RATE CONTRACT FOR SUPPLY OF SPARES FOR WARMAN MAKE PUMP

PUMP MODELS / SPARES FOR JADUGUDA & TURAMDIH.

A. WARMAN PUMP, MODEL:- 1.5/1 BAH Clamp Bolt & Nut, Part No:-B012ME62 (MS)

Adjusting Screw, Nut & Washer, Part No:-B001ME62 (MS)

End Cover Gasket/Shim Set, Part No:-B025P50

End Cover Set Screw, Part No:-B027ME62 (MS)

Labyrinth, Part No:-B062-10D81 (SGI)

Piston Ring, Part No:-B108G02 (CI)

Shaft, Part No:-B073ME03 (EN-8BS970)

End Cover, Part No:-B024-10D21 (CI)

Bearing Housing, Part No:-B004MG01 (CI)

Clamp Washer , Part No:-B011E62 (MS)

FPL Insert, Part No:-B1041A05 (ULTRACROME 27% Cr)

Volute Liner, Part No:-B1110A05(ULTRACROME 27% Cr)

Impeller, Part No:-B1127A05 (ULTRACROME 27% Cr)

Frame Plate, Part No:-B1032G01 (CI)

Cover Plate, Part No:-B1013G01 (CI)

Discharge Joint Ring, Part No:-B1132XLPS01 (RUBBER)

Intake Joint Ring, Part No:-B1060S01 (RUBBER)

Volute Liner Seal(Frame Seal), Part No:-B1125S01 (RUBBER)

Cover Plate Bolt & Nut, Part No:-B015ME62 (MS)

Frame Plate Stud & Nut, Part No:-B039E62 (MS)

‘O’ Ring Shaft Sleeve, Part No:-B109S10 (RUBBER)

Gland, Part No:-B044C23, SS-316

Shaft sleeve, Part No :-B075C23, SS -316

Gland Bolt,Nut & Washer, Part No:-A045MC23 ,SS-316

Gland Clamp Bolt & Nut, Part No:-B126MC23, SS-316

Lantern Restrictor, Part No:-B118C23 ,SS-316

Stuffing Box, Part No:-B078G01 (CI)

Seal Ring, Part No:-B122R11 (RUBBER)

Bearing Assembly, Part No:-B005M

‘O’ Ring Impeller sealing, Part No:-B217S10 (RUBBER)

Shaft Spacer, Part No:-B117C21 (SS)

Grease Retainer, Part No:-B046G01 (CI)

Labyrinth Locknut, Part No:-B061-E62 (MS)

Clamp Washer, Part No. B011E63

Base, Part No. B003MG01

Impeller, Part No :-B1052R55, Natural rubber

Cover Plate Liner , Part no. B1017R55, Natural rubber

Frame Plate Liner, Part No. B1017R55, Natural rubber

Expeller, Part No :-B028C23, SS- 316

Expeller Ring, Part No :-B029C23, SS- 316

Lantern Ring, Part No :-B063C23, SS - 316

Neck Ring, Part No :-B067C23, -SS-316

Frame Plate Liner Stud, Part No. B026ME62, MS

B. WARMAN PUMP, MODEL:- 2/1.5 BAH TAG NO. :- 9P-13A/B , 22P-5A/B/C , 9P-9A/B Volute Liner seal, Part No :-B15125S01 (RUBBER)

Cover Plate Bolt & Nut, Part No :-B015ME63 (CS)

Frame plate Stud, Part No :-B039E62 (MS)

Seal Ring, Part No :-B122S44 (RUBBER)

Lantern Ring, Part No :-B063C23, SS-316

Grease Retainer, Part No :-B046D21 (SGI)

Stuffing Box, Part No :-B078G01 (CI)

Grease Cup, Part No :-WP2L82-L (MS)

Grease Cup Adapter, Part No :-B138E62 (MS)

Expeller, Part No :-B028C23, SS- 316

Expeller Ring, Part No :-B029C23, SS-316

Neck Ring, Part No :-B067C23, SS-316

‘O’ Ring, Part No :-B217S10 (RUBBER)

