REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION, FITTING AND FIXTURES, DISTRIBUTION BOARDS, ELECTRIC METERS AND SUBMAIN, WINTER APPLIANCES, GEYSERS, EXHAUST FAN STABILIZER AT BAKLOH AND DUNERA CANTT

Amount

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete including fixtures such as switch, socket, ceiling rose, pendent holder light fitting any type and making good disturbed surface of wall/ floor etc. complete

M & L for Point wiring for one light point/ fan point/ bell point etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in PVC Casing & Caping of approved size and quality ISI marked, including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring'".fixed on walls/ceiling including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engineer-in-charge.

Point wiring for one 2 way light point etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including PVC casing caping of appropriate size and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engineer-in-charge.

All as per Sl item No 2 here in before but for one 3 pin 5 amps socket outlet independent board.

All as per Sl item No 2 here in before but for one 3 pin 5 amps socket outlet on the same board with other switch.

Point wiring for one 3 pin 15 amps socket outlet independent with copper conductor cable FRLS type multistrand of size 2.5 Sqmm (red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour),in and including PVC casing caping of appropriate size and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engineer-in-charge.

Point wiring for one light point/ fan point/ bell point etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including PVC surface conduit of appropriate size and with sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engineer-in-charge.

All as per Sl item No 7 here in before but for one 3 pin 5 amps socket outlet independent board .

All as per Sl item No 7 here in before but for one 3 pin 5 amps socket outlet on the same board with other switch.

Point wiring for one 3 pin 15 amps socket outlet independent with copper conductor cable FRLS multistrand of size 2.5 Sqmm (red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour),in and including PVC surface conduit of ppropriate size and with sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engineer-in-charge.

Supply & Fixing Switch piano, flush button, single pole one way 5 amps.

Supply & Fixing Switch piano, flush button, single pole two way 5 amps.

Supply and fixing socket outlet 2 in 1, 3 pin , 5 amp flush type.

Supply & Fixing Switch piano, flush button, single pole one way 15 amps.

Supply and fixing socket outlet 2 in 1, 3 pin ,15 amp flush type.

Supply and fixing in repair plug top 15 Amp , 3 pin for gysers

Fixing only in repair (including taking down old fitting) Energy efficient decorative ultra slim linear LED fittings prewired 1x18 watts LED 6000 K complete with all accessories & fixture with extruded polycarbonate and two nos. rectanglar blocks, environmental friendly energy efficient with three core copper cable 23/0.0076 from ceiling rose to tube light fitting of any make complete all as specified and directed by Engineer-in-charge..(Note: Tube light will be issued by E/M store under Sch-B free for fixing)

S&F (including taking down old fitting) wall mounted LED integrated batten fitting T5 , 9 Watt LED , 2 feet, PVC extruded complete with all accessories & fixture. Havells Cat part No.LHEXBTP7UN1W009 LED P/W or equivelent in Bajaj/Philips complete all as specified and directed by Engineer-in-charge.

Supply and fix ceiling rose 65X50 mm two to three terminals complete all as specified and directed by Engineer-in-charge.

Supply and fix lamp holder, PVC /Polycarbonate type with back plate of type B-22 standard-BS 67 / BS EN 61184 / BS EN 60598-2-1 where appropriate suitable for batten/angle fitting complete all as specified and directed by Engineer-in-charge.

S&F Bulk Head luminaries LED 10Watt Cat no. Havells LHEOAOP7UZ6W010 or equivalent in philips/C&S/Crompton. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with size 23X.0076 of 230V complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door Triple pole and neutral with 200 amps rated bus bar of 4- way, 415 volts, Havells Cat no. DHDNSHODAW04 or equivalent in C&S/Crompton complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts, Havells Cat no.DHDNSHODAW08 or equivalent in C&S/Crompton complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB Triple pole and nuetral 63Amps, 240 volts , C-series Havells Cat no.DHMGCTNF063 or equivalent in legrand/C&S/Crompton , complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB single pole and nuetral 63 Amps, 240 volts , C-series Havells cat no. DHMGCSNF063 or equivalent in legrand/C&S/Crompton complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB single pole and nuetral 6 to32 Amps, 240 volts , C-series havells Cat no. DHMGCSNF006-032 or equivalent in legrand/C&S/Crompton complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB single pole 6 to 32 Amps, 240 volts , C-series havells cat no.DHMGCSPF006-032 or equivalent in legrand/C&S/Crompton complete all as specified and directed by Engineer-in-charge.

Supply and fix in Bell ding dong AC 230 Volt SP

Supply and fix Bell push, flush type 5 Amp

S & F in repair (including taking down old fitting) Energy efficient LED ceiling light 24W of size 2X2 feet complete with all accessories & fixtures Make : Havells Cat Part No. LHEWBPP6PW1W024 or equivalent in Bajaj/ Crompton/ Phlilips complete all as specified and directed by Engineer-in-charge.

S&F in replacement Decorative Post top Lantern for 360° indirect light with IP 65 protection, Resistant to impact and corrosion, Glare-free and better uniformity of capacity 40 Watt . Cat part No LPTO-40-CDL of Crompton or bajaj cat no CELESTA - BGCL 40W LED or surya cat no SLE PT 40W as approved by Engineer-in-Charge including making electrical connection and taking down existing old conventional lanterns complete all as specified and directed by Engineer-in-charge.

