Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.1 L+₹92,824 (2.64%)Rejected-Finance NOT AVAILABLE | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹37.8 L+₹2.7 L (7.56%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹39.3 L+₹4.1 L (11.6%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Not Reasonable | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to firm is not renewed in cyclic period 2020. |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
ADDITION/ALTERATION TO BUILDING NO P-29 UNDER GE (W) COLABA, MUMBAI
2023_MES_598166_1
8759/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹82,000
Yes
21 Aug 2023
25 May 2023
23 Jun 2023
25 May 2023
21 Jun 2023
7 Jun 2023
Amount
Dismantling mangalore patteren or similar tiles in roofing including portions bedded in cement mortar all as specified and directed.
Dismantling roof battens of any description in any position all as specified and directed.
Dismantling boarding, of any description, fixed in any position with nail all as specified & directed
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) all as specified & directed .
Dismantling of wall and ceiling boards (fibre pulp insulation, etc.) any thickness including cover fillets all as specifed and directed.
Taking down Chowkhats and shutters of windows/ventilators with wire mesh / glass and MS grills of any size including all fittings and fixtures all as specified and directed.
Dismantling timber in scantling 40 Sqcm and over in section in any position unframed work all as specified and directed.
Demolition of brick masonary built in cement mortar all as specified and directed.
Demolition of cement concrete (unreinforced below or above ground level) n.exc 15cm thick and removing rubbish to a distance n.exc 50m at low lying area all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Demolition of cement concrete reinforced ( reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, facia, fins railing, parapet etc and similar suspended work all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land including necessary scafolding of any height of bldg all as specifed and direcetd.
Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and directed
M&L PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in embedding of post all as specified and directed
M&L RCC works as in columns, foundations, beams, slabs, parapet, staircase in M-20 grade Mix (1:1.5:3) (using 20 mm graded crushed stone aggregate) including demolition all as specified and directed.
Use and waste special water tight centering and shuttering including bolting, strutting, propping etc. so as to with stand a pressure of 0.1 Mpa including removal of form work of all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies all as specified and directed.
M&L mild steel bars deformed or twisted 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
All as per item No 17 above but 6 mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified & directed
M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed.
M&l for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolation all as specified & directed
M&L broken stone or boulders hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using power roller all a specified and directed.
M&L PCC 1:4:8 type D2 (using 100mm graded crushed stone aggregate) and similar work all as specified and directed.
M&L earth filling in floors, spreading and leveling in layers nexc 15 cm thick, well ramming including watering as required all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in floors, plinth protection (finished surfaces even and fair) laid in panels including joints filled with sealing compound grade 'A' all as specified and directed.
M&L coloured polished matt finish 8-10 mm thick area of each tile exc 0.18 sqm but not exc 0.36 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over and including screed bed or bedding layer of mortar 15mm thick in CM (1:6) all as specified and directed. Make :- Johnson /Kajaria)
M&L coloured, tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including 10 mm thick rendering in CM 1:4 all as specified and directed. Note:- Rate of Designer border in vertical surface will be deemed in quoted rates. Make : M/s H R Johnson/M/s Kajaria/M/s Somany Tiles Ltd
M&L Granite (of any type and colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.
M&L machine cut cudappah stone slab 20-25mm thick including 20 mm cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
M&L hard drawn steel welded wire fabric mesh 100 mmx 100 mm x 3mm dia cut to lengths bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dia supplied anchored over 3 to 4 inch long iron nails at a distance of 0.6 m in both direction and fixed in walls / reinforcemnt weight not less than 1.37 Kg/Sqm but not exc 4kg per sqm for fixing and for bracing, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it. Note:- (a) The rates include for straightening, raking or circular cutting and waste. (b) Rates also include for straightening where reinforcement is supplied in rolls/coil.
S&F SS 304 Grade metal letters of height 200mm with PU paint to match the logo colours, mirror polish finish, anti rust and including necesssary arrangements to fixing in walls, using scaffolding at any height of the bldg all as specified and directed.
