02/EUDC(RB)/LESA/2025-26

Amount

Safe carriage loading unloading with proper stacking of following material from ESC Daliganj to JE dump store.

11KV 3X185 SQ MM XLPE CABLE

11 KV O/Door jointing kit 3x185 SQ MM

LT XLPE Cable 1x240/400/630/3.5x400 sqmm

LT ABC (3x95+1x70+1x16) Sqmm

LT PVC Cable 1x400 Sqmm

ST Pole 11 Mtr long

11/0.4 KV 400 KVA T/F

Dropper Chaneel

Top Cahnnel

11 KV polymeric pin insulator with GI Pin

MS earthing rod 2540x20 mm

Gi Wire 6 SWG

Safe carriage loading unloading with proper stacking of following material from JE dump store to work site.

11KV 3X185 SQ MM XLPE CABLE

11 KV O/Door jointing kit 3x185 SQ MM

LT XLPE Cable 1x240/400/630/3.5x400 sqmm

LT ABC (3x95+1x70+1x16) Sqmm

LT PVC Cable 1x400 Sqmm

ST Pole 11 Mtr long

11/0.4 KV 400 KVA T/F

Dropper Chaneel

Top Cahnnel

11 KV polymeric pin insulator with GI Pin

MS earthing rod 2540x20 mm

Gi Wire 6 SWG

S/C Cable laying in Metalic/Damar/normal soil road by manual method as per site condition. (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Laying of LT XLPE Cable 3.5x400 Sqmm

Laying of LT PVC Cable 3.5x400 Sqmm

Fabrication and etection of S/S type double pole for 11 KV line on 11 Mtr long ST pole structure & installation, Commissining of 100 KVA T/F on double pole including jumpring with the system (All the required material for above job shall be provided by contractor except (T/Fs)

Hoisting of 11KV XLPE cable3x185 sq mm

High Pressure testing of 11 KV XLPE cable. Testing equipment will be arranged by the contractor.

Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cemend sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed.Rest wall should be 0.23 mtr thick.brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be fiilled from the ground level up to 15 centimeter below from the top of wall,Cement,sand & brick Ballasts should be filled up to 15 centimeter.Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand,cement and stone ballast in the ratio of 1:2:4.The t/fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor .)

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation,commissioning of 400 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required matrial for above job shall be provided by contractor except T/Fs)

Stringing,Sagging,winding and jumpering of LT line with AB Cable (3x120+1x95+1x16) conductor as per RESSPO Norms. (AB Cable provided by deptt and balance material like holding clamp, eye hook, suspension clamp and dead end clamp arranged by contractor .)

Construction of retaining wall, fabrication & erection of Wire mesh fencing around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

Repairing/New wiremesh fencing of distribution transformer

Construction of massonary type Distribution Pillar box made of MS sheet (All the material will be arranged by the contractor).

Suppy & fixing of henless fuse unit 500 amp 650 volts

Suppy & fixing of henless fuse unit 300 amp 650 volts

Suppy & fixing of Copper strip of size 50x50x6 mm

Suppy & fixing of CU L-Piece for 400 KVA T/f

Suppy & fixing of suitable size of lugs

Suppy & fixing of DO fuse set

Suppy & fixing of 11 KV TPMO

Construction of pole plinth

Grouting of Pole

Painting of New Erection Pole

Connection of earth wire from cable earth strip/steel part to earthing rod by earth wire as per norms

Fixing of earth rod as per norms ( All material provided by contractor except earth rod)

Making heat & srinkables joints of following sizes and types for 11 KV XLPE cable (Jointing kit will be provided by dept)

Indoor/Outdoor end termination kit for 11 KV 3x185 Sqmm XLPE cable

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity. (Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

Earthing of S/S equipment by way of boring and lowing of GI pipe 1.5” dia upto water level and minimum 20 m deep from the ground level

Hoisting, winding and jumpering of of LT cable size 1x400/3.5x400 sqmm between LT distribution box/fuse unit & constructed overhead line with proper lugging and clamping

Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/neutral earthing (Earthing rod & earthing strip arranged by contractor).

Fixing of earth rod (2500x20mm) as per norms, for earthing support of old existing poles of LT lines including 6 SWG GI/Earth wire (All material provided by contractor)

Removal of connection from the system, safe loading-unloading of old & used T/F from site to store center daliganj/Transformer repair workshop aliganj

250 KVA t/F by tractor trolly/Crane

Inatallation of 400 KVA T/F by crane

All taxess as applicable shall be paid time to time extra

M/S R P ENTERPRISES (BID ID -5213146)

P.S. ENTERPRISES (BID ID -5213304)