Construction of State Cancer Institute at Radha Krishanan Medical College Hamirpur at Jol Sappar Tehsil Nadaun District Hamirpur (HP).

Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil upto 2.00 mtr lead in acquired width including its stacking leveling dressing including all lead and lifts by head load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public/ private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus materials/excavated soil as per specification, approved drawing, design, specification and as per the entire satisfaction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any oyher mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public/ private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing & Filling in plinth with hard stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement isto four sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation & plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation & plinth complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20N/mm square (Twenty newton per square millimetre) with cement contents not not less than @ 320 Kilogram/Cubic metres (at the rate Three hundred twenty kilogram per Per Cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not not less than @ 360 kg/cum (at the rate Three hundered sixty kilogram per cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. .

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-35 (M-thirty five) design mix to obtain the compressive strength of 35 N/mm square (Thirty five Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @ 500 Per Kilogram/Per cubic Metre (five hundered kilogram per cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-35 (M-thirty five) design mix to obtain the compressive strength of 35 N/mm square (Thirty five Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @ 500 Per Kilogram/Per cubic Metre (five hundered kilogram per cubic metre) or as per approved design mix for All works above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing plinth protection with 50 mm (Fifty millimetres) thick interlocking paver blocks of M -30 (M-thirty) grade of NTC or its equivalent with 23cm (Twenty three centimetres) diametre Half round stone ware pipe for drainage purpose laid over 25cm (twenty five centimetres) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings balconies and access platform or other similar works for upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in stairs cases with slopping or stepped soffits, (excluding landing) except spiral staircase upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engin

eer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses, vertcal fins and other similar works complete upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts square, rectangular, polygonal etcetera for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels sides and soffits of beams haunchings, cantilevers, bressumers and lintels for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in edges of slab and breaks in floors and walls any thickness for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuutering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for in situ-reinforced concrete & plain concrete work in window sills, cornice and moulding and the like upto all floors level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete & plain concrete work in weather shades, Chhajjas, corbels etcetera including edges including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete & plain concrete work in vertical fins and vertical sun breakers or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-500D or more (five hundered or more ) of Sail / TATA for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, fabrication and erection in position structural steel work of Tata / Sail / Reliance/Jindal Steel work welded in built up sections, in in gratings framed guard bars, stringers, treads, landings etcetera of stair cases, including use of chequered plate and other similar works wherever required including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required and works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing, fabrication and erection in position structural steel work of Tata / Sail / Reliance/Jindal Steel work welded in built up sections, in railling, brackets, gates and other similar works, including use of chequered plate wherever required including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required and works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing, fabrication and erection in position struc

tural steel work of Tata / Sail / Reliance/Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing staircase railing having Readymade Mild Steel Hollow pipe (D-section) 50 x 50mm (fifty into fifty millimetre) diameter slip resistant handrail with round ends and baluster of 20 x 20mm (twenty into twenty millimetre) & 12 x 12 mm (twelve into twelve millimetre) Mild Steel solid square bars with combination of 37.5mm x 5mm (thirty seven point five into Five millimetre) Mild Steel flat as per detail a clear height of 85cm (eighty five centimetre) at 30cm c/c (thirty centimetre centre to centre) jonting in cement concrete steps. The vertical balusters to be welded or jonted with Mild Steel hollow 50 x 50mm (Fifty into fifty millimetre) hand rail and (40 x 40 x 3.5)mm (forty into forty into three point five millimetre) cat walk & railing with applying a coat of red lead paint complete as per approved drawing , design and specifications as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel 316 (three hundered sixteen) grade, 50 mm (Fifty millimetres) or 38 mm (Thirty eight millimetres) diametre SST (Stainless steel) pipe handrail fixed with 35mm (Thirty five millimetres) diametre stainless steel baluster, as per detail in combination of 35mm (Thirty five millimetres) and 15/20mm (Fifteen or twenty millimetres) diametre SST pipe baluster knock down railing of KICH or its equivalent hand rail fixed on 10x50mm (Ten into fifty millimetres) stainless steel flat balusters, (DESIGN CODE DT53-2-163) placed at 1200 mm (One thousand two hundered millimetres) centre to centre along with 3 nos (Three Numbers) @ 16 mm (Sixteen millimetres) mid rail connected at the side of the baluster with fixtures. The baluster would be fixed on the floor with casted base plate minimum 6mm (six millimetre) thick base plate shall be concealed with suitable Stainless Steel 316 (three hundered sixteen) grade cover cap railing made of Hollow tubes, channels, plates etcetera, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetera, of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel 316 (three hundered sixteen) grade, 50mm (Fifty millimetres) diametre SST (Stainless steel) pipe of KICH or its equivalent handrail slip resistant in ramp at two level, 75cm (Seventy five centimetres) and 90cm (Ninety centimetres) height welded with 25mm (Twenty five millimetres) diametre Stainless steel hollow pipe balusters embedded in cement concrete 60cm (Sixty centimeters) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow Stainless steel pipe of 50mm (Fifty millimetres) diametre. It should extend 30cm (Thirty centimetres) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of Tata / Sail / Reliance/Jindal hisar having mild steel channel sections of size 75x40x4mm (seventy five into forty into four millimetre) and Mild Steel angle 25x20x3mm (twenty five into twenty into three millimetre), joints mitred and welded by Mild Steel flat iron 40x12mm (forty into twelve millimetre) to the existing T- iron frame size 25x25x3mm (twenty five into twenty five into three millimetre), and Z-sections as per detail to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Single rebate angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X5mm, (forty millimetre into forty millimetre into five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm (fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing second class teak wood work in frames of doors,windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diametre & length , including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 65 x 100mm (sixty five into one hundered millimetre) factory made single extruded WPC (Wood Polymer Composite) solid doors/ windows / Celestory windows & other Frames / Chowkhat approved make of Alstone, Floresta, Ecoste, Century ply, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with ful body threaded star headed SS screws having minimum frame density of 850 Kilogram/Per Cubic metre (Eight hundered fifty kilogram per Per Cubic metre), screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2 (fifty eight newton per millimetre square), modulus of elasticity 900N/mm2 (Nine hundered newton per millimetre square), and resistance to spread of flame of CIass A category with property of being Termite / borer proof, water / moisture proof and Fire retardant and fixed in position with M.S hold fast / lugs / SS dash fasteners of required diametre and length including

carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators approved make Fenesta, Duroplast, Aluplast, Prominance, comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (all series) frame 47 x 50 mm (forty seven into fifty millimetre) & mullion 47 x 68 mm (forty seven into sixty eight millimetre) both having wall thickness of 1.9 ± 0.2 mm (one decimal nine millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed window approved make of Fenesta, Duroplast, Aluplast, Prominance, comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kilogram (forty kilogram), G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm (fifty two into forty four millimetre) & sash 32 x 60 mm (thirty two into sixty millimetre) both having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed window approved make of Fenesta, Duroplast, Aluplast, Prominance, upto all height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kilogram (forty kilogram), G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window with fly proof Stainless Steel wire mesh (Two numbers glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm (ninety two into forty four millimetre) & sash 32 x 60 mm (thirty two into sixty millimetre) both having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows approved make of Fenesta, Duroplast, Aluplast, Prominance, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels (each end consisting of one glazed sash opening outward and one fly proof mesh with stainless steel (304) sash opening inward with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm)(three hundred fifty into nineteen into one point nine millimetre) made of (all series) frame 58 x 60 mm (fifty eight into sixty millimetre), glazed sash 60 x 75mm (sixty into seventy five millimetre), wir

e gauge sash section 60 x 75 mm (sixty into seventy five millimetre) & mullion 60 x 75 mm (sixty into seventy five millimetre) all having wall thickness of 1.9 ± 0.2 mm and double glazing bead of appropriate dimension. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows approved make of Fenesta, Duroplast, Aluplast, Prominance, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with top fixed with Stainless Steel friction hinges 350 x 19 x 1.9 mm (three hundered fifty into nineteen into one decimal nine millimetre) made of (all series) frame 47 x 50 mm (forty seven into fifty millimetre), sash 47 x 68 mm (forty seven into sixty eight millimetre) & mullion 47 x 68 mm (forty seven into sixty eight millimetre) all having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed door approved make of Fenesta, Duroplast, Aluplast, Prominance, comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 Kilogram (one hundered twenty kilogram), G.I fasteners 100 x 8 mm (one hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding door made of (big series) frame 67 x 50 mm (sixty seven into fifty millimtere) & sash 46 x 82 mm (forty six into eighty two millimetre) both having wall thickness of 2.3 ± 0.2 mm (Two decimal three millimetre plus minus zero decimal two millimetre) and single glazing bead / double glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door approved make of Fenesta, Duroplast, Aluplast, Prominance, comprising of uPVC multi- hambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm (One hundered into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm (sixty seven into sixty four millimetre) & sash 67 x 110 mm (sixty seven into one hundered ten millimetre) both having wall thickness of 2.3 ± 0.2 mm (Two decimal three millimetre plus minus zero decimal two millimetre) and single glazing bead / double glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made coloured powder coated/anodised aluminium work (wooden or other shades) for frame of doors, windows, ventilators and glazed partitions of Jindal / Hindalco / Kunal aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081 of Jindal / Hindalco etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass

/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST and other taxes imposed by the Government.

Providing and fixing factory made coloured powder coated/ anodised aluminium work (wooden or other shades) for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge (Glazing & panel fill to be paid for separately). For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST and other taxes imposed by the Government.

Providing and fixing 40mm (forty millimetre) thick First Class deodar wood panelled or panelled and glazed shutters for doors windows and clerestory windows having top rail 100x40mm (One hundered into forty millimetre), style 100x40mm (One hundered into forty millimetre), middle rail 150 x 40mm (One hundered fifty into forty millimetre) and bottom rail shall be 200 x 40mm (Two hundered into forty millimetre) infill with 16mm (sixteen millimetre) thick 2nd class deodar wood wooden plank including brass butt hinges with necessary screws and 12x17.5mm (Twelve into seventeen point five millimetre) wooden beading, and lipping/ outer moulding 50x12.5mm (Fifty into twelve point five millimetre), complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge. The rate are inclusive of octroi, royality, Malkana, Toll tax, GST and other taxes imposed by the Government.

Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked vision panel flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters with providing vision panel not exceeding 0.10 (zero point one zero) Per square metre in all type of flush including Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (thirty five millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter approved make of Alstone, Floresta, Ecoste, Century ply in required size comprising of virgin polymer of K value 58 (fifty Eight) to 60 (Sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 (twelve) for 100gms (hundered grams)) having minimum density of 850 Kilogram/Per Cubic metre (Eight hundered fifty kilogram per Cubic metre) and screw withdrawaI strength of 1800 N (Eighteen hundered newton) (Face) & 900 N (Nine hundered newton) (Edge), minimum compressive strength 50 N/mm2 (fifty newton per sqaure millimetre), modulus of elasticity 850 N/mm2 (eight hundered fifty newton per sqaure millimetre) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk, S.S screws, complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Provid ing and tixing 18mm (Eighteen millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board Iaminated with PVC foil of mininum 14 (fourteen) micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom or kitchen cabinet etc . of required sizes comprising of virgin polymer of K value 58 (fifty Eight) to 60 (Sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 750 Kilogram/Per Cubic metre (seven hundered fifty kilogram per Cubic metre) and screw withdrawaI strength of 1800 N (Eighteen hundered newton) (Face) & 900 N (Nine hundered newton) (Edge)), minimum compressive strength 50 N/mm2 (fifty newton per sqaure millimetre), modulus of elasticity 850 N/mm2 (eight hundered fifty newton per sqaure millimetre) and resistance to spread of flame of Class A category with property of being

Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunI‹ S.S screws, all as per direction of Engineer-In- Charge including carriage of material within all leads, lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick Commercial Board water proof shutters with PGI sheet lining inside in SDB shutter including fixing with SS-304 (three hundered four) butt hinges with screws etcetera of Nova pan / Kit ply / National /Archidply / Action Tesa/ Green Ply complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) thick glazed fire resistant door shutters of 60 (sixty) minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm (One hundered millimetre) wide, bottom rail 200mm (Two hundered millimetre) wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2 (One hundered twenty grams per sqaure metre)) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etcetera, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing Lead-free Radiation Shielding interlocking door with sensor systems as per AERB norms. The door is fabricated with with standard frame, both faces shall be finished with Stainless Steel sheet 1.2mm (One point two millimetre) thick, and filled with lead-free radiation shielding core (such as high-density composite, copper tungsten alloy, or proprietary shielding material) of equivalent radiation attenuation to 3.2 mm (three point two millimetre) lead thickness or as per radiation level requirements. The door shall be complete with steel frame, heavy-duty hinges, mortice lock set, door closer, radiation warning lights, and interlocking system as per AERB guidelines, complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing Lead-free High Energy Motorised Radiation Shielding interlocking doors with sensor systems as per AERB norms for high energy radiation facilities. The door fabricated with standard frame, both facing with 1.2mm (One point two millimetre) thick, and filled with lead-free high-density composite or copper-tungsten alloy or equivalent shielding material providing radiation attenuation equivalent to a minimum of 3.2mm (Three point two millimetre) lead thickness or as per radiation level requirements. The door shall include motorized sliding or hinged mechanism, fail-safe interlocking system, emergency override controls, radiation monitoring sensors, warning beacon lights and audio alarms, complete with all electrical connections and integrated control panel, complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing a standard MRI (Magnetic Resonance Imaging) door with radiation shielding seal with sensor systems, door frame and threshold fabricated from perforated 12 (Twelve) gauge stainless steel tube section. The door leaf constructed with 50mm x 75mm (Fifty into Seventy Five millimetre) stainless steel tube around the perimeter. The both facing of door shall be finished with 1.2 mm (One point two millimetre) thick and the core construction usesfilled with lead-free radiation shielding core (such as high-density composite, copper tungsten alloy, or proprietary shielding material) of equivalent radiation attenuation to 2.0mm (two millimetre) lead thickness or as per radiation level requirements. compliance with AERB norms and project specifications. Standard hardware includes heavy-duty routon hinges, twist/pull handle, deadbolt lock, and SS pill handle as per AERB guidelines, complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick HDMR Board (Action Tesa / Green Ply) with both sides 4mm (four millimetre) thick lead sheet lining and laid in position between brick wall cavity of operation theatre/ X-ray/ ultrasound or other similar works complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etcetera, with G.I. (galvanised Iron) beading made out of 1.6mm (One point Six millimetre) thick G.I. (galvanised Iron) sheet (zinc coating not less than 120gm/m² (One hundered twenty grams per sqaure metre)) of size 20 x 33mm (twenty into thirty three millimetre) screwed with M4 x 38 mm (M four into Thirty Eight millimetre) Stainless Steel screws at distance 75 mm (Seventy five millimetre) from the edges and 150 mm c/c (One hundered fifty millimetre centre to centre), including applying a coat of approved fire resistant primer/powder coating of not less than 30 (thirty) micron on G.I. (galvanised Iron) beading, & special ceramic tape of 5 x 20 mm (Five into twenty millimetre) size etcetera complete in all respect as per NBC 2016, IS 16231 (Part 3) : 2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 (Sixty) minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 (twenty) minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100mm (Eleven hundered millimetre) wide into 2200mm (Two thousan

d Two hundred millimetre) height or 2.42 sqm (Two decimal four two square metre), including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 12 mm (twelve millimetre) thick frameless toughened glass door shutter of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etcetra for fixing required door fittings, complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 12 mm (twelve millimetre) thick frameless toughened glass partitions of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus including all necessary fixing arrangement with Methylated spirit, SS, patch fitting and making required holes etcetra complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 8.0 mm (eight milimetre) thick strutural glass weight should not be less than 20.0 kg/ sqm (twenty kilogram per square metre) glazing of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in aluminium/uPVC/wood door, window, ventilator shutters and partitions etcetra complete with necessary screws, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 8.0 mm (eight point zero milimetre) thick toughened glass weight should not be less than 20.0 kg/ sqm (twenty kilogram per square metre) glazing of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in aluminium/uPVC/wood door, window, ventilator shutters and partitions etcetra complete with necessary screws, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 6.0 mm (six milimetre) thick toughened glass panes (weight not less than 15.00 Kilogram/ Square Metre) (Fifteen point zero zero kilogram per sqaure metre) Glass panes of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thickness float glass panes (weight not less than 15.0 Kilogram/ Square Metre) Fifteen point zero kilogram per sqaure metre) of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing Double Glass Unit, having 6mm (Six Millimetre) thick toughened inside and outside clear toughened glass hermetically sealed glazing of KT series or its equivalent with 10mm (Ten Millimetre) wide argon gas filled air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etcetera in aluminium windows, ventilators and partition etcetera with glass both side, as per specifications, drawings and direction of Engineer-in-charge complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 5mm (Five millimetre) thick froasted glass panes (weight not less than 12.50 Kilogram/ Square metre) (Twelve point five zero kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick Phenol bonded (both Side ) prelaminated BWP grade particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista of approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Fly proof stainless steel grade 304 (three hundered four) wire guage with 0.5mm (Zero point five millimetres) diametre wire and 1.4mm (One point four millimetres) wide aperture for doors windows and clerestory windows with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 8mm (Eight millimetre) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved make (Hidalco/Jindal) and as per approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm (at the rate two hundered millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete at all levels including entire carriage of material upto all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-In-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) grills of require pattern in wooden/steel frames of windows etcetera with 12 x 6mm (Twelve into six millimetre)Mild Steel Flats in combination with 10 x 10mm (Ten into Ten millimetre) square bars with round headed bolts and nuts or by screws complete all as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate are inclusive of octroi, royality, Malkhana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60 mm (Zero point sixty mi

llimetres) thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine or its equivalent, in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing polycarbonate Corrugated transparent or Skylight sheet 2.8mm(two point eight millimetre) thick in roofing/flashing/ridges,valleys etcetera with necessary Galvanised screws, nuts, washer etc. complete with all accessories as required as per approved make (Lexun, Duratuff, Suntuff (PalRam) in all shades like Clear transparent, Bronze, Grey, Gold, Aqua Green (Solar Olympic), Solar Ice, etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Multi Wall polycarbonate transparent or Skylight sheet 10mm (Ten millimetre) thick in roofing/flashing/ridges,valleys etcetera with necessary Galvanised screws, nuts, washer etcetera complete with all accessories as required as per approved make (Lexun, Duratuff, Suntuff (PalRam) in all shades like Clear transparent, Bronze, Grey, Gold, Aqua Green (Solar Olympic), Solar Ice, etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata Durashine or its equivalent in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6mm (Six millimetres) dia & prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine or its equivalent steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing flushing 38cm (Thirty eight centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet of Tata Durashine or its equivalent in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 0.80 mm (Zero decimal eight millimetre) thick with zinc coating not less than 275 gm/m² (two hundered seventy five millimetre gram per square millimetre), 30cm (thirty centimetre) wide and 25cm (twenty five centimetre) deep, 80cm (eight centimetre) overall semi-circular / finished U-shaped as per design / plain prepainted G.S sheet gutter of Tata Durashine or its equivalent with iron brackets 40x3mm (forty into three millimetre) size, bolts, nuts and washers etcetera, including proving & fixing dome shape grating and making necessary connections with rain water pipes complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Mild Steel B.P. sheet 1.66mm to 2.0mm (one point six six millimetre to Two point zero millimetres) thick eaves board/facia/soffits/ceiling of Tata/ Sail/ Jindal hisar including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel brackets made of vertical post 100x50mm (hundered into fifty millimetre), main frame of 50x50x3.0mm,(fifty into fifty into three millimetre) distribution member shall be 25x25mm (twenty five into twenty five millimetre) of, hollow pipe of specified shape, projecting 450mm (four hundered fifty millimetre) outside the wall surface and 450mm (four hundered fifty millimetre) length fixed on wall with 4 (four) numbers, 6mm (six millimetre) diametre expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etcetra The side M.S flat for brackets & centre piece shall be welded and fixed with M.S. nuts, bolts, & washers of size 25x3mm (twenty five into three millimetre), one bolts on Each side on the both sides of 50x50mm (fifty into fifty millimetre) hollow pipe, total length is 900mm (nine hhundered millimetre) and angular length is 425mm (four hundered twenty five millimetre) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing decorative screen in corridor manufactured from 25mm x 25mm (twenty five into twenty five millimetre) hollow square pipes welded with mild steel hollow sections of size 50mm x 50mm (fifty into fifty millimetre), supported on 10 cm (ten centimetre) diametre mild steel hol

low pipes. A centre piece shall be of 25 x 3mm (twenty five into three millimetre) mild steel flat frame covered with Mild Steel black sheet with flower pattern, made to shape and applying a priming coat of approved steel primer using structural steel complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing laboratory storage cupboard fabricated from 1.00mm (one millimetre) thick prime quality mild steel (MS) sheets, free from rust and scale, all shop-welded and finished smooth, of standard size 900mm width x 450 mm depth x 1800 mm (Nine hundered into four hundered fifty into Eighteen hundered height), having double-leaf hinged doors and a minimum of four adjustable shelves (load-bearing, suitably stiffened), with necessary stiffeners, supports, and MS internal frames as required. The cupboard shall be thoroughly cleaned, surface-prepared by seven-tank pre-treatment process, and finished with minimum 70–80 (seventy to eighty) micron thick oven-baked epoxy/polyester powder coating of approved shade (inside and outside), anti-fungal and highly corrosion resistant 100 (One hundered) hours Salt Spray passed tested) as per approved make (Akzon or Polybond.), to ensure durable, chemical resistant finish suitable for laboratory use. The cupboard shall be complete with heavy-duty hinges, handles, locking arrangements (Godrej or equivalent branded, with three keys), adjustable leveling legs, and necessary hardware. All joints shall be ground flush and edges deburred for safety. The cupboard shall be placed in position, aligned, and fixed with approved fasteners or base plates to floor/wall as required, including making good any damages, cleaning, and disposal of debris, complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Fixing factory fabricated, modular, prefabricated wall/ceiling panels, comprising double-skin panels with front face of Stainless Steel Grade 304 (three zero four) sheet 1.0mm (One point zero millimetre) thick with smooth, antimicrobial brushed/matt finish, and back face of powder-coated galvanized/pre-painted steel sheet (minimum 0.60mm (zero point Six Zero miilimetre)), pressure-injected with PUF insulation (density 40kg/m³ ± 2kg)(forty kilogramme per cubic metre plus minus two kilogramme). All panels to be minimum 50mm(fifty millimetre) thick, with tongue-and-groove or interlocking joinery, sealed with medical-grade silicone for a seamless, hermetically sealed finish. Panels to be fixed on a supporting Stainless Steel-304 (three zero four) sub-structure fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8mm dia and 75mm (Seventy five millimetre) long bolt including providing aluminium washers 2mm (Two millimetre) thick & 15mm (Fifteen millimetre) diametre, at a staggered pitch of 200mm (Two hundered millimetre) centre to centre including drilling holes in the receiving surface by providing expandable plastic sleeves in holes etc. and making provision for integrated services (cutouts for medical panels, HVAC grills, lighting, etc.). All material and execution to conform to relevant NABH/ISO standards and manufacturer’s specifications, including SS-304 coving for floor ceiling-wall junctions, and testing, complete in all respects as per design, drawings, and including carriage of material within all leads, lifts and other incidentals, as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Fixing factory made prefabricated wall panels, comprising double skin partition wall upto ceiling height, having overall thickness of 67mm (Sixty seven millimetre) using Everest GI (Galvanised Iron) steel sections (0.55 mm (Zero point five five millimetre) thick, 51mm (Fifty one millimetre) wide having two flan

ges 40 mm (forty millimetre) & 42 mm (Forty Two millimetre)) placed at 600 mm center to center in 51 mm (Fifty one millimetre) floor & ceiling channel (0.55mm (Zero point five five millimetre) thick having equal flanges of 32 mm (Thirty Two millimetre) Galvanised Iron steel. The both faces of partitions shall be of 8mm (Eight millimetre) thick fibre cement board (high pressure steam cured), plain (premiered, recessed 7 (seven) sealant coated) boards confirming to IS 14862 : 2000, shall be fixed on the frame work from both sides using 25mm (Twenty five millimetre) fully threaded self embedding type everest fibre cement screws @ 300 mm c/c (at the rate three hundered millimetre centre to centre) on either side of everest side of Galvanised Iron studs/frame work. in between the two boards 50mm (Fifty millimetre) thick rock wool of 48 kg (Forty eight kilogramme) density shall be provided. the jointing of the board shall be done with elasto prefab joint sealant and paper tape as per the procedure laid down by the company. All material and execution to conform to relevant ISO standards and manufacturer’s specifications, including testing, complete in all respects including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing (2400 x 1200 x 12)mm (Twenty four hundred into Twelve hundred into Twelve millimetre) green chalk board (Non - Megnatic) with superior quality framing speacially anodised alumunium profile 20x15mm (twenty into fifteen millimetre) with corners of black surfaces shall be Non - Porous ceramic particles on the top green surface for smooth writing with chalk over 11mm (Eleven millimetre) thick particle board which shall have backing maetirials of galvanised sheet 0.28mm (Zero point two eight millimetre) thick. The board shall be fixed on the wall with speacialy desigined 'J' Clamp and suqare clamp with the help of nylon shalves and screws as per site requirement including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x600x6mm (six hundred into six hundred into six millimetre) Aluminium Composite Panel ceiling of Alstone,Aludecor,Eurobond, Alstrong with pre-painted GI (galvanised iron)channel framing @ 600mm (at the rate six hundered millimetre) centre to centre with suitable screw complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm (five hundred ninety five into five hundred ninety five millimetre) of Gyproc, Armstrong, Everest as per approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (zero decimal five zero) (minimum) as per IS 8225:1987, Light reflectance of 85% (eighty five percent) (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100% (hundered percent), thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 16mm (sixteen millimetre) thick mineral fibre false ceiling tiles at all heights of size 600x600mm (Six hundered into Six hundered millimetre) of approved texture, design and pattern with wood wool backing and Rai wood border. The tiles should have Humidity Resistance (RH) of 99% (Ninety nine percent), Light Reflectance > 85% (Eighty five percent), Thermal Conductivity k = 0.052 - 0.057 w/m K (zero point zero five two - zero point zero five seven) , Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm (Zero point Three Three millimetre) thick (galvanized @120 gsm) (at the rate One hundered twenty grams per square metre) comprising of main T-runners of 15x32mm (Fifteen into thrity two millimetre) of length 3000 mm, (Three thousand millimetre) cross-T of size 15x32mm (Fifteen into thrity two millimetre) of length 1200 mm (One thousand two hundred millimetre) and secondary intermediate cross T of size 15x32 mm (Fifteen into thrity two millimetre) of length 600 mm ( six hundred millimetre) to form grid module of size 600x600 mm (Six hundered into Six hundered millimetre) suspended from ceiling using galvanized mild steel item (galvanised @ 80gsm) (At the rate Ei

ghty grams per square metre ) 50mm (Fifty millimetre) long 8 mm (Eight millimetre) outer diameter M-6 (M-Six) dash fasteners, 6 mm (Six millimetre) diameter fully threaded hanger rod up to 1000 mm (One thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm, (Eighty five onto twenty five into Two millimetre) spaced at 1200 mm (One thousand two hundered millimetre) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24x3000 mm (Twenty four into Twenty four into Three Thousand millimetre) made of 0.40 mm (Zero point four zero millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm (Four hundered fifty millimetre) centre to centre and 40 mm (Forty millimetre) long dry wall stainless steel screws complete. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights.complete including curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x600x6mm (Six hundred into six hundred into six millimetre) designer fiber board of Everest, Alstone,Aludecor,Eurobond, Alstrong (E-Board) ceiling with hot dipped galvanized steel sections (galvanized @ 120 grams/Square Metre (at the rate one hundered twenty grams per square metre) channel framing @ 600mm (at the rate Six hundred millimetre) Centre to Centre complete including curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing plaster of Paris (gypsumanhydrous) ceiling for all floor level, overover hot dipped galvanized steel sections (galvanized @ 120 grams/Square metre (one hundered twenty grams per square metre), both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm ( twenty four into thirty eight millimetre) made from 0.30 (zero point three zero millimetre) mm thick (minimum) sheet on desired grid with 10mm (ten millimetre) gap in between and reinforced with rabbit wiremesh fixed to G.I. frame complete as per architectural drawings and approved pattern including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, supplying and fixing factory-made modular wooden slat acoustical wall panels of approved make and shade (e.g. Himalayan Acoustics “Wood Lot” FR Grade (2430 x 131 x 16)mm (two thousand four hundred thirty into one hundred thirty one into sixteen millimetre) or equivalent), made of medium density fibreboard (MDF) with acoustical fleece backing, designed for sound absorption of minimum NRC 0.60 (noise reduction coefficient zero point six zero) as per ISO 354 / ASTM C423 (ISO three five four/ASTM Cfour two three), each panel manufactured to fire-retardant grade (FR Grade MDF) having tongue-and-groove interlocking edges with groove spacing between 4 mm to 28 mm (four millimetre to twenty eight millimetre) for seamless alignment, of density 750–800 kg/m³ (seven hundred fifty to eight hundred kilogram per cubic metre), incorporating linear or micro-perforations on rear face backed with acoustical fleece for enhanced absorption and dust protection, fixed on wall using 15 mm (fifteen millimetre) aluminium alloy 6063-T6 profiles(six zero six three-T six profile) conforming to BS 1474:1987 (British Standard one four seven four colon nineteen eighty seven), with G.I. lock-in clips on the back of tongue and groove system, mounted on G.I. / aluminium / timber framework true to line and level, including edge trims, aluminium clips, profiles, screws, anchors, and accessories, with cut-outs for electrical, AV, lighting and fire-fighting fixtures, complete as per recommendation and direction of Engineer-in-Charge; the panels finished with low-VOC PU / melamine lacquer coating (low volatile organic compound polyurethane / melamine lacquer coating) of approved shade and texture, meeting performance parameters of NRC ≥ 0.60 (noise reduction coefficient greater than or equal to zero point six zero) ISO 354 / ASTM C423 (ISO three five four/ASTM Cfour two three), fire performance as per BS 476 (Part 6 & 7) (British Standard four seven six part six and seven),

