Repair/renovation to various Non Residential Buildings under Division No III Shimla (SH Conversion of pantry attached with Gymnasium into Toilet/Dressing Room for Honble Judges of Himachal Pradesh High court Shimla)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Excavation in drains and channels etc. in all kinds of earth work including spade work, pick work, jumper work, blasting work and chiselling / wedging out of rock etc. including dressing of sides and bed and disposing of excavated earth upto all leads and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge within all leads and lifts

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres Lead)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations cement mortar 1:4 (1 cement : 4 coarse sand) complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6(1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., 600 x 600mm. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and laying digital Vitrified tiles in different sizes(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete 600x600 mm. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. 15 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore

P/F PVC P-trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete a) 110 mm

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete a) 110mm dia.(Type B)

75mm dia complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing PVC single equal branch plain ISI marked etc complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. 110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. . 110 mm dia

Providing and fixing PVC degree bend ISI marked including fixing with approved adhesive etc complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. . 110 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. . 110 mm dia

Providing and fixing gate valve 15mm nominal size G.I. pipe including cutting and threading the pipe etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. (New work) :15 mm nominal bore

Providing and fixing Hindware make white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :Cat No: 92048 (S-22) Star Rated Starwhite

Providing and fixing Hinndware make centeral hole wash basin with C.I. brackets, 1 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:VIENNE OVAL Size : 51 x 43 cm Cat. No.: 10038

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. Hindware make Cat. Ped. 11019 Starwhite.

Providing and fixing 15mm dia C.P. brass Angle cock ESS-Ess makecomplete including carriage of materials in all leads and lift as per direction of Engineer in Charge. :-C-204B*

Providing and fixing uplasticised PVC connection pipe with brass unions complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. :15 mm nominal bore 45 cm length .

Providing and fixing CP waste coupling 32mm Dia for wash basin complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. Jaquar make or Equivalent in all leads and lifts.

Providing and fixing Polyvinyl Chloride(PVC) waste pipes 32mm Dia for wash basin or sink complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing 15mm nominal bore C.P. brass bib tap with capstan head complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing 60cm x 45cm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing toilet paper holder : C.P. brass complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixinge towel ring complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour in all leads and lifts.

Providing and fixing Jaquar make or equivalent towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing heath faucet Jaquar make or equivalent complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing Soap dispenser viking make or equivalent in all leads and lifts complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and applying white cement based putty of average thickness 1 mm on wood and wood based surfacesof approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with plastic emulsion of approved brand and manufacture to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing ACP sheet 4mm thick in panelled and glazed door shutter and partition fixed with self drilling screws etc. complete by the Engineer-in-Charge including carriage of materials within all leads and lifts.

Providing and fixing aluminium sliding door bolts, ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. 150x10 mm complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts.

Providing and fixing looking mirror of size 600mmx1800mm Over wooden frame of full body height (superior quality) including backing support & fixing with screws etc at site as directed by Engineer-in-charge including carriage of materials within all leads & lifts.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. . Triple strip vertical type

Providing and fixing Brass handles with screws etc. complete: 150MM complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.