Impeller, Part No :-B15127A05 (Ultrachrome 27%Cr)

Shaft, Part No :-B073ME03 (CS)

Shaft Spacer, Part No :-B117C21 (SS)

Volute Liner, Part No :-B15110A05 (Ultrachrome 27%Cr)

Shaft Sleeve, Part No :-B075C23, SS -316

‘O’ Ring, Part No :-B109S10 (RUBBER)

Bearing Assembly, Part No :-B005M

Bearing Housing, Part No :-B004MG01 (CI)

Gland, Part No :-B044C23 ,SS-316

End Cover, Part No :-B024-10D21 (SGI)

Clamp Bolt, Part No :-B012ME62 (MS)

Adjusting Screw, Part No :-B001ME62 (MS)

End Cover Set Screw, Part No :-B027ME62 (MS)

Labyrinth, Part No :-B062-10D81 (SGI)

Labyrinth Locknut, Part No :-B061E62 (MS)

Piston Ring, Part No :-B108G02 (CI)

Clamp Washer, Part No :-B011E62 (MS)

FPLI, Part No :-B15041A05 (Ultrachrome 27%Cr)

Frame Plate, Part No :-B15032G01 (CI)

Cover Plate, Part No :-B15013G01 (CI)

Disc Joint Ring, Part No :-B15132LS01 (RUBBER)

INT JT Ring, Part No :-D15060S01 (RUBBER)

Gland Clamp Bolt, Part No. B126MC23

Base, Part No. B003MG01

End Cover Gasket / Shim ;Pt No :- B025P50

Grease Nipple

Impeller, Part No :-B15127R55, Natural Rubber

Cover Plate Liner, Pt.No. B15017R55, Natural Rubber

Frame Plate Stud, Part No :-B039ME63, MS

Frame Plate Liner, Part No.: B15036MR55, Natural rubber

Shaft, Part No. B073ME03, CS

Lantern restrictor, Part No. B118C23, SS-316

Gland Bolt, Nut & Washer, Part No. B045MC23, SS316

Frame Plate Liner Stud -1 Thin Self Lock Nut, Part No. B026ME62

C. WARMAN PUMP, MODEL :- 3/2 CAH (METAL, TAG NO. :- 22P- 4A/B Clamp Bolt & Nut, Part No :- C012ME62 (MS)

Adjusting Screw, Nut & Washer, Part No :-C001ME62, (MS)

End Cover Shim, Part No :-C025P50

End Cover Set Screw, Part No :-B027ME62, (MS)

Labyrinth, Part No :-C062-10D81, (SGI)

Labyrinth Lock Nut, Part No :-C061E62, (SGI)

Piston Ring, Part No :-C108G02, (CI)

Shaft, Part No :-C073ME03, (CS)

Shaft Spacer, Part No :-C117C21, (SS)

End Cover, Part No :-C024-10G01, (CI)

Clamp Washer, Part No :-C011E62, (MS)

FPL Insert, Part No :-C2041A05, (ULTRACROME 27% Cr)

Volute Liner, Part No :-C2110A05, (ULTRACROME 27% Cr)

Impeller, Part No :-C2147A05, (ULTRACROME 27% Cr)

Frame Plate, Part No :-C2032HS1G01, (CI)

Cover Plate, Part No :-C2013G01, (CI)

Discharge Joint Ring, Part No :-C2132LS01, (RUBBER)

Intake Joint Ring, Part No :-C2060S01, (RUBBER)

Volute Liner Seal(Frame Seal), Part No :-C2125S01, (RUBBER)

Cover Plate Bolt & Nut, Part No :-C015ME62, (MS)

Frame Plate Stud & Nut, Part No :-C039E62, (MS)

Gland, Part No. C044C23. SS-316

Shaft sleeve, Part No :-C075C23, SS -316

Gland Bolt, Nut & Washer, Part No :-C045MC23, (SS)

Gland Clamp Bolt, Part No :-C126MC23, (SS)

Cover Plate Liner Stud, Part no. C023ME62, MS

Seal Ring, Part No :-C122R11, (RUBBER)

