Special repairs to Fire Extinguisher Refilling, Painting for OP, water supply, sanitary, doors, windows and other repair arrangements for Male ward, OP,OT, RT and Kitchen in Government Arignar Anna Memorial Cancer Hospital at Karapettai, Kancheepur

Dismantling clearing away and carfuly stacking materials useful for reuse the existing Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs etc. complete as per the standard specification

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Removing the drainage silt under water from the manholes by engaging scavengers, conveying the removal silt away from the site and drainage in low lying area. The inlet pipes of manhole from the building is to be cleaned completely by the bamboo sticks.

Removal of blockage in drainage pipe line at maximum depth including earthwork excavation and cut opening of the pipe line and redoing the pipe line in the alignment after removal of blockage including engaging skilled scavenger for drainage work drainage work supplying and making bamboo stick bundies of drainage block removal in pipe line and the silt is to be conveyed and dumped in low lying area etc., complete.

Levelling the uneven surfaces by removing the heaps of earth etc., by plugging out the tree trunk with roots below the ground level and removing the bushes using JCB Machinery etc., complete complying with standard spefication and as directed by the departmental officers.

Dewatering using 20HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.

Supplying, laying and jointing G.I. Pipes of approved quality and best variety of “B” class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with neceSORay brick work / concrete and plastering wherever necessory with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works - External water supply - above Ground Level

32mm dia GI pipe

Easaneing the Doors & Windows removing and refining including Furniture fittings etc, complete,.

Supplying door and window fittings such as aldrops, handles, tower bolts, hinges, stoppers, locks, etc., and toilet fittings such as taps, flushing tanks, pipelines, traps, wash basins, hoses, etc., all of approved make and ISI quality. All items shall be supplied in standard sizes with necessary screws and accessories. Rate is exclusive of labour charges, complete as directed by the departmental officers.

PVC low level flushing tank with all internal fittings - White - 7.5 litre capacity

Engaging the following labours – carpenter, plumber, and helper – for fixing door and window fittings such as aldrops, handles, tower bolts, hinges, stoppers, locks, etc. Including toilet fittings such as taps, flushing tanks, pipelines, traps, wash basins, hoses, etc. All works shall be executed as per standard practice and under the direction of departmental officers.

Carpenter-I Class

Carpenter-II Class

Plumber-I Class

Plumber-II Class

Mazdoor-I Class

Supplying, Fabricating, erecting and fixing Hilux (or) equivalent Gyp Board FALSE CELING upto a ceiling height of 4.50 m from floor level using Hilux board Plain sheet 10mm thick which includes shaped GI channels of size 25 x 25 x 0.50 mm thick suspended from ceilling at 1.2 m both longitudinal and cross vertical support and fixing shaped GI channels of size 50 x 30 x 0.50 mm and 150 x 10 x 0.50 mm thick at 0.60m centre longitudinal and cross direction for vertical supports and fixing U shaped GI channels of size 50 x 30 x 0.50 mm thick and 50 x 10 x 0.50 mm thick at 0.60 m centre to centre in cross direction and respectively for horizantal supports of zig - zag pattern and fixing of Gyp board in the panel provided in the desing pattern given and sprating the standard specification and as directed by the departmental officers. The rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap/ Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

15mm dia CP screw down tap

15mm dia Elbow action tap

15mm dia CP Swan Neck Tap

Supplying of Medium Density Fibre (MDF) Board - Exterior Grade - both sides pre-laminated, 12mm thick etc,

Providing and Applying Polyurethane hybrid liquid applied GRIHA certified Waterproofing coating with flutyne protection technology, single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof having Tile or any non-porous surface applied @ 1.5 l/m2 in 2 coats to achieve 1mm DFT, having tensile strength with 45 gsm glass fibre mesh 4N/mm2 confirming to ASTM D 412; Elongation at break ≥ 300% and Crack bridging ability up to 3mm, SRI Index 106 as per ASTM E 1980- 01, Water permeability @5 bar – Nil as per EN12390 - 8:2019, including surface preparation, priming the surface with single component high-performance waterborne tile primer which is suitable for non - porous surface at a rate of 0.14 L/m2 and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification.

Supplying and erection of 5.00 HP /Three Phase, sub mergible pump set in borewell approved make and quality with ISI mark with necessary accessories and fixed with delivery pipe errected in the borewell with necessary clamp etc., with following additional accssories1 No of 3 Phase Star Delta Starter of 63 AMPS of approved quality and make with ISI mark 1 No of 3 Phase 63 AMPS Main Switch of approved quality and make with ISI mark. 1 No of peventor of approved quality and make with ISI mark1 No of panel board of required size with indicator fuse unit voltmeter with necessary provision toaccomodate the starter and mini starter etc.1 No of capacitor with board and proper earthing as per I E rules etc., complete and tesing the pumset and trail run for 10 days.

Supplying and fixing of 6mm square submergible cable of ISI make approved by the departmental officer etc, complete.

Servicing and refilling of 6 Kg ABC (Stored Pressure) Fire Extinguisher by replacing Mono Ammonium Phosphate powder, pressurising with Nitrogen gas, checking gauge, hose and valve, repainting and carrying out hydrostatic testing wherever due, as per IS 2190:2010.

Servicing and refilling of 4.5 Kg CO₂ Fire Extinguisher including refilling with approved CO₂ gas, weighment check, valve and discharge horn inspection, repainting and hydrostatic testing wherever required as per IS 2190:2010.

Servicing and refilling of 9 Litres Water CO₂ Fire Extinguisher by refilling with clean water, providing CO₂ cartridge, checking head cap, hose and fittings, repainting and hydrostatic testing wherever due as per IS 2190:2010.

Servicing and refilling of 2 Kg CO₂ Fire Extinguisher including refilling with approved CO₂ gas, weighment verification, valve inspection, repainting and hydrostatic testing wherever required as per IS 2190:2010.

SUB TOTAL