Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC SAINIK SOCIETY HITKARINI DENTAL COLLEGE DUMNA ROAD JABALPUR MP 482001 | JABALPUR | JABALPUR | MP | 482001 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹42.4 L+₹2.9 L (7.21%)Rejected-Finance VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L2 | Rejected-Finance Higher rate quoted | |
| 3 | L3₹43.2 L+₹3.6 L (9.10%)Rejected-Finance VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L3 | Rejected-Finance Higher rate quoted |
Tender Value
₹47.6 L
EMD Value
₹95,300
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_539630_1
8400-834/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D, Cat a (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹95,300
Yes
23 Sept 2022
20 Jul 2022
19 Aug 2022
20 Jul 2022
17 Aug 2022
3 Aug 2022
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
All as per item No 2.00 mentioned here-in-above but depth exc 1.5 m but n.exc 3 m complete all as specified and directed
Moorum/red bajri filling in floors or in foundation, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed
M&L for broken stone hardcore of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete (Design Mix), M-25 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L for reinforced cement concrete (Design Mix), M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for reinforced cement concrete (Design Mix) M-25 (using 12.5 mm graded stone aggregate) as in chajjas and similar work complete all as specified and directed by Engineer in Charge.
M&L for reinforcement cement concrete (design mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
S&F mild steel TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed by Engineer in Charge.
All as per item No 12.00 mentioned here-in- above 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.
Form work to chajja and similar work including edges for rough finished surfaces complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (horizontal or sloping) complete all as specified and directed
M&L for 40 mm thick damp proof course in cement concrete type B-0, 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed
M&L for brickwork with fly ash bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:6) complete all as specified and directed
M&L for brick work with fly ash bricks straight or curve on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces of wall finished even and smooth with out using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:4) using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of wall complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
M&L for rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces of ceiling finished even and smooth with out using extra cement complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer on wall surface complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar)
M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for 25mm thick Cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in floor for levelling course complete all as specified and directed by Engineer-in-Charge.
M&L for non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over and including 10mm thick backing coat in CM (1:4) and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.
S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including two pairs of brasscup pivots, catch spring and pulleywheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type complete all as specified and directed.
M&L for framed work such as grills etc with ends of bars shouldered and or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed by Engr-In-Charge .
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm wood grain printed PVC shee twith mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed by Engr - in - Charge.
S&F butt hinges 100MM, medium weight, stainless steel all as specified and directed complete all as specified and directed
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 150 mm aluminium handle cast type, anodised, complete all as specified and directed
S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F vitreous china wash down water closet pan, Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.
S&F 10 ltr PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet and flush pipe, ball valve, float and handle including brackets complete all as specified and directed by EIC.
S&F vitreous china counter wash basin of size not less than (510X 410)mm including connection to bottle trap/waste pipe complete all as specified and directed by Engineer -in-Charge.
S&F vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed.
S&F pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.
S&F vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed complete all as specified and directed
S&F 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinal (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed
S&F CP health faucet with 1.50 Mtr long tube & hook complete all as specified and directed.
S&F for 40mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed
S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed
S&F CP Push type Urinal Flash Valve complete all as specified and directed by Engineer -in-Charge. (Make: M/s Jaquar / M/s Kohlar / M/s Cera)
S&F PVC flexible urinal waste pipe 1/2 inch dia fixed to urinal stall waste coupling complete all as specified and directed
S&F high pressure laminate urinal partition of minimum size (900x450x350)mm complete all as specified and directed
S&F bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F stop valve of 15mm bore, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.
S&F CP tubular towel rail 20mm dia D type 60cm between two flange including bracket complete all as specified and directed by Engineer -in-Charge
S&F PVC connection 15 mm size PTMT nuts of length length 600 mm complete all as specified and directed
S&F soap dish vitreous china white size 160x160x90mm approx complete all as specified and directed by Engineer -in-Charge
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed
S&F 15 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed.
S&F 20mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors complete all as specified and directed
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by EIC.
All as per item No 67.00 mentioned here-in-above but with access door complete all as specified and directed
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by EIC.
S&F 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.
S&F 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed
M&L for PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding on roof, finished fair and even without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick on fair faces on roof surfaces of concrete in CM (1:4) finished even and smooth without using extra cement with WPC complete all as specified and directed.
M&L for preparation of new surfaces of roof and applying two coats of Polyurethane(PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and directed by the Engr-in-Charge. (Note : (i) As per description of this item, minimum two cots of Polyurethane (PU) acrylic based wate proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii) Quoted rate shall be included for work in building/structure of any height. (iii) To be applied by authorised applicator).
M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed
Returning, filling in and including spreading, levelling, watering & well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
Removing of excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point in oft/loose soil complete all as specified and directed
M&L for brick work with fly ash bricks straight curved on plan exc 6 meter mean radius for manholes/septic tank/sok well etc/ in sewer works with old size bricks in Cement Mortar (1:4) complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:4) inside and outside brick wall of manhole /septic tank /concrete surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for setting coat of 3mm thick of CM (1:2), trowelled to even and smooth finish over rendering 15mm thick in CM (1:4) on fair faces of brick work finished surface even & smooth with using water proofing compound @ 2% complete all as specified and directed.
