Repairing and Resurfacing of Executive Engineer Residence Approach Road and Assistant Engineer Sub Division Approach Road and Road of Executive Engineer Etawah Division Office Campus

Amount

Scraping of bricks dismentelled from brick work including stacking as per Technical Specification Clause 202.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel rollerto achieve the desired density, complete as per Technical Specification MORD Clause 401.

Providing, laying, spreading and compacting stone aggregates of specific sized to water bound macadam (75 mm thick) specification including spreading in uniform thickness, hand packing, rolling with smooth wheel static roller 80-100 kn in stages to proper grade and camber, applying and brooming, crushable screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading III as per Technical Specification Clause 405.

Dry bricks on edge pitching in sand including preparation of sub grade and joints with local sand including cost of sand.

Providing and applying tackcoat with bitumen (RS-1) using bitumen distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specififcation Clause 503

(MIXOL):-20 mm thick Open-Graded Premix Carpet using Bitiminous (penetration grade/modified bitumen) Providing and laying of open graded premix carpet of 20 mm thick composed of 13.20mm to 5.60 mm aggregates either using penetration bitumen or emulsion (bitumen VG-10) to required line, grade and leved to serve as wearing course on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 Kn static roller capacity, finished to required level and grades to be followed by seal coat of either type A or Type B or Type C as per technical Specification clause 508.

(PAVER FINISHER):-20 mm thick Open-Graded Premix Carpet using Bitiminous (penetration grade/modified bitumen) Providing and laying of open graded premix carpet of 20 mm thick composed of 13.20mm to 5.60 mm aggregates either using penetration bitumen or emulsion (bitumen VG-10) to required line, grade and leved to serve as wearing course on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 Kn static roller capacity, finished to required level and grades to be followed by seal coat of either type A or Type B or Type C as per technical Specification clause 508.

Providing and laying seal coat sealing the voids on bituminious surface laid to the specified levels, grade and cross falls using Type C as per technical Specification clause 510.

Road marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous surface. Providing & laying of Hot Applied Thermoplastic Compound 2.5 mm thick including Reflectorising Glass Beads @ 250gms per sqm areas. Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35-2015. The finished surface to be level, uniform and free from streaks and holes.

Dry flat bricks pitching in sand including preparation of sub grade and filling joints with local sand including cost of sand.

Santosh kumar Yadav

M/S JAL DEVI

RAJVEER SINGH