Bearing Assembly, Part No :-C005M

Bearing Seal, Part No :-C089-10S10, (RUBBER)

‘O’ Ring, Part No :-C217S10, (RUBBER)

Expeller, Part No :-C028C23, SS- 316

Expeller Ring, Part No :-C029C23, SS-316

Lantern Ring, Part No :-C063C23,SS-316

Neck Ring, Part No :-C067C23, SS-316

Lantern Restrictor, Part No :-C118C23,SS-316

Grease Cup, Part No :-D138E62, (MS)

Stuffing Box, Part No :-C078G01, (CI)

Impeller, Part No :-C2147R55, Natural rubber

Cover Plate Liner, Part No. C2017MR55, Natural rubber

Frame Plate Stud , Part No :-C039ME63, MS

Shaft Sleeve 'O' Ring, Part No. C109S10, Natural rubber

Frame Plate Liner, Part No. C2036MR55, Natural rubber

Gland Bolt - 1 nut, 1 washer, Part No. C045MC23, SS316

Base, Part No. C003MG01, CI

FPL insert stud /Nylock nut, Part No. C026ME62, MS

D. WARMAN PUMP, MODEL :- 3/2 B-SC METAL LINED, PUMP NO. A1-110-0-110385, TAG NO. :- 6P-11A/B , 4P-4A/B , 5P-7A/B, 7P-29A/B Bearing Assembly (drg. A3-110177), Part No.:-BSC005M

Shaft, Part No.:-BSC073M E03, (En8 BS970)

Shaft Key, Part No.:-B070M E03, (En8 BS970)

Labyrinth locknut, Part No.:-B061E62, (MS)

Labyrinth, Part No.:-B062-10D81, (D81)

Grease Cup, Part No.:-A365E62, (MS)

Grease Retainer, Part No.:-B046G01, (CI FG260)

Bearing Housing, Part No.:-B004MG01, (CIFG260)

Plug , Part No.:-WP2P1-EE62, (MS)

Grease Nipple, Part No.:-UF4L73-ZE62, (MS)

Piston Ring, Part No.:-B108G02, (CI)

End Cover Set Screw, Part No.:-B027E62, (MS)

Shim Set, Part No.:-B025P50

End Cover, Part No.:-B024-10D21, (Ductile Grey Iron)

Bearing Seal, Part No.:-B089-10S10, (S10 Nitrile)

Clamp Washer, Part No.:-B011E62, (MS)

Clamp Bolt, Part No.:-B012ME62, (MS)

Adjusting screw 3 Nuts 2 Washer, Part No.:-B001ME62, (MS)

Frame Plate Stud 2 nuts, Part No.:-B039E62, (MS)

Shaft Sleeve, Part No.:-BSC075C21, (420 CEN 56D 13% Cr)

Seal Ring, Part No.:-32122S10, (S10 Nitrile)

Volute Frame Seal, Part No.:-32125S01, (S01 EPDM Rubber)

Frame Plate, Part No.:-BSC2032G01,(CI FG260)

Cover Plate, Part No.:-BSC2013G01, (CIFG260)

Cover Plate bolt 2 Nuts, Part No.:-BSC015ME62, (MS)

Volute Liner, Part No.:-32110A06, (Ni Hard 4)

Intake Joint, Part No.:-32060S01, (S01 EPDM Rubber)

Discharge Joint, Part No.:-32132S01, (S01 EPDM Rubber)

Frame Plate Liner Insert, Part No.:-32041A06 (Ni Hard 4)

Impeller, Part No.:-32056A06, (Ni Hard 4)

Shaft O Ring, Part No.:-BSC109S10, (S10 Nitrile)

Grease Cup, Part No.:-WP2L82-LE62, (MS)

Grease Cup Adapter, Part No.:-B138E62, (MS)

Lantern Ring, Part No.:-BSC063C23, (Type 316 SS)

Expeller, Part No.:-BSC028G01, (CIFG260)

Gland Clamp Bolt, Part No.:-BSC126MC23, (Type 316 Stainless Steel)