Class 1 (class one) surface spread of flame, thermal conductivity ≤ 0.043 W/m·K (less than or equal to zero point zero four three watt per metre kelvin) as per ASTM 518:1991 (ASTM five one eight : nineteen hundred ninety one), humidity resistance 100% (one hundred percent), galvanised steel frame section (when used) 0.50 mm (zero point five zero millimetre) thick galvanised @120 g/m² (galvanised at one hundred twenty gram per square metre) on both sides, and light reflectance ≥ 85% (greater than or equal to eighty five percent) for light-coloured finish, including all materials, transportation, scaffolding, wastage, labour, finishing, edge banding, and incidentals, complete in all respects as per directions of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3 (Twenty four kilogram per cubic metre), 50mm thick, wrapped in 200 G (two hundered grams) Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing Galvanised Iron (GI) wire etcetra complete in all respect including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) thick thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3 (Forty eight kilogram per cubic metre), wrapped in 200 G (two hundered grams) Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing Galvanised Iron (GI) wire etcetra complete in all respect including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including :- (a) Structural analysis & design and preparation of building drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b)Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 6mm thick aluminium composite panel material consisting of 3mm (three millimetre) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm (zero point five millimetre) thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 (five hundered) based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 (one) and polymer (Service) coating on face # 2 (two)as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 (Six thousand five) T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, Stainless Steel 316 (three hundred sixteen) Pins and anchor bolts of approved make in Stainless Steel 316 (three hundred sixteen), Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP (Aluminium composite panel) cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with Aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of 40cm (Forty centimetre) thick Cavity wall second class common burnt clay building bricks of class designation 7.5 (seven point five) with 17cm (Seventeen centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner & outer wall laid in Cement mortar 1:4 (One cement isto four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six / eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - hundred centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of 30cm (thirty centimetre) thick Cavity wall second class common burnt clay building bricks of class designation 7.5 (seven point five) with 7cm (Seven centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner & outer wall laid in Cement mortar 1:4 (One cement isto four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2(two) Nos. (two numbers ) 6/8 ( six / eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - hundered centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of brick work using Second class commo

n burnt clay building bricks of class designation 7.5 (seven point five) in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of half brick masonary with second class common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of second class half brick masonary for shaft with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:4 (one cement: four course sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six / eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100cm (ninety to hundred centimetre) length horizontal and vertical in cavity wall and curing complete). The measurement of wall faces only one side will be considered for payment), complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of autoclaved aerated cement blocks masonry with 100mm (One hundred millimetre) thick AAC (autoclaved aerated cement) blocks in super structure above plinth level in cement mortar 1:4 (one cement isto four coarse sand) or polymer modified adhesive mortar. The rate includes providing and placing in position 2 (two)Numbers of 6 mm(six millimetre) dia M.S. bars at every third course of masonry work complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of autoclaved aerated cement blocks masonry with 150mm/ 230mm/300mm (One hundered fifty millimetre/ two hundered thirty millimetre/ three hundered millimetre) thick AAC (autoclaved aerated cement) blocks in super structure above plinth level with RCC band (2(two) Numbers of 6 mm(six millimetre) dia M.S. bars at every third course) at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of random rubble masonry with hard stone in foundation, plinth, retaining or returning/breast walls and other similar works including levelling up with cement concrete 1:6:12 (one cement isto six coarse sand isto twelve graded stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 20mm (twenty millimetre) Barium Sulphate plaster in cement barium mortar 1:1:2 (one Barium sulphate isto one cement isto two Barium Sulphate Sand) in backing coat and finishing coat of brick masonry/stone masonry/concrete walls for interior plastering upto all floor level including arrises,internal rounded angles, chamfers and / or rounded angles and finished even and smooth (including all type design & pattern) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement isto three sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in two coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto three sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80(eighty)mm in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) above plinth level to all floor level complete as per architectural drawi

ngs including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 12mm (twelve millimetre) thick and 100mm (One hundred millimetre) wide plain cement mortar bands in cement mortar 1:4 (one cement isto four fine sand) surface of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering of 15mm Cement plaster in cement mortar 1:5 (one cement isto five sand) on surface of brick/ concrete/ stone walls including forming groove of uniform size from 12x12 mm (twelve into twelve millimetre) and upto 25x15 mm (twenty five into fifteen millimetre) in the top layer of plastered surface as per approved design & pattern having 230mm c/c (two hundered thirty millimetre centre to centre) horizontally equal wideness and finishing of groove complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying 20mm (Twenty millimetre) thick Pattern in cement Plaster with cement Mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300mmx300mm (Three hundred into Three hundred millimetres) high-density, factory-manufactured, lead-free anti-radiation or Radiation shielidig tiles of (Johnson Endura Radiation Shielding Tiles or equivalent), with thickness of 12mm (Tweleve millimetres), with using high-density, non-toxic, non-reactive, radiation shielding materials (typically feldspar, zirconium silicate, barium sulphate or similar), designed to attenuate (Comparable to 1mm (one millimetre) to 2mm (two millimetre) sheet lead thickness) X-rays/gamma rays as per room workload and layout, conforming to Atomic Energy Regulatory Board (AERB) or BIS/IS standards. Tiles shall be installed with interlocking/lapping joints for better grip and overlapping to prevent radiation streaming, fixed on prepared surfaces with poluurethane conductive adhesive grout, with joints properly sealed and made flush, include surface preparation, making all cutouts for electrical/medical service penetrations, grouting, cleaning, and testing for radiation leakage as instructed, finished smooth, complete in all respects in accordance with radiation physicist's requirements & instructions etcetra including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300 x 300 (Three hundred into Three hundred millimetres) with 10mm (Ten millimetre) thickness of Radiation shielding wall tiles, having high-density, non-toxic, non-reactive, radiation shielding materials (typically feldspar, zirconium silicate, barium sulphate or similar), designed to attenuate (Comparable to 1–2(one to two) mm sheet lead thickness) X-rays/gamma rays as per room workload and layout, conforming to Atomic Energy Regulatory Board (AERB) or BIS/IS standards. fixing of tiles up to ceiling height (or as per AERB layout), with poluurethane conductive adhesive grout, with joints properly sealed and making all cutouts for electrical/medical service penetrations, grouting, cleaning, and testing for radiation leakage as instructed, finished smooth, complete in all respects in accordance with radiation physicist's requirements & instructions etcetra including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 600 x 600mm (Six hundred into six hundred millimetres) x 10mm (Ten millimetre) thick antistatic vitrified tiles having antistatic-conductive, abrasion resistant, hard wearing and levelled floor in ASC blue colour suitable for the specified use laid on the existing floor with proper application process. The antistatic conductive rectified vitrified tile with all punched corners of make H & R johnson india/ orient/ rak/ kajaria/ nitco. The tile surface should have electrical resistance - conductive less than 1 (One) mega ohm with static decay time less than 0.5 (Zero Point five) seconds and area of each tile should be 0.36sqm (Zero Point three six per square metre). The tiles should be fixed using poluurethane conductive tile adhesive, suitable to fix antistatic vitrified in minimum 6(six)mm (Six millimetre) thick bed and by leaving a space of minimum 5(five)mm around each tile with the help of + (plus) shaped PVC spacer suitable to leave U shaped groove of 5(five)mm (Five millimetre) around all four sides of each tile. After, curing of minimum 24 (twenty four) hours, prapare a grid of 18 (Eighteen) gauge anilated pure copper wire around all four sides of antistatic conductive endura tiles complete the work in all respects including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600 x 600mm (Six hundred into six hundred millimetres) x 10mm (Ten millimetre) thick anti static wall tiles laid with chemical compound in predescribed proportion & as per standards and manufacture specifications. of make H & R johnson india/ orient/ rak/ kajaria/ nitco. The tile surface should have electrical resistance - conductive less than 1 (One) mega ohm with static decay time less than 0.5 (Zero Point five) seconds and area of each tile should be 0.36sqm (zero point three six per square millimetre). The tiles should be fixed using poluurethane conductive tile adhesive, suitable to fix antistatic vitrified in wall and making U shaped groove of

5(five)mm (Five millimetre) around all four sides of each tile. After, curing of minimum 24 (twenty four) hours, prapare a grid of 18 (Eighteen) gauge anilated pure copper wire around all four sides of antistatic conductive endura tiles complete the work in all respects including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 600 x1200mm (Six hundred into Twelve hundred millimetres) with 10-12mm (ten to twelve millimetre) thickness of full body antiskid & high quality germfree vitrified floor tile of Nitco /Kajaria / Simpolo /Johnson or its equivalent with combination of 30cm (thirty centimetre) wide dark shade border, having water absorption less than 0.5% (Zero point five percent) and conforming to IS : 15622, laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 600 x1200mm (Six hundred into Twelve hundred millimetres) with 10-12mm (ten to twelve millimetre) thickness of full body antiskid & high quality germfree vitrified wall tile of Nitco /Kajaria / Simpolo /Johnson or its equivalent with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 600 x 1200mm (Six hundred into twelve hundred millimetres) with 10-12mm (ten to twelve millimetre)thickness full body/ full body anti skid Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 600 x 1200mm (Six hundred into twelve hundred millimetres) with 10-12mm (ten to twelve millimetre) thickness full body/ full body anti skid Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 400 x 400mm (Four hundred into Four hundred millimetres) with 10mm (ten millimetre) thickness of first quality antiskid full body vitrified floor tiles of Nitco /Kajaria / Simpolo /Johnson / Somany conforming to IS : 15622 of approved shade and design, laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing (400 x 400) mm (Four hundred into Four hundred millimetres) with 10mm (ten millimetre) thickness of first quality antiskid full body vitrified wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 300x300mm (Three hundred into Three hundred millimetres) with 10mm (ten millimetre) thickness of full body/ full body anti skid/ Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300x300mm (Three hundred into Three hundred millimetres) with 10mm (ten millimetre) thickness of full body/ full body anti skid Vitrified tiles first quality antiskid vitrified wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes impo

sed by the Government.

Providing and laying 600x600 mm (Six hundred into Six hundred millimetre) with 10mm (ten millimetre) thick first quality acid and alkali resistant tiles of Kajaria / NITCO / Somany / Simpolo/ Johnson and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 600x600 mm (Six hundred into Six hundred millimetre) with 10mm (ten millimetre) thick first quality acid and alkali resistant wall tiles of Kajaria / NITCO / Somany / Simpolo/ Johnson conforming to IS: 15622 , in all colours, shades except burgundy, bottle green, black in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram Per square metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300 x 600mm (Three hundred into Six hundred millimetres) with 10mm (ten millimetre) germfree first quality glazed wall tiles, conforming to IS: 15622 , of approved make Nitco /Kajaria / Simpolo /Johnson / Somany in all colours, shades as approved by Engineer In Charge, in skirting, risers of steps and dados, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metre,(at the rate three point three kilogram per square metre), including pointing in white cement mixed with pigment of matching shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300 x 600mm (Three hundred into Six hundred millimetres) with 10mm (ten millimetre) first quality glazed wall tiles, conforming to IS: 15622 , of approved make Nitco /Kajaria / Simpolo /Johnson / Somany in all colours, shades as approved by Engineer In Charge, in skirting, risers of steps and dados, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metre,(at the rate three point three kilogram per square metre), including pointing in white cement mixed with pigment of matching shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm (Fifty five into Fifty five centimetre) of uniform colour with 15cm (Fifteen centimetre) wide Jaisalmer Yellow marble band of same shade that of flooring of approved shade as per detail slab flooring over 20-25 mm (twenty to twenty five millimetre) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 550x550x25mm (five hundred fifty into five hundred fifty into Twenty five millimetre) thick Kota stone single piece slab in treads of steps with uniform nosing / edging laid over 20-25mm (Twenty to twenty five millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 2mm (two millimetre) thick vinyl tile flooring of approved colour of L.G HAUSYS or its equivalent with polurethane conductive adhesive, colored, curbed or mosaic/ metalled finish laid with approved adhesive on sub-floor complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 2mm (two millimetre) thick seamless antistatic/ anti radiation/ anti dissipative homogenous vip conductive esd control vinyl tile flooring of size 600 x 600 mm (six hundred into six hundred millimetre) of approved colour of L.G. HAUSYS or its equivalent with polurethane conductive adhesive. the joints of the tile floor shall be given u shaped groove with grooving machine to insert welding bars. the tile joints shall be welded by heat fusion process to get seamless floor. the projected welding bars shall be trimmed with the crescent shaped knife and attached sledge so that it would flush with flooring. the edge of the skirting shall be sealed with sealant of approved make. copper grounding strips 0.5mm (point five millimetre) thick & 25mm (twenty five mllimetre) wide shall be laid on the floor below in the adhesive in the border and crossed junction and connected to copper wiring of grounding. the tile flooring should have an electrical resistance of 2.5 x 10 (two point five into ten) to 2.5 x 10 (two point five into ten) Ohms as per DIN 51953, stmf 150 or NePa 99 B1 class of fire ressistance and should meet UL standard 779* standard for electrically conductive flooring. colored, curbed or mosaic/ metalled finish laid with approved adhesive on sub-floor complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) thick Sadar Ali / Red lakha Granite in combination with 15cm (fifteen centimetre) wide black granite band and patterns, in flooring or linear as well as curvilinear portions of the building all complete as per the architectural drawings over 20 mm (Twenty millimetre) thick

base cement mortar 1:4 (One cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera apto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 20 mm (twenty millimetre) thick Sadar Ali / Red lakha / black granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) thick Sadar Ali / Red lakha / black of required shade Granite stone in combination 80% (eighty percent) polished and 20% (twenty percent) unpolished slab with 50mm (fifty millimetre) wide flaming band near uniform double round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) thick Sadar Ali / Red lakha / black / grey in risers of steps, skirting dado and pillars laid on with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isyo three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (forty centimetre) wide 20 mm (twenty millimetre) thick marble stone strip moulding above panneling work/ tile work/ other similar work, including machine polishing to edge to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing & fixing in position 12mm (twelve millimetre) thick HDF (High Density Fibreboard) flooring with planks consists a melamine film coating one side and aluminium oxide coated tissue on another side of plank (Armstrong/Action Tesa/Century Ply or its equivalent), issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Kilogram/Cubic metres, over prepared surface with necessary quarter round planks of size 1900mm x 18mm (nineteen hundered into eighteen millimetre) and door reducer of size 1900mm x 44mm (nineteen hundred into forty four millimetre) , wherever required. The wood planks shall have minimum density of 1000 Kg/cum (One thousand kilogram per cubic metre) & minimum Hardness 1000 Kgf (One thousand Kilogram force). with Eco friendly UV coating, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing & fixing in position 12mm (twelve millimetre) thick HDF (High Density Fibreboard) in wall skirting with planks of sizes (Armstrong/Action Tesa/Century Ply or its equivalent), 1900mm (nineteen hundred millimetre) length and 85mm (eighty five millimetre) wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded poly ethylene foam sheets having 40Kilogram/Cubic metres density over prepared surface. The bomboo wood planks shall have minimum density of 1000 kg/cum (One thousand kilogram per cubic metre) & minimum Hardness 1000 Kgf (One thousand Kilogram force). with Eco friendly UV coating, all as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing at all height wall panelling with 12mm (twelve millimetre) water proof/termite resistant teak ply conforming to IS:13958-1994 including fixing to frame work made of 50mm x 50mm (fifty millimetre into fifty millimetre) on 600mm (six hundered millimetre) centre to centre with hard wood frame including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing first class teak wood moulded cornice 55 x 30mm (fifty five into thirty milimetre) and 25x12 mm (twenty five into twelve millimetre) beading of triangular shape to the junction of panelling etcetera with iron screws all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 200x1200 mm (two hundred into twelve hundred milliemtre) wall panelling with prelaminated wooden planks conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm (fifty millimetre into fifty millimetre) hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etcetra with iron screws all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 50 mm (Fifty millimetres) thick cement concrete flooring 1:2:4 (One cement isto two sand into four graded stone aggregate 20mm (Twenty millimetres) nominal size) laid in one layer finished with a floating coat of neat cement complete including carriage of mat

erial within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 300x300x25 mm (Three hundred into three hundred into twenty five millimetres) Labrador Design (Rainbow Series) floor tiles of NTC / Unistone / Atlantic in flooring in ramp for person with disability on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 (One cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 450x450mm (Four hundred fifty into Four hundred fifty millimetre) with 15mm (fifteen millimetre) thickness of exterior grade anti skid vitrified floor tile of Kajaria /Johnson or its equivalent in all colours and shades, conforming to IS : 15622, in ramp area or other similar works, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 300x300mm (Three hundred into Three hundred millimetre) with 12mm (Twelve millimetre) thickness exterior grade tactile tile (for vision impaired persons as per standards) of having water absorption less than 0.5% (Zero point five percent) of Kajaria /Johnson or its equivalent in all colours and shades, in outdoor floors such as footpath, court yard, multimodals location, ramp area or other similar locations, conforming to IS : 15622, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Heat Resistant Terrace Tiles 300mmx300mmx20mm (Three hundred millimetre into Three hundred millimetre) into (Twenty millimetre) thick with SRI (solar refractive index) > 78 (Sevety Eight) , solar reflection > 0.70 (Zero point Seventy) and initial emittance>0.75 (Zero point Seventy Five) on waterproof and sloped surface of terrace, on 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1 (one cement isto one course sand) , including rubbing and polishing of the surface upto 3 (Three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) thick machine cut Gwalior stone work for wall in dado, skirting, risers of steps etcetera, in required design and pattern wherever required, stones of different finished surface texture, on 15 mm (fifteen millimetre) thick cement adhesive 1:1 (one cement isto one adhesive) laid & screwed in position and jointed with white cement slurry @ 3.3 Per Kilogram/Per Square Metre (at the rate three point three kilogram per square metre) including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 12.5mm (twelve point five millimetre) thick Unistone / NTC / Atlantic stone cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 20mm (twenty millimtere) thick teraacotta pressed clay tiles (as per approved pattern of approved size) approved make of taylor or its equivalent on roofs jointed with cement mortar 1:4 (One cement isto four coarse sand) mixed with 2 (two) integral waterproofing compound, laid over a bed of 20mm (twenty millimtere) thick cement mortar 1:4 (One cement isto four coarse sand) and finished neat complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 760 x 760mm (Seven Hundred Sixty into Seven Hundred Sixty) with 50mm (fifty millimetre) thickness of precast factory made glass reinforced concrete Jali panels of approve size. Pattern, design, thickness and colour of NTC make or its equivalnent. the panels should be make from 53 (fifty three) grade of white Portland cement manufactured by "JK cement" or its equivalent Quartz, Fine Silica, Sand, alkali resistant Glass fiber manufactured by 'Ownes corning' or its equivalent, Super Plasticizers manufactured by 'BASF' or its equivalent Polymers manufactured by 'BASF'or its equivalent and UV resistant synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or its equivalent.The material casting should take place in FRP Mould.The fixing of Screen should be 'DRy fixing' such that to be done with stainless steel (SS-304) 'L' shaped brackets, fasteners and pins complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and painting wall (two or more coats) with Premium emulsion paint with silicon additives having Alkali & fungal resista

nce, dirt resistance exterior paint of Asian / Dulux /Berger paints/Nerolac paints) for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Finishing walls with Anti bacterial & dirt (dust) resistance washable emulsion having VOC less than 50 gm/litre (Fifty grams per litre) and UV resistance as per IS 15489:2004, exterior paint of Asian / Dulux /Berger paints/Nerolac paints with silicon additives, on new work with Two or more coats applied @ 1.43 litre/ 10 sqm (One point four three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90litre/10sqm (Zero decimal Nine Zero litre per ten square metre) including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and painting two coats wall painting with Plastic emulsion paint of Asian / Dulux /Berger paints/Nerolac paints) for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and painting two coats with silicon & acrylic emulsion of Asian / Dulux /Berger paints/Nerolac paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and painting (two or more coats) with acrylic washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying distempering with oil bound washable distemper of Nerolac/ Asian Paints to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer Priming coat with distemper primer complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and painting walls with weather proof exterior emulsion of Nerolac/Asian or its equivalent of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 Square metre (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 Square metre (Zero point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing & finishing surface with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer's specifications including preparation of surface, etcetera complete as per approved brand (Berger Shalimar, Asian paints, ICI Nerolac) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and painting with oil type wood preservative of (Berger Shalimar, Asian paints, ICI Nerolac) for new wood work by applying two or more coats, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming of Burger, Shalimar, Asian paints, ICI Nerolac complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Damp Proof Course 50mm (fifty millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded/crushed stone aggregate) 20mm (Twenty millimetre nominal size) and curing complete, as required at site inclu

ding carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade-Ten) of approved quality using 1.7 Kilogram/Square metre (One point seven kilogram per square metre) on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 (four point four) Kilogram/Square metre mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (One cement isto three coarse sand) mixedwith water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 (one point seven) Kilogram.per Square metre of area. iv) IVth course of 400 (four hundered) micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100mm (one hundered millimetre) wide and pasted to Each other with bitumen @ 1.7 (one point seven) Kilogram/Square metre. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Dr. Fixit Torch Shield (P-3160-3mm), APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm (three millimetre) thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Per Square Metre (at the rate zero point fourty litre per square metre) by the same membrane manufactured of density at 25°C, 0.87 - 0.89 Per Kilogram/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etcetera, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm (five centimetre) . Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D -5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply and installing SBS (Styrene Butadiene Styrene) membrane a self adhesive cold applied flixible 1.5mm (One point five millimetre) thick proofing mambrane comprising of self adhesive bitumen compound laminated on to an impervious non perforated cross laminated HDPE Filf/Voitron film applied on the external surface of retaining wall pot construction and after de-shuttering done etcera including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and installing water proofing treatment of raft slab / stitch slab by using 1.02mm (One point zero two millimetre) thick fully bounded HDPE (High Density Polyethene) material. The fully bonded HDPE (High Density Polyethene) membrane looses laid on the Plain cement concrete before casting of the Reinforced cement concrete raft slab /stich slab/footings etcetra and comprises of an aggressive pressure sensitive water proof adhesive and a weather proof protection layer the pre fabricated meberane gets bounded to the underneath of the poured concrete used as rat slab / stitch slab fully bounded HDPE (High Density Polyethene) memberane system shall confirm to basement water proofing protection to grade 2.3 (two point three) as defined in BS 8102:2009 etcera including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 450gsm (four hundred fifty gram per square millimetre) HDPE (High Density Polyethene) dimpled memberane 0.80mm (Zero point eight zero millimetre) thick as a protection layer for SBS (Styrene Butadiene Styrene) memberane against backfilling soil including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and treatment of soil under proposed floors in proportion of dilute compound by using 1.0 (one) litre water @ 2.5 (two point five) millilitre chemical emulsion (Imidacloerid 30.5%(thirty point five percent) SC and using diluted compound @ one litre per hole, 300 mm (three hundred millimetre) and laying of PVC pipes condiuts of approved make (Termi Pores/ Irrigate Pores) apart including drilling 12 mm (twelve millimetre) diameter holes and plugging with cement mortar 1:2 (one cement isto two Coarse sand) to match the floor: The laying of material shall be got done through the authorised applicator of the manufacturer of material including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick HDMR Board shutters for cup boards including fixing with Stainless steel 304 (three zero four) grade hinges with screws etcetera and finished with 25x6mm (twenty five into six millimetre) hard wood lipping / edging complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (fifteen millimetre) thick Commercial board waterproof termite resistant proof shutters for cup boards and finishing the edges with 19x6mm (fifteen millimetre into six millimetre) hardwood beading including fixing with SS piano hinges with screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof termite resistant commercial board in shelves/box for cup board

with butt joints & fixing with nails & screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing water proof 8 mm (eight millimetre) thick of standard quality ISI mark and approved shade and colour in panelling & wall linning including mitring at junctions, butt jointing and nails complete including frame work of 50x50mm (fifty into fifty millimetre) hard wood grid frame work at 600 mm C/C (six hundered millimetre centre to centre) of paneling, complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1.00mm (one millimetre) thick colored & decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1st (first) class deodar wood plain square edged cover fillets (beading) 50mmx25mm (fifty millimetre into twenty five millimetre) section, with wood screws in ceiling and lining including mitring at junction including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum U beading 2.5mm (two point five millimetre) thick of required size to Pre-laminated/ flush door shutter, including fixing etcetera wherever necessary complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) diameter stainless steel curtain rods of wall thickness 1.25 mm (one point two five millimetre) with two brass brackets fixed with brass screws and wooden plugs etcetera wherever necessary complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing stainless steel raised signage or Logo, as "STATE CANCER INSTITUTE" or "OPD BLOCK" or other similar words in captal letters or "Himachal Pradesh Government" or other similar type of logos, on facade, fabricated from stainless steel Grade 316 (three hundered sixteen) sheet conforming to IS 5522, minimum 20G (≈1.0 mm) for flat letters and 1.0–1.2mm (One millimetre to One point two millimetre) thick sheet formed skins for raised/box letters / logos having minimum 50mm (fifty millimetre) depth or otherwise as per height proportion of the letters, complete. Letters/logos shall be Water jet / CNC / laser cut to approved font / artwork from approved drawings, edges hemmed / formed as required, ground, buffed and polished to uniform finish; finish shall be brushed or mirror, or exterior-grade PVD TiN “golden” or "metal" colour, as per specified in drawings or as per direction of Engineer-In-Charge. Fixing shall be with concealed stainless steel studs welded/bonded to letters and anchored to the substrate (stone/concrete/ACP/backing frame) using stainless steel dash fasteners or approved chemical anchors; drilling, plugging/anchoring, non-staining epoxy or sealant grouting, alignment to true line / level / plumb, and no visible face fixings. The rate includes setting out, full-size of letters mock-up per finish for approval, staging/scaffolding, protection of adjacent finishes, and making good complete as per approved drawings and as directed by the Engineer-in-Charge. (face area shall be consider for payment) The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing stainless steel signage raised or engraved Himachal Pradesh Government / foundation stone name plate /or other similar type of logos, fabricated from stainless steel Grade 316 (three hundered sixteen) sheet conforming to IS 5522, minimum 20G (≈1.0 mm) for flat letters and 1.0–1.2mm (One millimetre to One point two millimetre) thick sheet formed skins for engraved letters 15mm-20mm (fifteen to twenty millimetre) letters depth unless noted otherwise, complete. Letters/logos shall be Water jet / CNC / laser cut to approved font / artwork from approved drawings, edges hemmed / formed as required, ground, buffed and polished to uniform finish; finish shall be brushed or mirror, or exterior-grade PVD TiN “golden” or "metal" colouras per specified in drawings or as per directio

n of Engineer-In-Charge. Fixing shall be with concealed stainless steel screws or anchored to the substrate (stone/concrete/ACP/backing frame) using stainless steel dash fasteners or approved chemical anchors; drilling, plugging/anchoring, non-staining epoxy or sealant grouting, alignment to true line / level / plumb, and no visible face fixings. The rate includes setting out, full-size templates, staging/scaffolding, protection of adjacent finishes, and making good complete as per approved drawings and as directed by the Engineer-in-Charge. (face area shall be consider for payment) The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch complete with all respect, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing concealed hinges for windows / Ventilators/ all other works of approved quality for 20mm (twenty millimetre) thick for door with stainless steel screws complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimetre) bright finished brass double acting spring hinges with necessary brass screws etcetera complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 125x75x4 mm (one hundred twenty five into seventy five into four millimetre) ISI marked CED coated sellf closing hinges fitting with as per required colour or shade with necessary SS 304 grade screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing steel (white power coated) crescent lock for uPVC/aluminium sliding window/ door with necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and filling the gap Upto 5mm (five millimetre) depth and 5 mm (five millimetre) width in between aluminium / uPVC frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundred into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100x16mm (one hundred into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250x16mm (two hundred fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked oxidised M.S. sliding door bolts conforming to IS:5930 with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150x16mm (One hundred fifty into sixteen millimeters) ISI marked oxidised M.S. door sliding door bolts conforming to IS:5930 with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals

. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium 200x10mm (two hundred into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium 150x10mm (One hundred fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundred into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished Chromium plated brass 100 x 65mm (one hundred into sixty five millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles & key provision / arrangement of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished cylinderical Chromium plated brass 168 x 75 mm (one hundred sixty eight into seventy five millimetre) mortice latch and lock without key provision of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished brass 100 mm (one hundred millimetre) mortice latch and lock with 6 (six) levers of approved quality with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make approved quality) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing double strip (horizontal type) 150mm (one hundred fifty millimetre) size Cup-board shutter magnetic catcher with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing powder coated telescopic drawer channels 450 mm (four hundred fifty millimetre) long with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing sliding arrangement in racks / cupboards / cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300mm (three hundered millimetre) long bright /matt finished Stainless Steel 304 (three hundred four) grade door handles of approved quality & make with necessary screws etc all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300mm (three hundred millimetre) long bright /matt finished Stainless Steel 304 Grade 22mm (twenty two millimetre) diameter H-handles of approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing bright /matt finished Stainless Steel 304 Grade 125mm (one hundred twenty five millimetre of approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other

taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium hanging floor Twin door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium hanging floor Single door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250mm (two hundred fifty millimetres) nominal size aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) nominal size aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 Per Kilogram (one hundred twenty five kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 Per Kilogram to 80 Per Kilogram (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (seven hundred one millimetre to one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of expansion joint, floor Joint of 40 mm (forty millimetre) gap, system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures complete, (Material shall confirm to ASTM 6063). including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing sheet covering over expansion joints with iron screws as per design, Aluminium fluted strips 3.15 mm (three point one five millimetre) thick, 150 mm (one hundered fifty millimetre) wide including carri

age of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) diametre on wall face PVC rain water pipes of working pressure 4/6 Per Kilogram/cm2 (Four/six kilograms/per centimeters square) ISI marked of Finolex / Vectus including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) nominal bore/diameter Plain bend ISI marked of Finolex / Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) diametre Shoe on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogram/per centimetres square) ISI marked of Finolex / /Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) diametre PVC clamps ISI marked of Finolex / Vectus approved design to PVC rain water pipe including cost of cutting holes and steel screws, rawal plug and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters of with vertical channels 20x10x2mm (twenty into ten into two millimetre) and braced with flat iron diagonals 20x5mm (twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6mm (forty into forty into six millimetre), with 40mm (forty millimetre) diametre steel pulleys, complete with bolts,nuts, locking arrangement, stoppers, handles, including applying apriming coat of approved steel primer including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

WATER SUPPLY & SANITARY INSTALLATION

Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter High pressure PVC Spigot and Socket, waste and ventilating pipe 4.00 to 4.6 mm (Four point zero zero to four point six millimetre) thick of ISI marked of Finolex / Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter High pressure PVC Spigot and Socket, waste and ventilating pipe 4.00 to 4.6 mm (Four point zero zero to four point six millimetre) thick of ISI marked of Finolex / Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter High pressure PVC Spigot and Socket, waste and ventilating pipe 4.00 to 4.6 mm (Four point zero zero to four point six millimetre) thick of ISI marked of Finolex / Vectus including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetres) diametre Plain bend on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogram/per centimetres square) ISI marked of Finolex / Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter Plain bend ISI marked of Finolex / Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C door bend with oval access door, of Finolex / Vectus insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110x90mm (One hundred ten into ninety millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110x75mm (One hundred ten into seventy five millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Vectus complete upto all floor level complete as per archi

tectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C clamps of Finolex / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C cowl of Finolex / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 90mm (Ninety millimetre) nominal bore/diameter P.V.C cowl of Finolex / Vectus ISI marked for waste and ventilating pipes including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C cowl of Finolex / Vectus ISI marked for waste and ventilating pipes including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 (four point five zero)Per Kilogram and frame to be not less than 2.70 Per Kilogram (two point seven zero kilogram)as per standard design: 100x100 mm (one hundred into one hundred millimetre) size P type, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five). complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china waterless urinal of size 600x330x315mm (Six hundered into three hundered thirty into three hundered fifteen millimetre) as per model no. B2050106 having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. with C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, of approved make Hindware/ Cera/ Jaguar Star white/ Snowhite including painting of fittings and cutting and making good the walls and floors wherever required:Range of three half stall urinals with 10 (ten) litre P.V.C. automatic flushing cistern. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300 x 320 x 720mm (Three hundred into three hundred twenty into Seven Hundred twenty millimetre) vitreous china division plate for urinals of Hindware/cera/Jaquar of star white / snow white shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 370x665x750mm, (three hundred seventy into six hundred sixty five into seven hundred fifty millimetre) floor mounted, white vitreous china single piece (WC) water closet as per model no. CNS-WHT-853S220SPPSM , double traps syphonic of approved brand/make of (Jaguar,Cera), shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the S trap 220 mm (two hundred twenty millimetre), complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing rectangular Shape 355x645x745mm, (three hundred fifty five into six hundred forty five into seven hundred forty five millimetre) floor mounted, white vitreous china single piece (WC) water closet as per model no. 92658 of Hindware or Cera or its equivalent, double traps syphonic of shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the S trap 220 mm (two hundred twenty millimetre), complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing water closet squatting pan Cat no. 20042 with size of (580x440x300)mm (five hundred eighty into four hundred forty into three hundred millimetre) (Indian type W.C. pan ) with integral type foot rests of Hindware/ Cera/ Jaguar Star white/ Snowhite with 100 mm (one hundred millimetre) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and flo

ors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal type/wash down floor mounted Matrix water closet (WC) for specially abled person Cat no. 7011 with size of (740x550x835)mm (Seven hundred forty into five hundred fifty into Eight hundred thirty five millimetre) with supporting arrangement, white colour studio set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement, SEAT COVER, Flushing CISTERN 10ltr. (ten litre) capacity and twin flushing valves etc. complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) (with cistern, seat cover and flush fitting) of approved make (Hindware/ Cera/ Jaguar Star white/ Snowhite), complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Health faucet ABS with rubbit cleaning system, flexible tube upto 1.25 mtr (one point two five metre) long PVC Flexible tube & ABS wall hook to extended wall mounted type W.C. of quality and make Kingston / Gem / Parko / JAL, ESS / Jaquar / Seiko complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 550x400x225mm (Five hundred fifty into four hundred into two hundred twenty five millimetre), half pedestal type wash basin having 510mm (five hundred ten millimetre) height from floor level of Hindware/ Cera/ Jaquar as per details with 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 520x450x200mm (Five hundred twenty into four hundred fifty into two hundred millimetre), counter type wash basin of Hindware/ Cera/ Jaquar as per details with 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 660x460x200mm (Six hundred sixty into four hundred sixty into two hundred millimetre), counter type Surgeon type wash basin of Hindware/ Cera/ Jaquar as per details with 15mm (fifteen millimetre) nominal bore C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing (450x300)mm (Four hundred fifty into three hundred millimetre), as per model no. 7207 matrix wash basin of Hindware/ Cera/ Jaquar as per details with 15mm (fifteen millimetre) nominal bore C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 1040x510x250 mm (One thousand forty into five hundred ten into two hundred fifty millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 535x455x200 mm (five hundred thirty five into four hundred fifty five into two hundred millimetre) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450x200 mm (six hundred into four hundred fifty into two hundered millimetre) white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm (forty millimetre) C.P brass waste and 40mm (forty millimetre) C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore, C.P. brass sensor based tap (RESF-103, AC+DC) model no. 8934, of Jal / ESS or its equivalent low voltage alarm Shock Resistant Anti-interference Auto cutt off, Battery life cycle:3000 cycles sensing distance: 0-6 inches, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar / Hindon series of Jal / ESS (superior or heavy type) approved quality conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass bib tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite & Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engi

neer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass 98 mm (ninety eight millimetre) long push cock of approved quality and colour of Jaquar / Hindware / Cera / Kerovite & Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen millimeters) nominal bore, C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms(six hundred ninety gramms) Jaquar / Hindware / Cera / Kerovite & Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) diametre C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 Jaquar / Hindware / Cera / Kerovite & Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex / Relpipe (Reliance )/Vectus for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing C. P. Brass overhead shower rose with 15mm or 20mm (Fifteen millimeters or twenty millimetre) inlet 100mm (one hundred millimetre) with single flow and shower arm of Jaquar / Hindware / Cera / Kerovite & Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) nominal size gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) diametre C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, Jaquar / Hindware / Cera / Kerovite & Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1216 (16mm (sixteen millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1620 (20mm (Twenty millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1500x750mm (one thousand five hundred into seven hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) for public toilet complete with 6 mm (Six millimetres) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixin

g 600x120x5 mm (Six hundred into one hundred twenty into five millimetre) glass shelf of Jaquar / Hindware / Cera / Kerovite & Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass soap Dish Holder having length of 138mm (one hundred thirty eight millimetre), breadth 102mm (one hundred two millimetre), height of 75mm (seenty five millimetre) with concealed fitting arrangements, weighing not less than 106 (one hundred six) gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing & Fixing in position Aluminium C.P glossy wall mounted 6 (six) pegs hooks rail fixed with C.P. brass screws and rawl plugs etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper Holder including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass pillar tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite & Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimetre) diametre C.P. / S.S. Jet of Jaquar / Hindware / Cera / Kerovite & Jal with flexible tube upto 1 metre (One metre) long with S.S. triangular plate to Eureopean type W.C. of approved quality and make as approved complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite & Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite & Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundr

ed fifty millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass towel rail as per model no. FS007103 of Jaquar / Hindware / Cera / Kerovite & Jal with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimetre) long towel rail with total length of 645 mm (six hundred forty five millimetre), width 78 mm(seventy eight millimetre) and effective height of 88 mm (eighty eight millimetre), weighing not less than 190 (one hundred ninety) gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass towel ring of Jaquar / Hindware / Cera / Kerovite & Jal trapezoidal shape 215 mm (two hundred fifteen millimetre) long, 200 mm (two hundred millimetre) wide with minimum distances of 37 mm (thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 (eighty eight) gms including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex / Vectus having tripple layer of IS No: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings but excluding the base support for tank complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to Forty milimetres) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One Cement isto four Sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundred fifty millimetre) internal diameters, for bedding , necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One Cement isto three Sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundered fifty millimetre) internal diameters, for hauching, necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1:2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetre) and 45cm (Forty five centimetre) deep including C.I. cover with frame (light duty) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1 :2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundred twenty into ninety centimetre) and 90cm (Ninety centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight per kilograms) (weight of cover 23 Per Kilogram (Twenty three per kilograms) and weight of frame 15 Per Kilogram (Fifteen per kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of c

lass designation 7.5(seven point five) in cement mortar 1:4 (One cement isto Four coarse sand) C.I. cover with frame (light duty) 455x610mm (Four hundered fifty five into six hundered ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) ), R.C.C. top slab with 1:1.5:3 mix (One cement isto One and Half Fine sand isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement isto Five fine sand isto ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelev millemetre) thick with cement mortar 1:3 (One cement isto Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millmetre) and 45 cm (Forty five centimetre) deep for single pipe line complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Site development

Preparation and consolidation of sub grade with power road roller of 8 to 12 (eight to twelve) tonne capacity after excavating earth and dressing to camber and consolidating with road roller including making goodthe undulations etc. and re-rolling the sub grade and disposal of surplus earth complete as per HPPWD specification, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Consolidation of sub grade with Road Roller 8-10 (eight to ten) Tonne, including making good the undulation etcetera with earth or quarry soil etcetera and rerolling the sub-grade completed as per HP.PWD specifications including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and construction of granular sub-base 150mm (one hundred fifty milimeters) compacted thickness by providing well graded materials as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel roller 80-100 (Eighty to one hundred ) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400(four hundred) for grading-I material, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm (twenty five millimetre), aggregate cement ratio not to exceed 15:1 (fifteen isto one), aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum (One hundred fifty kilogram per cubic metre), optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa (Ten Mega pascal) at 7 (seven) days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes (Eight to Ten) vibratory roller, finishing and curing complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Pavement Quality Concrete (PQC) of M-30 (M- Thirty) grade in accordance with MoRTH/IRC specifications, using approved design mix with minimum cement content of 420kg/m³ (four hundred twenty kilogram per cubic metre) and maximum water-cement ratio of 0.40 (Zero point four zero), including cost of materials, mixing, transporting, placing with paver or manually, compacting with needle and screed vibrators, finishing, curing with approved compound, provision of required jointing (including dowel bars, tie bars, formwork, joint fillers, sealants), laying over a separation membrane on prepared DLC or sub-base, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying, spreading by mechanically means and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN (eighty to one hundred Kilo Newton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and MORD Technical Specification section 400, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 50mm (fifty milimetre) thick Bituminous macadam with 40-60 (forty to sixty) TPH hot mix plant producing an average out put of 50(fifty) tonnes per hour using crushed bindeer VG-10 (vilscosity Grade-ten) at the rate 3.5% (Three point five percent) as per design mix with nano technology (Zycitherm) at the rate of 0.1% (Zero decimal one percent) by wieght of nitumen transported to site within all leads laid over a previously prepated surface with paver finisher to the required grade, level and alignment and rolld to achieve the desired compactin as per MORD technical specification section 500, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85kg (Zero point eight five kilogram ) per square metre using mechanical means as per MORT & H technical Specification 2013 Clause 502 and as per directions of Engineer- in- Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg(zero point two hundred seventy five kilogram ) per square metre on the prepared granular surface cleaned treated with primer and cleaned with hydraulic broom as per MORT&H Technical Specification 2013 Clause 503 and as per directions of Engineer- in- Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkan

a, toll tax, GST or other taxes imposed by the Government.

Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with bitumen of grade VG-30 (viscosity grade -thirty ) Made of H.P.C.L , B.P.C.L , Indian oil corporation @ 5.5% (Five point five percent) (percentage by weight of total mix) and limefiller @ 3% (three percent) (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive of octroi, royality , GST or other taxes imposed by the Government.

Providing and laying heavy duty paving in 100 x 100 x 100mm (One hundred into One hundred into One hundred millimetre) size natural (Rajasthan) cobble stone including locking the border with natural kerb stone laid over 25mm (twenty five millimetre) thickness of cement mortar 1:4 (One cement isto four coarse sand) and pointing with cement mortar 1:4 (One cement isto four coarse sand) and fill the joints with neat cement slurry mixed with pigment to match the shade of cobble stones including curing rubbing complete as per the design pattern & approved colour etcetera with carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Rubble stone flooring laid in cement mortar 1:3 (One cement isto four coarse sand), and pointing & fill the joints with cement mortar 1:3 (One cement isto three coarse sand) including curing dressing complete as per specify design pattern & approved colour etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetre) thick Kota flagged stone flooring laid in cement mortar 1:5 (One cement isto five coarse sand) and pointing with cement mortar 1:5 (One cement isto five coarse sand) and fill the joints with neat cement slurry mixed with pigment to match the shade of kota stone, and curing dressing complete as per specify design pattern & approved colour etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying at or near ground level factory made kerb stone of M-25 (M- Twenty five) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (One cement isto three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5.0mm (five point zero millimetre)), including making drainage opening wherever required complete etcetera, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5mm (Two point five millimetre) thick including reflectorising glass beads @ 250 gms per sqm (at the rate Two hundred fifty Grams per square millimetre) area, thickness of 2.5mm (Two point five millimetre) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of Aluminium studs 100 x 100 mm (One hundred into One hundred millimetre) fitted with lense reflectors / raised pavement markers (cat’s eye/road stud), as per specifications conforming to MoRTH Clause 804, made of strong, weather resistant, durable plastic (such as ABS), having highly reflective reflectorized lenses, fixed with epoxy resin/adhesive on the road surface including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing post delineators made of ABS round body fitted with 2no.s (Two numbers) 100mm (One hundred millimetre) diameter high reflective reflectors and mounted on Mild Steel pipe of 65mm (Sixty Five millimetre) diameter duly powder coated anti-rust and anti theft steel to be installed including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 60mm (Sixty millimetre) thick faciory made cement concrete interlocking paver block of M-35 (thirty five) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 80mm (eighty millimetre) thick factory made cement concrete interlocking paver block of M-40 (forty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 110mm (one hundred ten millimetre) diametre with working pressure not less than 4.5 Per Kilogram/cm2 (four point zero five kilogram per centimetre square) ISI marked PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Retu

rn walls and retaining/breast walls extended through the full width of the structure with slope I(V) : 20(H) (One vertical isto Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of 75 x 75mm (Seventy five into Seventy five millimetre) G.I. (Galvanised Iron) wire mesh fencing with 5mm (Five millimetre) thick corresponding to SWG-6 including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of 75 x 25mm (Seventy five into Twenty five millimetre) rectangular welded steel wire fabric mesh, painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 455x610mm (Four hundred fifty five into six hundred ten millimetre) light duty rectangular cast iron manhole with frame cover weight 23Per Kilogram (Twenty three kilograms) single seal pattern complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing C.I. cover 300x300 mm (three hundred into three hundred millimetre) without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Per Kilogram (four point five kilogram) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing S.F.R.C heavy duty manhole cover Circular shape 560mm (five hundred sixty millimetre) diametre precast R.C.C. manhole cover with frame - H.D. - 20 (twenty) within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Provision for water lifting pump 1.00 HP (One point zero zero horse power) including all necessary fittings complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25 mm (twenty five millimetre) diametre fire hydrent inculuding all necessary fiting compelete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing cenralised filter for fire fighting tank inculuding all necessary fiting compelete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Electrical Installations

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm (one point five square millimetre) Group - C, FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC Conduit ISI marked , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. (one point five square millimetre) FRLS PVC insulated copper conductor single core cable etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make of switches :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius).Make of wire.:- KEI, Finolex, Polycab . Make of conduit :- Diplast/BEC/AKG as approved by Engineer-in-Charge

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm (one point five sq. millimetre) FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit heavy duty ISI marked, and earthing the point with 1.5 sq. (one point five sq. millimetre) FRLS PVC insulated copper conductor single core cable etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make of switches :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius).Make of wire.:- KEI, Finolex, Polycab . Make of conduit :- Diplast/BEC/AKG as approved by Engineer-in-Charge

Wiring for twin control light point with 1.5 sq.mm (one point five square millimetre) Group - C, FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC Conduit having , 2 way (two way) modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. (one point five square millimetre) FRLS PVC insulated copper conductor single core cable etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make of switches :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius).Make of wire.:- KEI, Finolex, Polycab . Make of conduit :- Diplast/BEC/AKG as approved by Engineer-in-Charge

Supplying and fixing following rating Modular switch /socket on the existing switch box / cover plate including connections but excluding modular plate etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Legrand(Myrius)/L&T(entice)/Anchor (Roma Clasic ) as approved by Engineer-in -charge .

S.P. 5/6 Amps (five by six amperes) one way Modular switch. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

S.P. 15/16 Amps (fifteen by sixteen amperes), one way modular switch. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

5 pin (five pin), 5/6 Amps (five by six amperes Modular socket outlet. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

6 pin (six pin) 15/16 Amps (fifteen by sixteen amperes) modular socket outlet. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Telephone Socket. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin (three pin) 5/6 Amps (five by six amperes) modular socket outlet and 5/6 Amps (five by six amperes), modular switch, connections etc. as required.including

five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Legrand(Myrius)/L&T(entice) /Anchor (Roma classic ) as approved by Engineer-in -charge .

Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin (six pin) 5/6 Amps (five by six amperes) & 15/16 Amps (fifteen by sixteen ampere) modular socket outlet and 15/16 Amps (fifteen by sixteen amperes), modular switch, connections etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Legrand(Myrius)/ L&T(entice)/Anchor (Roma classic ) as approved by Engineer-in -charge .

Supplying and fixing Computer board comprising 3 nos (three nos) 5 amp (five ampere) modular switches & Sockets , G.I box 2 module (two module) for jack box and G.I Box 12 module (twelve module) for 5 amp (five ampere) switchs and 5 amp (five ampere) sockets comprising frame and cover plate for each 2 module (two module) metal box and 12 module (twelve module) metal box , one no computer jack (RJ-45 (forty five))with shutter including connections etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Legrand(Myrius)/L&T(entice)/Anchor (Roma classic ) as approved by Engineer-in -charge .

Supplying and fixing suitable size GI box with modular plate and cover 12 module (twelve module) in front on surface or in recess, including providing and fixing 6 pin (six pin) 5/6 (five by six) & 15/16 Amps (fifteen by sixteen ampere) 1 No (one no) , 3pin (three pin) 5/6 Amps (five by six ampere) modular socket outlet 3 No (three no) and 15/16 Amps (fifteen by sixteen ampere) module switch 1 No (one no)&5 /6 Amps (five /six Amperes) modular switch 3 No (three no.), connection etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:-Legrand(Myrius)/ L&T(entice)/Anchor (Roma classic ) as approved by Engineer-in -charge .

Supplying and fixing RJ 45 JACK (forty five JACK) including connections but excluding modular plate etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- Legrand(Myrius)/L&T(entice)/Anchor (Roma classic ) as approved by Engineer-in -charge .

Supplying and fixing of 2 Module (75mmX75mm) (two Module (seventy five millimetre into seventy five millimetre)) ,G.I box alongwith modular base & cover for modular switches in recess etc.as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:-Legrand(Myrius)/ L&T(entice)/Anchor (Roma classic ) as approved by Engineer-in -charge .

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Legrand(Myrius)/ L&T(entice)/Anchor (Roma classic ) as approved by Engineer-in -charge .

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit ISI markedas required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- KEI/Anchor/Polycab/Finolex as approved by Engineer -in -charge .

2 X1.5 sq. mm (two into one point five square millimetre) + 1 X 1.5 sq.mm (one into one point five square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

2 x2.5 sq.mm (two into two point five square millimetre).+ 1X2.5 sq.mm (one into two point five square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

2 x 4 Sq. mm (two into four square millimetre).+ 1X4 sq.mm (one into four square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

2 X6 sq. mm (two into six square millimetre) + 1 X 6 sq. mm (one into six square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

2x10 sq.mm(two into ten square millimetre)+ 1X6 sq.mm (one into six square millimetre) earth wire.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

2 x 16 Sq. mm (two into sixteen square millimetre)+ 1X6 sq.mm (one into six square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

4 x 6 Sq. mm (four into six square millimetre).+ 2X6 sq.mm (two into six square millimetre) earth wire.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

4 x10 Sq. mm (four into ten square millimetre).+ 2X6 sq.mm (two into six square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

4 x 16 Sq.mm (four into sixteen square millimetre).+ 2X6 sq.mm (two into six square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

4 x25 Sq. mm (four into twenty five square millimetre).+ 2X6 sq.mm (two into six square millimetre) earth wire. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and drawing following size of FRLS PVC insulated copper conductor single core cable in existing surface / recessed, Steel/medium class PVC conduit as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- KEI/Anchor/Polycab/Finolex as approved by Engineer -in -charge.

3x1.5Sq. mm (three into one point five square millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

3x2.5Sq. mm (three into two point five square millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

3x4.0Sq. mm (three into four point zero square millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing of following sizes of PVC conduit Heavy duty ISI marked along with accessories insurface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.including five year warranty all rates are inclusive of carria

ge of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Diplast/BEC/AKG as approved by Engineer-in -charge.

25 mm. (twenty five millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

40 mm. (forty millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

100 mm. (one hundred millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing Ding dong bell suitable for single phase, 230 volts (two hundred and thirty volts), complete as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Providing and fixing of IP65 (IP sixty five) Bulkhead led fixture 10 W +/- 1 W (ten watt plus/minus one watt) Wall Mounted with minimum system lumen efficacy of 100 lm/W (one hundred lumen/watt) with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 (P.F.> zero point nine five) with THD<10% (THD< ten percent) ,CRI 80 (eighty).The LED shall be tested with LM80 -08 (LM eighty to eight) standard with Useful life of 50000 Hrs (fifty thousand hours) at L70 (L seventy) .The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K (five thousand seven hundred Kelvin) only with CRI of minimum 80 (eighty).The Input voltage range shall be 140V (one hundred and forty volt) to 280V (two hundred and eighty volt), 50/60 Hz (fifty by sixty Hertz) complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips/Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Providing, Installation, testing and commissioning of BLDC ceiling fan 1200 mm(one thousand two hundred millimtre) without socket type regulator,including wiring the down rods of standard length (up to 40 cm (forty centimetre)) with 16/0.20 mm (sixteen by zero point two zero millimetre) twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. Five star rating including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Usha (Technoaire BLDC without remote)/Bajaj/Orient/Havell's/Crompton as approved by Engineer-in-Charge

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- Anchor (Roma classic )/L&T(Entice)/Legrand(Myrius) as approved by Engineer-in-Charge.

Providing and installation exhaust fan of 300 mm (three hundred millinetre)(H.D) in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Usha (TURBO H.D. 900 RPM (nine hundred RPM) )/Bajaj/Crompton as approved by Engineer-in-Charge

Providing and installation of stationary storage type Electric water heater (Geyser)of 10 Ltrs (ten litres) by means of expansion-bolts with nuts and washers, includingembedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- Usha/Bajaj/Recold /Crompton as approved by Engineer-in-Charge .

Providing and installation of stationary storage type Electric water heater (Geyser) of 15 Ltrs (fifteen litres) by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Usha/Bajaj/Recold /Crompton as approved by Engineer-in-Charge .

Providing and installation of stationary storage type Electric water heater (Geyser) of 25 Ltrs (twenty five litres) by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Usha/Bajaj/Recold /Crompton as approved by Engineer-in-Charge .