Disconnecting and taking down of Geysers (water heater) of capacity 25/ 50 Ltrs horizontal/vertical of any make/model from existing position and dismentling of parts i.e.bottom plate, Top cover, water assembly thermostate, heating elements, inner tank ,glass wool,Pressure relese, inlet and outlet valves etc.complete and reassembling and refixing in same position after descaling desludging and cleaning with suitable chemicals and materials and washing with fresh water and repair and replacment of defective/unserviceable components complete all as specified and directed by Engineer-in-charge. Note: The rate quoted shall include the minors repairs and replacment of minor parts i.e. screw nuts, bolts washers and patch work etc .However the major components incorporated herein after shall be paid under respective items.

S&F in replacement of thermowool for air tightening as per qty required in Geysers of 50 Ltrs capacity complete all as specified and directed by Engineer-in-charge.

All as per item No. 33 here-in-before but 25 Ltrs capacity.

S&F in replacement of water syphon assembly with rubber gaskit tin coated suitable for 50 Ltrs Geysers all as per exisiting shape and size complete all as specified and directed by Engineer-in-charge.

All as per item No. 35 here-in-before but for 25 Ltrs capacity

S&F in replacement of inner stainless steel container thick dully shaped and welded for 50 Ltrs Geysers complete all as specified and directed by Engineer-in-charge.

All as per item No. 37 here-in-before but 25 Ltrs Geysers.

M&L for outer cover of MS sheet not less than 1.2mm thick shaped and welded dully sprey painted all as per existing geyser 50 Ltr capacity .

All as per item No. 39 herein before but 25 Ltrs Geysers.

S&F in replacement of indicators red/green colour as per existing size and type complete all as specified and directed by Engineer-in-charge.

S&F in replacement of Heating Element 1.5 KW 240V 50Hz ISI mark complete all as specified and directed by Engineer-in-charge..Make;Venus/Pearl/CG/Bajaj

S&F in replacement of PVC connection with brass connector duly threaded internally on both ends of size 18”(45Cm) long complete all as specified and as directed.

S&F in replacement of thermostat 0 to 100 C temperature of water heater for 25 Ltr Capacity complete all as specified and directed by Engineer-in-charge.

All as per Item Srl No 44 here-in-before but for 50 Ltr. Capacity

M&L for pressure release valve for 25 Ltr, geysers with all accessories complete all as specified and directed by Engineer-in-charge.

All as per Item Srl No 46 here-in-before but for 50 Ltr. Capacity.

Painting to Geyser with two coat of synthetic enamel white paint with spray gun paint complete all as specified and directed by Engineer-in-charge.

M&L for re-winding with super enamelled copper winding wire of existing gauge of main transformer of 180 volts to 240 volts AC single phase for voltage stabilizer of the following capacity complete all as specified and directed by Engineer-in-charge.:- (a) 10 KVA

All as per Item Srl No 49 here-in-before but for 1/0.5 KVA

Supply & Fixing in repair printed circuit board and cut off circuit 12 volts 5 Amps ,voltmeter,LED indicator type for 0.5/1 KVA stabilizer complete all as specified and directed by Engineer-in-charge.

Overhauling of exhaust fan of any make , model and size 300/450/150 mm complete after disconnecting it and cleaning all parts of fan internally and externally and applying greasing, oiling of bushes and bearings including replacement of all worn out parts such as bush, bearing, burnt out winding , split pin, rubber reel, nuts and bolts,condenser, blade, outer cover, rotor and replacement of 23/0.0076 copper flexible cord twin core of suitable length not exceeding 1 meter length from ceiling rose to exhaust fan including spray painting of exhaust fan with one coats of white synthetic enamel paint including preparation of old painted surfaces, filling of all cavities etc with filler and re-writing fan number with black synthetic enamel paint including re-assembling all repair parts of fan and testing it ( not less than 8 hours continous run ) for smooth functioning and refixing the fan in its original position of any other location where directed complete all as specified and directed by Engineer-in-charge. Note:-Defective parts shall me measured and paid separately

Supply and fix in repair ball bearing of suitable size for following items all as specified and directed. Make :- SKF /NBC (a) Exhaust fan 300 mm to 450 mm sweep

Supply and replace Gun metal bush of suitable size for fan /exhaust fan /air circulator /cabin/wall fan of any make, any model and any sweep complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair MS frame with nut bolts, washers, split pins , rubbers bush .MS rod suitable for exhaust fans complete all as specified and directed by Engineer-in-charge.

Supply and replace condenser 2.5/3.15/ 4 Mfd for fan of any make, any model , type and any sweep 240 volts complete all as specified and directed by Engineer-in-charge.

Supply and replace set of blade for 150 to 450 mm sweep exhaust fans including frame, nut bolts and washers suitable for any make complete all as specified and directed.

S&F in repair rotor complete with copper winding suitable for 150 to 450 mm exhaust fan complete all as specified and directed by Engineer-in-charge.

