Karasingi to Badapada

Clearing and grubbing road land in area of light jungle including uprooting rank vagetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of tress cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including watering and cost of labour, cess & all materials etc. complete as per direction of Engineer in charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, moorum & sand to fill-up the interstices of coarse aggregate, watering and compacting to the required density including Royalty, Cost of coneyance, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges as admissible etc complete as per Technical Specification Clause 405 of MoRD by Mechanical means and as per direction of Engineer-In-Charge. (Grading No.-III)

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.40 kg per sqm on the prepared not primed surfaces & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD. and as per direction of Engineer-In-Charge. (By Mechanical Mean)

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 kg per sqm on the prepared primed surface & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD. and as per direction of Engineer-In-Charge. (By Mechanical Mean)

Providing, laying & rolling of the open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6 mm aggregates using VG-30 penetration grade bitumen @ 14.6Kg/10Sqm to required line grade & level to serve as wearing coarse on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100KN static roller capacity finished to required level and grades to be followed by seal coat of Type B including Royalty, Cost of coneyance, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges as admissible etc complete as per technical specification Clause-506 of MORD by Mannual Means & as per direction of Engineer-in-Charge.

Providing & laying 6mm thick precoated seal coat Type-B using 0.06 Cum of 6.7mm size chips as per sieve analysis and 6.8Kg of VG-30 grade bitumen per 10 Sqm. including hire and running chages of PRR, hot mix plant, tar boiler and all other T&P articles by manual means including Royalty, Cost of coneyance, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges as admissible etc complete as per technical specification Clause 508 of MoRD and as per direction of Engineer-in-Charge.