S&F 4mm thick panel of any type, pattern and shape aluminium composite panel (ACP), aluminium thickness of 0.5mm, front side finish of aluminum roll coated with plain / coloured / wooden texture PE / PVDF, core material of Non-toxic polyethylene, macromolecular lamination film, rear side of aluminum coated with primer and including frame work using of fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the horizontal & vertical Joints in the aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : (a). The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. (b). For payment purpose panels areas will be measured on one side only.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, etc. of required size, on the top of floor or the side of waist slab with suitable arrangemet for stainless steel grade 304 decorative designer railings, staircase, covers, sitting place, shed etc. (design and pattern as approved) all as specified and directed. Make : Jindal stainless Ltd., SAIL, TISCO, POSCO etc.
M&L for 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished surfaces even & smooth without using extra cement all as specified and directed.
M&L for 20-25 mm average thick Ready Mix laster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick work all as specified and directed.
Supply only integral water proofing compound all as specified and directed.
M&L for two coats of smooth interior acrylic emulsion with texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs (undiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions all as specified and directed. Make -Apcolite Premium Emulsion
M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm applied over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified & directed. Note (a) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Apex, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Contractor may use mechanized sanding tools for complete removal and Surface preparation by Air spray machine Trucare -graco-ultramax-490-pc -pro approved by Engr -In-Charge.
M&L for preparation of newly plastered wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 2mm thick ( in two coat 1 mm each ) average on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of acryilic emulsuion paint over a coat of alkali resistant priming paint all as specified and directed. Make : Apcolite Premium Emulsion Note (a) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Apex, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Contractor may use mechanized sanding tools for complete removal and Surface preparation by Air spray machine Trucare -graco-ultramax-490-pc -pro approved by Engr -In-Charge.
M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making, provision for fixing of fittings where ever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hionges, handle. However it will be not be weighed and not paid separately. Joints between wall and window shall be filled with silicon sealent. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.
S&F aluminium deco grill Cat No DG-916, 7.5 mm thick, cut to required size/shape and fixed in position with aluminium beading all as specified and directed.
S&F sheet glass, ordinary quality, 5.5 mm thick, plain or frosted on one side and glazed with oil putty or fixed with rubber beading in square exc 0.5 Sqm in each pane all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm of approved design and fixed with aluminium windows all as specified and directed.
S&F in repairs 12mm thick, toughened glass for door shutters, partitions in bathroom or other places, shelves, table top or in similar work with and including fitting and fixtures such as glass handles, SS studs, fittings for door pivots all as specified and directed .
S&F Sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructionsall as specified & directed
S&F in repairs SS 202 Stain finish Handle D type, 25mm dia 600mm long for glass shutter all as specified and directed
S&F in repairs bottom/top patch fitting for pivot all as specified and directed
S&F in repairs bottom lock patch fitting all as specified and directed
M&L 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & including hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long all as specified and directed.
Extra over above items No. 48 for any sunk or raised moulding all as specified and directed.
S&F GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.
S&F 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.
M&L 8/10 mm thick PVC ceiling or wall panelling (any colour) with aluminium frame work for receiving ceiling board / wall panelling including all necessary accessories for fixing at various levels all as specified and directed.
S&F factory made single extruded WPC (wood polymer composite) solid door frames/chowkhat comprising of 120mm X 50 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold unserviceable fast/lugs/SS dash fasteners of required dia and length all as specified and as directed.
S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces covered with decorative face Laminate both side with and including 5mm thick teakwood lipping all around / frame to match on both side with supply & fixing stainless steel 7.5 inch mortice 7 lever door lock, double action with handle all as specified & directed.
S&F 35mm thick flush shutter, solid core construction with block board core and one side lamnaite and one side with different colours matt finish of wooden colour solid panel decorative type on both side all as specified and directed.
S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed.
M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. .
S&F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.
S&F 200mm size brass handle cast type polished bright all as specified and directed.
S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 300mm all as specified and directed.
S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm all as specified & directed .
