Genernal fund work in Kalambur Town Panchayat

Amount

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering in CM 1:5 mix, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part ofM. Sand ), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Weathering course concrete with broken brick jelly of 20 mmhauge in pure slacked lime ( no sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5 by volume and laid over In a single layer and consolidated require designed and finished thickness by beating the concrete with wooden beaters of approved pattern , keeping the surface constantly welded springing lime jiggery water asper standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2 cm laid in cement mortar ( One of cement and three of sand ) mixing with water proofing compound conferment ISS at 2% weight of cement used and pointed with same waterproofing compound mixed with red oxide etc., complete with standard specification

White washing 2 coats using shell lime including cost and conveyance and all labour charges etc. complete

Painting two coat Exteriror Plastic Emulsion Point including cost of Exteriror Plastic Emulsion Point and labour charges etc., complete

Painting Two coats of new iron works such as steel doors,windows, ventilators, window bar, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats etc., complete complying

Supply of steel doors and windows

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.25)

Provision for Rain water arrangements