REPAIR TO PATH, CULVERT, PARAPETS AND HARDSTANDING AT NIWARU MIL STN UNDER GE JAIPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete all as specified and directed by Engineer-in- Charge.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for culvert,complete all as specified and directed by Engineer-in- Charge.

M&L 75 mm thck cement concrete 1:4:8 type D2 using 40mm graded stone aggregates as in sub base,complete all as specified and directed by Engineer-in- Charge.

M&L 50 mm thck cement concrete 1:2:4 typeB-1 using 20mm graded stone aggregates as in paving laid in bays,complete all as specified and directed by Engineer-in- Charge.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound with saling compound grade A,complete all as specified and directed by Engineer-in- Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed by Engineer-in- Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6,complete all as specified and directed by Engineer-in- Charge.

M&L Cement concrete 1:4:8 (40mm graded stone aggregate) as in foundationn, filling and mass concrete, complete all as specified and directed by Engineer-in- Charge.

M&L for walling of RR, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6,complete all as specified and directed by Engineer-in- Charge.

M&L of use and waste of formwork for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick for rough finished,complete all as specified and directed by Engineer-in- Charge..

M&L of use and waste of formwork for sides of Beam etc for rough finished,complete all as specified and directed by Engineer-in- Charge.

M&L of RCC M-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engineer-in- Charge..

M&L TMT bar 10mm dia and over, cut to lenth bent to shape required including cranking bending spirally including mild steel wo\ire not less than 0.9mm dia,complete all as specified and directed by Engineer-in- Charge.

M&L TMT bar 6to 8mm dia , cut to lenth bent to shape required including cranking bending spirally including mild steel wo\ire not less than 0.9mm dia, complete all as specified and directed by Engineer-in- Charge.

M&L for reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate),complete all as specified and directed by Engineer-in- Charge.

M&L for Hard core, broken to gauge n exc 63 mm,complete all as specified and directed by Engineer-in- Charge.

M & L Providing cement concrete in copings type C1 built in 1:3:6,complete all as specified and directed by Engineer-in- Charge.

M&L25 mm thick fine sand Cushioning over PCC, spread, compacted, complete all as specified and directed by Engineer-in- Charge.

M&L 60mm thick machine pressed precast concrete interlocking paver blocks with grey cement and pigments, any shape & size conforming to IS 15658-2006 of M-35 grade (for Hardstanding),complete all as specified and directed by Engineer-in- Charge.

Taking down of Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc,complete all as specified and directed by Engineer-in- Charge.

M&L for rendering 10mm thick in cement mortar 1:4 on fair face of brick work or concrete surfaces, finished even and smooth surface without using extra cement,complete all as specified and directed by Engineer-in- Charge.

M&L for preparation of newly plastered surfaces of walls, soffits of chajjas,cornices etc and applying two coat of cement base paint and tint over priming plastered and other surfaces with alkali resistant priming, complete all as specified and directed by Engineer-in- Charge.

PUSHPA G ENTERPRISES (BID ID -3089992)

M/S ROHIT CONSTRUCTION (BID ID -3090831)

J.J.ENGINEERING (BID ID -3089203)