REPAIR TO INTERNAL ROADS UNDER AGE B/R-II OF GE (N) MEERUT CANTT

Amount

Preparing the black top surface of roads by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc applying by providing evenly a priming/ tack coat with bitumenous primer (paving bitumen) @ 5 Kg/10 Sqm complete all as specified and directed.

M&L bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder (viscosity grade VG-10) content by weight of total mix, rolled and compacted to required camber and gradient, and laid with mechanical paver and rolled to a uniform smooth surface with 8 to 12 ton power roller and compacted to required camber and gradient complete all as specified and directed.

M&L premix bituminous macadam mixed with paving bitumen 4% binder (viscosity grade VG-10) content any penetration laid/rolled and campacted to require gradients and camber (consolidated thickness n.exc 75mm) with 8 to 10 ton power roller complete all as specified and directed.

M&L for excavation in soft/loose soil in trenches not exceeding 1.5m wide and not exceeding 1.5m depth complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50m and at a level not exceeding 1.5m complete all as specified and directed.

M&L for continous brick edging with fly ash brick with width equal to brick width of brick, laid dry on end vertically incl necessary excavation and earth work for embadding bricks in the ground to the depth as directed and tempering ground around the bricks and removing surplus soil to a distance n.exc 50m all as specified and directed.

M&L for dismantling of concrete as in kerb stones complete all as specified and directed.

M&L for precast cement factory made in Kerb Stone of grade M-20 set in cement mortar 1:6 complete all as specified and directed.

M&L for preparation of new surface of kerb stone over 10cm girth or width including priming and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for 75mm thick (compacted thickness) Water Bound Macadam (WBM) with coarse aggregate of grading 2 (63 to 40 mm size) or grading 3 (50 to 20mm size) spread rolled with 8 to 10 Ton power roller and consolidated to gradient and camber required with lime stone, sand stone complete all as specified and directed.

M&L Preparing WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 10kg per 10 Sqm complete all as specified and directed.

M&L for cleaning the road surface and applying evenly cold emulsion at the of 10kg per 10 sqm on the surface of existing road using spray machine complete all as specified and directed.

M&L for providing and laying 25mm bitumen mastic wearing course (as per specification) with industrial bitumen of grade 85/25 conforming to IS:702 prepared by using mastic cooker and laid to required level and slope including providing anti skid surface with bitumen recoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 Sqm and at approximate spacing of 10cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface including cleaning the surface removal of debris etc complete all as specified and directed. (considering bitumen using 10.2% as per MORTH specification).

M&L for demolition of old damaged cement concrete road side bench complete all as specified and directed.

M&L for stainless steel bench Grade-304, 3 seater with back rest & arms, colour shining silver, chrome finish having dimensions 62cmx174cmx78cm (height) complete all as specified and directed. Make – Nilkamal Italia or of equivalent make as approved by GE.

S&F in repair Bi-Directional Reflective type Road solar studs (90mm x 100mm x 17mm) illuminated red both sides of rectangular/ square shape made out of thermoplastic body fixed on road with bitumen adhesive as per manufacturer's instructions having abrasion resistance ceremic coating and reflective surface complete all as specified and directed. Make - 3M or of equivalent make as approved by GE.

S&F in repair cat eyes ABS body with scratch and abrasion resistance micro prismatic polycarbonate and utrasonically welded lenses of termreture reisistant body and lens of size 90mmx100mmx17mm fixed on road with bituminous adhesive as per manufacturers instructions having abrasion resistance creamer coating and reflective surface complete all as specified and directed. Make - 3M (ID-28994191) road studs cat eye aised pavement marker series 290, (colour red and yellow) or of equivalent make as approved by GE.

S&F in repair long delinator made out of powder coated medium grade MS pipe 80mm dia, 1.10 Mtr heigh (0.80 above ground level and 0.30 below ground level) wrapped with three Nos high intensity reflection tape in red, yellow, white in colour of 150 mm height and 50 micron thickness of each. Reflected portion covered with welded mesh of 3mm wire dia and 50 mm x 50 mm mesh including necessary painting, excavation and embedding in PCC (1:2:4) block size of 250 mm x 250 mm x 350 mm complete all as specified and directed. Make- 3M (ID-31928514) as per IRC 79-2019 reflecting sheet used as per IRC 67-2012 or of equivalent make as approved by GE.

S&F in repair long solar delinator made out of medium grade MS Pipe 75mm dia, 1.20m height (0.90m above GL and 0.3m below GL), wrapped with three Nos of high intensity reflection tape in red, yellow and white in colour of 150mm height and 50 micron thickness of each reflected portion covered with welded mesh of 3mm wire dia and 50mmx50mm mesh incl necessary painting, excavation and embedding in PCC (1:2:4) block of size 300mmx300mmx300mm complete all as spciefied and directed. Make- 3M or of equivalent make as approved by GE.

S&F informatory reflective direction and place identification sign board without double post stainless steel pipe frame on 2mm thick aluminium sheet size as ordered with high intensity prismatic tap with both side writing complete all as specified and directed. Make - SUN EYEZ Road safety products CAT No SE-1005 or equivalent, M/s Muskan Safety Solution Pvt Ltd New Delhi, M/s Ashu Enterprises, M/s Mitul Marketing (Note- Colour and pattern as per approved by GE).

S&F in repair fully Retro reflective cautionary sign board of any shape without single post stainless steel pipe frame on 2mm thick aluminium sheet size of board exceeding 0.30 Sqm but not exceeding 0.60sqm having one coat zinc chromate stoving prime and two coats of stoving enamel grey and both sides, having front side entire surface finally bonded with retro reflective sheeting of Engineer grade having pressure sensitive adhesive, boarder and message (length, letters, numerals etc) cut out or screen printed complete and specified and directed. Make- SUN EYEZ Road safety products CAT No SE-1005 or equivalent, M/s Muskan Safety Solution Pvt Ltd New Delhi, M/s Ashu Enterprises, M/s Mitul Marketing. Note- Colour and pattern as per approved by GE.

S&F stainless steel post of 60mm dia and 16 guage, Grade-304 duly polished for best shine fitted with round globe on top as in sign board frame complete all as specified and directed. Note - Pattern as per approved by GE.

Excavating in soft/disintegrated rocks for post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cleaning the road surfaces of dirt, oil/grease and forgein materials etc and applying 2.5 mm thick of road marking strips (retro reflective) of white/yellow colour using hot thermoplastic materials by fully/semi automatic thermoplastic paint through authorised applicator complete all as specified and directed.

Arun Construction Co.

Tridev Construction Company

HIND CONSTRUCTIONS

Maa Vaishno Enterprises