Supply and fixing of led downlighter in 12 W+/- 1 W (twelve watt plus/minus one watt) LED Recess/surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 110 lm/W (one hundred and ten lumen/watt) and system lumen 1320lm (one thousand three hundred and twenty lumen) with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (P.F.> zero point nine five) ,THD<10% (THD< ten percent) ,CCT 5700K (five thousand seven hundred Kelvin), CRI 80 (eighty), IP20 (IP twenty) optical compartement.The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (L seventy). The Input voltage range shall be 150V (one hundred and fifty volt) to 270V (two hundred and seventy volt) .Fixture have Surge Protection 2kV (two kv) .Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips/Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Supply and fixing of led downlighter in 15 W +/- 1 W (fifteen watt plus/minus one watt) LED recess/surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 1650 lm/W (one thousand six hundred and fifty lumen/watt) and system lumen 1980lm (one thousand nine hundred and eighty lumen) with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (P.F.> zero point nine five) ,THD<10%(THD< ten percent) ,CCT 5700K (five thousand seven hundred Kelvin), CRI 80 (eighty), IP20 (IP twenty) optical compartement.The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (L seventy).. The Input voltage range shall be 150V (one hundred and fifty volt) to 270V (two hundred and seventy volt) .Fixture have Surge Protection 2kV (two kv) .Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,r

oyality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- Philips, Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Supply and fixing of led downlighter in 18 W+/- 1 W (eighteen watt plus/minus one watt) LED Recess/surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 100 lm/W (one hundred lumen/watt) and system lumen 1980lm (one thousand nine hundred and eighty lumen) with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (P.F.> zero point nine five) ,THD<10% (THD< ten percent) ,CCT 5700K (five thousand seven hundred Kelvin), CRI 80 (eighty), IP20 (IP twenty) optical compartement.The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (L seventy).. The Input voltage range shall be 150V (one hundred and fifty volt) to 270V (two hundred and seventy volt) .Fixture have Surge Protection 2kV (two kv) .Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips, Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Supply and fixing of Led fixture 600mmX600mm (six hundred millimetre into six hundred millimetre) 36 W+/- 1W (thirty six watt plus/minus one watt) Recess/Surface Mounted with HET diffuser with minimum system lumen efficacy of 120lm/W (one hundred and twenty lumen/watt) and system lumen of 4320lm (four thousand three hundred and twenty lumen) with CRCA Housing and with P.F.>0.95 (P.F.> zero point nine five),THD<10% (THD< ten percent),CCT 5700 K/4000K (five thousand seven hundred Kelvin/four thousand kelvin), internal surge protection 2.5KV (two point five kv) with input voltage range of 150V (one hundred and fifty volt)-270V (two hundred and seventy volt),CRI 80 (eighty),UGR<(twenty two). The LED shall be tested with LM80-08 (LM eighty to eight)) standard with Useful life of 50000 Hrs (fifty thousand hours) at L70 (L seventy) complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips, Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Supply and fixing of Led fixture 4Ftx1Ft (four feetxone feet) 36 W +/- 1W (thirty six watt plus/minus one watt) Recess/Surface mounted Mounted with HET plastic diffuser with CRCA powder coated housing having efficacy of 100 lm/W (one hundred lumen/watt) with P.F.>0.95 (P.F.> zero point nine five),THD<10% (THD< ten percent). The LED with useful life of 5000 hrs (five thousand hours) at L70 (L seventy). The LED used in the luminaire shall have CCT of 5000-5700K (five thousand to five thousand seven hundred Kelvin) with CRI of minimum 80 (eighty ) .The input voltage range shall be 150V (one hundred and fifty volt)-270V. (two hundred and seventy volt) Fixture have surge protection 2KV. (two kv.) Driver output voltage shall be less than SELV limits for safe operation and maintenance complete with all accessories, connections, testing and commissioning etc.as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips, Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Supply and fixing of IP40 (IP forty) Led fixture 40 W (forty watt)+/- 1W (forty watt plus/minus one watt) with Surface Mounted 4 Feet (four feet) with Polycarbonate diffuser with aluminium housing having minimum system lumen efficacy of 110 lm/W (one hundred and ten lumen watt) with minimum system lumen output 4400 lumens (four thousand four hundred lumens) with P.F.>0.95 (P.F.> zero point nine five) with THD<10% (THD< ten percent) ,CCT 5700K (five thousand seven hundred Kelvin), CRI 80 (eighty),Surge Protection 3 Kv (three kv) .The LEDs with minimum life of 75000 burning (seventy five thousand burning) hours. The Input voltage range shall be 150V (one hundred and fifty volt) to 270Vcomplete (two hundred and seventy vcomplete) with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips, Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Supply and fixing of IP20 (IP twenty) Led fixture 2FT (two FT) 10 W+/- 1W (ten watt plus/minus one watt) with Surface Mounted 2 Feet (two feet) with aluminium housing and Polycarbonate diffuser,minimum system efficacy of 100 lm/W (one hundred lumen/watt) with P.F.>0.95 (P.F.> zero point nine five) with THD<20%(THD< twenty percent) ,CCT6500K (CCT six thousand five hundred Kelvin),CRI 80 (eighty),Surge Protection 2 Kv (two kv), IP20 (IP twenty). The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (L seventy). The Input voltage range shall be 150V (one hundred and fifty volt) to 270V (two hundred and seventy volt),complete with all accessories, connections, testing and commissioning etc.as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips, Wipro/Trilux/LT as approved by Engineer-in-Charge.

Supply and fixing of IP20 (IP twenty) Smart PIR Occupancy and Daylight Sensor having 360 degree (three hundred and sixty degree) Detection Pattern with maximum dectection Diameter of 6 meters (six meters) at maximum height of 3.5 meters (three point five meters) having Power consumption of 1.8 Watt (one point eight watt) with off delay timing of 1-90 minutes (one-ninety minutes) complete with all accessories, connections, testing and commissioning etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Philips, Wipro/Trilux/LT as approved by EngineEngineer-in-Charge.

Providing and installation exhaust fan of 300mm (three hundred millimetres) (Plastic body) size in the existing opening,including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Usha/Bajaj/Crompton as approved by Engineer-in-Charge

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 o C (zero to forty degree celcius), Relative humidity 0 to 95% (zero to ninety five percent), Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 (one) modules (N denotes total number of modules required for rated capacity).The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes (thirty minutes) back up (Battery VAH capacity shall not be less than 1600 VAH (one thousand six hundred vah) per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for a

dditional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based forreliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter (3 Level (three level)) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% (ninety six percent) while operating on battery mode and delivering quality power to the 100% (one hundred percent) non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be <5% (five percent) at 50 % (fifty percent) load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging (zero point seven laging) to 0.7 leading (zero point seven leading) power factor loads. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

UPS shall be suitable for incoming supply AC : 3Phase (three phase) 400V+/-20% (four hundred volt plus/minus twenty percent), 50 Hz +/-5 Hz (fifty Hertz plus/minus five Hertz), AC Output voltage: 3Phase (three phase) 415 Volt (four hundred and fifteen volt), 50 Hz +/- 0.2Hz (fifty Hertz plus/minus zero point two Hertz), Overload capacity of 120% (one hundred and twenty percent) for 10 mins (ten mins), Sine wave output. Non condensing, noise level less than 60db (sixty decibel) at 1 meter (one meter) distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KV (ten kv) surge. UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204 (EN six thousand two hundred four), EN6204 (EN six thousand two hundred and four) Part I (one) and Part 2 (two),it shall be a Voltage and Frequency Independent (VFI)-type UPS. . Communication RS232 (RS two hundred and thirty two)/RS485 (RS four hundred and eighty five)/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge. Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accessories are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% (eighty percent) of the load, Noise Level 65 DB (sixty five decibel) at 1 meter (one meter) distance. The system shall be in compliance IEC 62040 (sixty two thousand and forty)- 1,2 & 3, IS: 16242 (one, two & three, IS: sixteen thousand, two hundred and forty two) and CPWD Specification. Display Panel(minimum) (In-build 5 inch (five inch) or more LC Display / LED) to display : a) Input: Voltage,current,Frequency. b) Bypass: Voltage, Frequency. c)Output: Voltage, frequency, Current. d) Battery:Voltage, Capacity. e) Load: KVA, KW, Percentage.f) Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000 events (three thousand events) like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) StatisticalData: No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm,UPS Overload, Fault, Shutdown, Input Over, UnderVoltage, Output Over, Under Voltage, Battery Over,Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc with Quaterly one number service during five year including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- APC/Legrand-Numeric/Emerson-Vertiv/ETON as approved by Engineer-in-charge.

60KVA (sixty KVA) (Each Power module shall be < 10 KVA (ten kva)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and erection of following rating, 10 KA (ten KA) breaking capacity, 240/415 (two hundred and forty by four hundred and fifteen volts), 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

5 amp (five ampere) to 32 amp (thirty two ampere) single pole. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

25 Amp (twenty five ampere) to 63 amp (sixty three ampere) Triple pole & neutral. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and erection of MCB DP 40/50/63 amps (forty/ fifty / sixty three) rating, 10 KA (ten KA) breaking capacity, 240 volts (two hundred and forty volts), 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Double pole. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing following rating, 10 KA (ten KA) 240/415 (two hundred and forty by four hundred and fifteen volts), residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers (three hundred miliampers) in the existing MCB DB complete with connections, testing and commissioning etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

40 Amps. (forty amperes) Single pole & Neutral. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

63 Amps. (sixty three amperes) Single pole & Neutral. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

40 Amps. (forty amperes) Triple pole & Neutral. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

63 Amps. (sixty three amperes) Trinple pole & Neutral. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts (two hundred and forty volts), on surface / recess, complete with tinned copper bus- bar, neutral bus bar, earth bar, din-bar, interconnections, and powder p

ainted, including earthing etc. as required. ( but without MCB/RCCB/Isolator) including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Double door-4 way (four way). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Double door-8 way (eight way). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Double door-12 way (twelve way). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Double door-16 way (sixteen way). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing of Segregated tripple pole and neutral 8 way (eight way), sheet steel MCB distribution board 415 Volt (four hundred and fifteen volt) on surface /recess with provision to mount MCCB as incomer with provision of up to 125 amp (one hundred and twenty five ampere) insulated phase bus bar /neutral bar with shroud/s /earth bar sticking saddles cement spill protector /colour coded interconnected wire set /cable ties/blanking plate and circuit indentification labels and DP MCB/RCCB sub-incomer in each phase and SP MCBs as out going , Powder painted including earthing etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- L&T/Legrand, Hager,ABB s approved by Engineer-in charge.

Supplying and fixing of Segregated tripple pole and neutral 12 way (twelve way), sheet steel MCB distribution board 415 Volt (four hundred and fifteen volt) on surface /recess with provision to mount MCCB as incomer with provision of up to 125 amp (one hundred and twenty five ampere) insulated phase bus bar /neutral bar with shroud/s /earth bar sticking saddles cement spill protector /colour coded interconnected wire set /cable ties/blanking plate and circuit indentification labels .and DP MCB/RCCB sub-incomer in each phase and SP MCBs as out going , Powder painted including earthing etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- L&T/Legrand, Hager,ABB as approved by Engineer-in charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm (five centimetre) variation, made from 1.6 mm (one point six millimetre) thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 (one:two:four) cement concrete plat-form of suitable dimensions 15 cm (fifteen centimetre) high from ground level and 45 cm (forty five centimetre) thick. The cubical pedestal shall be 15 cm (fifteen centimetre) from the top of cement concrete plat-form.The panel should be approved /tested from the CPRI Lab & should confirmed to IEC-61439 (Part-I&II) (IEC- six one four three nine (Part-one & two))including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble as approved by Engineer-in -charge.

300 mm (three hundred millimetre) deep (nominal). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

450 mm (four hundred and fifty millimetre) deep (nominal). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

1000 mm (one thousand millimetre) deep (nominal). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing copper strip bus-bars suitable for following size & cross sectional area 415 volts (four hundred and fifteen volts) capacity 4 Nos. (four nos.) each in the existing enclosure with all accessories including connections etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Copper Bus Bar 63 Amp (sixty three amperes) (20.4x3.17mm) (twenty point four into three point one seven millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Copper Bus Bar 100 Amp (one hundred ampere) (25.4mmx3.17mm) (twenty five point four millimetre into three point one seven millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Copper Bus Bar 200 Amp (two hundred ampere) (25.4mmx4.75mm) (twenty five point four millimetre into four point seven five millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Copper Bus Bar 400 Amp (four hundred ampere) (38.10mmx6.35mm) (thirty eight point one zero into six point three five millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Copper Bus Bar 800 Amp (eight hundred ampere) (50.80mmx9.50mm) (fifty point eight zero into nine point five zero millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing aluminium strip bus-bars suitable for following current rating 415 volts (four hundred and fifteen volts) capacity 4 No. (four no.) each strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1 Amp. ( (one millimetreinto onemillimetre=one ampere) Aluminium shall be Electric Grade E-91 Busbar (ninety one busbar) supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.in the existing enclosure with all accessories including connections etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Aluminium Bus Bar 300 Amp (three hundred ampere). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Aluminium Bus Bar 400 Amp (four hundred ampere). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Aluminium Bus Bar 800 Amp (eight hundred ampere). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Aluminium Bus Bar 1200 Amp (one thousand two hundred ampere). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Aluminium Bus Bar 1600 Amp (one thousand six hundred ampere). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Aluminium Bus Bar 2000 Amp (two thousand ampere). The rates are inclusive of octroi, ro

yality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing 4 pole (four pole) MCCB 63 Amp (sixty three ampere) Ics = 100% (one hundred percent) icu, 25KA (twenty five ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with thermal magnet in release and terminal spreaders in existing cubical panel complete with connection ,testing and commissioning etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Supplying and fixing 4 pole (four pole) MCCB 100 Amp (one hundred ampere) Ics = 100% (one hundred percent) icu, 25KA (twenty five ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with thermal magnet in release and terminal spreaders in existing cubical panel complete with connection, testing and commissioning etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Supplying and fixing 4 pole (four pole) MCCB 125 Amp (one hundred and twenty five ampere) Ics = 100% (one hundred percent) icu, 25KA (twenty five ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with thermal magnet in release and terminal spreaders in existing cubical panel complete with connection, testing and commissioning etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Supplying and fixing 4 pole (four pole) MCCB 200 Amp (two hundred ampere) Ics = 100% (one hundred percent) icu, 25KA (twenty five ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with thermal magnet in release and terminal spreaders in existing cubical panel complete with connection, testing and commissioning etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Supplying and fixing 4 pole (four pole) MCCB 250 Amp (two hundred and fifty ampere) Ics = 100% (one hundred percent) icu, 36KA (thirty six ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with thermal magnet in release and terminal spreaders in existing cubical panel complete with connection, testing and commissioning etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Supplying and fixing 4 pole (four pole) MCCB 320 Amp (three hundred and twenty ampere) Ics = 100% (one hundred percent) icu, 36KA (thirty six ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with thermal magnet in release and terminal spreaders in existing cubical panel complete with connection, testing and commissioning etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Supplying and fixing 4 pole (four pole) MCCB 400 Amp (four hundred ampere) Ics = 100% (one hundred percent) icu, 36KA (thirty six ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with thermal magnet in release and terminal spreaders in existing cubical panel complete with connection, testing and commissioning etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T/Legrand/Hager/ABB as approved by Engineer-in -charge.

Supplying and fixing 4 pole (four pole) MCCB 630 AMP (six hundred and thirty ampere) Amp Ics = 100% (one hundred percent) icu, 50 KA (fifty ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with Microprocessor release Mtx2.0 (Mtx two point zero) & ITRP3 (ITRP three) conforms to IS/IEC 60947-2 (six zero nine four seven-two) and terminal spreaders in existing cubical pane complete with connection ,testing and commissioning etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T Cat. No. (CM930080000X1 (nine three zero zero eight zero zero zero zero into one)), Legrand, Hager, ABB as approved by Engineer-in -charge.

Supplying and fixing Surge protection device protection against indirect/direct lighting surges maxiumum dicharge current- I max upto 100 KA/3 poles (one hundred ka/ three poles)+neutral Type 1+2 . (two plus two) including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make :L&T(AUSP 123PN100 (one two three PN one hundred),Legrand ,Hager, ABB as approved by Engineer-in -charge.

Supplying and fixing CT coil 400/5 Amp. (four hundred by five ampere) with burden of VA 15 (fifteen) accuracy class -1 including (one including) five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Automatic Electric Ltd/ L&T/Legrand/ABB as approved by Engineer-in -charge.

S/F Rubber mat 1x2 (one into two) meter long 12mm (twelve millimetre) thick infront of main panel as required including carriage of material with in all leads and lift.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

S/F Shock treatment chart on the existing wall etc as required including carriage of material within all leads and lift. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Supply and fixing of exhaust fan louver shutter for 300/380mm (three hundred / three hundred and eighty millimetre) exhaust fan on the existing wall 12 mm (twelve millimetre) thick ply board,painting for suitable size of exhaust fan hole complete in

all respect as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Supplying and fixing of DLP 105x50 (one hundred and five into fifty) mmPVC adaptable trunking on the exiting wall at required height from lower level for power connection, light connection and net working connection including partition chip flexible cover end cap.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Legrand ,MK as approved by Engineer-in -charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts (one thousand one hundred volts) grade confirms to relevent IS specifications on surface including appropriate size lugs & gland etc. of the required size. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- KEI, Polycab/ Finolex/ Havell's as approved by EngineEngineer-in-Charge.

Armoured cable 25 sq. mm(twenty five square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 35 sq. mm(thirty five square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 50 sq. mm(fifty square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 70 sq. mm(seventy square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 95 sq. mm(ninety five square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 120 sq.mm (one hundred and twenty square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 185 sq. mm(one hundred and eighty five square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 240 sq.mm (two hundred and forty square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 300 sq.mm (three hundred square millimetre) (3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Earthing with copper earth plate 600 mmX 600 mmX 3 mm (six hundred millimetre into six hundred millimetre into three millimetre) thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter (two point seven meter) long etc. with charcoal/ coke and salt as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Providing and fixing of lightning conductor made of 20 mm (twenty millimetre) outer dia. 1. (one .) mtr long copper tube, having single prong at top, with 85 mm (eighty five millimetre) dia 3 mm (three millimetre) thick copper base plate including holes etc. complete as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Providing and fixing 20mmx 3mm (twenty millimetre into three millimetre) copper strip on surface or in recess for earth connections etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Providing and fixing 25 mmx 5 mm (twenty five millimetre into five millimetre) copper strip on surface or in recess for earth connections etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Providing and fixing 4 mm (four millimetre) dia. copper wire on surface or in recess for loop earthing as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Supplying and installing following size of perforated hot dipped G.I cable trays (Galvanisation thickness not less than 50 microns (fifty microns)) with perforation not more than 17.5% (seventeen point five percent), in convenient sectons joined with connectors, suspended from the ceiling with G.I. suspenders including G.I bolts & nuts,etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

150 mm width X 50 mm depth X 1.6 mm thickness (one hundred and fifty millimetre width into fifty millimetre depth into one point six millimetre thickness). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

300 mm width X 50 mm depth X 1.6 mm thickness (three hundred millimetre width into fifty millimetre depth into one point six millimetre thickness). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

DIGITAL DISPLAY

SITC of Digital nurse station with LED numeric 7 seg (seven seg) display indication (up-to 3 characters (three characters)), buzzer etc as per specifications. Bright red color numeric's, sweet ding dong sound on call press. Display has the provision of displaying multiple call request at the same time. Panel/console source by 230V (two hundred and thirty volt) including five year warranty petty purchase to complete the job as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

20 user (twenty user) display. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

15 user (fifteen user) display. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

10 user (ten user) display. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

SMPS. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

CALLING UNIT

SITC of Patient Station Modules (Bedside) wired Call Unit, wall or Bedhead panel mounted, with call button, cancel, LED lamp for status indicator with red color LED lamp. B

ed unit supports Cat6 (Cat six) or 2 pair (two pair) wire including five year warranty petty purchase to complete the job as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Rauland/ Notifier/ Ametek/ Afcon/SCHRACK/ Eurotronikas per approved by Engineer-in -charge .

SITC of Handheld remote with spiral cord attached to bed side with 2.5 mtr (two point five metres) coil cord stranded copper conductor PVC cable, comprising of call button and red LED indicator (OPTIONAL) including five year warranty petty purchase to complete the job as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble..Make:-Rauland/ Notifier/ Ametek/ Afcon/SCHRACK/ Eurotronikas per approved by Engineer-in -charge .

Supply, Installation, Testing and Commissioning of Solar High mast system 9Mtr (nine metre) long hot dip galvanised (min.65 micron (sixty five micron)) 20 sided (twenty sided) polygonal structure having bottom A/F dia 410 mm (four hundred and ten square millimetre), top A/F dia 150 mm (one hundred and fifty millimetre) of 3 mm (three millimetre) thick in single section suitable for basic wind speed 180km/hr (one hundred and eighty kilometre) complete with head frame luminiaries carriage suitable to install 6 nos (six nos) lumininaries, solar panels&batteries on the top of the high mast lighting system having 6 solar (six solar) lights x 60 watt (sixty watt) each with MPPT Controller 12V (twelve volt) DC- 6 Nos (six nos), Solar Module 170Wp (one hundred and seventy wp) BIS approved - 6 Nos (six nos), LFP Battery 90 AH (ninety ampere hour) 12.8V (twelve point eight volt) BIS Approved-6Nos (with min.indivisual cell capacity 15 AH (fifteen ampere hour) at 3.2 VX6 (VX six) nos in a suitable weather resistant enclosures, material S 355 grade (three hundred and fifty five grade) as per BS-EN10025 (EN ten thousand twenty five) and for galvanization as per BS EN ISO1461 (ISO one thousand four hundred and sixty one) min. 65 micron (sixty five micron), charging time is 4-5 hours. (four to five hours.) The 9Mtr (nine mtr) Polygonal high mast with 20 sided (twenty sided) with all accessories, with Manual Pulley system- 1No (one no), locking arrangement and SS wire rope of suitable size. The LED should be SMD high power LED of Nichia/ CREE/ Osram/ Phitips/ LG/Samsung /Refond/ EverlighU Seoul/ Bridgelux with min. 130 lm/w (one hundred and thirty lumen watt), CCT5500 (CCT five thousand five hundred)-6500K (six thousand five hundred Kelvin),CRI min.70 (seven 0), aluminium housing witth back box for charge controller with inbuilt LED driver power coated mettallic with mounting clamp, all harware in SS. The high mast should have a designed life of 25 years. (twenty five years.) The diameter of base plate 580mm (five hundred and eighty millimetre)&thickness of 20mm (twenty millimetre), lightning protection finial one mtr, foundation bolts 6 nos (six nos), dia 25mm (twenty five millimetre),lenght of bolts 1000mm (one thousand millimetre) i/c nuts with washers,RCC foundation min 1.5 mtr (one point five mtr) deep(single column of 900mmx900mmx1500mm (nine hundred millimetre into nine hundred millimetre into one thousand five hundred millimetre) suitable for mounting of pole on a pedestal of 1.0 mtr (one point zero metres) height above ground level, decorative pedestal 900mmx900mmx1500mm (nine hundred millimetre into nine hundred millimetre into one thousand five hundred millimetre) i/c sand, filter, cement,shuttering etc. all leads and lifts as required complete in all respect with solar high mast i.e. solar PV module&flood light should be warranty for a period of five years and on battery for ten years at site replacement from the date of installation. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Navaid/SUNROVER/EXEGI as per approved by E-in-charge.

Supplying and erection of high hot dip Galvanized octagonal pole class 'A' quality of 7 Meter (seven meter) long having nominal dia. 130 mm (one hundred and thirty millimetre) bottom A/F and nominal dia. 70 mm (seventy millimetre) top A/F made up of 3.0 mm (three point zero millimetre) thickness HR sheet a/w base plate of size 200x200 (two hundred into two hundred)x12 mm (twelve millimetre) thickness,The pole has a sevic slab window at the bottom profile comprising 4-way (four way) 25 Amp (twenty five ampere) connector terminal and a MCB 10 amp (ten ampere) etc. The pole to be mounted on a 1:3:6 cement (six cement) concrete base (pedestal) of 450mmx450mm (four hundred and fifty millimetre into four hundred and fifty millimetre) and 300 mm (three hundred millimetre) including 4 Nos M 234X750 MM J-Type EN 8 (four numbers M two hundred and thirty four into seven hundred and fifty millimetre J-Type EN eight) grade foundation bolts with nuts, templates and i/c G.I.bracket single 1.5 mtr (one point five metres) long as required. Foundation RCC 1:2:4(one:two:four) shall be of size 450x450mm (four hundred and fifty millimetres into four hundred and fifty millimetre) and depth 900 mm (nine hundred millimetre) c/c ,connection,testing and commissioning as required complete in all respects. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:-Bajaj(octagonal)/SURYA/Twinkle/Kaselec/Volmount as per best satisfaction on Engineer-in -charge .

Supplying and fixing street light LED 100 watt (one hundred watt) with G.I bracket die cast Aluminium housing with frame and toughened glass, pipe mounting 5700k (five thousand seven hundred Kelvin), with Five YEAR WARRANTY ) and it should be compatible with specification e.i. Power Factor > .9(point nine), Harmonic Distortion<10% (ten percent) and efficacy >100 Lumens (one hundred lumens) per watt, suitable for input voltage: AC 220 (two hundred and twenty two )-240 V (two hundred and forty volt), 50/60 (fifty by sixty Hertz), The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (L seventy).complete with all accessories, connections, testing and commissioning etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:-Wipro (cat no -LR02-112-XXX-57-G2 (L R zero two - one one two -X X X- fifty seven G two))/Philips/Crompton as approved by EngineEngineer-in-Charge.

MAIN LT CUM DG SYNCHRONIZATION PANEL

Design, fabrication, supply, installation, testing and commissioning of fully type tested assembly extendable panel as per IEC 61439 (six one four three nine) and as per OEM specification having internal arc compliance of minimum 75kA (seventy five KA) for 0.5 sec (zero point five sec), the enclosure protection shall not be less than IP43 (IP forty three), aluminium busbar with the busbars shall be of double deck arrangement for interleaved / non-interleaved design as per OEM. Note: All incoming and outgoing switchgear shall have multifunction meter with RS 485 communication (four hundred and eighty five communication) port with LCD backlite display, indication lamps. Panel shall have LED light fixture with diffuser and fire suppression system with cylinder located besides the panel. Transient voltage and surge suppression shall be provided. The panel shall be compatible with BMS system .The panel shoud be CPRI approved. Specification, terms and conditions of the tender documents has to considered while quoting rate. Not

hing extra shall be payable. i) including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble size 1200 mm (one thousand two hundred millimetre) deep (nominal)

TRANSFORMER INCOMER I & II

DG # INCOMER I& II

Supplying and fixing 4 pole (four pole) EDO Type ACB 2000 AMP (two thousand ampere) , breaking capacity 50 kA (fifty KA) with inbuilt short circuit,over current and earth fault protection with adjustable setting as per specifications, & comprising of Controller for parallel genset operation (similar to InteliGen 200(two Hundred) of CompAp or equal) 3 Nos.(three Nos.) Cast resin CTs Of ratio 2000/5 amp (two thousand by five amperes) CL:1(one) ( For Metering),5P20 (five P20)( for protection ) 15 VA (fifteen VA) , R-Y-B indication Lamp Trip Circuit Healty and Breaker ON-OFF - Trip Indication Lamp , ,Over Voltage relay And Under Voltage relay with time delay, , 1 no (one no) reverse power relay,Underpower Relay with Timer - 1 Set (one set), Phase Sequence Relay - 1 Set (one set), Multi Function meter having 30 Days (thirty days) Memory , Trip Circuit Supervision Relay ,Master Trip Relay,Shunt trip coil 1 set (one set) , 240 V (two hundred and forty volt) AC under voltage release. - 1 Set (one set), Surge protection device,Breaker control switch (TNC),Auxiliary contacts required for necessary interlocking of breakers.( 6 No + 6 NC ) (six No plus six NC),Annunciation with test and reset for fault indication,Engine cranking relay- 1 Set (one set) , Microprocessor based engine control automatic failure stand by relay including all accessories, Three indicating lamps “load on set’, ‘Load on Mains’ and “ Set fail to start’,One 16 amp (sixteen ampere) automatic Battery charger with inbuilt facility of trickle / boost & consisting of , (1) DC Ammeter (0-30) Amp. (2) DC Voltmeter (0-30) Volt. (3) Charger ON, OFF (one DC Ammeter (zero to thirty) ampere, two DC Voltmeter (zero to thirty) volt, three Charger ON, OFF) indications ,DG start / Stop push buttons (Illuminated Type), Emergency Stop Push Button, confirm to IS/IEC 60947-2 (six zero nine four seven-two) and IEC 60947-2 ( six zero nine four seven-two) as required, complete in all rspect. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T , Legrand, Hager, ABB as approved by Engineer-in -charge. (five year warranty)

Solar incomer

Supplying and fixing 4 pole (four pole) MCCB 320 AMP (three hundred and twenty ampere) Amp Ics = 100% (one hundred percent) icu, 50 KA (fifty ka) & @ 415 volts (four hundred and fifteen volts), 50 Hz (fifty Hertz) with Microprocessor release Mtx1.0 & ITRP3 (Mtx one point zero and ITRP three) conforms to IS/IEC 60947-2 (six zero nine four seven-two) including spreader link complete with connection ,testing a

nd commissioning etc as required. Make:- L&T , Legrand, Hager, ABB as approved by Engineer-in -charge. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

BUS COUPLER

Supplying and fixing aluminium strip bus-bars suitable for following current rating 415 volts (four hundred and fifteen volts) capacity 4 No. (four no.) each strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm (one mm into one mm)=1 Amp. (one ampere)) Aluminium shall be Electric Grade E-91 Busbar (ninety one busbar) supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.in the existing enclosure with all accessories including connections etc. as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

Aluminium Bus Bar 4000 Amp (four thousand ampere). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Outgoing section I & II

Supplying and fixing PLC shall be with HMI All incoming and outgoing breakers shall be electrically/ mechanically interlocked through a Load Sharing cum Synchronization PLC comprising suitable nos. digital inputs (24 VDC (twenty four vdc)) and output (Relay) for auto operation of DGs as per load requireme

nt 1 KVA (one kva) UPS with 30 mon (thirty mon) back 50kA (fifty ka) fault level continuous Earth Bus shall be part of Panel for full length of panel Colour coding for DG Incomer ,Transformer Incomer & Bus coupler shall be done 1 set (one set) of 32 amp (thirty two ampere) 4P (four p) MCB with wiring upto compartment of D.C.U.'s along with 1 mm (one millimetre) sq wire for all RS-485 communication (four hundred eighty five ) port of KWH meter to D.C.U.'s compartment. including Self-Actuated 2 nos (two nos) 2 Kg (two kilogram) In-Panel Tube Based Fire Suppression and shall be compatible with BMS system .etc as complete in all respect .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T,Legrand, Hager, ABB as approved by Engineer-in -charge.

800 KVAR (eight hundred kvar) CAPACITOR PANEL

Supplying and fixing Microprocessor based 16 Step (sixteen step) APFC controller shall continuously monitor all three phases and displays various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232C (two hundred and thirty two c) port. It shall have data logging for minimum 2 months (two months), it shall provide output for minimum 14 stages.etc (fourteen stages.etc) as complete in all respect .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T, Legrand, Hager, ABB as approved by Engineer-in-Charge

Capacitor Bank as per following: (All MCCBs ( 36 kA (thirty six ka)) shall be thermal Magnetic type )

100 KVAR (one hundred kvar) UNIT

50 KVAR (fifty kvar) UNIT

25 KVAR (twenty five kvar) UNIT

15 KVAR (fifteen kvar) UNIT

10 KVAR (ten kvar) UNIT

Networking

Supply, Installation, Testing and Commissioning of Core Switch 24-port 1G/10G SFP+, 4-port 40G/100G QSFP28 Ports (twenty four-port 1G/10G SFP+, four-port 40G/100G QSFP28 Ports). Non-Blocking architecture. 1.280 Tbps Switching Capacity (one point two eight zero terabit per second Switching Capacity), & forwarding rate 952 Mpps (nine hundred and fifty two million packets per second), for higher switching functionality. MAC Address Table up to 32K entries or more (thirty two thousand entries or more). Min 4K static VLAN groups & Min 4K VIDs (minimum four thousand static VLAN groups and minimum four thousand VIDs). Packet Buffer Memory 4 MB (four megabyte). STP/MSTP/RSTP & ERPS for less than 50 Millisecond convergence (less than fifty millisecond convergence) (G.8032 v1/v2) (G point eight zero three two version one/version two). Protocol Root Guard & Loop Guard. IEEE 802.3ad Link Aggregation with LACP. 802.1p Quality of Service with 8 queues per port (eight queues per port). Port Mirroring, Flow Mirroring, RSPAN mirroring, L2 protocol tunneling, Loopback Detection (LBD). Support IPv4 8K & IPv6 4K Routes (support IPv4 eight thousand routes and IPv6 four thousand routes). IPv6: PBR, Static Routing, OSPFv3, RIPv1/v2, BFD, BGPv4, IPv6 ND. IEEE 802.1ab LLDP & LLDP-MED. Hardware-based forwarding for IPv4 & IPv6. DHCP-Snooping, Dynamic ARP Inspection & IP Source Guard. VRRP for IPv4 & IPv6. IGMPv1/v2/v3 for Layer-3 Multicast; L3 multicasting features IGMP, MLD, PIM-DM, PIM-SM. MAC & 802.1X based login must be available; 802.1X NAP. MAC address-based lockdown & limited learning; L2/L3/L4 IP-based, source port, destination por

t, MAC based, time based. AAA using RADIUS must be available; identity-driven policy (VLAN/ACL/QoS) assignment. 802.3ah, 802.1ag CFM & Y.1731 OAM. Ingress & egress ACL; time-based ACL. Queue handling with Strict Priority Queue, WRR, WRED, WFQ, SPQ, DRR. QoS based on 802.1p priority queues, MAC address, IP address, DSCP, VLAN, TCP/UDP port. SNMP v2c & v3, & RMONv1 & RMONv2. Management (on HTTPS) through NMS or full featured CLI; TELNET access. VXLAN, 802.1AX Link Aggregation, & 4K VLAN (four thousand VLAN). NetFlow/IPFIX/sFlow for flow exports. Operating temperature: 0°C to 45°C (zero degree Celsius to forty five degree Celsius) & Relative Humidity: 10% to 95% (ten percent to ninety five percent). IEC-60950 / CSA-60950 / EN-60950 / UL-60950 standard for safety requirements of information technology equipment (I E C six zero nine five zero / C S A six zero nine five zero / E N six zero nine five zero / U L six zero nine five zero). EMI Certificates FCC / VCCI / CE & Safety Certifications cUL / UL. IEC 62368-1:2018, EN IEC 62368-1:2020/A11, EN 55032:2015 + A1:2020, EN 55035:2017. Industrial cyber security capability (like IEC-62443-4-1:2018 or equivalent Indian certificate). OEM/Product must be on Trusted Telecom Portal of Department of Telecommunications, Government of India. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable.

Supply, Installation, Testing and Commissioning of Layer 2 (two)Switches: 24 Ports 10/100/1000 Mbps PoE + 4 Ports 10G SFP+ Smart Managed Switch, 370W from day1 (twenty four Ports ten/one hundred/one thousand megabits per second PoE plus four Ports ten gigabit SFP plus Smart Managed Switch, three hundred and seventy watt from day one), Support 802.3af/at (Support IEEE eight zero two point three af/at), Switching Capacity 128 Gbps (one hundred and twenty eight gigabits per second), MAC Address Table 16K (sixteen thousand), Packet Forwarding Rate 95.24 Mpps (ninety five point two four million packets per second), Flash Memory 64 MB (sixty four megabyte), DRAM Size 256 MB DDR3 (two hundred and fifty six megabyte DDR three), IGMP v1/v2/v3 Snooping & MLD Snooping v1/v2 (IGMP version one/version two/version three Snooping and MLD Snooping version one/version two), 802.3x Flow Control (IEEE eight zero two point three x Flow Control), HOL Blocking Prevention, LLDP/LLDP-MED, 802.1D, 802.1W, 802.1s, 802.1Q, 802.1p QoS, SPQ, WRR, WDRR, Bandwidth Control, Static Routing, IPv6 Neighbor Discovery (ND), ACL Max. 768 rules shared by IPv4, MAC, & IPv6 (ACL maximum seven hundred and sixty eight rules shared by IPv4, MAC, and IPv6), Traffic Segmentation, ARP Spoofing Prevention, ARP Inspection, DHCP Snooping, MAC Authentication, SSH v2, TLS v1.2, DoS Attack Prevention, 802.1X Port-based Access Control, Port Security, RADIUS/TACACS+, MD5 Authentication, GUI, Full CLI, Telnet Server, TFTP Client, MDI/MDIX, SNMP v1/v2c/v3. Internal/External 6 kV Surge Protection on all RJ-45 Access Ports (six kilovolt surge protection on all RJ-45 access ports). Operating Temperature -5 to 50 °C (minus five to fifty degree Celsius), Storage Temperature -20 to 70 °C (minus twenty to seventy degree Celsius), Operating Humidity 0% to 95% relative humidity (zero percent to ninety five percent relative humidity). Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, two thousand seventeen), ISO 27001 (I S O two seven zero zero one), IEC-62443-4-1:2018 or Equivalent (I E C six two four four three dash four dash one colon two zero one eight or Equivalent). OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Juniper / D-Link / Cisco / Arista.

Supply, Installation, Testing and Commissioning of Layer 2(two) Switches: 24x 10/100/1000BASE-T Interface (twenty four into ten/one hundred/one thousand BASE-T Interface) (inbuilt 6kV surge protection (six kilovolt surge protection)), 4x 10G SFP+ Uplink (four into ten gigabit SFP plus Uplink), switching capacity 128 Gbps (one hundred and twenty eight gigabits per second), packet forwarding rates 95.24 Mpps (ninety five point two four million packets per second), MAC Address Table 16K (sixteen thousand), RAM/DRAM:- 256 MB (two hundred and fifty six megabyte) & Flash/SSD : 64 MB (sixty four megabyte), IGMP v1/v2/v3 Snooping & MLD Snooping v1/v2 (IGMP version one/version two/version three Snooping and MLD Snooping version one/version two), 802.3x Flow Control (IEEE eight zero two point three x Flow Control), HOL Blocking Prevention, LLDP/LLDP-MED, 802.1D, 802.1W, 802.1s, 802.1Q, 802.1p QoS, SPQ, WRR, WDRR, Bandwidth Control, Static Routing, IPv6 ND, ACL Max. 768 rules shared by IPv4, MAC, & IPv6 (ACL maximum seven hundred and sixty eight rules shared by IPv4, MAC, and IPv6), Traffic Segmentation, ARP Spoofing Prevention, ARP Inspection, DHCP Snooping, MAC Authentication, SSH v2, TLS v1.2, DoS Attack Prevention, 802.1X Port-based Access Control, Port Security, RADIUS/TACACS+, MD5 Authentication, GUI, Full CLI, Telnet Server, TFTP Client, MDI/MDIX, SNMP v1/v2c/v3. Internal/External 6 kV surge protection on all RJ-45 access ports (six kilovolt surge protection on all RJ-45 access ports). Operating Temperature -5 to 50°C (minus five to fifty degree Celsius), Storage Temperature -20 to 70°C (minus twenty to seventy degree Celsius), Operating Humidity 0% to 95% relative humidity (zero percent to ninety five percent relative humidity). Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, two thousand seventeen), ISO 27001 (I S O two seven zero zero one), IEC-62443-4-1:2018 or Equivalent (I E C six two four four three dash four dash one colon two zero one eight or Equivalent). OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Juniper / D-Link / Cisco / Arista.

Supplying, Installation, Testing and Commissioning of the following capacity 8-port PoE Layer 2 Network Switch with PoE support of 130W or higher (eight-port PoE Layer two Network Switch with PoE support of one hundred and thirty watt or higher), with each copper port supporting 802.3at PoE+ (IEEE eight zero two point three at PoE plus), having non-blocking architecture with a switching capacity of minimum 20 Gbps (minimum twenty gigabits per second) and packet forwarding rate of 14 Mpps or higher (fourteen million packets per second or higher), 8K MAC Table (eight thousand MAC table). Internal dual AC power supply with operating temperature of -5 degree Celsius to +50 degree Celsius (minus five degree Celsius to plus fifty degree Celsius). Jumbo frame: 10 KB or higher (ten kilobyte or higher). IGMP Snooping, IGMP Snooping Querier and support for IGMP Snooping Fast Leave. Should create 250 or more MLD groups (two hundred and fifty or more MLD groups). MLD Snooping, Per VLAN MLD Snooping and MLD Snooping Fast Leave. STP, RSTP, MSTP, Loopback Detection, Multicast Filtering, VLAN Tagging, QoS: 8 Queue per port (eight queue per port), WRR, IPv4/IPv6 Interface: minimum 100 IPv4 static route entries (one hundred IPv4 static route entries) and minimum 50 IPv6 static route entries (fifty IPv6 static route ent

ries). 700 Access Control entries (seven hundred access control entries). SSH, SSL for IPv4 and IPv6. 802.1x, ARP Spoofing, DHCP Snooping and Server Screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (supports local/RADIUS database, port-based access control and EAP, OTP, TLS, TTLS, PEAP support). Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1/v2c/v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, two thousand seventeen), ISO 27001 (I S O two seven zero zero one), IEC-62443-4-1:2018 or Equivalent (I E C six two four four three dash four dash one colon two zero one eight or Equivalent). OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Juniper / D-Link / Cisco / Arista.

Supplying, Installation, Testing and Commissioning of the following capacity 8-port Layer 2 Network Switch (eight-port Layer two Network Switch) with non-blocking architecture having a switching capacity of minimum 20 Gbps (minimum twenty gigabits per second) and a packet forwarding rate of 14 Mpps or higher (fourteen million packets per second or higher), 8K MAC Table (eight thousand MAC table). Internal dual AC power supply with operating temperature of -5 degree Celsius to +50 degree Celsius (minus five degree Celsius to plus fifty degree Celsius). Jumbo frame: 10 KB or higher (ten kilobyte or higher). IGMP Snooping, IGMP Snooping Querier and support for IGMP Snooping Fast Leave. Should create 250 or more MLD groups (two hundred and fifty or more MLD groups). MLD Snooping, Per VLAN MLD Snooping and MLD Snooping Fast Leave. STP, RSTP, MSTP, Loopback Detection, Multicast Filtering, VLAN Tagging, QoS: 8 Queue per port (eight queue per port), WRR, IPv4/IPv6 Interface: minimum 100 IPv4 static route entries (one hundred IPv4 static route entries) and minimum 50 IPv6 static route entries (fifty IPv6 static route entries), 700 Access Control entries (seven hundred access control entries). SSH, SSL for IPv4 and IPv6. 802.1x, ARP Spoofing, DHCP Snooping and Server Screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (supports local/RADIUS database, port-based access control and EAP, OTP, TLS, TTLS, PEAP support). Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1/v2c/v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, two thousand seventeen), ISO 27001 (I S O two seven zero zero one), IEC-62443-4-1:2018 or Equivalent (I E C six two four four three dash four dash one colon two zero one eight or Equivalent). OEM/Product must be on the Trusted Telecom Portal of the Department of Telecommunication, Government of India. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Juniper / D-Link / Cisco / Arista.

Fibre Moudle - 10G supply, installations, testing and commssioning of multimode 10G SFP standard compliance IEEE-802.3ae 10GBASE -SR/LR. Distance capacity upto 10km (single mode). Hot pluggable, MSA compliant, RoHS COMPLIANT, SUPPORT 10 Gigs of speed. Duplex LC connector , wave length 1310mm (single mode) cable type single mode 9/125 um fibre (single mode). DDM (digital diagnostics monitoring ) supported operting temperture 0- 70°C, storage temperture 40-85°C . operting humidity 0-85%, storage humidity 0-95% . OEM/Product must be on trusted telecom portal of department of tele communitions , Govt. of India including petty purchase to compete the job with five years replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Juniper / D-Link / Cisco / Arista.

Supply, Installation, Testing and Commissioning of 1G SFP Transceiver single-mode 9/125 µm fiber 10 km (one G SFP Transceiver single-mode nine slash one two five micrometre fiber ten kilometre). The Transceiver should be Small Form-Pluggable (SFP) form factor and compatible with quoted switches. IEEE 802.3z 1000BASE-LX Gigabit Ethernet (I E E E eight zero two point three z one zero zero zero BASE-L X Gigabit Ethernet), SFP (Small Form Pluggable), LC Duplex, IEEE 802.3 compatible (I E E E eight zero two point three compatible), 1310 nm (one three one zero nanometre), single-mode fiber (9/125 µm) (nine slash one two five micrometre fiber). Operating Temperature: 0 to 70 °C (zero to seventy degree Celsius), Storage Temperature: -40 to 85 °C (minus four zero to eight five degree Celsius). Compliance: MSA Compliant. Switch and Fiber Modules should be from same OEM. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. Including petty purchase to complete the job with five-year replacement warranty on site . All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Juniper / D-Link / Cisco / Arista.

Supply, Installation, Testing and Commissioning of Category 6 (six) Unshielded Twisted Pair 4 pair 100W cable (four pair one hundred watt cable) shall be compliant with ANSI/TIA/EIA-568-C.2 (A N S I slash T I A slash E I A five six eight dash C point two). Cable shall extend between the work area location and its associated telecommunications closet and consist of 4 pair, 23 AWG, UTP (four pair, twenty three A W G, U T P). ETL Verified and UL Listed. Category 6(six) should operate on bandwidth up to 250 MHz (two hundred and fifty megahertz) as per standard. Four twisted pairs separated by internal X-shaped, four channel, full separator. Half shall not be accepted. Conductor 23(twenty three) AWG solid bare copper (twenty three A W G solid bare copper). Conductor insulation material: High Density Polyethylene and Sheath: FR PVC, PVC Grey – single sheath, insulation thickness 0.2 mm nominal (zero point two millimetre nominal). Pairs consist of two insulated conductors twisted together. Each meter printed with sequential length counter. Pulling Force: 11.5 Kg (eleven point five kilogram). Temperature Rating -20° to +70°C (minus twenty degree to plus seventy de

gree Celsius). Storage Temperature Rating 0° to +50°C (zero degree to plus fifty degree Celsius). Filler required, rip cord provided. Packing: Reels of 305 m length with spool (three hundred and five metre length with spool). Conductor resistance (DC) 9.38 Ohms/100 m (nine point three eight ohms per one hundred metre). Resistance unbalance 5% max (five percent maximum). Mutual capacitance 5.6 nF/100 m (five point six nanofarad per one hundred metre) max. Capacitance unbalance 330 pF/100 m (three three zero picofarad per one hundred metre) max. Nominal velocity of propagation 69% (sixty nine percent). Characteristic impedance 100 ±15% Ohms (one hundred plus/minus fifteen percent ohms). Worst case cable skew 45 ns/100 m (forty five nanosecond per one hundred metre). Generally conforming to EIA/TIA-568-C.2 and IEC/ISO 11801 (E I A slash T I A five six eight dash C point two and I E C slash I S O one one eight zero one). OEM for the cable box and all copper accessories shall be from the same OEM. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of Patch Panel 24 Port 1U Size (twenty four Port one U Size) loaded with 24 Port RJ-45 IO (twenty four Port R J forty five I O). Mounts in standard 19 inch racks (nineteen inch racks). Cable manager for improved cable management. Patch Panel suitable for Category 6(six) keystone. SPCC and Black Color. Rear support bar material SPCC and Black Color. RJ-45 jack housing PBT + Glass fiber UL94V-0 (R J forty five jack housing P B T plus glass fiber U L nine four V dash zero) and contact brackets PBT + Glass fiber UL94V-0 (contact brackets P B T plus glass fiber U L nine four V dash zero). RJ-45 contact material phosphor bronze with nickel plating and plug contact area finished with 50 micro-inches Gold plating (fifty micro-inches gold plating). Contact resistance maximum 20 milliohm (twenty milliohm maximum). Operating Temperature -10° Celsius to 60° Celsius (minus ten degree Celsius to sixty degree Celsius). Life of RJ-45 jack 750 cycles minimum @ 500 VDC (seven hundred and fifty cycles minimum at five hundred volt direct current). ETL Verified and UL Listed. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of Patch Cord 1 Mtr (one metre). TIA/EIA 568C.2 standard (T I A slash E I A five six eight C point two standard). 24 AWG, multi-strands (twenty four A W G, multi-strands). Conductor metal made from bare copper. Insulation material: High Density Polyethylene. Patch cord jacket LSZH. Conductor size: 24-26 AWG stranded bare copper (twenty four to twenty six A W G stranded bare copper). Jacket: FR-PVC. Mechanical Characteristics – Plug. Operating life: Minimum 750 insertion cycles (minimum seven hundred and fifty insertion cycles). Contact blade: Copper alloy. Contact plating: 03 Mµ” Gold (zero three microinch gold). Electrical Characteristics – Plug. Dielectric withstanding voltage: 1000 VDC or 700 VAC (one thousand volt direct current or seven hundred volt alternating current). Insulation resistance: >500 MegaOhms @ 1000V DC/min (greater than five hundred megaohms at one thousand volt direct current per minute). Operating temperature: -20° C to 75° C (minus twenty degree Celsius to seventy five degree Celsius). Clear polycarbonate for RJ-45 and clear PVC for boot material. Factory molded boot. RJ-45 standards: ISO/IEC 60603-7-4 and FCC 47 part 68 (I S O slash I E C six zero six zero three dash seven dash four and F C C four seven part six eight). UL Application: PC UL94-V-0 (P C U L nine four V dash zero). UL Listed and ETL Listed Certified. Patch cord plug gold plated. Contact blade of plug made from copper alloy. Insertion cycle 750 times (seven hundred and fifty times). Temperature range should support from 10° C to 60° C (ten degree Celsius to sixty degree Celsius). Vertical flame propagation IEC 60332-1-2 (I E C six zero three three two dash one dash two). Acid Gas Emission Test – IEC 60754-1 & 2 (I E C six zero seven five four dash one and two). Smoke Density Test – IEC 61034-2 (I E C six one zero three four dash two). Including petty purchase t

o complete the job with five year replacement warranty on site . All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of Patch Cord 1 Mtr (one metre). TIA/EIA 568C.2 standard (T I A slash E I A five six eight C point two standard). 24 AWG, multi-strands (twenty four A W G, multi-strands). Conductor metal made from bare copper. Insulation material: High Density Polyethylene. Patch cord jacket LSZH. Conductor size: 24-26 AWG stranded bare copper (twenty four to twenty six A W G stranded bare copper). Jacket: FR-PVC. Mechanical Characteristics – Plug: Operating life minimum 750 insertion cycles (minimum seven hundred and fifty insertion cycles). Contact blade: Copper alloy. Contact plating: 03 Mµ” Gold (zero three microinch gold). Electrical Characteristics – Plug: Dielectric withstanding voltage 1000 VDC or 700 VAC (one thousand volt direct current or seven hundred volt alternating current). Insulation resistance >500 MegaOhms @ 1000V DC/min (greater than five hundred megaohms at one thousand volt direct current per minute). Operating temperature -20° C to 75° C (minus twenty degree Celsius to seventy five degree Celsius). Clear polycarbonate for RJ-45 and clear PVC for boot material. Factory molded boot. RJ-45 standards: ISO/IEC 60603-7-4 and FCC 47 part 68 (I S O slash I E C six zero six zero three dash seven dash four and F C C four seven part six eight). UL Application: PC UL94-V-0 (P C U L nine four V dash zero). UL Listed and ETL Listed certified. Patch cord plug gold plated. Contact blade of plug made from copper alloy. Insertion cycle 750 times (seven hundred and fifty times). Temperature range should support from 10° C to 60° C (ten degree Celsius to sixty degree Celsius). Vertical flame propagation IEC 60332-1-2 (I E C six zero three three two dash one dash two). Acid Gas Emission Test – IEC 60754-1 & 2 (I E C six zero seven five four dash one and two). Smoke Density Test – IEC 61034-2 (I E C six one zero three four dash two). Including petty purchase to complete the job with five-year replacement warranty on site (five-year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of Cat6 (six) Information Outlet - Jack for User end. Category 6 (six) keystone jacks housing made from PC, UL 94V-2 (nine four V dash two) material. RJ45 (forty five) Jack contact material phosphor bronze with nickel plated. Finished with 50 micro-inch (fifty micro-inch) gold plated on plug contact area. IDC Housing made from PC, UL 94V-2 (nine four V dash two). Terminal material phosphor bronze with tin plated. IDC CAP and material of IDC Cap PC, UL 94V-2 (nine four V dash two). Current rating 1.5A (one point five ampere). Operating Temperature -10° Celsius to 60° Celsius (minus ten degree Celsius to sixty degree Celsius). Life of RJ45 (forty five) Jack 750 (seven hundred and fifty) cycles minimum (ISO/IEC 11801 (one one eight zero one) / IEC 60603-7-4 (six zero six zero three dash seven dash four)). Category 6 (six) Unshielded Twisted 4 (four) pair shall be ETL Verified / UL Listed. Including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope

Supply, Installation, Testing and Commissioning of Face Plate Single Keystone Jack square with Back Box for Single/Dual Cat 5e (five e) / Cat6 (six) / Cat6A (six A) square, including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of Cat 5e (five e) UTP Modular Plugs Pack of 100 (one hundred) including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of O.F. Cable 06F (zero six F) Outdoor - Armoured Unitube SM - HDPE Sheath (OS1). Fiber type 9/125 (nine slash one two five) / G.652D (G point six five two D) and refractive index should be 1.4670/1.4675 (one point four six seven zero slash one p

oint four six seven five). Standard ISO 11801 (one one eight zero one), IEC 60793-1/60794-1-2 (six zero seven nine three dash one slash six zero seven nine four dash one dash two) and ITU-T-REC G.652D (I T U dash T dash R E C G point six five two D). Testing methods in accordance with the following standard Telecordia: GR-20 Core (G R dash two zero Core), ISO 11801 (one one eight zero one). Jacket thickness 1.8 + 0.2 mm (one point eight plus zero point two millimetre). Outer diameter should be 9 ± 0.3 mm (nine plus/minus zero point three millimetre). 3000N/100mm (three thousand newton per one hundred millimetre) crush load (IEC 60794-1-2-E3) (six zero seven nine four dash one dash two dash E three). Bend radius (IEC 60794-1-2-E11 & E6) (six zero seven nine four dash one dash two dash E one one and E six) should be short term 20D (twenty D) in mm and long term 10D (ten D) in mm. Pulling tension: short term 2000N (two thousand newton), long term 1000N (one thousand newton) pulling tension (IEC 60794-1-2-E1) (six zero seven nine four dash one dash two dash E one). Mode field diameter 9.2um ±0.5 (nine point two micrometre plus/minus zero point five). Clad diameter 125um ±1.0 (one two five micrometre plus/minus one point zero). Dispersion at 1285 - 1330nm (one two eight five to one three three zero nanometre) should be <=3.5 ps/nm.km (less than or equal to three point five picosecond per nanometre per kilometre). Dispersion at 1550nm (one five five zero nanometre) should be <=18.0 ps/nm.km (less than or equal to eighteen point zero picosecond per nanometre per kilometre). PMD value <=0.2 (less than or equal to zero point two) (ps/km). Maximum attenuation at 1310nm (one three one zero nanometre) should be <=0.36 dB/km (less than or equal to zero point three six decibel per kilometre). Maximum attenuation at 1550nm (one five five zero nanometre) should be <=0.22 dB/km (less than or equal to zero point two two decibel per kilometre). Cabled cutoff wavelength should be <=1260 nm (less than or equal to one two six zero nanometre). Operating temperature should be –20°C to +60°C (minus twenty degree Celsius to plus sixty degree Celsius). All passive of the same make (Copper, Fiber and Racks) including petty purchase to complete the job with five year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of LIU 12 (twelve) Port Rack Mount - Loaded (SC) SM, 1U (one U) height, 19-inch (nineteen inch) rack mountable. Fiber optic LIU should include the LIU Box itself, Adapter Panel, Adapters and Pigtail as per requirement. Adapter panel: Cold Steel, 1.5mm (one point five millimetre) thickness. Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers. 4 (four) fiber spools built-in for 900um (nine hundred micrometre) tight buffered fiber storing. LIU shall be loaded with optical fiber pigtail – SC Type 1 Meter (one metre). Provide a field installable single mode SC pigtail to terminate fiber optic cables from cable-to-cable, cable-to-equipment and equipment-to-equipment. Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 (T I A slash E I A five six eight C point three) standards for repeatability. Buffer diameter 900um (nine hundred micrometre) tight buffer. Minimum bend radius: Install 30mm (thirty millimetre). Retention strength 20N (twenty newton). Cable: 900um (nine hundred micrometre) buffered. SM fiber pigtail, the cable type shall be HDPE/LSZH with a diameter of 3.0mm / 2.0mm (three point zero millimetre slash two point zero millimetre). Insertion Loss (Max) <0.3 dB (less than zero point three decibel) Max, Return Loss ≥50 dB (greater than or equal to fifty decibel) for UPC. Connector ferrule: Ceramic, SC Type, Simplex Type. Cable color Yellow. Repeatability <0.2 dB (less than zero point

two decibel) 200 (two hundred) times mating cycle. Working Temperature -10°C to +70°C (minus ten degree Celsius to plus seventy degree Celsius), Storage Temperature -20°C to +70°C (minus twenty degree Celsius to plus seventy degree Celsius). All Passive of the same make (Copper, Fiber and Racks) including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of LIU 24 (twenty four) Port Rack Mount - Loaded (SC) SM, 1U (one U) height, 19-inch (nineteen inch) rack mountable. Fiber optic LIU should include the LIU Box itself, Adapter Panel, Adapters and Pigtail as per requirement. Adapter panel: Cold Steel, 1.5mm (one point five millimetre) thickness. Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers. 4 (four) fiber spools built-in for 900um (nine hundred micrometre) tight buffered fiber storing. LIU shall be loaded with optical fiber pigtail – SC Type 1 Meter (one metre). Provide a field installable single mode SC pigtail to terminate fiber optic cables from cable-to-cable, cable-to-equipment and equipment-to-equipment. Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 (T I A slash E I A five six eight C point three) standards for repeatability. Buffer diameter 900um (nine hundred micrometre) tight buffer. Minimum bend radius: Install 30mm (thirty millimetre). Retention strength 20N (twenty newton). Cable: 900um (nine hundred micrometre) buffered. SM fiber pigtail, the cable type shall be HDPE/LSZH with a diameter of 3.0mm / 2.0mm (three point zero millimetre slash two point zero millimetre). Insertion Loss (Max) <0.3 dB (less than zero point three decibel) Max, Return Loss ≥50 dB (greater than or equal to fifty decibel) for UPC. Connector ferrule: Ceramic, SC Type, Simplex Type. Cable color Yellow. Repeatability <0.2 dB (less than zero point two decibel) 200 (two hundred) times mating cycle. Working Temperature -10°C to +70°C (minus ten degree Celsius to plus seventy degree Celsius), Storage Temperature -20°C to +70°C (minus twenty degree Celsius to plus seventy degree Celsius). All Passive of the same make (Copper, Fiber and Racks) including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of Patch Cord LC-LC SM Duplex, length 1m (one metre), 9/125µm (nine slash one two five micrometre) single mode G652D (G six five two D), Duplex Type (EIA/TIA, IEC, ANSI). Physical Contact (PC) connectors return loss >45 dB (greater than forty five decibel). Ultra Physical Contact (UPC) connectors return loss >50 dB (greater than fifty decibel). Angled Physical Contact (APC) connectors return loss >60 dB (greater than sixty decibel). Repeatability <0.2 dB (less than zero point two decibel) 1000 (one thousand) times mating cycle. Working Temperature –10°C to +70°C (minus ten degree Celsius to plus seventy degree Celsius). Storage Temperature –20°C to +70°C (minus twenty degree Celsius to plus seventy degree Celsius). All Passive of the same make (Copper, Fiber and Racks), including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of 17U (seventeen U) Enclosure Frame 600 x 600 (

six hundred by six hundred) steel with welded side walls, complete with accessories like fan, PDU, cable manager etc., including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Commscope / Rittal / Norden / Panduit / D-Link.

Supply, Installation, Testing and Commissioning of 27U (twenty seven U) Network Enclosure Frame 600 x 800 (six hundred by eight hundred) steel with accessories like fan, PDU, cable manager etc., including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Commscope / Rittal / Norden / Panduit / D-Link.

Supply, Installation, Testing and Commissioning of 32U (thirty two U) Network Enclosure FrameFrame 600 x 800 (six hundred by eight hundred) STEEL with accessories like fan pdu cable manager etc including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Commscope/Rittal/Norden/Panduit/D-Link

Supply, Installation, Testing and Commissioning of 42U (forty two U) Network Enclosure Frame 800 x 1000 (eight hundred by one thousand) steel with hexagonal perforated split rear door and accessories like fan, PDU, cable manager etc., including petty purchase to complete the job with five (five) year replacement warranty on site. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Commscope / Rittal / Norden / Panduit / D-Link.

Supply, Installation, Testing and Commissioning of HDPE 1" (one Inch) with Accessories including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble

LIFTS

Supplying, Installation, Testing and Commissioning of 2 No (two no) 26 passenger (twenty six passenger) with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :- KONE ,OTIS, JOHNSON, THYSSEN, MITSUBHSHI,SCHINDLER.

Type and Capacity : 1768 Kg (one thousand seven hundred and sixty eight kilogram), 26 Passengers (twenty six passengers), Speed: 1.0/1.25 meter per second (one point zero slash one point two five meter per second),Travel :- 28 mtr (twenty eight metres)(approx.),Controller : LVA/ACD, Serving:- 8 stop (eight stop) with all opening on all same side.,Hoist Way Dimensions :- (JOHNSON : 2350 mm W x 3000 mm D) (two thousand three hundred fifty millimetre W into three thousand millimetre D) (OTIS : 2350 mm W x 3000 mm D) (two thousand three hundred fifty millimetre W into three thousand millimetre D), Head Room Required :- ( JOHNSON;-48 METER (forty eight meter))( OTIS;-50 METER (fifty meter)),PIT Depth:-(JOHNSON :-1600 MM (one thousand six hundred millimetre)) (OTIS:-1600 MM (one thousand six hundred millimetre)) ,Car Size :- (JOHNSON : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D) (OTIS : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D),CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish,CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening, CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb., Door Opening :- (JOHNSON : 1000 mm W x 2000 mm H) (one thousand millimetre W into two thousand millimetre H) (OTIS : 1200 mm W x 2100 mm H) (one thousand two hundred millimetre W into two thousand one hundred millimetre H),"DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing", POWER SUPPLY :- 400/415 (four hundred / four hundred and fifteen volts), 3 Phase (three phase), A.C. supply, 50 Hzs (fifty hzs), FAN :- 1 No (one no) with 300 mm (three hundred millimetre) sweep ,FLOORING :- GRANITE, LIGHTING :- orange LED Illumination., INDICATORS:- dot matrix LED D & P Indicators in car. Details :- Motor compatible for 180 starts (one hundred and eighty starts) per hour.,Car operating panel with luminious floor button in car Automatic Break Testing, Battery operated alarm bell and emergency light , Fireman's switch and fire rated door for 120 minutes. (one hundred and twenty minutes.)Over load warning device Voice announcement .,Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish) Automatic Rescue Device complete with dry maintenance free batteries as required Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car. Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .Thes System should work during ARD operation also. Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD."Intercom facility Lift car :- Inbuilt intercom Reception & Lobby:1No (one no) each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system" Visual floor indication shall be provided above the lift car door anda bove the landing doors.Automatic phase reversal device and over voltage protection device Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates. The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Supplying, Installation, Testing and Commissioning of 2 No (two no) 20 passenger (twenty passenger) with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Ma

ke :- KONE ,OTIS, JOHNSON, THYSSEN, MITSUBHSHI SCHINDLER .

Type and Capacity : 1360 Kg (one thousand three hundred and sixty kilogram), 20 Passengers (twenty passengers) ,Speed : 1.0/1 (zero by one .)25 meter (twenty five meter) per second,Travel :- 16 mtr (sixteen metre)(approx.),Controller : LVA/ACD,Serving:- 5 stop (five stop) with all opening on all same side.Hoist Way Dimensions :- (JOHNSON : 2200 mm W x 3000 mm D) (two thousand two hundred millimetre W into three thousand millimetre D) (OTIS : 2200 mm W x 3000 mm D) (two thousand two hundred millimetre W into three thousand millimetre D),Head Room Required :- ( JOHNSON;-42 METER (forty two meter))( OTIS;-50 METER (fifty meter)), PIT Depth:-(JOHNSON:-1500 MM (one thousand five hundred millimetre)) (OTIS:-1600 MM (one thousand six hundred millimetre)) ,Car Size :- (JOHNSON : 1300 mm W x 2400 mm D) (one thousand three hundred millimetre W into two thousand four hundred millimetre D) (OTIS : 1300 mm W x 2400 mm D) (one thousand three hundred millimetre W into two thousand four hundred millimetre D) CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish, CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening, CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb. Door Opening :- (JOHNSON : 1100 mm W x 2100 mm H) (one thousand one hundred millimetre W into two thousand one hundred millimetre H) (OTIS : 1100 mm W x 2100 mm H) (one thousand one hundred millimetre W into two thousand one hundred millimetre H), "DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing".POWER SUPPLY :- 400/415 (four hundred / four hundred and fifteen volts), 3 Phase (three phase), A.C. supply, 50 Hzs (fifty hzs),FAN :- 1 No (one no) with 300 mm (three hundred millimetre) sweep, FLOORING :- GRANITE,LIGHTING :- orange LED Illumination. INDICATORS:- dot matrix LED D & P Indicators in car. Details :- Motor compatible for 180 starts (one hundred and eighty starts) per hour. Car operating panel with luminious floor button in car Automatic Break Testing Battery operated alarm bell and emergency light Fireman's switch and fire rated door for 120 minutes. (one hundred and twenty minutes.) Over load warning device Voice announcement. Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish), Automatic Rescue Device complete with dry maintenance free batteries as required, Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car. Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .Thes System should work during ARD operation also. Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD. "Intercom facility Lift car :- Inbuilt intercom, Reception & Lobby:1No (one no) each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system" Visual floor indication shall be provided above the lift car door anda bove the landing doors. Automatic phase reversal device and over voltage protection device Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates. The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Type and Capacity : 1768 Kg (one thousand seven hundred and sixty eight kilogram), 26 Passengers (twenty six passengers), Speed: 1.0/1.25 meter per second (one point zero slash one point two five meter per second),Travel :- 28 mtr (twenty eight metres)(approx.),Controller : LVA/ACD, Serving:- 8 stop (eight stop) with all opening on all same side.,Hoist Way Dimensions :- (JOHNSON : 2350 mm W x 3000 mm D) (two thousand three hundred fifty millimetre W into three thousand millimetre D) (OTIS : 2350 mm W x 3000 mm D) (two thousand three hundred fifty millimetre W into three thousand millimetre D), Head Room Required :- ( JOHNSON;-48 METER (forty eight meter))( OTIS;-50 METER (fifty meter)),PIT Depth:-(JOHNSON :-1600 MM (one thousand six hundred millimetre)) (OTIS:-1600 MM (one thousand six hundred millimetre)) ,Car Size :- (JOHNSON : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D) (OTIS : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D),CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish,CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening, CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb., Door Opening :- (JOHNSON : 1000 mm W x 2000 mm H) (one thousand millimetre W into two thousand millimetre H) (OTIS : 1200 mm W x 2100 mm H) (one thousand two hundred millimetre W into two thousand one hundred millimetre H),"DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing", POWER SUPPLY :- 400/415 (four hundred / four hundred and fifteen volts), 3 Phase (three phase), A.C. supply, 50 Hzs (fifty hzs), FAN :- 1 No (one no) with 300 mm (three hundred millimetre) sweep ,FLOORING :- GRANITE, LIGHTING :- orange LED Illumination., INDICATORS:- dot matrix LED D & P Indicators in car. Details :- Motor compatible for 180 starts (one hundred and eighty starts) per hour.,Car operating panel with luminious floor button in car Automatic Break Testing, Battery operated alarm bell and emergency light , Fireman's switch and fire rated door for 120 minutes. (one hundred and twenty minutes.)Over load warning device Voice announcement .,Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish) Automatic Rescue Device complete with dry maintenance free batteries as required Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car. Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .Thes System should work during ARD operation also. Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD."Intercom facility Lift car :- Inbuilt intercom Reception & Lobby:1No (one no) each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system" Visual floor indication shall be provided above the lift car door anda bove the landing doors.Automatic phase reversal device and over voltage protection device Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates. The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Supplying, Installation, Testing and Commissioning of 2 No (two no) 20 passenger (twenty passenger) with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Ma

Supplying, Installation, Testing and Commissioning of 1 No (one no) 26 passenger (twenty six passenger) with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :- KONE ,OTIS, JOHNSON, THYSSEN, MITSUBHSHI SCHINDLER .

Type and Capacity : 1768 Kg (one thousand seven hundred and sixty eight kilogram), 26 Passengers (twenty six passengers) ,Speed : 1.0/1.25 (one point zero / one point two five) meter per second, Travel :- 36 mtr (thirty six metre)(approx.). Controller : LVA/ACD, Serving:- 10 stop (ten stop) with all opening on all same side. Hoist Way Dimensions :- (JOHNSON : 2400 mm W x 3300 mm D) (two thousand four hundred millimetre W into three thousand three hundred millimetre D) (OTIS : 2350 mm W x 3000 mm D) (two thousand three hundred fifty millimetre W into three thousand millimetre D) Head Room Required :- (JOHNSON;-45 METER (forty five meter))( OTIS;-50 METER (fifty meter)) PIT Depth:-(JOHNSON:-1600 MM (one thousand six hundred millimetre)) (OTIS:-1600 MM (one thousand six hundred millimetre)) Car Size :- (JOHNSON : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D) (OTIS : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D)CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish, CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening, CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb.Door Opening :- (JOHNSON : 1000 mm W x 2000 mm H) (one thousand millimetre W into two thousand millimetre H) (OTIS : 1200 mm W x 2100 mm H) (one thousand two hundred millimetre W into two thousand one hundred millimetre H),"DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing",POWER SUPPLY :- 400/415 (four hundred four hundred and fifteen volts), 3 Phase (three phase), A.C. supply, 50 Hzs (fifty hzs),FAN :- 1 No (one no) with 300 mm (three hundred millimetre) sweep, FLOORING :- GRANITE, LIGHTING :- orange LED Illumination. INDICATORS:- dot matrix LED D & P Indicators in car., Details :- Motor compatible for 180 starts (one hundred and eighty starts) per hour. Car operating panel with luminious floor button in car Automatic Break Testing Battery operated alarm bell and emergency light Fireman's switch and fire rated door for 120 minutes. (one hundred and twenty minutes.),Over load warning device Voice announcement .Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish), Automatic Rescue Device complete with dry maintenance free batteries as required, Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car. Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .These System should work during ARD operation also.Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for l

ifts issued by MOUD."Intercom facility,Lift car :- Inbuilt intercom, Reception & Lobby:1No (one no) each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system", Visual floor indication shall be provided above the lift car door and above the landing doors. Automatic phase reversal device and over voltage protection device ,Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates., The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Annual comprehensive maintenance of 3 No (three no) 26 passenger (twenty six passenger) , 2 nos (two nos) 20 passenger (twenty passenger) with machine room lift, 1.0/1.25 MPS (one point zero / one point two five MPS), simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year (For Second year)

Annual comprehensive maintenance of 3 No (three no) 26 passenger (twenty six passenger) , 2 nos (two nos) 20 passenger (twenty passenger) with machine room lift, 1.0/1.25 MPS (one point zero slash one point two five MPS), simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Annual comprehensive maintenance For Third Year

Annual comprehensive maintenance of 3 No (three no) 26 passenger (twenty six passenger) , 2 nos (two nos) 20 passenger (twenty passenger) with machine room lift, 1.0/1.25 MPS (one point zero slash one point two five MPS), simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Annual comprehensive maintenance For Fourth Year

Annual comprehensive maintenance of 3 No (three no) 26 passenger (twenty six passenger) , 2 nos (two nos) 20 passenger (twenty passenger) with machine room lift, 1.0/1.25 MPS (one point zero slash one point two five MPS), simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Annual comprehensive maintenance For Fifth Year

Addressable Fire alarm system

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 (two hundred forty)devices (including detectors) and minimum 120 detectors (one hundred and twenty detectors) per loop and loop length up to 2 km (two kilometre), network communication card, minimum 320 character (three hundred and twenty character) graphics/ LCD display with touch screen or other keypad and minimum 4000 events (four thousand events) history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 Hz) (two hundred thirty plus/minus five percent volt, fifty hertz), 48 hrs (forty eight hours) back-up with 24 volt (twenty four volt) sealed maintenance free batteries with automatic charger.The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.Ten Loop Panel.including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier of Honeywell/ Cerberus of Siemens /Edward/Bosch as approved by EngineEngineer-in-Charge.

Supply, installation, testing and commissioning of Addressable intelligent Active Loop Repeater Fire terminal with inbuilt turbo isolator, Backlit LCD Display 240 characters (two hundred and forty characters) display, having Controls for Reset, Mute, Accept , Silence alarms and Self Test, with programmable free keys etc. The repeater panel shall be possible to connect upto 4 repeater (four repeater) panel with each fire detection and alarm panel and complete in all respect as required including entire carriage with all leads and lifts.The panel shall have proper listing and approval from NFPA, UL,ULC, FM, CSFM,LPCB, VDS,BRE AND AS PER RELEVANT IS CODE including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make: Notifier of Honeywell/ Cerberus of Siemens /Edward/Bosch as approved by EngineEngineer-in-Charge.

Supplying, Installation, Testing and Commissioning of addressable multisensor smoke detector shall be with built in microprocessor and short circuit isolator capable including common mounting base plug in type and interchangeable with other smoke detector.The alarm LED shall be preferably 360 degree.The (three hundred and sixty degree.the) static voltage overload protection shall be inbuilt etc. as per NFPA 72 style (seventy two style) 7 wiring (seven wiring) requirements (one for incoming and one for outgo

ing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements (seven requirements); Drift Compensation feature and Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP rated EMC safety for detector shall be 50 V/m. (fifty volt/metre) Shall be UL/EN/VDS certification.The Detector shall be fully tested and each detector should bear the SI no and seal of the approving laboratory and complete in all respects as requied including entire carriage with all leads and lifts. The panel shall have proper listing and approval from NFPA, UL,ULC, FM, CSFM,LPCB, VDS,BRE AND AS PER RELEVANT IS CODE including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make:- Honeywell/Bosch/ Siemens/ Edwards/ Simplex) and as approved by the EngineEngineer-in-Charge.

Supply, installation, testing & commissioning of Intelligent Addressable Heat Detector (Static + ROR) with inbuilt turbo Isolator and integral response indicator with 360 degree (three hundred and sixty degree) viewing angle. Detector shall communicate 3 danger (three danger) levels for differentiated alarm activation. It has maximum triggering temperature programmable from 58C (fifty eight c) to 81C. (eighty one c.) Detector should have unque address for communication and assigned through panel with Mounting Base as required with the protection category of IP40 (IP forty) and Duly Approved by EN54 (EN fifty four)/LPCB/VDS/FM All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)

Supply, Installation, Testing and Commissioning of addessable Single ACTION manual pull station & necessary fixing arrangements with key complete as required. MCP should have IP40 (IP forty) or better protection rating Shall be UL-FM/EN54 (EN fifty four)-VDS Listed Certification. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)

Supply, Installation, Testing and Commissioning of Addressable Phone Control Module with 1 input (one input), which shall monitor normally open or normally closed contacts.The module shall have an LED to indicate module status.It Shall be UL-FM/EN54 (EN fifty four)-VDS Listed Certification.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)

Supply, Installation, Testing and Commissioning of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 style (seventy two style) 7 wiring (seven wiring) requirements .Relay Control module shall be used for emergency control functions including shutting down Fire dampers in AHU's, tripping of AHU's, Fresh air fans, Ventilation fans, tripping of Access control doorsetc, Shall be UL-FM/EN54 (EN fifty four)-VDS Listed Certification.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)

Supply, Installation, Testing and Commissioning of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm (three hundred millimetre into two hundred fifty millimetre into one point five millimetre) rigid sheet signage containing Zink Sulphate as bare chemical class – 1 material (one material) PSPA fixed on 3 mm (three millimetre) acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour & material required to complete the job in all respect up to the entire satisfaction of EngineEngineer-in-Charge of work. including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make:- PES/Giolite/OMEX/BAJAJ/CROMPTON/PHILIPS/WIPRO/ LEGRAND

Supply, Installation, Testing and Commissioning of 3/1.5 W (three slash one point five watt) horn type loudspeakers with the following features: built-in 100/70 V (one hundred slash seventy volt) LMT, compliant with IEC 60268 – Part 5 (six zero two six eight – part five). Power tapping 15/7.5/3.75 W (fifteen slash seven point five slash three point seven five watt). Sound pressure level at 3/1.5 W/1 W(three slash one point five watt slash one watt) (one kilohertz, one metre) 115/103 dB (one hundred fifteen slash one hundred three decibel SPL), complete with necessary mounting hardware and accessories. Certified to UL / EN standards as required, complete in all respects. All rates are inclusive of carriage of materials within all leads and lifts and a

ll taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Honeywell / Bosch / Siemens / Edwards / Simplex.

Supply, Installation, Testing and Commissioning of cabinet speaker, maximum power 12 W (twelve watt), rated power (PHC) 9 W (nine watt) with tapping levels 6/3/1.5 W (six slash three slash one point five watt). Sound pressure level at rated power / 1 W (one watt) at 1 kHz / 1 m (one kilohertz / one metre) – 96 dB / 90 dB (ninety six decibel slash ninety decibel). Effective frequency range (minus ten decibel) 200–15000 Hz (two hundred to fifteen thousand hertz). Opening angle at 1 kHz / 4 kHz (one kilohertz slash four kilohertz, six decibel) – 150° / 70° (one hundred fifty degree slash seventy degrees). Rated voltage 100 V (one hundred volt), rated impedance 1667 Ω (one thousand six hundred sixty seven ohm). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Honeywell / Bosch / Siemens / Edwards / Simplex.

Supply, Installation,testing & Commissioning of digital autio amplifire 75 watt (seventy five watt),25 V (twenty five volt) rms opreating 240V (two hundred and forty volt) AC supply complete as required.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make:- Honeywell/ Bosch/ Siemens/Edwards/ Simplex

Supplying & laying of 2x1.5 sqmm (two into one point five square millimetre) fire alarm armoured cable, 600/1000 (six hundred slash one thousand volt) rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- Polycab / KEI/ Finolex

Supply, Installation, Testing and comissioning of 2 core (two core) multistrand 1.5 sq mm (one point five sq millimetre) annealed copper conductor Fire alarm & speaker cable in existing pipe/ channel I/C connection etc.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalblespeaker cable Single pair, 2-core (two core), 1.5 sqmm (one point five square millimetre) Make:- Polycab / KEI/ Finolex

Supplying & laying of 2x1.5 sqmm (two into one point five square millimetre) fire alarm armoured cable, 600/1000 (six hundred slash one thousand volt) rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- Polycab / KEI/ Finolex

Supply and erection of 25 mm (twenty five millimetre) dia PVC conduit pipe ISI marked (HEAVY) re

cessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMAKE:- Diplast/BEC/NIC

Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department. Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (For Second year)

Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Add for comperehensive maintenace for Third Year

Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Add for comperehensive maintenace for Fourth Year

Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for Fifth Year

FIRE FIGHTING SYSTEM

Type and Capacity : 1768 Kg (one thousand seven hundred and sixty eight kilogram), 26 Passengers (twenty six passengers), Speed: 1.0/1.25 meter per second (one point zero slash one point two five meter per second),Travel :- 28 mtr (twenty eight metres)(approx.),Controller : LVA/ACD, Serving:- 8 stop (eight stop) with all opening on all same side.,Hoist Way Dimensions :- (JOHNSON : 2350 mm W x 3000 mm D) (two thousand three hundred fifty millimetre W into three thousand millimetre D) (OTIS : 2350 mm W x 3000 mm D) (two thousand three hundred fifty millimetre W into three thousand millimetre D), Head Room Required :- ( JOHNSON;-48 METER (forty eight meter))( OTIS;-50 METER (fifty meter)),PIT Depth:-(JOHNSON :-1600 MM (one thousand six hundred millimetre)) (OTIS:-1600 MM (one thousand six hundred millimetre)) ,Car Size :- (JOHNSON : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D) (OTIS : 1600 mm W x 2400 mm D) (one thousand six hundred millimetre W into two thousand four hundred millimetre D),CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish,CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening, CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb., Door Opening :- (JOHNSON : 1000 mm W x 2000 mm H) (one thousand millimetre W into two thousand millimetre H) (OTIS : 1200 mm W x 2100 mm H) (one thousand two hundred millimetre W into two thousand one hundred millimetre H),"DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing", POWER SUPPLY :- 400/415 (four hundred / four hundred and fifteen volts), 3 Phase (three phase), A.C. supply, 50 Hzs (fifty hzs), FAN :- 1 No (one no) with 300 mm (three hundred millimetre) sweep ,FLOORING :- GRANITE, LIGHTING :- orange LED Illumination., INDICATORS:- dot matrix LED D & P Indicators in car. Details :- Motor compatible for 180 starts (one hundred and eighty starts) per hour.,Car operating panel with luminious floor button in car Automatic Break Testing, Battery operated alarm bell and emergency light , Fireman's switch and fire rated door for 120 minutes. (one hundred and twenty minutes.)Over load warning device Voice announcement .,Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish) Automatic Rescue Device complete with dry maintenance free batteries as required Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car. Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .Thes System should work during ARD operation also. Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD."Intercom facility Lift car :- Inbuilt intercom Reception & Lobby:1No (one no) each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system" Visual floor indication shall be provided above the lift car door anda bove the landing doors.Automatic phase reversal device and over voltage protection device Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates. The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Providing, laying, testing and commissioning of ‘C’ class heavy-duty MS (mild steel) pipe conforming to IS 1239 (one two three nine) / Class-II of IS 3589 (three five eight nine), including welding and fittings such as elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., and fixing the pipe on the wall or ceiling with core cutting, suitable clamps/support frames, and primer. Painting with two (two) or more coats of synthetic enamel paint of required shade, complete as required, including any petty materials or accessories necessary to complete the job as specified. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- TATA / Jindal / SAIL / Zenith Birla.

25 mm (twenty five millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply, Installation, Testing and Commissioning of 1G SFP Transceiver single-mode 9/125 µm fiber 10 km (one G SFP Transceiver single-mode nine slash one two five micrometre fiber ten kilometre). The Transceiver should be Small Form-Pluggable (SFP) form factor and compatible with quoted switches. IEEE 802.3z 1000BASE-LX Gigabit Ethernet (I E E E eight zero two point three z one zero zero zero BASE-L X Gigabit Ethernet), SFP (Small Form Pluggable), LC Duplex, IEEE 802.3 compatible (I E E E eight zero two point three compatible), 1310 nm (one three one zero nanometre), single-mode fiber (9/125 µm) (nine slash one two five micrometre fiber). Operating Temperature: 0 to 70 °C (zero to seventy degree Celsius), Storage Temperature: -40 to 85 °C (minus four zero to eight five degree Celsius). Compliance: MSA Compliant. Switch and Fiber Modules should be from same OEM. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. Including petty purchase to complete the job with five-year replacement warranty on site . All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Juniper / D-Link / Cisco / Arista.