M&L for providing RCC precast cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed. (Note : Reinforcement shall be paid separately).
M&L for mild steel TMT bar 6mm to 8 mm dia, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified and directed by Engineer in Charge.
M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and directed.
Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160 mm dia minimum 4mm thick including jointing with coupler, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. (Note: Necessary PCC haunching/benching/packing shall be measured and paid separately).
M&L for 100mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for 50mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.
M&L for forming contraction (Dummy) joints 50mm deep x 10mm wide, filled with sealing compound Gde 'B' complete all as specified and directed
M&L for 75mm thick plain cement concrete type C- 2, 1:3:6 (using 40mm graded stone aggregate) as sub base complete all as specified and directed.
M&L for 50mm thick plain cement concrete type B- 2, 1:2:4 (using 20mm graded stone aggregate) as in pavement finished even & smooth complete all as specified and directed.
M&L for preparation of new surfaces of wall priming with alkali resistant primer and applying two coats of cement based paint complete all as specified and directed.
Supply only Chain link MS galvanised fencing of any mesh size or type complete all as specified and directed. (Note : Fixing of chain link fence will e measured and paid separately).
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. (Note : Chain link fencing will be paid separately).
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces n.exc 10 cm width or girth complete all as specified and directed.
Excavating in post holes n.exc 0.5 cum, in soft soil and getting out, returning, filling in and ramming earth in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surfaces all as required complete all as specified and directed.
S&F Post, roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
M&L for 75mm thick plain cement concrete type B-2,1:2:4 (using 40mm graded stone aggregate) as in floor, paving etc complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
S&F anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed
S&F sliding window shutter, Aluminium standard section 39.40 x 17.70 x 2mm (WS-4699) as in side of shutter, 39.40 x 17.70 x 2mm (WS-4698) as in shutter interlocking, 39.40 x 17.70 x 2mm (WS -4697) as in top and bottom, not divided into panels, including locking arrangement, necessary joining cleats, glazing clips, rubber packing anodized aluminium holdings and screws etc suitable for single glass, including powder coating(minimum thickness of powder coating 50 micron) complete all as specified and directed. (Note : Glass or wire mesh shall be paid separately)
M&L for 5.5mm thick plain sheet glass ordinary quality and glazing with oil putty exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge .
M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed to aluminium frame work complete all as specified and directed.
S&F 105x60mm (1.25mm thick) pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engr-In-Charge.
M&L for steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed.
S&F mild steel sliding door bolts 250mm long, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed complete all as specified and directed by Engr-In-Charge .
S&F 125mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed
S&F 2nd class small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n.exc 200 cu. cm each all as specified and directed by Engr-in-Charge
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed block for fixing of hold fasts etc complete all as specified and directed
M&L for painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .
M&L for 100mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base floor complete all as specified and directed.
Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick cement plaster in cement morar (1:3) on concrete surfaces as in ceiling, chajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed
M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.
S&F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed
M&L for chequered cement concrete tiles 20cmx20cm x 25mm thick set jointed and pointed in neat cement slurry ( with grey cement and pigment) over and including 15mm thick screed bed in cement mortar (1:6) for fixing tiles complete all as specified and directed.
M&L for plain cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in kerb/coping/benching/bed block complete all as specified and directed
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for setting coat of 3mm thick of CM (1:2), trowelled to even and smooth finish over rendering 10mm thick in CM (1:4) on fair faces of brick work finished surface even & smooth complete all as specified and directed.
S&F 2000 ltrs rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top with three layered) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge.
S&F high pressure PTMT float valve with epoxy coated aluminium rod and high density polyethylene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.
S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed
S&F 50 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
M&L for 500 Ltr capacity rotational/moulded Polyethylene water tank (Cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed
S&F ball brass valves, high pressure, with polyethylene float and flynut complete screwed for iron pipe or brass ferrule for 25mm dore complete including taking down complete all as specified and directed.
EM Portion M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, suitable for modular switches and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch modular type 6 Amp one way, one module, single phase, complete all as specified and directed by Engineer-in-charge.
S&F of decorative front plate with cover white or coloured for 8 modules complete all as specified and directed
All as per item No 136.00 mentioned here-in-above but 3 module complete all as specified and directed
S&F of blanking plates white or coloured for 1 modules complete all as specified and directed
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed
S&F 20 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 20 watt,6000K including necessary connection complete all as specified and directed.
S&F security light fittings 25 watts, minimum lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. (Make - Bajaj/Crompton/Phillips)
S&F 9 W LED mirror light fitting wall mounted batten 2ft, extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.
S&F metallic Exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed by Engr-in-Charge.
S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), triple pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed
S&F MCB SPN 63 Amps, 'C' curve, 240 Volts, ISI marked and to be housed in DBs complete including necessary connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F XLPE armoured cable 10 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured).
M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, buried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
Supply, laying/fixing/connecting, testing and commissioning of 16 Sqmm x 4 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. (Note: Excavation, sand cushioning, brick will be measured and paid separately).
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed.
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F MCB TPN 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F galvanized pipe 50 mm bore “light grade”, complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and directed.
ANIMA ENTERPRISE
UNIVERSAL TRADING
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .