcement shall be measured and paid separately)

Providing of formwork to soffit of suspended slabs for fair finished surfaces of concrete.

S&F Mild steel TMT bars 10 dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips as in reinforcement concrete.

M & L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

S&F Prefab FRP sheet water proof cabinet shape Portable toilet consisting of one compartment with Western/indian type WC, in built water connection, tap, light etc including connection to existing electric supply with not more than 10 mtr PVC conduit pipe & single core sheathed cable continuous 1.5sqmm, FRLS copper cable for earth wire complete all as specified and directed. Note: Make/Model as approved by GE Devlali

Excavation in trenches, in hard/dense soil n. exc. 1.50 Mtr wide and n.exc 1.50 Mtr in depth for foundation manholes etc n.exc. 10 Sqm on plan and getting out

M&L for hardcore of broken stone gangue n. exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface. Hardcore or broken stone or boulders.

M&L Moorum/red bajri for side berms Spreading and leveling in layers n.exc 15cm thick well ramming including watering and consolidation with power roller all as specified and directed.

Three coat of white wash on newly plastered surface incl preparation of surface

Excavation in post holes (or similar holes) in any type of soil each n.exc 0.5 cum getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers n.exc 25 cm , watering and removing surplus soil to a distance distance n.exc 50 m and making good the surface complete all as specified and directed.

M & L for Cement concrete Type B2 1:2:4 (40 mm graded aggregate) in foundations, filling and mass-concrete.

Supply and lay reinforced concrete drain pipe class NP-2, 150mm bore laid in trenches and jointed complete with collars etc complete all as specified and directed.

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting soft / loose soil.

Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittings and making good disturbed surfaces of walls, floor etc.complete all as specified and directed.

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and directed for :-

(a) One Light point controlled by one switch

(b) One fan point controlled by one switch

(c) One 5 pin socket outlet. 5 Amps on the same board.

(d) One 5 pin socket outlet. 5 Amps on the independent board

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix switch piano flush type single pole two way 5 Amps complete all all as specified and directed.

Supply and fix switch socket combination 5 pin 5 Amps flush type (multi purpose ) complete all as specified and directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and directed.

S & F in replacement of lamp angle/batten holder Bakelite complete all as specified and directed.

S & F in replacement double door sheet metal enclosures factory made DBs 8 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and directed.Make:-Legrand,Cat No:5076 11 or equilavent in Siemens/L&T

S&F MCBs Single Pole of 240 volts 5-32 Amps,10KA Capacity, 'C' Series of Make:-Legrand,Cat No: 4085-87 to 90,92,93,94,95 or eqivalent in Siemens/L&T

S&F MCBs Single pole + Neutral 240 Volts,32-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-17 to 20 or equivalent in siemens/L&T

S&F Decorative ultra slim linear LED lighting with extruded polycarbonate,environment friendly,energy efficient E-LITE LED PRIDE PLUS 18W LED 6000K Make:-Havells Cat Part num:- LHEXBLP7PN1W018 or equivalent

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground all as specified and directed (earth pit not less than 2.25m below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in Electrical Plate No. 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed

S&F LED Bldg Security light Endura City liner uber having long life versalite pressure die-cast aluminium IP66 roadway luminaries with high power 20W LED as light source with acrylic cover Make:-Havells LHEWEBP7PL6S020 or equivalent in Bajaj/Philips/wipro.

M & L for bracket made out of GI tubing 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50mm wide 5mm thick flat iron with M.S. nuts, bolts 75 mm long 12 mm dia -4 Nos & flat washer (3mm thick) 01 No. for each including preparation of steel surfaces and painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and directed.

S&F XLPE insulated armoured heavy duty electric cables with aluminium conductor,1100 volts grade, cross sectional area 10 sqmm 2 core

M&L Dry sand , filling in trenches around under ground cable complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

S&F Post top,spun aluminium landscape luminare with any high power LED 25W incl taking down U/S light type all as specified and directed.Make:-Havells (Cat No LHEVBPG7PN66K025) or equivalent in Bajaj/Philips/wipro

S&F Linear & compact 9W LED 6000k mirror Light with decorative grey end caps,Pokycarbonate body and ripped opal diffuser. Make:-Havells Cat Part No:-LHEXARP7PN1W009 ,or equivalent in Bajaj/Philips/wipro.

Taking down old u/s exhaust fan any type and depositing to E/M Store yard and supply and fix new heavy duty exhaust fan, metal body, 450mm sweep,1400 RPM powder coated with all accessories and electric connection all as specified and directed.Make:-Havells Turbo Force ,Bajaj, Khaitan

Note: Amount of sch of credit of Rs.9,833.00/-will be deducted from total amount of BOQ.

M/s. JBSR ENTERPRISES.

M/S GURBAX AND CO