WBWRDD EE AM BURDWAN eNIT-40 CS 2025-26

Laying of Water Transmission Arrangment (WTA). Please see the details in Sheet WTA

Procurement of UPVC; M.S. / C.I. ; ERW / GI pipes etc Materials and other Fittings etc. Please see the details in Sheet Material Procurement

Please Enable Macros to View BoQ information

BoQ_Ver3.0

Tender Reference No : WBWRDD/EEAM/BDN/eNIT-40/CS/2025-26

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

Laying of Water Transmission Arrangment (WTA).

Earth work in excavation of field trenches as per designed section & alignment for laying of pipe lines (PVC, RCC, ACP etc) upto a depth of 1500 mm in all sorts of soils including removing, spreading or stacking extra earth as directed.The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom as required complete. [Vide Page no.14 , item no.1 (2.10) of Chapter-VI of WRDD Schedule 2018]

Laying of UPVC pipes of different diameters within field trenches in curve/ straight line including using UPVC fittings, Viz. Horizontal and Vertical Bends, riser pipes, Tee, Reducer etc.and making leak proof joints with couplers after roghening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipes, fittings and solvent cement to be supplied by deptt.) all complete as per direction of Engineer-In- charge. [Vide Page no.14 , item no.1(A) (2.20) of Chapter-VI of WRDD Schedule 2018] i)315 mm OD

Laying of UPVC pipes of different diameters within field trenches in curve/ straight line including using UPVC fittings, Viz. Horizontal and Vertical Bends, riser pipes, Tee, Reducer etc.and making leak proof joints with couplers after roghening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipes, fittings and solvent cement to be supplied by deptt.) all complete as per direction of Engineer-In- charge. [Vide Page no.14 , item no.1(A) (2.20) of Chapter-VI of WRDD Schedule 2018] ii)200 mm OD

Laying of UPVC pipes of different diameters within field trenches in curve/ straight line including using UPVC fittings, Viz. Horizontal and Vertical Bends, riser pipes, Tee, Reducer etc.and making leak proof joints with couplers after roghening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipes, fittings and solvent cement to be supplied by deptt.) all complete as per direction of Engineer-In- charge. [Vide Page no.14 , item no.1(A) (2.20) of Chapter-VI of WRDD Schedule 2018] iii) 140 mm. OD.

Earth work in filling in trenches after laying of pipe lines (PVC, RCC, ACP etc) or plinth with good earth, in layers not exceeding 225 mm. including watering and ramming etc. layer by layer complete. (Payment will be made on the basis of measurement of finished quantity of work). [Vide Page no.14 , item no.2 (2.10) of Chapter-VI of WRDD Schedule 2018]

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. [Vide Page no.1, item no.2(a)(Sec-1.A) of PWD Schedule(Vol-I) 2017] (a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) [Vide Page no.1, item no.3(a)(Sec-1.A) of PWD Schedule(Vol-I ) 2017] (a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water, ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity) [Vide Page no.2, item no.4(A)(Sec-1.A) of PWD Schedule(Vol-I) 2017 ,5th CORRIGENDA & ADDENDA]

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. [Vide Page no.1, Sl no.1 of PWD Schedule(Vol-I) 2017, 3rd CORRIGENDA & ADDENDA]

Ordinary Cement Concrete (mix 1:2:4) with graded stone chips (20 mm. normal size) excluding shuttering and reinforcement, if any, in ground floor. as per relevent IS Code. a) Pakur Variety [Vide Page no.10, Sl no.27 of PWD Schedule(Vol-I ) 2017, 3rd CORRIGENDA & ADDENDA]

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) [When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht.shall be allowed under 12 (e) for every 4 m or part thereof] (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge. [Vide Page no.42, item no.36(A)(Sec-1.C) of PWD Schedule(Vol-I ) 2017]

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation & plinth [Vide Page no.1, Sl no. 4 of PWD Schedule, 3rd CORRIGENDA & ADDENDA]

125 mm. thick brickwork with 1st class bricks in cement mortar (1 : 4) in ground floor. [Vide Page no.16, item no. 16 of PWD Schedule, 3rd CORRIGENDA & ADDENDA]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints, including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).[Excluding cost of chipping over concrete surface] [Vide Page no.49, Sl no. 1 of PWD Schedule, 3rd CORRIGENDA & ADDENDA] (ii) with (1:4) cement mortar, (b) 15 mm. thick plaster

Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE : Cement 0.152 cu.m. per 100 sq.m. [Vide Page no.192, item no. 15 of PWD Schedule]

Labour Charges for fitting, fixing and laying, where necessary of following M.S / G.I. / E.R.W. pipes and accessories (to be supplied departmentally) including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge. [Vide Page no.14 , item no.2 (2.20) of Chapter-VI of WRDD Schedule 2018] (i)(a) 150 mm. dia. ERW pipe.