S&F in repairs 25 mm dia stainless steel decorative type curtain rods to be fitted with stainless steel bracket and all other connected works all as specified and directed.
S&F stainless steel side brackets for curtain rod of approved quality all as specifed and directed.
M&L for injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water ) and removing the plants/vegetation with penetrated roots complete including all necessary scafolding arrangments upto any height of the bldg all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.
M&L for providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 literes per linear metre including drilling and plugging holes etc in apron all as specified and directed.
M&L for providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor all as specified and directed.
S&F mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including welding, nuts and bolts all as specified and directed.
S&F steel work in tubular trusses including special shaped washer using ERW or induction butt welded tubes, nuts and bolts, welding, etc conforming to IS.1161- 1979 grade St.-240 all as specified and directed.
S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality A all as specified & directed .
M&L framed work such as grills, gratings, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe Fe 290 Gde E-165 all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directe. Make -JSW
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves etc fixed with self tapping screws all as specified and directed.
M&L two coats of synthetic enamel paint over a coat of red oxide on steel surface including preparation of steel surface width or girth exc 10cm all as specified and directed.
S&F mild steel work using flat iron as in stays for rainwater, ventilating pipes, rain water half round brackets including bolts if required and similar small articles conforming to Fe410-0 or Fe 310-0 all as specified and directed.
S&F rain water gutter in half round shape 110mm dia PVC ( SWR) grade pipes single socketed in any length with integral outlet of 110 mm dia all as specified and directed.
S&F PVC (SWR) pipes 110mm bore, double socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, any location any floor including necessary scaffolding all as specified and directed.
S&f 110mm dia PVC (SWR) bends /elbow any radius including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding all as specified and as directed.
S&F aluminium (Die cast) body, door closer, hydraulically regulated, designation No. 3, unversal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg all as specifed & directed.
S&F stainless steel sink 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm bowl size 460mm x 460 x 230mm all as specified and directed. Make Nirali, Prayag/Eagle)
S&F 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- Cera Cat Part No F 2003253 or Equivalent of Jaquar/ Parko.
S&F in repairs GI tubing 15 mm bore medium grade with all fittings as IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors all as specified and directed Make: Jindal / Tata / Swastik
S&F PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement all as specified and directed.
M&L for providing and erecting vertical scaffold unserviceable net (debris net), made out of high density polyethylene for dust and debris control and keeping the same during period of work and including dismantling and taking away after completion of work all as specified and directed.
Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (including fittings such as switches, sockets, ceiling rose, pendent holders, light fittings, etc.) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed.
M&L for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volts grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, casing & capping with accessories incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139 (pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators, etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light fan point controlled by one switch all as specified and directed. Note :- Switch, socket and fan regulators to be measured and paid for separately. Make- Havells/Polycab/KEI
All as per per item No. 87 here in before but for socket outlet point 5 Amp on same board.
All as per item No. 87 here in before but for socket outlet point 5 Amp on Independent board.
All as per item No 87 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) all as specified and directed.
S&F modular switch 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make:- Legrand/ indoasian/Vinay
S&F modular switch 1 way 16 A module, 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make:- Legrand/ indoasian/Vinay
S&F modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, with cover plate all as specified and directed. Make:- Legrand/ indoasian/Vinay
S&F modular sockets 6A/16A, 2/3 pin combined, 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F modular sockets 16A/20 Amps 2/3 pin combined, 2 module 230/250 Volts, 50 Hz , air conddtioner AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F modular Fan step/ electronic regulator, 120W - 2 module A module 230/250 volt , AC supply, ISI Marked, with cover plate all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F in repairs LED batten fitting 20 watt, 3000K/ 4500K, long life up to 25000 hrs with one year warranty, 3.5 KV surge protection, White / Warm White type, 4 feet long fixed on pvc square box for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make:Havells Model No :20W Bajaj IVORA 20W CDL of Bajaj / havells / Wipro.