Gland (2 Piece), Part No.:-BSC044C23, (Type 316 Stainless Steel)

Gland bolt 1 Nut 1 Washer, Part No.:-C045MC23, (Type 316 Stainless Steel)

Neck Ring, Part No.:-BSC067C23, (Type 316 SS)

Expeller Ring, Part No.:-BSC029G01, (CIFG -260)

E. WARMAN PUMP, MODEL :- 4/3 CAH ,TAG NO. :- 9P-5A/B End Cover Gasket, Part No :-C025P50

End Cover Set Screw, Part No :-B027ME62, (MS)

Piston Ring, Part No :-C108G02, (CI)

Shaft, Part No. CAM073ME05, CS

Shaft Spacer, Part No :-CAM117C21, (SS)

Clamp Washer, Part No :-C011E62, (MS)

FPL Insert, Part No :-D3041A05, (ULTRACROME 27% Cr)

Impeller, Part No :-D3058A05, (ULTRACROME 27% Cr)

Frame Plate, Part No :-CAM3032G01, (CI)

Cover Plate, Part No :-D3013G01, (CI)

Discharge Joint Ring, Part No :-D3132XLP, (RUBBER)

Intake Joint Ring, Part No :-D3060S01, (RUBBER)

Volute Liner Seal, Part No :-D3125S01, (RUBBER)

Seal Ring, Part No :-D122R11, (RUBBER)

‘O’ Ring Impeller Sealing, Part No :-D064S10, (RUBBER)

Grease Retainer, Part No :-C046G01, (CI)

Expeller, Part No. CAM028C23 , SS-316

Expeller Ring, Part No. CAM029C23, SS-316

Stuffing Box, Part No :-CAM078G01, (CI)

Bearing Assembly, Part No :-CAM005M

Clamp bolt/ one Nut, Part No :-C012ME62, (MS)

Shaft Sleeve O Ring, Part No :-C109S10, (RUBBER)

Shaft Sleeve, Part No. C075, SS-316

FPL Insert Stud, Part No :-M10Z3-85ZVE62 (MS)

Volute Liner, Part No :-D3110A05, (ULTRACROME 27%CR)

Adjusting Screw 3 nuts 2 Washers, Part No :-C001ME62 (MS)

Frame Plate Stud, Part No :-C039ME62, (MS)

Cover Plate bolt - 2 nuts, Part No :-D015ME62, (MS)

Lantern Ring, Part No :-C063C23, SS-316

Neck Ring, Part No :-C067C23,SS-316

Grease Cup adaptor, Part No :-D138E62, (MS)

Impeller, Part No.:- D3147R55, RUBBER

Cover Plate Liner Stud, Part No. D023E62, MS

Cover Plate Liner, Part No. D3017R55, RUBBER

Frame Plate Liner, Part No. D3036R55, RUBBER

Gland Bolt 1 Nut 1 Washer, Part No.:-C045MC23, SS316

Base, Part No. C003MG01, CI

Frame Plate Liner Stud - 1 thin self lock nut , Pt.No :- D026ME62

Gland , Pt.No:- C044C23, SS-316

Lantern restrictor ; Pt.No:- C118C23, SS-316

Frame Plate Stud, Part No.C039ME63 , MS

Gland Clamp bolt, C126MC23, SS-316

Labyrinth Lock Nut, Part No. C061E62

End Cover , Part No.C02410D21

Grease Retainer, Part No. C046G01, CI

Labyrinth, Part No. C06210D81, CI

Shim Set, Part No.C025P50

Piston Ring, Part No. C108G02, CI

End cover Set Screw , Part No. B027ME62

Bearing Seal, Part No. C08910S10

Impeller , D3147A05, (ULTRACROME 27%CR)

F. WARMAN PUMP, MODEL :- 4/3 DAH (METAL), TAG NO. :- 9P-1A/B Clamp Bolt & Nut, Part No :-D012ME62, (MS)

Adjusting Screw, Part No :-D001ME62, (MS)

End Cover Shim Set, Part No :-D025P50

End Cover Set Screw, Part No :-D027ME62, (MS)

Labyrinth, Part No :-D062-10D81, (SGI)

Labyrinth Lock Nut, Part No :-D061E62, (MS)

Piston Ring, Part No :-D108G02, (CI)

Shaft, Part No :-D073ME03, (CS)

Shaft Spacer, Part No :-D117C21, (SS)

End Cover, Part No :-D024-10D21, (SGI)

Clamp Washer, Part No :-D011E62, (MS)

Volute Liner, Part No :-D3110A05, (ULTRACROME 27% Cr)

Impeller, Part No :-D3058A05, (ULTRACROME 27% Cr)

Frame Plate, Part No :-D3032G01, (CI)

Cover Plate, Part No :-D3013G01, (CI)

Discharge Joint Ring, Part No :-D3132LS01, (RUBBER)

Intake Joint Ring, Part No :-D3060S01, (RUBBER)

Volute Liner Seal, Part No :-D3125S01, (RUBBER)

Cover Plate Bolt & Nut, Part No :-D015ME62, (MS)

Frame Plate Stud & Nut, Part No :-D039ME62, (MS)

‘O’ Ring Shaft Sleeve, Part No :-D109S10, (RUBBER)

Gland, Part No :-D044C23, SS-316

Shaft sleeve, Part No :-D075C21, (SS)

Gland Bolt, Nut & Washer, Part No :-D045MC23,SS-316

Gland Clamp Bolt & Nut, Part No :-D126MC23, SS-316

Seal Ring, Part No :-D122R11, (SS)

Bearing Assembly, Part No :-D005M

‘O’ Ring Impeller Sealing, Part No :-D064S10, (RUBBER)

Grease Retainer, Part No :-D046G01, (CI)

Expeller, Part No :-D028D21, (SGI)

Expeller Ring, Part No :-D029G01, (CI)

Lantern Ring, Part No :-D063C23, (SS)

Lantern Restrictor, Part No :-D118C23, SS-316

Neck Ring, Part No :-D067C23, SS-316

Bearing Seal, Part No :-D089-10S10, (RUBBER)

Grease Cup, Part No :-WP4L82, (MS)

Stuffing Box, Part No :-D078G01, (CI)

Grease Cup, Part No :-D138E62, (MS)

G. WARMAN PUMP, MODEL :- 6/4 DAH TAG NO. :- 3P-3A/B/C, 3P-7A/B/C/D Clamp Washer, Part No :-D011E63M (MS)

Clamp Bolt, Part No :-D012ME62, (MS)

Shaft Sleeve O Ring, Part No :-D109S10, (RUBBER)

Shaft Sleeve, Part No :-D075C21, (SS)

Frame Plate Liner Stud, Part No :-DAM026ME62, (MS)

Volute Liner Seal, Part No :-E4124S01, (RUBBER)

Frame Plate Liner, Part No :-E4036R55, (RUBBER)

Frame Plate, Part No :-DAM4032G01, (CI)

Cover Plate Liner, Part No :-E4018R55, (RUBBER)

Throat Bush, Part No :-E4083R55, (RUBBER)

Cover plate, Part No :-E4013G01, (CI)

Cotter, Part No :-E4085E62, (MS)

Intake Joint Ring, Part No :-E4060S01, (RUBBER)

Adjusting Screw 3 Nuts 2 Washers, Part No :-D001XLME62, (MS)

Frame Plate Bolt Nut, Part No :-D034ME62, (MS)

Impeller, Part No :-E4147R55, (RUBBER)

Cover Plate Bolt 2 Nuts, Part No :-E4015ME62, (MS)

Expeller Ring Stud 1 Nut, Part No :-D079E62, (MS)

Leap Seal, Part No :-D090S01, (RUBBER)

Expeller Ring, Part No :-DAM029R55, (RUBBER)

Leap Seal Gland, Part No :-D241S01, (RUBBER)

Expeller, Part No :-DAM028R55, (RUBBER)

Impeller O ring , Part No :-F064S10, (RUBBER)