Labour charges for fitting, fixing150 mm. Dia. Alfa-Alfa valve with 160mm. dia. P.V.C. riser pipe with the help of flanged P.V.C. tail-piece by joining the P.V.C. End of Tail-piece and riser pipe with coupler and flanged end of Tail-piece and Alfa-Alfa valve with rubber insertion, nuts and bolts etc. complete. [Vide Page no.15 , item no.3(2.20) of Chapter-VI of WRDD Schedule 2018]

Supplying, fitting and fixing including transportation of sign board for identifing the exact location of Major RLI scheme (one at road side and other at site) the board will be made of 3 mm thick MS plate of size 300 mm × 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-1) including cutting, welding and writting of both sides of Sign board. Base - Yellow, and words Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling. This will include materials and labour complete as per drawing and direction of EIC. [Vide Page no.17 , item no.17 (2.20) of Chapter-VI of WRDD Schedule 2018]

Installation / Erection of SurgeTank / Shore manifold (to be supplied from Deptt. free of cost) over a rigid base of ordinary cement concrete (1:2:4) with graded stone chips (20mm. nominal size) of pakur varity of 1250 mm X 1250 Each 2263.08 mm X 150 mm. over a single layer of brick flat soling and embedding the legs of the surge tank/shore manifold within the concrete base including cost of all materials and labour and as per direction of Engineer-in-Charge.(VIDE P NO-18, ITEM NO-5, WRDDSchedule 2018)

Testing of pipe line system against leakages by filling the distribution chamber with water and supplying water through the entire pipe line net work for at least 4 (four) hours by running the departmental Diesel Engine pumping set, including supplying necessary fuels & lubricants and hiring and transporting tools and plants all complete as per direction of Engineer-in-Charge. i) For Major R.L.I. [Vide Page no.16 , item no.7(b) (2.20) of Chapter-VI of WRDD Schedule 2018]

Sub-Total

Add 4% carriage except item no. 1.01,1.05,1.06 ,1.07 & 1.20.

Sub-Total

Add GST @18%

Cost of civil works excluding Labour welfare cess

Add Labour welfare cess @ 1%

Grand Total

Eight Lakh Nineteen Thousand &Four Only

Item Rate BoQ

BoQ_Ver3.0

Tender Reference No : WBWRDD/EEAM/BDN/eNIT-40/CS/2025-26

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

315 mm dia P.V.C pipe class-I ( with a loose matching coupler) marking IS No. 4985/2000 with latest amendments with free solvent cement.

200 mm. dia P.V.C. pipe Class- I ( with a loose matching coupler) marking IS No. 4985/ 2000 with latest amendments with free solvent cement.

140 mm. dia P.V.C. pipe Class- I ( with matching coupler ) marking IS No. 4985/2000 with latest amendments with free solvent cement.

140 mm. dia P.V.C. pipe Class-II ( with a loose matching coupler) marking IS No. 4985/ 2000 with latest amendments with free solvent cement.

200 mm dia P.V.C. Equal Tee with free solvent cement.IS 10124/2009 Part- 5 with latest amendment.

140 mm dia P.V.C. Equal Tee with free solvent cement.IS 10124/2009 Part- 5 with latest amendment.

315 mm. dia (IS.No. 10124/2009 Part- 6 with latest amendment,Thickness of Flange as per Table-1) F.T.P.

200 mm.. dia ( IS. No. 10124/ 2009 Part- 6 with latest amendment,Thickness of Flange as per Table-1) F.T.P.

160 mm. dia ( IS. No 10124/2009 Part- 6 with latest amendment,Thickness of Flange as per Table-1) F.T.P..

200 X 160 mm IS dia.P.V.C. Reducer (Class-II) with free solvent cement. IS 10124/2009 Part- 3 with latest amendment.

200 X 140 mm IS dia.P.V.C. Reducer (Class-II) with free solvent cement. IS 10124/2009 Part- 3 with latest amendment.

160 X 140 mm IS dia.P.V.C. Reducer (Class-II) with free solvent cement. IS 10124/2009 Part- 3 with latest amendment.

200 mm. dia 60º ( IS. No. 10124/2009 Part- 8 with latest amendment ) bend

140 mm. dia 90º (IS. No. 10124/ 2009 Part- 8 with latest amendment) bend

140 mm. dia 60º ( IS No. 10124/ 2009 Part- 8 with latest amendment ) bend

200 mm. dia IS. NO. 10124/ 2009 Part- 4 with latest amendment End cap.

140 mm. dia IS. NO. 10124/ 2009 Part- 4 with latest amendment End cap.

Extra Coupler for 315 mm. dia P.V.C. pipe (extra) IS. 10124/2009 with latest amendments with free solvent cement.

Extra Coupler for 200 mm. dia P.V.C. pipe ( extra) I.S. 10124/2009, Part- II with free solvent cement.

Extra Coupler for 140- mm. dia P.V.C. pipe (extra) I.S 10124/ 2009, Part- II with free solvent cement.