S&F in repair complete with copper winding suitable for 150 to 450 mm complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair of the following spare parts for repalcement of the unserviceable items complete all as specified and directed by Engineer-in-charge.:- (a) PTC relay OLP HE 48/115 Make : Whirlpool / Classic/ Godrej

(b) Door handle and lock arrangement suitable for 165 / 175 / 285 / 300 / 315 ltrs capacacity refrigerators

(c) Overload protector/relay for refrigerator 1/6 HP ( Make : Whirlpool / Classic/cubing)

(d) Over load protector/relay for refrigerator 1/8 HP (Make : Whirlpool / Classic/cubing)

(e) Rubber door beeding gasket set suitable for 165 / 180 / 300 / 310 ltrs refrigerators

(f) Thermostat for refrigerator (Make : Ranutrol / Indfoss)

(g) Bulb for refrigerator , 15 Watt 220 volt, pin type Make : Bajaj / Omex/Philips

(h) Gas drier filter for refrigerator make : Apurna / Whirlpool

(j) Ice tray (PVC superior quality)

(k) Relay open type for refrigerator 1/6 HP (Make : Ranutrol / Classic)

S&F in repair freezer door assembly complete with door spring for 165/180 / 300 / 310ltrs refrigerator of approved pattern complete all as specified and directed by Engineer-in-charge. Make : Godrej / Whirlpool/ Kelvinator/LG/Voltas

M&L for Gas Re-charging R-134a up to required quantity to refrigerator of any make, model and capacity of 165 ltrs,180 ltrs, 300 ltrs & 310 ltrs including flusing of gas,oil charging, checking of leakage and rectification of the same etc. including replacement of necessary capillary tubes well welding and testing on full load complete all as specified and directed by Engineer-in-charge.

S&F in repair chilled tray for 165/180 / 300 / 310 ltrs refrigerator complete all as specified and directed by Engineer-in-charge. Make : Whirlpool / Kelvinator / Godrej/LG

S&F in repair ice chamber (Freezer) for 165 / 180 / 300 / 310 ltrs refrigerator surrounded by freezer pipes complete all as specified and directed by Engineer-in-charge. Make : Whirlpool / Kelvinator / Godrej /LG

Supply & Fixing in repair condensor coil for 165/180/ 300 / 310 ltrs refrigerator (Cold gold model) Make : Whirlpool / Godrej /LG/Kelvinator

Taking out carefully blower motor, fan blade / drum of 1.5 / 2 Ton window type AC unit & opening for removal the unserviceable copper winding wire of blower motor and rewinding with super enamelled copper winding wire of existing gauge including replacement of worn out bushes, bearings, nuts, bolts etc with new one of suitable size and shape complete all as specified and directed by Engineer-in-charge.

M&L for gas Recharging F-22/R-410A to required quantity to window type AC 1.5 / 2 Ton capacity of any make any model including flusing of gas,oil charging, checking of leakage and testing on full load complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair the following spare parts of window / split type ACs of 1.5 / 2 ton capacity for replacement :- (a) Running capacitor 36 MFD Make : Usha/Capital/Epcos

(b) Starting capacitor 80 /100 MFD Make : Usha/Capital/Epcos

(c) Electronic circuit board for window / split type air conditioners of any capacity as per the existing make

(d) Gas filter for 1.5 / 2 Ton AC Make : Vijay/ Goldstar

(e) Blower motor with base plate for 1.5/2 ton AC Make : GE/Crompton Greaves

(f) PVC air filter for 1.5 Ton AC (AS per existing) Make : LG or Equivalent.

(g) Blower fan blade made of aluminium (as per exisitng) Make : Cosmo/ OG

(h) Contactor MR-1 Type for split AC make : L&T

(j) Front grill of suitable size for AC Make : Gem/Usha/Fedferlloyd/Carrier air cionditioner

(k) Thermostat switch for 1.5/2ton AC Make: Renutrol/Indfoss

(l) Connection lead of wire size 6 sq mm 3 core copper wire with PVC sheathed Make : Havells/ Plaza

(m) Capacitor 6 MFD for blower motor, Make : Usha. Seimens/Epcoss

(n) Wiring kit for Air conditioner 1.5/2 ton Make : Shri Ram/ Kirloskar

(o) Starting relay box type suitable for window/split AC 1.5/2 Ton with over load complete all as specified and directed by Engineer-in-charge.. Make:- Sriram/Hitech/Kirloskar.

(p) Rubber bushing for mounting fan motors in window type AC

(q) supply and fix PVC mesh filter suitable for 1.5/2ton window ac suitable for existing

M&L for writing SM No., MES No. etc, on refrigerator,deep freeger, AC etc at site with approved shade/color of synthetic enamel paint, height of letter 40 mm and up to 13 Nos in words/Figures complete all as specified and directed by Engineer-in-charge.

S&F in repair cooling coil suitable for 1./25 ton AC complete all as specified and directed by Engineer-in-charge.

S&F in repair Heating unit suitable for1.5/2 ton AC split / window type ISI marked of required quantity including testing on full load complete all as specified and directed by Engineer-in-charge.

M/S MALHI CONSTRUCTIONS