Bearing Assembly, Part No :-DAM005M

Base, Part No. D003MG01

End Cover Shim Set, Part No :-D025P50

End Cover Set Screw, Part No :-D027ME62, (MS)

Labyrinth, Part No :-D062-10D81, (SGI)

Labyrinth Locknut, Part No :-D061E62, (MS)

Piston Ring, Part No :-D108G02, (CI)

Shaft Key, Part No :-D070ME03, (CS)

Shaft, Part No :-DAM073ME03, (CS)

End Cover, Part No :-D024-10D21, (SGI)

Bearing Housing, Part No :-D004MG01, (CI)

FPL Insert, Part No :-E4041MA05, (ULTRACROME 27% Cr)

Volute Liner, Part No :-E4110A05, (ULTRACROME 27% Cr)

Impeller, Part No :-E4058A05, (ULTRACROME 27% Cr)

Discharge Joint Ring, Part No :-E4132LS01, (RUBBER)

Frame Plate Bolt, Part No :-D034ME62, (MS)

Shaft Spacer, Part No :-DAM117C21, (SS)

Gland Bolt, Nut & Washer, Part No :-D045MC23, SS-316

Gland Clamp Bolt & Nut, Part No :-D126MC23, SS-316

Seal Ring, Part No :-E122R11, (RUBBER)

Bearing Seal, Part No :-D089-10S10, (RUBBER)

Grease Retainer, Part No :-D046G01, (CI)

Lantern Ring, Part No :-D063C23, SS-316

Lantern Restrictor, Part No :-D118C23, SS-316

Stuffing Box, Part No :-DAM078G01, (CI)

Throat Bush, Part No :-E4083A05, (ULTRACROME 27% Cr)

Grease Nipple, Part No :-UF4L73-ZE62, (MS)

Grease Cup, Part No :-A365, (MS)

H. WARMAN PUMP, MODEL :- 65VD GPS (METAL VERTICAL PUMP) TAG NO. :- 4P-11A/B/C/D, 5P-14A/B, 6P-8A/B, 7P-47A/B, 7P-60A/B, 7P-66A/B,70P-80A/B/C, 70P-2A/B, 3P-8A/B Shaft, Part No:-VD65073-10 E03, (CS)

Bearing Seal, Part No:-VD089DS10, (RUBBER)

End cover Bolt, Part No:-M10H1-40ZHE62, (MS)

Bearing Holder Bolt (Drive), Part No:-M16H1-55ZHE62, (MS)

Bearing Housing, Part No:-VD004ME02, (CI)

Bearing Nut, Part No:-VD061E63, (MS)

End Cover, Part No:-VD024D21, (CI)

Grease Nipple, Part No:-WP4L70-ZE62, (MS)

Bearing (Drive), Part No:-VD009D,

Bearing Holder (Drive), Part No:-VD158DD21, (CI)

Bearing, Part No:-VD009

Bearing Holder, Part No:-VD158-10D21, (CI)

Bearing Seal, Part No:-P089S10, (RUBBER)

Bearing Holder Bolt, Part No:-M16H1-50ZHE62, (MS)

Bearing Seal, Part No:-VCH089S10, (RUBBER)

Shaft Sleeve Ejector, Part No:-VD077C21, (SS)

O Ring, Part No:-35T203N266S10, (RUBBER)

Mounting Plate, Part No:-VD019E02, (CI)

Bearing Housing Bolt, Part No:-M20H1-70Z1E62, (MS)

Discharge Pipe Support Screw, Part No:-M20H2-40ZC, (MS)

U Bolt Nut, Part No:-M12H5ZWE02, (CI)

Column Bolt, Part No:-M20H1-60Z1, (MS)

O Ring, Part No:-QV062S10, (RUBBER)

Spacer, Part No:-VD290C22, (SS)

Strainer, Part No:-SPR65116LD21, (CI)

Discharge Clamp, Part No:-GPS65153P10,

Joint ring, Part No:-GPS65372S42, (NEOPRINE)

Discharge Clamp Bolt, Part No:-M10H160SC, (MS)

Impeller, Part No:-SP65206AA05, (ULTRACROME 27%Cr)

Flinger, Part No:-VD184S14, (RUBBER)

Column, Part No:-VD102E02, (CI)

Spigot Ring, Part No:-GPS65211S42, (NEOPRINE)

Bolt , Part No:-M16H1-100ZCE62, (MS)

Casing, Part No:-GPS65092A05, (ULTRACROME 27% Cr)

Back Liner, Part No:-GPS65041A05 (ULTRACROME 27% Cr)

Back Liner Seal, Part No:-GPS65125S42

I. SPARES FOR WARMAN PUMP, MODEL:- 6/4 EAH, TAG No.: 4P-3A, 8P-2A/B/C,8P-10D, 9P-1E/F/G/H Frame Plate Liner, Part No. E4036R55, Natural rubber

Cover Plate Liner , Part No. E4018R55, Natural rubber

Throat Bush , Part No. E4083R55, Natural rubber

SS-316 Gland, Part No. E044C23, MOC: SS-316

Labyrinth Lock Nut, Part No. E061E62, Steel

Bolt for Gland Clamp. Part no. E126MC23, SS-316

Piston Ring, Part No. E108G02

Labyrinth, Part No. E06210D81, CI

Bearing Cover, Part No.E02410D21, CI

Impeller, Part No. E4147A05, 27% Chrome Alloy

Grease Retainer, Part No. E046G01, CI

Shaft Spacer, Part No.E117C21, SS

Lantern Restrictor, Part No.E108G02, MOC: SS-316

Frame Plate, Part No.E4032D21, DI

Cover Plate, Part No.E4013D21, DI

Shaft, Part No.E073ME03, MOC: CS

Stuffing Box, Part No. E078G01, MOC: CI

Key of Shaft, Part No. E070ME05, CS

O Ring Shaft Sleeve, Part No.D109S10, Nitrile

O Ring for Impeller Sealing, Part No.F064S10

Clamp Washer, Part No. E011E63

Clamp Bolt - 1 Nut, Part No. E012ME62

Shaft Sleeve, Part No. E075C21, SS

Frame Plate Liner Stud - 1 Thin Self Lock Nut, Part No. E4026ME62

Intake Joint Ring, Part No. E4060501

Adjusting Screw 3 Nuts, 2 washers, Part No. E001ME62

Base, Part No. E003MG01

Frame Plate Stud 2 nuts, Part No.:-E039ME63

Cover plate bolt 2 nuts, Part No. E4015ME63

Gland bolt 1 nut, 1 washer, Part No. E045MC23

Expeller, Part No. E028D21

Expeller ring, Part No. E029G01

End Cover Gasket / Shim ; PT. NO :- E025P50

Grease Nipple

Bearing Assembly , Part No :- E005M

Volute Liner Seal, Part No . E4124S01

Impeller , Part No . E4147R55, Natural Rubber

Cotter , Part No. E4085E02

J. SPARES FOR WARMAN PUMP, MODEL:- 8/6 EAH Frame Plate Liner, Part No. F6036MR55, MOC: Natural Rubber

Cover Plate Liner, Part No. F6018R55, MOC: Natural Rubber

Throatbush, Part No. F6083R55, MOC:Natural Rubber

Frame Plate, Part No.: EAM6032G01, MOC: CI

Cover Plate, Part No.: F6013G01, MOC: CI

Impeller, Part No.: F6147A05, MOC: 27%Chrome Alloy

Shaft Sleeve, Part No.: E075C21, MOC : SS - 420C

Gland, Part No. E044C23, MOC: SS- 316

Lantern Restrictor, Part No. : E118C23, MOC : SS - 316

Bearing Assembly, Part No. : EAM005M,

Shaft with keys, Part No.: EAM073ME03, MOC: EN8

Stuffing Box, Part No.: EAM078G01, MOC : CI

End Cover, Part No.: E02410G01, MOC: CI

Piston Ring, Part No.: E108G02, MOC: CI

Grease Retainer, Part No.: E046G01, MOC: CI

Shaft Spacer, Part No.: EAM117C21, MOC: SS 420C

Gland Clamp Bolt, Part No.: E126MC23, MOC: SS - 316

Cover Plate Bolt - 2 Nuts ; Pt.No:- F6015ME63

Frame Plate liner Stud, Part No. E10026ME62

Frame Plate bolt, Part No. E034ME63, MS

Clamp Washer, Pt.No :- E011E63 1800.61

Clamp Bolt - 1 Nut , Pt.No:- E012ME62

Shaft Sleeve O Ring, Pt.No :- E109S10

Impeller , Pt. No:- F6147R55, Natural Rubber

Cotter , Pt.No:- F6085E02

Adjusting Screw - 3 nuts - 2 washers ; Pt.No:- E001ME62

Gland Bolt - 1 Nut - 1 Washer ; Pt.No:- E045MC23

Impeller O Ring, Pt.No:- F064S10

Seal Ring , Pt.No:- F122R11 ; Natural Rubber

Frame Plate Liner Insert , Pt.No:- F6041MA05

Discharge Joint ; Pt.No:- F6132LS01

ThroatBush ; Pt.No:- F6083WRT1A05

Throat Bush Stud . Pt.No:- M12Z3-50ZL

Intake Joint ; Pt.No;- F6060S01

Base ; Pt.No;- E003MG01

Back Liner Seal ; Pt.No:- F8124S01

Volute Liner , Pt.No:- F6110A05

Cover Plate Bolt - 2 Nuts ; Pt.No:- F6015ME63

Impeller ; Pt.No :- F6145WRT1A05

K. SPARES FOR WARMAN PUMP, MODEL:- 65QVSPR Labyrinth Lock nut, Pt.No;- QV061E62

Labyrinth ; Pt.No;- QV062D81

Grease Nipple ; Pt.No:- WP4L70-Z

Piston Ring ; Pt.No:- D108G02

Shaft Sleeve Ejector ; Pt.No:- QV077C21

Bearing Seal ; Pt.No:- QV089S10

Flinger ; Pt. No:- QVR184S44

Spacer Jet ; Pt.No:- QV290E02

Discharge Pipe ; Pt.No:- QVR65154

Strainer ; Pt. No :- SPR65116R10

Column ; Pt.No:- QVR65102

Impeller O Ring ; Pt.No;- QV064S10

Impeller ; Pt.No:- SPR65206AR55

Back Liner ; Pt.No;- SPR65041

Casing ; Pt.No:- SPR65092

Volute Frame Seal ; Pt.No:- D3125S01

Joint Ring intake ; Pt.No;- SP65060S00

Discharge Pipe gasket ; Pt.No;- SP65204R00

Bearing Assembly ; Pt.No:- QVR65005G

L. SPARES FOR WARMAN PUMP, MODEL:- 100 RV SP BEARING HOUSING, PART NO. RV0041D21

BEARING SEAL, PART NO. RV089S10

BEARING SLEEVE, PART NO.RV008E02

END COVER, PART NO.RV024D21

END COVER LOWER, PART NO.RV024L1D21

END COVER SHIM SET, PART NO.RV025S14

END COVER O RING, PART NO.RV217S10

LABYRINTH, PART NO.RV062D81

LABYRINTH LOCK NUT, PART NO.RV061E62

LABYRINTH LOCK WASHER, PART NO.SKFMB17

PISTON RING, PART NO.R108G02

SHAFT, PART NO.RV10073LE05

SHAFT KEY , PART NO.RV070E05

SHAFT SLEEVE EJECTOR, PART NO.RV077C21

IMPELLER, PART NO.SP10206AA05

IMPELLER O RING, PART NO.RV064S10

SPACER SET, PART NO.RV290E02

STRAINER, PART NO.SP101164C23

BACK LINER, PART NO.SP10041A05

BACK LINER SEAL, PART NO.E4124S01

CASING, PART NO.SP10092A05

COLUMN, PART NO.RV10102LE02

STRAINER LOWER, PART NO.SP10116LD21

Please Enable Macros to View BoQ information