150 mm dia ISI marked P.V.C.Flexible Hose pipe as per IS 15265

Extra Solvent cement I.S. 14182-1994 with latest amendments

150 mm. dia I.S.I. IS 14846 mark and specification Pn- 1.4 ,C.I sluice valve

150 mm dia CI Alfa-Alfa Valve as per specification (IS 210) Nipple Type

150mm dia 90 degree G.I. Bend both end flanged duly ISI Marked as per IS 1239 Specification and flange as per IS 6392

80mm dia G.I screwed at one end and std flage at other end 3 mtr long

150 mm dia GALV. M.S. Flanged Pipe duly ISI Marked ,IS 1239 and flange as per IS 6392.

Supply of M.S. Shore Manifold as per drawing with painting made of 350 mm dia MS ERW Pipe 1.5 mtr. Long having 2 numbers of 150 mm diameter inlet and 3 number of 150 mm dia Outlet, all end flange welded, MS ERW Pipe conforming to IS 1161/2004 or IS 3589/2001, Heavy 8.0mm Thickness & IS:1239(Part-I), Medium 4.8mm thickness and MS Flange conforming to IS: 6392/71(Table-17) Painting: All internal and external surface

Supply of M.S. Shore Manifold as per drawing with painting made of 350 mm dia MS ERW Pipe 1.0 mtr. Long having 1 number of 350 mm diameter inlet and 2 number of 150 mm dia Outlet, all end flange welded, MS ERW Pipe conforming to IS 1161/2004 or IS 3589/2001, Heavy 8.0mm Thickness & IS:1239(Part-I), Medium 4.8mm thickness and MS Flange conforming to IS: 6392/71(Table-17) Painting: All internal and external surface

300mm dia 90 degree MS/G.I. Bend both end flanged as per IS 1239 Specification

300mm dia 90 degree MS/G.I. Bend one end flanged other end flange with free backing flange as per IS 1239 Specification

300 mm X 150mm MS flanged reducer (IS 1239)

150mm dia 90 degree G.I. one end flanged other end flange with free backing flange as per IS 1239 Specification

Supply and transportation of 150mm dia. C.I. Tail piece (one end groved and other end flanged) overall length (175 ± 15) mm with 7 nos groves

Supply and transportation of 150mm dia. C.I. Tail piece (both end grooved) overall length (350 ± 15) mm with 7 nos groves each side

Supply and Transportation of 150mm NB x 5 mm thick Rubber Insertion (Table-17 for raised surface of flange as per IS 6392/71) made from white rubber sheet reinforced with 2 ply cotton fabric with holes as per IS 638/79 with latest amendment, if any. With standard drilled holes.

Supply and Transportation of 200mm NB x 5 mm thick Rubber Insertion (Table-5 for raised surface of flange as per IS 6392/71) made from white rubber sheet reinforced with 2 ply cotton fabric with holes as per IS 638/79 with latest amendment, if any. With standard drilled holes.

Supply and transportation of 300mm NB x 5 mm thick Rubber Insertion (Table-11 for raised surface of flange as per IS 6392/71) made from white rubber sheet reinforced with 2 ply cotton fabric with holes as per IS 638/79 with latest amendment, if any. With standard drilled holes.

Supply and Transportation of 300mm NB x 5 mm thick Rubber Insertion (Table-5 for raised surface of flange as per IS 6392/71) made from white rubber sheet reinforced with 2 ply cotton fabric with holes as per IS 638/79 with latest amendment, if any. With standard drilled holes.

Supply and transportation of M 16 x 65 mm M.S. Hexagonal head bolts and nuts bearing IS -1363 (Part-I) / 1992 of product Grade-C latest amendments for bolts & IS-1363 (Part-3) /1992 of product Grade-C with latest amendments for nuts properties/ Clause for bolts -4.6 & for nuts -4.5. Both bolts & nuts are to be duly ISI Certification marked.

Supply and transportation of M 16 x 80 mm M.S. Hexagonal head bolts and nuts bearing IS -1363 (Part-I) / 1992 of product Grade-C latest amendments for bolts & IS-1363 (Part-3) /1992 of product Grade-C with latest amendments for nuts properties/ Clause for bolts -4.6 & for nuts -4.5. Both bolts & nuts are to be duly ISI Certification marked.

Supply and transportation of M 20 x 100 mm M.S. Hexagonal head bolts and nuts bearing IS -1363 (Part-I) / 1992 of product Grade-C latest amendments for bolts & IS-1363 (Part-3) /1992 of product Grade-C with latest amendments for nuts properties/ Clause for bolts -4.6 & for nuts -4.5. Both bolts & nuts are to be duly ISI Certification marked.

Supply and transportation 150mm NB foot valve leather washer.

Total =

Say Rs.

Twenty Eight Lakh Twenty Two Thousand Six Hundred & Twenty Five Only