Supply, Installation, Testing and Commissioning of Category 6 (six) Unshielded Twisted Pair 4 pair 100W cable (four pair one hundred watt cable) shall be compliant with ANSI/TIA/EIA-568-C.2 (A N S I slash T I A slash E I A five six eight dash C point two). Cable shall extend between the work area location and its associated telecommunications closet and consist of 4 pair, 23 AWG, UTP (four pair, twenty three A W G, U T P). ETL Verified and UL Listed. Category 6(six) should operate on bandwidth up to 250 MHz (two hundred and fifty megahertz) as per standard. Four twisted pairs separated by internal X-shaped, four channel, full separator. Half shall not be accepted. Conductor 23(twenty three) AWG solid bare copper (twenty three A W G solid bare copper). Conductor insulation material: High Density Polyethylene and Sheath: FR PVC, PVC Grey – single sheath, insulation thickness 0.2 mm nominal (zero point two millimetre nominal). Pairs consist of two insulated conductors twisted together. Each meter printed with sequential length counter. Pulling Force: 11.5 Kg (eleven point five kilogram). Temperature Rating -20° to +70°C (minus twenty degree to plus seventy de

gree Celsius). Storage Temperature Rating 0° to +50°C (zero degree to plus fifty degree Celsius). Filler required, rip cord provided. Packing: Reels of 305 m length with spool (three hundred and five metre length with spool). Conductor resistance (DC) 9.38 Ohms/100 m (nine point three eight ohms per one hundred metre). Resistance unbalance 5% max (five percent maximum). Mutual capacitance 5.6 nF/100 m (five point six nanofarad per one hundred metre) max. Capacitance unbalance 330 pF/100 m (three three zero picofarad per one hundred metre) max. Nominal velocity of propagation 69% (sixty nine percent). Characteristic impedance 100 ±15% Ohms (one hundred plus/minus fifteen percent ohms). Worst case cable skew 45 ns/100 m (forty five nanosecond per one hundred metre). Generally conforming to EIA/TIA-568-C.2 and IEC/ISO 11801 (E I A slash T I A five six eight dash C point two and I E C slash I S O one one eight zero one). OEM for the cable box and all copper accessories shall be from the same OEM. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

Supply, Installation, Testing and Commissioning of Patch Panel 24 Port 1U Size (twenty four Port one U Size) loaded with 24 Port RJ-45 IO (twenty four Port R J forty five I O). Mounts in standard 19 inch racks (nineteen inch racks). Cable manager for improved cable management. Patch Panel suitable for Category 6(six) keystone. SPCC and Black Color. Rear support bar material SPCC and Black Color. RJ-45 jack housing PBT + Glass fiber UL94V-0 (R J forty five jack housing P B T plus glass fiber U L nine four V dash zero) and contact brackets PBT + Glass fiber UL94V-0 (contact brackets P B T plus glass fiber U L nine four V dash zero). RJ-45 contact material phosphor bronze with nickel plating and plug contact area finished with 50 micro-inches Gold plating (fifty micro-inches gold plating). Contact resistance maximum 20 milliohm (twenty milliohm maximum). Operating Temperature -10° Celsius to 60° Celsius (minus ten degree Celsius to sixty degree Celsius). Life of RJ-45 jack 750 cycles minimum @ 500 VDC (seven hundred and fifty cycles minimum at five hundred volt direct current). ETL Verified and UL Listed. Including petty purchase to complete the job with five year replacement warranty on site (five year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

32 mm (thirty two millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

40 mm (forty millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

50 mm (fifty millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

65 mm (sixty five millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

80 mm (eighty millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

100 mm (one hundred millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

150 mm (one hundred and fifty millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

200 mm (two hundred millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing first-aid hose reel with MS (mild steel) construction, spray painted in post office red, conforming to IS 884 (eight eight four), complete with 30 metre (thirty metre) hose as required: (a) 20 mm (twenty millimetre) nominal internal diameter water hose, thermoplastic (textile reinforced) Type-2 (type two) as per IS 12585 (one two five eight five). (b) 20 mm (twenty millimetre) nominal internal diameter gun-metal globe valve and nozzle. (c) Drum and brackets for fixing the equipment on wall. (d) Connections from riser with 25 mm (twenty five millimetre) diameter stop gun-metal valve and MS pipe and socket, including any petty material or accessory required to complete the job as specified. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Minimax / Ceasefire / Newage / Omex / Safex.

Supplying and fixing single headed internal/external Gunmetal hydrant valve with instantaneous Gunmetal coupling of 63 mm (sixty three millimetre) dia with cast iron wheel ISI marked conforming to IS 5290(five two nine zero) (Type -A) with blank Gunmetal cap and chain including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/

Supplying and fixing 63 mm (sixty three millimetre) dia, 15 m (fifteen metre) long RRL hose pipe with Gun metal 63 mm (sixty three millimetre) dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636(six three six) (type-A) including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/

Supplying & fixing 63 mm (sixty three millimetre) dia gun metal short branch pipe with 20 mm (twenty millimetre) nominal internal diameter size nozzle conforming to IS 903 (nine hundred and three) suitable for instantaneous connection to interconnect hose pipe coupling as required:.including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/

Providing and fixing fibre glass reinforced fire hose cabinet (30" x 24" x 10") (thirty inch into twenty four inch into ten inch), outdoor type, made out of sheet having glazed door with 6 mm (six millimetre) thick clear glass, including necessary locking arrangement with Allen key. Cabinet to be powder coated with post office red paint and suitable for housing 2 Nos (two numbers) RRL hose pipes and 1 No (one number) branch pipe, including grounding and inscribing the words “Hose Cabinet” on the box. Complete in all respects including any petty material or accessory required to complete the job as specified. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- Minimax / Ceasefire / Newage / Omex / Safex.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 (nine hundred and four) including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/

FourWay. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 (one point six) with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780(seven eight zero) of following sizes complete in all respect, including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR

80 mm (eighty millimetre) Dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

100 mm (one hundred millimetre) Dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

150 mm (one hundred and fifty millimetre) Dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 (five thousand three hundred and twelve) complete with rubber gasket, GI bolts, nuts, washers etc.as complete in all respect, including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR

80 mm (eighty millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply, Installing, testing and commissioning of 100mm (one hundred millimetre) dial type pressure gauge gate valve with all accessories complete in all respect, including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE DANFOSS/INDFOS/DELTA CONTROL

supply, Installing, testing and commissioning of 25mm (twenty five millimetre) dia gate valve with all accessories .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make .SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR

Supplying and fixing air vessel made of 250 mm (two hundred and fifty millimetre) dia, 8 mm (eight millimetre) thick MS sheet, 1200 mm (one thousand two hundred millimetre) in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm (twenty five millimetre) dia gun metal wheel valve with required accessories, pressure gauge and primer ,painting with synthetic enamel paint of approved shade as required. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

(a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 (one two four six nine : two zero one nine) suitable for automatic operation and consisting of following, complete in all respects, as required : (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP Squirrel cage induction motor, 2850 lpm (two thousand eight hundred fifty litres per minute) at 70 m (seventy metre) Head TEFC, synchronous speed 1500 RPM (one thousand five hundred revolutions per minute), suitable for operation on 415 volts (four hundred fifteen volt), 3 phase (three phase) 50 Hz (fifty hertz), AC supply with IP 55 (I P five five) protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018 (one two six one five : two zero one eight).(d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e)Suitable cement concrete foundation duly plastered with anti vibration pads. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.(Make:KIRLOSK

AR/ ABB/ SIEMENS)

(a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 (one two four six nine : two zero one nine) suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor 180 lpm (one hundred eighty litres per minute) at 70 m (seventy metre) Head TEFC type suitable for automatic operation on 415 volts (four hundred fifteen volt), 3 phase (three phase) 50 Hz (fifty hertz) AC supply with IP 55 (I P five five) class of protection for enclosure, horizontal foot mounted type with Class 'F' insulation, conforming to IS-12615: 2018 (one two six one five : two zero one eight). (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royality, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. (Make: KIRLOSKAR / ABB / SIEMENS)

(a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 (one two four six nine : two zero one nine) suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) (b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP, 2850 lpm (two thousand eight hundred fifty litres per minute) at 70 m (seventy metre) Head 1500 RPM (one thousand five hundred revolutions per minute) water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 / 24 volts (twelve slash twenty four volt) electric starting equipment, Engine accessories; fuel service tank with necessary pipe work, fuel filter, pump for lubricating oil and lub oil filter, necessary safety control, a standard kit of tools (this shall be kept on hand at all times). (3) Fuel tank suitable for minimum 12 hrs (twelve hours) running and its foundation, with one empty barrel suitable for 200 ltr (two hundred litre) with diesel 200 ltr (two hundred litre) diesel and 1 (one) fuel hand pump with 5 mtr (five metre) flexible hose including fuel piping (supply and return) with suitable wheel valve on supply line, exhaust pipe extended upto 10 m (ten metre) outside pump house duly insulated with 50 mm (fifty millimetre) thick glass wool with 1.0 mm (one point zero millimetre) thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royality, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. (Make: KIRLOSKAR / ABB / SIEMENS)

(a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 (one two four six nine : two zero one nine) suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor 900 lpm (nine hundred litres per minute) at 35 m (thirty five metre) Head TEFC type suitable for operation on 415 volts (four hundred fifteen volt), 3 phase (three phase), 50 Hz (fifty hertz) AC supply with IP55 (I P five five) class of protection for encl

osure, horizontal foot mounted type with Class 'F' insulation, conforming to IS-12615: 2018 (one two six one five : two zero one eight). (d) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royality, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. (Make: KIRLOSKAR / ABB / SIEMENS)

Providing and fixing Carbon dioxide CO2 (carbon dioxide) 4.5 kg (four point five kilogram) type fire extinguishers ISI mark, CE and EN certified, consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge, internal discharge tube, 30 cms (thirty centimetre) long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 (one five six eight three) finished externally with red enamel paint and M.S. wheel type complete with internal charge including five year (five year) site on warranty, any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- Minimax / Ceasefire / Safex / Omex.

Providing & fixing of IS marked 15683 (one five six eight three) Water CO2 (carbon dioxide) type 9 Litre (nine litre) (S/P) cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle etc., finished externally with red enamel paint and fixed to wall with brackets complete with internal charges, including five year (five year) site on warranty, any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- Minimax / Ceasefire / Safex / Omex.

Providing and fixing 4 kg. (four kilogram) ABC MAP-50% (fifty percent) Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. (fifteen thousand six hundred and eighty three .) Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases. including five year site on warranty any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Minimax/Ceasefire/SAFEX/OMEX

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm (one point six millimetre) thick stainless steel, Grade 304 (three zero four), sheet with 3 mm (three millimetre) dia holes with stainless steel flange.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make SANT/ZOLOTO/LEADER/ KIRLOSKAR

80 mm (eighty millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

150 mm (one hundred and fifty millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing fixing,testing and commissioning of 15mm (fifteen millimetre) dia chorme furnihsed sprinkler head with quartz type bulb, set to opreate at 68 degree (sixty eight degree) C complete as per specification,sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make. Minimax/Ceasefire/SAFEX/OMEX/TYCO/Newage

Pendent Sprinkler. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Upright sprinkler. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Horizantal side wall Sprinkler. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Concealed sprinkler. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT (fifteen NPT) on reducer thread with maximum working pressure of 175 PSI (one hundred and seventy five PSI) test pressure of 875 PSI (eight hundred and seventy five PSI) (Burst) with branch line (Inlet) 25mm (twenty five millimetre) NPT male thread to sprinkler head (Outlet) 15mm (fifteen millimetre) NPT female thread with reducer, nipple, 2 side (two side) brackets, center bracket, stockbar of 1500 mm (one thousand five hundred millimetre) complete as required. Make. Minimax/Ceasefire/SAFEX/OMEX/TYCO/Newage

Providing and Fixing UL/FM Listed Powder frinesh Esuitecheon Plate Complete inculding fixing in position on pipe and celling complete in all respect.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Provding and Fixing flow Switch in following size MS pipeincluding connection. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (MAKE: LIFEGUARD/SYSTEM SENSOR/ PLOTTER/JOHNSON CONTROL/H-GURU

100 mm (one hundred millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

150 mm (one hundred and fifty millimetre) dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, installation, Testing and Commissioning Control Valve of cast iron body,brass/bronze working part compring of water motor Alarm ,bronze seet clapper arm and hydraulically driven nechanical gong bell to sound continouous alarm when the Wet Riser /Sprinklert system activates pressure gauge emergency ,releases,strainer,pressure switch, Cock Valve complete with drain valve and bypass,let control box ball valve ,MS Pipe required size, flanges orifice plate ,gasket etc of following size as required. Make .SANT/ZOLOTO/LEADER/ KIRLOSKAR

Providing ,Fixing of 4mm (four millimetre) thick anti Corrosive Pipe Protection Bitminous tape. Make. IWL ,All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable with lugs and gland, IS 7098 (PART-I) working voltage 1100 volts (one thousand one hundred volts) grade on surface etc.of the required size.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes a

s imposed by the Govt time to time where applicalble. Make Havells. KEI. Finolex

Armoured cable 16 sq.mm (sixteen sqaure millimetre) ( 3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 35 sq.mm (thirty five sqaure millimetre) ( 3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Armoured cable 70 sq. mm(seventy sqaure millimetre) ( 3.5 core (three point five core)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, installation, testing and commissioning of single section collecting head with cast iron body, nose coupling Draw-off Connection - Inlet 100mm (one hundred millimetre) & Outlet 80mm (eighty millimetre) with female outlet complete bolts, nuts and rubber insertions complete in all respect as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/

Providing and fixing following size Cast iron / steel Foot Valve confirming to type P.N 1.6 (one point six) of I.S 13095-1991 (one three zero nine five : one nine nine one) complete with flanges, bolts, nuts, gasket etc. as per Table 'E' specification complete in all respect, hydraulically test to 20 Kgs/sqcm (twenty kilogram per square centimetre), including all petty material and accessories required to complete the job in all respect. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- SANT / ZOLOTO / LEADER / KIRLOSKAR / KARTAR.

200 mm (two hundred millimetre) Dia. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and installaton 300 mm (three hundred millimetre) width X 50 mm (fifty millimetre) depth X 1.6 mm (one point six millimetre) thickness size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5% (seventeen point five percent), in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.as approved by the EngineEngineer-in-Charge.

Manifold Gas Pipeline System

Supply, installation, testing and commissioning of Oxygen Manifold (10+10) (ten plus ten). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201 / NFPA 99 / DIN / EN / ISO73961 (zero two zero one NFPA/ ninety nine /DIN/EN/ISO seven three nine six one) standards. It shall be compatible with Class D type bulk cylinders. Manifold shall consist of two (two) high pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224 (three two two four) / BS / ASME incorporating a check valve at the header connection. The high pressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high pressure shut off valve. Oxygen manifold should consist of two (two) rows of respective numbers of Class D type bulk oxygen cylinders. The manifold should be hydraulically tested to 3000 psig (three thousand pounds per square inch gauge). The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system should have non-return valves for easy changing of cylinders without closing the bank. The cylinder should be placed with the help of cylinder brackets and fixing chains which should be galvanized, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. MAKE:- AKTIV / Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon.

Supply, installation, testing and commissioning of fully automatic Oxygen Control Panel 2100 LPM (two thousand one hundred litres per minute) @ 50 to 55 PSI (fifty to fifty five pounds per square inch). The fully automatic control panel should comply with NFPA 99 / HTM 0201 / ISO 73961 NFPA (ninety nine /HTM zero two zero one / ISO seven three nine six one) standard. It shall be fully automatic, including shifting to secondary bank when the service bank is exhausted, with automatic reset of replaced bank to primary status. Semiautomatic manifolds are not acceptable. The manifold control(s) shall incorporate including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. MAKE:- AKTIV / Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon. a) Pressure transducer to actuate designated signals when service bank is exhausted. b) Visible display on control unit to determine when primary bank is exhausted, and the secondary bank is in operation. A continuously lit green indicator to indicate header in use. c) HMI touch Screen to indicate contents of each header. d) An amber indicator of header ready for the secondary header. A red indicator of header empty for each header. e) Display on HMI touch Screen for line pressure/Gas Flow in lpm/ FiO2 (FiO two). f)Manifold design shall ensure that the failure of any one component does not prevent continued supply of gas to patients. Manifolds design shall incorporate ed regulators for header switching and shall not require heaters for any gas. Alarm Manifold power supply shall be separate unit for ease of installation. Wiring between manifold and power supply shall be manufacturer supplied. Manifolds requiring electrical work inside the manifold cabinet during installation are not acceptable. Wiring shall terminate in power supply box not in manifold. Manifolds which can perform switching operations with electrical power are acceptable. The manifold panel should be compatible with Hospital BMS provides all relevant signals to be publish on Hospital BMS structure. Manifold Control Panel should have CDSCO license/ AMERICAN ETL/UL Listed or EU MDR/MDD certified from notified body having four digit notified number.

Supply, installation, testing and commissioning of Emergency Oxygen Manifold (3x3) (three by three). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201 / NFPA 99 / DIN / EN / ISO73961 (HTM zero two zero one / NFPA ninety nine / DIN / EN / ISO seven three nine six one) standards. It shall be compatible with Class D type bulk cylinders. Manifold shall consist of two (two) high pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224 (I S three two two four) / BS / ASME incorporating a check valve at the header connection. The high pressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high pressure shut off valve. Oxygen manifold should c

onsist of two (two) rows of respective numbers of Class D type bulk oxygen cylinders. The manifold should be hydraulically tested to 3000 psig (three thousand pounds per square inch gauge). The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system should have non-return valves for easy changing of cylinders without closing the bank. The cylinder should be placed with the help of cylinder brackets and fixing chains which should be galvanized, with piston operated regulator, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- AKTIV / Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon.

Supply Installation and Testing commissioning of Oxygen, air and vacuum outlets . The outlets and probes should be as specific and non- interchangeable. The gas outlets have heavy duty constituents and smooth connection and disconnection. The outlets must be labeled and color coded. CDSCO approval is must for both indian and imported outlets including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make;-Becon Medeas / Atlas Copco / Greggorson / Amico / Penlon Medical gas terminal units consist of two parts, First fix – the wall mounted assembly consists of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow 130 degrees (one hundred and thirty degrees) radial movement of the copper stub to align with the pipeline. The second fix plastic components shall be manufactured with the pin index permanently moulded into the gas specific socket. The socket assembly shall retain a capsule assembly, containing the check valve and probe ‘O’ ring seals. Second fix terminal units shall be supplied with the anti-rotation pin loose and bagged to be fitted as required. The socket is fixed to the base block with a design that insure profile is always in the correct position. Probes are gas specific connectors that couple to the medical gas terminal unit sockets to provide access to gas systems. The replaceable capsule assembly shall enable all working parts subject to wear through usage to be replaced as a factory tested assembly, thereby reducing maintenance time. Each termination block assembly shall be pressure tested by the pressure decay method. All screws, probe roller pins, locking springs and the anti-rotation pin shall be manufactured from stainless steel. The second fix assembly shall incorporate three injection moulded parts in fire-retardant nylon 66 (sixty six). All wetted parts (except seals) shall be brass or copper. Copper stubs pipes shall be manufactured from phosphorous de-oxidised non-arsenical copper. All elastomeric seals shall be manufactured from Viton with a Shore hardness of 75(seventy five). All user accessible parts, 2nd (second) fix, gas ID ring, plaster box, trim plate and inks shall include Biomaster silver ion antimicrobial additive for inherent antimicrobial protection. Terminal units installed in walls, bedhead trunking, headwalls or f ixed pendants shall be connected to the pipeline with a copper stub pipe. Pressure gases and vacuum shall incorporate a 12mm (twelve millimetre) O/D copper stub pipe. Pressure drops across the terminal unit shall comply with clause 4.4.11 (four point four point one one) of BS EN ISO 9170-1 (B S E N I S O nine one seven zero dash one). The flow / pressure drop characteristics for the Gem terminal unit are shown below with the maximum allowable value. Complete data sheet of manufacturer to be provided to the engineer incharge before the product is supplied along with all certification required as per technical specs.Should have 4 Digit (four digit) CE marking

Supply, installation, testing and commissioning of Oxygen Flow Meter with Humidifier Bottle with CDSCO licence. 0–15 L/min (zero to fifteen litres per minute) standard flow rate. It should be manufactured in an ISO 13485:2003 (I S O one three four eight five : two zero zero three) quality management system duly certified, constructed in accordance with the requir

ement of international standard, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- AKTIV / Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon. Back Pressure Compensated flow meter for accurate gas flow measurement with following features: A) Control within a range of 0-15 LPM (zero to fifteen litres per minute). B) It should meet strict precision and durability standard. C) The flow meter body should be made of brass chrome plated materials. D) The flow tube and shroud components should be made of clear, impact resistant polycarbonate. E) Flow tube should have large and expanded 0-15 LPM (zero to fifteen litres per minute) range for improved readability at low flows. F) Inlet filter of stainless steel wire mesh to prevent entry of foreign particles G) The humidifier bottle is made of unbreakable & reusable polycarbonate /polysulfone/polypropylene material autoclavable at 121 degree (one hundred and twenty one degree) centigrade.

Supply, installation, testing and commissioning of medical air compressor shall fully comply with the requirements of the HTM 0201 / NFPA 99 / EN / DIN / ISO 73961 (HTM zero two zero one / NFPA ninety nine / EN / DIN / ISO seven three nine six one). Compressors shall be oil free / oil lubricated rotary screw compressors. The system shall be such that the supply is maintained in single fault condition. Standby compressors system capacity shall be accordingly as per the relevant standards. A test certificate shall be provided from the manufacturer for the compressors showing the results of the tests, including the free air flow rate obtained at normal working pressure. Compressor must comply as per ISO 73961 (I S O seven three nine six one). This declaration should be on manufacturer’s letter head which shows model no., article no. and states that proposed compressor is comply to ISO 73961 (I S O seven three nine six one). Each compressor should be minimum 15 KW / 20 HP (fifteen kilowatt / twenty horsepower) motor at pressure rating of 10 bar (ten bar) or more. FAD of each compressor 136.4 CFM (+/- 5% tolerance) (one hundred thirty six point four cubic feet per minute plus or minus five percent tolerance). Each compressor should be equipped with integrated PLC (programmable logic controller) having advanced monitoring, high definition color display with clear service and warning indications, easy remote monitoring through a simple Ethernet connection thanks to the built-in web server; monitoring features include new service and warning indications, error detection and compressor shutdown, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- Atlas Copco / Becon Medeas / Chicago Pneumatic / ELGI / Inasta Iwata.

Supply Installation and Testing commissioning of Oxygen, Air Receiver of Capacity 2000 Ltrs (two thousand litre) including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-B Tech / Aktive / HSIPL / Raj Med / Becon Medeas

Supply Installation and Testing commissioning of duplexed air purification module shall incorporate high efficiency water separators, oil coalescing filters, heatless regenerative desiccant dryers, activated carbon filters with optional hopcalite catalyst, bacterial filters and pressure regulators. The performance of the filters shall be according to below specifications:including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale ta

x Gst or other taxes as imposed by the Govt time to time where applicalble.make:-Aktiv / Trident / Becon Medeas / Atlas Copco / ELGI / AMICO / Greggorson

Oil coalescing two-in-one high efficiency filter: mass efficiency of 99.991% (ninety nine point nine nine one percent), tested according to ISO 8573-2 & ISO 12500-1 (I S O eight five seven three dash two and I S O one two five zero zero dash one). Activated carbon filter: maximum remaining total oil content of 0.003 mg/m³ (zero point zero zero three milligram per cubic metre), tested according to ISO 8573-5 & ISO 12500-2 (I S O eight five seven three dash five and I S O one two five zero zero dash two).

Bacterial filter: particle count efficiency of 99.98% (ninety nine point nine eight percent) at MPPS = 0.06 μm (zero point zero six micrometre), tested according to ISO 12500-3 (I S O one two five zero zero dash three). Contaminants in the delivered air downstream of the bacterial filters shall be maintained and air quality meet with accordant to European Pharmacopeia standard / Indian Pharmacopeia standard. The dryer controller should be touch screen and provide an intelligent human machine interface incorporating on-board flash memory and real-time clock for recording operational parameters in the event log. The central control system shall operate at low voltage and include BMS (building management system) connection for plant fault, plant emergency, reserve fault and pressure fault. The central control unit shall incorporate a user friendly 5” (five inch) high definition color touch screen display with clear pictograms and LED indicators, providing easy access to system operational information. Purification module should be equipped with integrated gas terminal units test point as per BS / DIN / NFPA 99 (B S / D I N / N F P A ninety nine). The central controller shall be equipped with the remote monitoring function via the cellular network. The dryer control system shall incorporate a purge saver energy management system that freezes the regeneration of the desiccant once adequate dew point is reached in the inactive tower. Only when the dew point level in the active tower deteriorates to an unacceptable level will the intelligent controller switch towers. The purification module should be European MDR certified under Class IIa (class two a) category from notified body. The dryer shall incorporate a dew point hygrometer with an accuracy of ±3°C (plus minus three degree Celsius) in the range 20 to 100°C (twenty to one hundred degree Celsius) atmospheric dew point and 4–20 mA (four to twenty milliampere) analogue output. Aluminium oxide or palladium wire sensors are not acceptable. An alarm condition shall trigger on the dryer control panel if the dew point exceeds a 46°C (forty six degree Celsius) atmospheric set point. The plant control unit shall display the dew point of the delivered air to enable monitoring of the air quality by the hospital’s estates department. Voltage-free contacts shall be included to enable the dew point alarm signal to be connected to a central medical gas alarm system and/or building management system (BMS). To enable periodic calibration of the dew point sensor element, the hygrometer shall be remotely connected downstream of the dryer via a microbore tube. It is not acceptable to install the sensor directly into the medical air supply pipeline.

Supply Installation and Testing commissioning of Duplex Pressure Reducing System including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-AKTIV / Raj Med / ANK / HSIPL

Supply Installation and Testing commissioning of Medical Air 4 Bar (four bar) Gas Outlets (specs same as Oxygen Outlets) including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Becon Medeas / Atlas Copco / Greggorson / Amico / Penlon

Supply, installation, testing and commissioning of Medical Vacuum System duplex medical vacuum system should comply with HTM 0201 / NFPA 99 / DIN / EN / ISO73961 (HTM zero two zero one / NFPA ninety nine / DIN / EN / ISO seven three nine six one) standards. It should be oil sealed rotary vane / oil lubricated screw type to produce minimum 185 CFM (+/- 5% tolerance) (one hundred eighty five cubic feet per minute plus or minus five percent tolerance) as primary and 185 CFM (+/- 5% tolerance) (one hundred eighty five cubic feet per minute plus or minus five percent tolerance) as standby. The vacuum plant shall comprise air-cooled, oil-lubricated rotary vane vacuum pumps with control panel suitable for both continuous and frequent start / stop operation at inlet vacuum levels between 500 mmHg and 660 mmHg (five hundred millimetre of mercury and six hundred sixty millimetre of mercury). The control system should normally employ automatic rotation of the lead pump to maximize pump life and ensure even wear

. Vacuum pump inlets shall include a wire mesh filter and integral non-return valve to prevent oil suck back and pressure increases in the vacuum system. Each vacuum pump shall be fitted with anti-vibration pads between the pump foot and mounting frame. The total system along with accessories should be skid mounted and from the single manufacturer, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident / Inesta Iwata / Ingersol Rand.

Supply Installation and Testing commissioning of vacuum receiver shall be as per MS IS 2825 standards (two thousand eight hundred and twenty five standards) and the same should be stamped /engraved with code no./lot no along with the test certification. Air Receiver shall be supplied with Auto drain Valve, Gaues, Safety Valve.including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-B Tech / Raj Med / HSIPL / Wed Med

Supply, installation, testing and commissioning of filters should be designed for removal of solid, liquid and bacterial contamination from the suction side of vacuum pump systems, preventing damage to the pump and the potential biological infection of the surrounding environment. The dryer should be particulate filter dryer with ability to remove particles as small as 1 micron (one micron). Each individual filter shall have the capacity to deliver full design flow such that one set is designated duty and the other will be standby. Bacteria filters shall have efficiency at least 99.999% (ninety nine point nine nine nine percent) when tested by the sodium flame method in accordance with BS 3928:1969 (B S three nine two eight : one nine six nine) / as per required standard utilizing particles in the 0.02 to 2 micron (zero point zero two to two micron) size range. The pressure drop across each clean filter at 50% (fifty percent) of the system design flow should not exceed 25 mm Hg (twenty five millimetre of mercury) (3 kPa) (three kilopascal) at a vacuum of 475 mm of Hg (four hundred seventy five millimetre of mercury) (63 kPa) (sixty three kilopascal). Bacteria filters shall be marked with the legend ‘BioHazard’. Each bacteria filter shall be provided with a transparent sterilizable collection jar to collect condensate, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- Aktiv / Trident / Becon Medeas / Atlas Copco / ELGI / Amico / Greggorson.

Supply Installation and Testing commissioning of Vacuum Gas Outlets (technical specifications same as oxygen outlet specs) including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:-Becon Medeas / Atlas Copco / Greggorson / Amico / Penlon

Supply Installation and Testing commissioning of Ward Vacuum Unit with Regulator, Collection Jar of 700 ml (seven hundred millilitre) with Bracket.including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make:-AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident

Supply Installation and Testing commissioning of Vacuum High Pressure Rubber tube Yellow color.including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Supply, installation, testing and commissioning of Nitrous Oxide Manifold (5+5) (five plus five). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201 / NFPA 99 / DIN / EN / ISO73961 (HTM zero two zero one / NFPA ninety nine / DIN / EN / ISO seven three nine six one) standards. It shall be compatible with Class D type bulk cylinders. Manifold shall consist of two (two) high pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224 (I S three two two four) / BS / ASME incorporating a check valve at the header connection. The high pressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar as

sembly shall be provided with a high pressure shut off valve. Nitrous manifold should consist of two (two) rows of respective numbers of Class D type bulk Nitrous cylinders. The manifold should be hydraulically tested to 3000 psig (three thousand pounds per square inch gauge). The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system should have non-return valves for easy changing of cylinders without closing the bank. The cylinder should be placed with the help of cylinder brackets and fixing chains which should be galvanized, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- AKTIV / Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon.