S&F in repairs 20 watt smart extruded aluminium LED batten high efficiency inbuilt sensorin, 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make: Bajaj No- BCLAB 20W LED PS /Havells / SHAKTI/ Wipro.
S&F in repairs LED 36 Watt 3000 K, Slim raccess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - BAJAJ/Havells / Wipro/ Jaguar
S&F in repairs LED 18 Watt 3000 K/6500K, Slim raccess mounted LED panel with premium diffuser to ensure glare free & even light distribution in LIFT Corridor area, with integrated electronic driver of same make, connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Havells (Cat part No - BPSLR 18 W WW PRO SQ of BAJAJ/Havells / Wipro/ Jaguar
S&F exhaust fan 230 volts, 250mm, plastic body including making all electric connection all as specified and as directed including cutting hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall all as specified and directed. Make- Bajaj/Havells/CG
S&F exhaust fan made of sturdy Engineering plastic with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m with wooden frame prefered all as specified and as directed. Make:- Bajaj or equivalent make of Havells, Crompton Greaves.
S&F exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers & with wooden frame preferred all as specified and as directed. Make: Bajaj or equivalent make of Havells, Crompton Greaves.
S&F ceiling fan with blades, down rods, electronic regulator and accessories, 230V, 1400mm sweep, min air delivery 210 CFM and service value 6.00 BEE. Five star rated and brushless direct current motor (BLDC) making all electric connection. Huck and suitable size rod for hanging ceiling fan complete all as specified and as directed. Make: Bajaj, havells, CG.
S&F ceiling fan with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC making all electric connection, huck and suitable size rod required at site for hanging ceiling fan all as specified and as directed. Make Bajaj/Havell's/CG.
Taking down and refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end, dismantling romoving and hanging fan and blades and removing fan and blades to store, huck and suitable size rod at required site for hanging ceiling fan all as specified and as directed
S&F in repairs LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as specified and directed. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL45WLED757 SASYBOPC. Note : The rate quoted must be inclusive of 3 core 1.5sqmm cable for connecting the light to supply.
S&F MCB Distribution board, 240 volts, single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down all as specified and directed. Make: Havells /Schnieder/L&T
S&F MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed including taking down old one. Make: Havells /Schnieder/L&T
S&F in repairs MCB, single pole, 240 volts, 6 to 32 Amps capacity fixed in DB's including taking down old one all as specified and directed. Make: Havells /Schnieder/L&T
S&F in repairs MCCB DB 4 way vertical sheet metal enclosure, TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size including incomer MCCB 100 amps and common neutral link all enclosed in standard sheet flush mounting all as specified and directed. Note : (a) MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . (b) Copper thimble shall be used for connection of cable . Make: Havells /Schnieder/L&T
M&L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes, etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring all as specified and directed. Note: (a) Two runs of 06 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (b) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (c) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.
Excavation in trenches not exceeding 1.5mtr. In depth and not exc 1.5mtr in width and getting out in soft/ loose soil for laying of cable all as specified and directed.
Returning, fillling in trenches, spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed.
Removing excavated material/ surplus soil and depositing where directed at a distence not exc 50 mtr at a level not exc 1.5 mtr from strting point all as specified and directed.
Supply lay/spread in trenches, river sand, clean, including spreading, levelling, punning for laying /cushioning of cables all as specified and as directed.
Supply and lay in trenches fly ash bricks, old size sub class “B” for cable protection all as specified and directed.
Supply, lay in trenches, floors, fix on wall/pole, passing through pipes, etc. LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs of size 16 Sq.mm 4 core, confirming to IS specifications all as specified and directed.
S&F in repairs MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts all as specified and directed all as specified and directed. Make: Havells /Schnieder/L&T
M&L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing on completion all as shown in Electrical Plate No 3 of SSR part -I all as specified and directed.
SHREE JAGDISH FURNITURE CO.
Unitech Enterprises
Frends Enterprises
Bidder Name
Unitech Enterprises
Frends Enterprises
Nilesh Construction
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .