Repair and Maintenance of PHQ Building and Kavaratti Police Station and Annex Building

Amount

Demolishingcementconcretemanually/bymechanicalmeans including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix

Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture ) of first quality confirming to IS:15622 of approved make,in colours such as White ,ivory,Grey,Fume red brown,laid on 20 mm thick cement mortar 1:4 ( 1cement, 4 metal sand ) and joining with white cement and matching pigment etc... complete.

9.3 Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3 metal sand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles (premium quality ) in diffren sizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, laid 20mm thick cement mortar 1:4 ( 1 cement 4 metal sand ) including grouting the joints withwhitecementandmatchingpigmentsetc.. complete.( flooring) (Khajaria polished vitrified tiles or equivalent) Size of Tiles 800 x 800 mm

Providingand laying vitrified (premium quality) indiffrensizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, in skirting,riser of steps,over 12 mm thick bed of cement mortar 1:3 ( 1 cement 3 metal sand ) including grouting the joints with white cement and matching pigments etc.. complete. (Khajaria polished vitrified tiles or equivalent) Size of Tiles 800 x 800 mm

Providing anf fixing white vitrous China water closet Pedestal pan (European) type WC pan swith white plastic seatandlidandrubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC Pan with Plastic seat and lid

Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.

Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.

Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour 600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm ,weighing not less than 190 gms.

Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating.

Providing and fixing health faucet of approved quality and manufacture complete.

Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85gms.

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. Internal work 110 mm nominal bore ( 6 kg/sqcms)

75 mm nominal bore ( 6 kg/sqcms)

25 mm nominal bore ( 6 kg/sqcms)

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work 32 mm nominal bore

110 mm nominal bore

Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete. 15 mm nominal bore

Providing and fixing C.P. Brass stopcook of approved quality and manufacture complete. 12.6.1 15 mm nominal bore

Providing and fixing C.P. shower rose with 15 to 20mm intlet, 100 mm dia.

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mmrigidPVCfoamsheetmitredatcornersandjoinedwith 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The doorframe to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-inCharge.

Providing and fixing to existing doorframes. 25mm thick PVC flush door shutters upto 737mm width of colour and shade as approvedbyEngineer-in-charge madeoutofa onepiece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An MS tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures’ specification and drawing to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Cement concrete block (machine moulded) masonry in in Foundation and plinth in CM 1:6 with blocks of size 40cmx20cmx15cm.

Providing and fixing hand rail of approved size by welding etc. to steelladder rail-ing, balcony railing andstaircase railing including applying a priming coat of approved steel primer.(G.I Pipe )

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately )

Providingandfixing35mmthickpanelled,glazedorpanelledand glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent ( Double leef shettre

Providing and fixing karimaruthu wood or equivalent 25 mm squre wooden bars at required spacing in wooden frames of windows and clerestory windows

Providing and fixing Flush doorshutters confirming to IS:2202 (part.I) decorative type,core of block board construction frame of first cladd hard wood and well matched firdt class teak 3 ply veneering with vertical grains or cross band s and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.

Finishing walls with textured exterior paint of required shade: Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

Filling with Quarry waste/debris ( Dismantled materials issued by department) in trenches, plinth, sides of foundations etc layers not exeeding 20cm plinth, side od foundations etc layers not exceeding 20cm and watering lead up to 50 mtr and lift up to 1.50mtr including loading , transportation and unloading at site.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of Fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes Kg 262.56

Providing Aluminium sheet roofing fixed with .galvnized iron Jor L hooks and 8mm dia C.I plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick.

Providing and fixing PVC pipe half round eaves gutter with M.S brackets including bolts and nuts and necessary fitting as per approved brand and manufacture etc ..complete 200 mm (10kg/sqcms)

ABDUL RAFEEKH P V

UMMER BAITHULHUDA

OCEAN BUILDERS

bazil ali

SAMEER RIYAS

Abdul Latheef T P

Akbarali D N