WBPWD/AESSKMHSD/NIT08/26-27/21

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding WindowofallAluminiumsectionsviz.windowframe(top,bottom&side frame), shutter (top, bottom, side & interlock member) made of aluminium alloyextrusionsconformingtoIS733-1983&IS1285-1975,annodised conforming toIS1868-1983, fittedwithall otheraccessories viz.PVC roller,EPDMgasket,maruti lock, screwsetc. includinglabourcharges for fitting&fixing of aluminium2-track/3-track slidingwindowwith fixingofglass(excludingcostofglass) allcompleteasperarchitectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as perarchitectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white.

Supplying fitting & fixing in position 9 mm thick Heavy Duty Cement board - Type- A (High Pressure steam cured, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, density > 1450kg/m3, Bond strength 15 N/sqmm fire resistant, termite proof, moisture resistant) reinforced with cellulose fibre manufactured through autoclaving process as per IS : 14862 & ISO 8336, with fibre cement screws in partition excluding cost of supporting structure as per drawings and direction of Engineer-in-Charge complete. (Note: The Item -26 under Section - U (Page - 247) can be used as supporting structure for internal partition ).

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass.

Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Supplying, fitting & fixing 1st quality Ceramic tiles in FLOORS to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile, setting the tiles with 2 mm thick spacer & finishing the joints with 100% stain free, chemical and temperature resistant, anti-becterial and anti-fungal epoxy Brout with approved manufacturer to match the colour of tiles including roughening of concrete surface, if necessary including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-i n-Charge. With Sand Cement Mortar (1: ) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ Z.9LKClSq.m, including spacer- 2 mm & finishing the joints with epoxy Srout . (FOR TOILET FLOOR OF HOSPITALS) Area of each tile above 0.09 Sq.m Coloured decorative

Supplying, fitting & fixing 1st quality Ceramic tiles in WALLS to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile, setting the tiles with 2 mm thick spacer & finishing the joints with 100% stain free, chemical and temperature resistant, anti-becterial and anti-fungal epory grout with approved manufacture to match the colour oftiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m , including spacer- 2mm & finishing the joints with epory grout . (FOR TOTLET WALL OF HOSP|TATS) Area of each tile above 0.09 Sq.m Coloured decorative

Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. Area of each Granite slab above 1.00 Square meter. Gr. floor