Supply, installation, testing and commissioning of Fully Automatic Nitrous Control Panel 2100 LPM @ 50 to 55 PSI (two thousand one hundred litres per minute at the rate fifty to fifty five pounds per square inch). The fully automatic control panel should comply with NFPA99 / HTM0201 / ISO73961 (NFPA ninety nine / HTM zero two zero one / ISO seven three nine six one) standard. It shall be fully automatic, including shifting to secondary bank when the service bank is exhausted, with automatic reset of replaced bank to primary status. Semi-automatic manifolds are not acceptable. The manifold control(s) shall incorporate: including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. Make:- AKTIV / Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon. a) Pressure transducer to actuate designated signals when service bank is exhausted. b) Visible display on control unit to determine when primary bank is exhausted, and the secondary bank is in operation. A continuously lit green indicator to indicate header in use. c) HMI touch Screen to indicate contents of each header. d) An amber indicator of header ready for the secondary header. A red indicator of header empty for each header. e) Display on HMI touch Screen for line pressure/Gas Flow in lpm/ FiO2 (FiO two). Manifold design shall ensure that the failure of any one component does not prevent continued supply of gas to patients. Manifolds design shall incorporate ed regulators for header switching and shall not require heaters for any gas. Alarm Manifold power supply shall be separate unit for ease of installation. Wiring between manifold and power supply shall be manufacturer supplied. Manifolds requiring electrical work inside the manifold cabinet during installation are not acceptable. Wiring shall terminate in power supply box not in manifold. Manifolds which can perform switching operations with electrical power are acceptable. The manifold panel should be compatible with Hospital BMS provides all relevant signals to be publish on Hospital BMS structure. Manifold Control Panel should have CDSCO license/ AMERICAN ETL/UL Listed or EU MDR/MDD certified from notified body having four digit notified number. With a Warranty of Years

Supply Installation and Testing commissioning of Emergency Nitrous Oxide Manifold (l x l). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201/NFPA 99/ DIN / EN / ISO73961 standards. It shall be compatible with ClassD type bulk cvlinders. Manifold shall consist of two high pressure header bar assemblies tol facilitate connection of primary and secondary cylinder supplies. Each header bar shall bel provided with respective numbers of cvlinder pigtail connections to, suit cylinder valves as per IS 3224/ BS ASME incorporating a check valve at the header connection. The highpressure lheader bar shall be designed in such a manner that it can be extended to facilitate additional! lcylinder connections. Each header bar assembly shall be provided with a high pressure shut off vave. Nitrous Manifold should consist of 2 rows of respective numbers of class Diype buc joxygen cylinders. The manifold should be bydraulically tested to 3000 psig. The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system |should have non - return valves for easy changing of cylinders without closing the bank. The icylinder should be placed with the hclp of cylinder brackets and fixing chains which should be galvanized. with piston operated regulator includirng designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll; |tax,saie tax Gst or other taxes as imposed by the Govt time to time vhere applicalble. make; AKTV /Raj Med / HSIPL | Becon Medeas / Greggorson/ Amico / Penlon

Supply Installation and Testing commissioning of Nitrous Oxide outlets and probes should be as specific and non- interchangeable. The gas outlets have heavy duty constituents and smooth connection and disconnection. The outlets must be labeled and color coded. CDSCO approval is must for both indian and imported outlets including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Becon Medeas / Atlas Copco / Greggorson / Amico / Penlon Medical gas terminal units consist of two parts First fix – the wall mounted assembly consists of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow 130 degrees (one hundred and thirty degrees) radial movement of the copper stub to align with the pipeline. The second fix plastic components shall be manufactured with the pin index permanently moulded into the gas specific socket. The socket assembly shall retain a capsule assembly, containing the check valve and probe ‘O’ ring seals. Second fix terminal units shall be supplied with the anti-rotation pin loose and bagged to be fitted as required. The socket is fixed to the base block with a design that insure profile is always in the correct position. Probes are gas specific con

nectors that couple to the medical gas terminal unit sockets to provide access to gas systems. The replaceable capsule assembly shall enable all working parts subject to wear through usage to be replaced as a factory tested assembly, thereby reducing maintenance time. Each termination block assembly shall be pressure tested by the pressure decay method. All screws, probe roller pins, locking springs and the anti-rotation pin shall be manufactured from stainless steel. The second fix assembly shall incorporate three injection moulded parts in fire-retardant nylon 66. (sixty six .) All wetted parts (except seals) shall be brass or copper. Copper stubs pipes shall be manufactured from phosphorous de-oxidised non-arsenical copper. All elastomeric seals shall be manufactured from Viton with a Shore hardness of 75. (seventy five .) All user accessible parts, 2nd (second) fix, gas ID ring, plaster box, trim plate and inks shall include Biomaster silver ion antimicrobial additive for inherent antimicrobial protection. Terminal units installed in walls, bedhead trunking, headwalls or f ixed pendants shall be connected to the pipeline with a copper stub pipe. Pressure gases and vacuum shall incorporate a 12mm (twelve millimetre ) O/D copper stub pipe. Pressure drops across the terminal unit shall comply with clause 4.4.11 of BS EN ISO 9170-1 (B S E N I S O nine one seven zero dash one). The flow/pressure drop characteristics for the Gem terminal unit are shown below with the maximum allowable value. Complete data sheet of manufacturer to be provided to the engineer incharge before the product is supplied along with all certification required as per technical specs. Should have 4 Digit (four digit) CE marking

Supply Installation and Testing commissioning of Distribution Copper Pipe : Llyod Company with Testing Certificate including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Mandev / Rajco / Maxflow / Nefton Copper pipe should be as per standard BS: EN 13348:2008 (B S E N one three three four eight colon two zero zero eight), solid drawn, seamless, deoxidized, non-arsenical, half hard (hard can be accepted only for sizes 54 mm (fifty four millimetre) or more), tempered and degreased copper pipe conforming to the standard. All copper pipes should be degreased and delivered capped at both ends. The pipes should be accompanied with manufacturer’s test certificate for the physical properties and chemical composition. Copper pipe must have reputed third party inspection certificate (for example Lloyd’s or TUV or SGS). Fittings should be made of copper and suitable for a working pressure of up to 17 bar (seventeen bar) and especially made for brazed socket type connections. The isolation valve body shall be made of chromium plated brass with non-lubricated ball type. All valves shall be pneumatically tested for twice the working pressure and factory degreased for medical gas service. Copper fittings should.comply with EN 1254:1 (E N one two five four colon one) factory degreased, and brazing filler metals should comply with EN 1044 (E N one zero four four). Fitting should be degreased and accordingly packed for medical use. Installation of piping shall be carried out with utmost cleanliness. Only pipes, fittings and valves that have been degreased and fittings shall be used at site. Pipe fixing clamps shall be of nonferrous or nondeteriorating plastic suitable for the diameter of the pipe. Inert gas welding technique should be used by passing oxygen Free Nitrogen Gas inside the copper pipes during silver brazing, in order to avoid carbon deposition inside the copper pipes. Only coppertocopper joints are permitted on site except threaded or flanged joints may be made where pipelines are connected to items such as valves and control equipment. No flux shall be used for joining Copper to Copper j

oints and on for joints made on site. The insides shall be clean and free from oxides and particulate matter and the minimum penetration of the brazing alloy at any point shall be three times the wall thickness of the tube. If the joints examined do not conform to these requirements, then adjacent joints shall be cut out and examined until the extent of faulty workmanship has been made good. Coppertobrass or gunmetal joints shall only be made under controlled conditions off site. The joints are ordinarily used to join short copper pipe tails to brass, gunmetal or bronze fittings to permit their connection into the pipeline. The subassemblies shall be degreased and individually sealed in bags or boxes before delivery to site. Adequate supports should be provided while laying pipelines to ensure that the pipes do not sag. Suitable sleeves shall be provided wherever pipes cross through walls / slabs. All pipe clamps shall be nonreactive to copper. After erection, the pipes are to be flushed with dry nitrogen gas and then pressure tested with dry nitrogen at a pressure equal to twice the working pressure or 150 psi (one hundred fifty pounds per square inch), whichever is higher, for a period of not less than 24 hours (twenty four hours). Length and quantity of individual items (Copper pipes, AVSUs, Alarm panels, Isolation valves, Outlets, pendants etc.) are mentioned. However quantity will be calculated and paid at actual. Bidder should quote unit price for all the items as detailed, Maximum interval between supports (Horizontal and Vertical), (12 mm pipe 1.5 m (twelve millimetre pipe one point five metre), 15 mm pipe 1.5 m (fifteen millimetre pipe one point five metre), 22 mm pipe 2 m (twenty two millimetre pipe two metre), 28 mm pipe 2 m (twenty eight millimetre pipe two metre), 35 mm pipe 2.5 m (thirty five millimetre pipe two point five metre), 42 mm pipe 2.5 m (forty two millimetre pipe two point five metre), 54 mm pipe 2.5 m (fifty four millimetre pipe two point five metre), 76 mm pipe 3 m (seventy six millimetre pipe three metre)) Painting, All the pipes from manifold/plant up to the outlets should be painted with two coats of synthetic enamel paint and colour codification should be as per standards followed and with consultation with competent authorities of the Institute. including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. With a Warranty of 5 Years (five years)

42 mm (forty two millimetre) OD x 1.2 mm (one point two millimetre) thick. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

35mm (thirty five millimetre) OD x 1mm (one millimetre) Thick. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

28 mm (twenty eight millimetre) OD x 0.9 mm (zero point nine millimetre) thick. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

22 mm (twenty two millimetre) OD x 0.9 mm (zero point nine millimetre) thick. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

15 mm (fifteen millimetre) OD x 0.9 mm (zero point nine millimetre) thick. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply, installation, testing and commissioning of Master Alarm should comply with NFPA99 / HTM0201 / ISO73961 (NFPA ninety nine / HTM zero two zero one / ISO seven three nine six one) standard. It should have CDSCO license / European CE certified from notified body having 4 digits (four digits) notified number / American ETL or UL or ATL listed. Master Alarm System panel shall be microprocessor based with individual microprocessors on each area display and sensor board. The sensors shall be capable of local or remote mounting. Each area display module / sensor unit shall be gas specific and with an error message display for an incorrect connection. Alarm should be compatible with hospital BMS facility. Master Alarm panel shall allow users to set up customized instructions for each alarm signal, to appear on the screen when the signal is in alarm. Alarm should have a touch screen interface on the alarm panel screen. Edit or incorporate user-defined

instructions into an emergency response plan by the hospital facility. Alarm should be capable of monitoring up to 32 (thirty two) local inputs. The alarms shall be field expandable with the facility for addition of extra modules up to six (six) services to be accommodated per standard box. A built-in web server in each panel allows a remote operator to display the alarm’s web page and view alarm signals, pressures, and other networked devices, including designing and petty purchase to complete the job with five year (five year) on-site replacement warranty. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make:- AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident. Each specific service shall be provided with numerical digital read comprising of 0250 psi (two hundred and fifty pound per square inch) for positive pressure and 030 inch (thirty inch) Hg for vacuum. The touch screen panel readout shall provide a constant indication of each service being measured. Minimum screen size should be 10 inches (ten inches) Touch Screen HMI Display. Each service indicating a green “NORMAL”, yellow “CAUTION” and a red “HIGH” or “LOW” alarm condition. If an alarm occurs, the “RED” alarm light will flash and an audible alarm will sound. Pushing the “ALARM SILENCE” button will cancel the audible alarm but the unit will remain in the alarm condition until the problem is rectified. The default set points shall be +/- 20% (+ / - twenty percent) variation from normal condition. In the calibration mode the following parameters shall be field adjustable: High/Low set points, Imperial /Metric Units, Repeat alarm enable/disable, Set points shall be adjustable by two on board push buttons. In addition, “PUSH TO TEST” & “ALARM SILENCE” buttons shall be easily accessible to operate and test the unit. Combination master/area alarms shall have no moving parts and shall require no maintenance after initial installation.• Medical Gas Pipeline plant room/manifold alarm system shall indicate the following, Manifold Main Bank Discharging O2 / N2O / CO2 / N2 (oxygen / nitrous oxide / carbon dioxide / nitrogen), MGPS header pressure Normal / Lo / Hi with digital read out. Medical Air System Primary Supply ON/OFF with digital read out. Medical Air Secondary System ON/OFF with digital read out. Medical Vacuum Primary System ON/OFF with digital read out, Medical Vacuum pump secondary system ON/OFF with digital read out. With a Warranty of 5 Years (five years)

Supply Installation and Testing commissioning of Area Service Valve Unit with HMI based touch screen Alarm (AVSU) with CDSCO licence including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make;-AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident It should fully comply with HTM0201 / NFPA99 / ISO73961 (HTM zero two zero one / NFPA ninety nine / ISO seven three nine six one). The Area Valve Service Unit (AVSU) should incorporate a ball valve with NIST connectors either side, mounted in a lockable box with emergency access. The valve should be complete with copper stub pipes that extend to the outside of the box to enable easy connections to the Medical Gas Pipeline System (MGPS). The valve should operate from fully closed to fully open with a quarter turn of the handle. It should be a full-bore valve for minimum pressure loss. It shall comprise a full-bore ball valve complete with copper stub pipes for ease of installation. The valves shall be connected to the copper stub pipes by means of union nut and nipple, allowing removal of the valve without the need to distort the pipe work. The valve will have a brass body, with a full-bore chrome plated brass ball. The valve shall operate from fully closed to fully open with a quarter turn of the handle. The stub pipes should have the appropriate coded NIST connectors fitted on one side of the valve. The valve box should have a universal back plate for first-fix mounting and a metal body cover which fits over the installed valve. A colour-coded service identity label will be fitted. The door should incorporate a quick-release mechanism for emergency access to the valve. It should be reliable and easy to operate and must have NIST connectors to facilitate easy purge, sample and pressure testing, and emergency supply system. It should be suitable for easy site installation with pre-fitted stub pipes. All break-access glass should be approved safety glass and not float glass. They should have break-glass emergency access fitted as standard and should have an optional quick-release emergency access system. The Area Valve Service Unit (AVSU) should incorporate a ball valve with NIST connectors on one side, mounted in a lockable box with emergency access. It should fully comply and meets with the requirements HTM0201/NFPA99/ ISO 73961; It should be capable of monitoring up to 2 gas or 3 gas or 4 gas or 5 gas or 6 gas services by means of pressure sensors that detect deviations from the normal operating limits. A single tamperproof fastener shall be used to gain access to the hinged door. The hinge shall operate through a minimum of 120° to provide adequate access. It should have each gas service

3 gases (2 Gas + 1 Vacuum) (three gases (two gas plus one vacuum)).The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

5 gas (4 gas = 1 vacuum) (five gas (four gas equals one vacuum)). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply Installation and Testing commissioning of Isolation Valve line valves: (DEGREASED FOR MEDICAL USE) including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident It should fully comply and meet with the HTM0201 / NFPA99 / ISO73961 (HTM zero two zero one slash NFPA ninety nine slash ISO seven three nine six one). Lockable line valves and should comprise fullbore ball valve complete with copper stub pipes for ease of installation. Valve connected to the copper stub pipes by means of flat faced unions fitted with nitrile Oring seals, allowing removal of the valve without the need to distort the pipe work. Stub pipes for valve up to 54 mm (fifty four millimetre) will be connected to the valve body using screwed connectors, while valve above this size will use flanged connectors. Valve Brass body, end cap and stem, with a full – bore chrome plated brass ball. Valve Operate from fully closed to fully open with a quarter turn of the handle. All line values Supplied with a mechanism to enable the unit to be locked in the fully closed or fully open position. Supplied with copper stub pipes for ease of installation using inert gas jointing procedures. ORing Seals on the valve stub allow gas tight capping at a spur for further expression.

15 MM. (fifteen millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

22 MM. (twenty two millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

28mm (twenty eight millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

35mm (thirty five millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

42mm (forty two millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply Installation and Testing commissioning of Surgical Airoutlets and probes should be as specific and non- interchangeable. The gas outlets have heavy duty constituents and smooth connection and disconnection. The outlets must be labeled and color coded. CDSCO approval is must for both indian and imported outlets ( Spec as Oxygen outlet )including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Becon Medeas / Atlas Copco / Greggorson / Amico / Penlon

Supply Installation and Testing commissioning of Single arm pendants with 330 rotation (three hundred and thirty rotation) should be quoted. It should have 5 gas (five gas) outlets, 4 electricity (four electricity) outlets, 1(one) shelf for 15" (fifteen inch) monitor and a weight bearing capacity of 15 Kgs (fifteen kgs) or more. The pendant should be sturdy and stable at all points of movement. including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Beacon Medeas, Greggersen, Penlon,dragger, Aktiv

`330° (three hundred thirty degrees) Utility console rotation - Utilitas C. 330° (three hundred thirty degrees) Utility console rotation + 330° (three hundred thirty degrees) Arm rotation Utilitas C1. High Payload. True Versatility. Flexible Solution. Effortless maneuverability. Optimum functionality. Easy access to console facia. Bedside safety. User-friendly positioning of Medical Devices. - All services integrated into the pendant system ensuring optimal safety. - Convenient positioning of gas, equipment, electrical and specialty services. - Service head ergonomics – Shelves / Monitor mounting solutions. - Hose connection - Gas specific NIST connectors. - Power supply - Low smoke halog

en cable through spiral conduit terminating at junction box. - Hygiene - Minimum visible screws, combined with smooth surfaces for easier cleaning and disinfection. - Configuration can be customized within the limits of applicable standards. - 220V (two hundred twenty volt) AC electrical socket - Four shutter type multi-standard sockets compatible to 5-6-10-13A (five-six-ten-thirteen ampere) plugs and three 16A (sixteen ampere) sockets will be provided. - Earthing - Protective Earth. - Body (Pendant) Alloy 6063 T6 (six zero six three T six): Extruded aluminium profile (T = not less than 2.5mm (two point five millimetre)). Suspension Assembly Pre-engineered Rust-proof (passivate) Trivalent Zinc plated (8-10µm (eight-ten micrometre)) steel. - Finish (Pendant) Epoxy coating to RAL 7035 (seven zero three five) (Textured). - SEEB (Optional) Plug and socket for Supplementary Equipotential Earth Bonding. - Mounting Complete mounting system with NIST connection for gas & vac services and terminals for power connection. - Communication Ports 1 (one) - RJ45 (RJ forty five) Data socket, 1 (one) - RJ11 (RJ eleven) Telephonic socket.`

Supply Installation and Testing commissioning of thearter suction Trolly including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-HSIPL, Rajmed, Wed Med, Aktive

H.P. antistatic rubber tube ( Air 4 (four)) SITC of CompressedairH.P. antistatic rubber tube, The highpressure tubeshouldbemadeofantistaticrubberas per ISO standards and colour coded, etc. complete as required.including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.

Supply Installation and Testing commissioning of Electrical panel With 3 Phase (three phase) Sequancer ( rectifier ) for a vacuum system and air compressor provides a centralized location for controlling and protecting these systems. It typically includes components like motor starters, circuit breakers, and control devices to manage power distribution, starting/stopping operations, and monitoring the status of the equipment according to Control System Engineers. including designing, petty purchase to complete the job with five year on site replacement warranty .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Hindustan Electrical, Right tech , Inovation tech, NG Solution, HSIPL

Comprehensive maintenance contract of whole Manifold gas pipe line system for five year on site replacement warranty including one year free warranty Note all materials should be replacement/repairing of defective spare parts own his cost . The Contractor/ authorised person shall be two visit monthy mandatory and if any breakdown occure the contractor should be attend the ccomplaint with 24 hours (twenty four hours) /minimum downtime.

SOLAR POWER GENERATION

`Supply, Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant 80 KWP (eighty kilowatt peak) conforming to MNRE specifications as amended, consisting of mono / poly crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on aluminium / GI (galvanized iron) structure of suitable strength with the following components complete as required: (a) Solar Photovoltaic Module of capacity 80 KWP (eighty kilowatt peak) or above, manufactured in India, conforming to IS 14286 / IEC 61215, IS / IEC 61730-Part-1, IS / IEC 61730-Part-2 (IS one four two eight six /IEC six one two one five /IEC six one seven three zero part two IS /IEC six one seven three zero part two). Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% (sixteen point five percent). PV modules used in solar power plants / systems must be warranted for their output peak watt capacity, which should not be less than 90% (ninety percent) at the end of ten years and 80% (eighty perce

nt) at the end of twenty-five years. (b) Power Conditioning Unit (PCU) of 350–800V DC (three hundred fifty to eight hundred volt direct current) input voltage range and 400V AC (four hundred volt alternating current), three phase, four wire, 50 Hz ±2.5 Hz (fifty hertz plus or minus two point five hertz) output voltage suitable to generate AC power with efficiency not less than 97% (ninety-seven percent), total harmonic distortion less than 3% (three percent) and suitable for ambient temperature from 0 to 50°C (zero to fifty degrees Celsius). The PCU shall adjust the voltage and frequency level to suit the grid voltage frequency. (c) Data monitoring system complete with accessories. (d) Fixing of array junction box and main junction box with IP65 (ingress protection sixty-five) protection and termination arrangement for incoming and outgoing cables along with glands, lugs, and other accessories as required. (e) Lightning and surge voltage protection. (f) Connections and interconnections by supplying and fixing required size XLPE insulated copper conductor 1.1 kV (one point one kilovolt) grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying and fixing of necessary channel / conduit lugs and other accessories as required. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Makes: SPV modules – Tata Power / Kirloskar Solar / Adani; PCUs (Inverters) – Delta / ABB / Fronius (MNRE approved); AC / DC distribution units – Siemens / ABB / Schneider Electric / Legrand; and other items as per OEM and BIS (Bureau of Indian Standards).`

VRV/VRF system

`Supply, Installation, Testing and Commissioning of top discharged modular type heat pump outdoor units, equipped with highly efficient scroll all-inverter compressor(s), special heat exchanger, Y-branch as required, outdoor unit MS (mild steel) stand, auto-check function for connection error, auto address setting, refrigerant temperature control, and capacity as mentioned below. VRV / VRF (Variable Refrigerant Volume / Variable Refrigerant Flow) system shall be suitable for working on 52°C (fifty-two degrees Celsius) ambient temperature, with refrigerant R-410A, refrigerant-cooled PCB (printed circuit board), automatic refrigerant charge function, and electrical component box shall be IP55 (ingress protection fifty-five) rated. The outdoor unit shall have external static pressure of 75 Pa (seventy-five pascal) or more to achieve installation flexibility. Unit price shall be inclusive of full charge of refrigerant gas and oil. The COP (coefficient of performance) shall be minimum 7.1 (seven point one) at 50% (fifty percent) load, at 35°C (thirty-five degrees Celsius) ambient temperature in cooling conditions, and energy efficiency requirement ISEER (as per IS 18728) (Indian Standard one eight seven two eight) shall be greater than 7.2 (seven point two). OEM shall submit original capacity charts for proof. The manufacturer of ODU (outdoor unit) and compressor shall be the same, i.e., the make of compressor shall be identical to that of the ODU. Nominal capacity in HP (horsepower) as stated below to complete the job including five-year (five-year) on-site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. The system shall be compatible with BMS (building management system), and the contractor shall submit shop drawings before starting the work. Make: O General / Mitsubishi / Daikin.`

Outdoor Unit - per HP. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

`DX AHU (Direct Expansion Air Handling Unit) compatible with VRV / VRF (Variable Refrigerant Volume / Variable Refrigerant Flow) DX ODU (Direct Expansion Outdoor Unit) for Operation Theatres. Supply, installation, testing, and commissioning of factory-fabricated double skin type Air Handling Units with two-tier construction and recovery wheel (BMS (Building Management System) compatible) for Operation Theatres as per specifications given below: AHU construction – It shall be made out of 0.8 mm (zero point eight millimetre) pre-coated galvanised steel sheet outside and 0.8 mm (zero point eight millimetre) plain steel sheet inside with 40 mm (forty millimetre) thick PUF (polyurethane foam) insulation factory-injected between them by injection moulding machine, with density not less than 40 kg/cum (forty kilogram per cubic metre). Drain pan made out of 1.2 mm (one point two millimetre) stainless steel (SS grade 304) sheet insulated with 19 mm (nineteen millimetre) thick closed cell insulation nitrile rubber with thermal break profile. Necessary foundation and anti-vibration pads shall be provided and the cost for the same shall be included in this item. Supply air stream – (1) Filter section consisting of pre-filter, fine fil

VRV/VRF system

Makes:Flatk,Citizen,Systemair

FM-AHU-10 TR (ten ton of refrigeration) / 3500 CFM (three thousand five hundred cubic feet per minute) | ESP 125 mm (one hundred and twenty five millimetre) + ISP as per OEM mm of W.C & 2600 CFM (two thousand six hundred cubic feet per minute) return/exhaust fan with 40 mm (forty millimetre) static pressure, DX Coil 1 Working + 1 SBY (one working plus one standby), the exhaust and inlet should have a heat recovery wheel for energy saving, Operation Theatre-1 (Operation Theatre one), to complete the job including five year (five year) on-site warranty, the rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable, the system shall be compatible with BMS.

FM-AHU-20 TR (twenty ton of refrigeration) / 6000 CFM (six thousand cubic feet per mi

nute) | ESP 125 mm (one hundred and twenty five millimetre) + ISP as per OEM mm of W.C & 4500 CFM (four thousand five hundred cubic feet per minute) return/exhaust fan with 40 mm (forty millimetre) static pressure, DX Coil 1 Working + 1 SBY (one working plus one standby), the exhaust and inlet should have a heat recovery wheel for energy saving, Operation Theatre-2 & Centralized OT (Operation Theatre two and Centralized Operation Theatre), to complete the job including five year (five year) on-site warranty, the rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable, the system shall be compatible with BMS.

FM-AHU- 10 TR (ten tonne of refrigeration) / 3500 CFM (three thousand five hundred cubic feet per minute) | ESP 65mm (sixty five millimetre) +ISP as per OEM mm of W.C. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

FM-AHU- 9 TR (nine tonne of refrigeration) / 2500 CFM (two thousand five hundred cubic feet per minute) | ESP 65mm (sixty five millimetre) +ISP as per OEM mm of W.C. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply, installing, testing and commissioning of Laminar Flow (LAF) system direct flow from ceiling to floor, the flow passing over head and upper body of surgeon and assistant made out of aluminium powder-coated made of 16 SWG (sixteen standard wire gauge) particle size retention of 0.3 mm (zero point three millimetre), plenum size 3'x6' (three feet into six feet) complete with HEPA filters of size 610x610x305 mm (six hundred and ten into six hundred and ten into three hundred and five millimetre) and SS perforated grilles having minimum 50% (fifty percent) perforation, entry of air to housing shall be from side, center of plenum shall be blanked off for lighting provisions, to complete the job including five year (five year) on-site warranty, the rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable, the system shall be compatible with BMS. Make :- Kynor / GS Enterprises / Thermadyni / Avonaire / Uniaire.

Supply, installing, testing and commissioning of IP55 (I P fifty five) Variable Frequency Drive (VFD) for AHU, the other specifications are (Ambient temp 50 Deg (fifty degree) without deration), 100 kA (one hundred kiloampere) SC rating with built-in BACnet, Metasys, Apogee protocols, 2 PIDs (two P I Ds), C2 Class EMI Filter for 1st Environment, 5% (five percent) Impedance DC Choke on both (+ve & -ve) limbs and should be able to reduce THDi<32% (thirty two percent) @100% (one hundred percent) load & THDi<35% (thirty five percent) @75% (seventy five percent) load with input PF>0.96 (power factor greater than zero point nine six) @50% (fifty percent) load as per IEC 61800-2 (I E C six one eight zero zero dash two) (valid third-party test report should be available to suffice this claim, own test report by manufacturer shall not be considered), VFD shall have inbuilt 5 line (five line) graphical & alpha-numeric LCD keypad (Power in kW (kilowatt), Energy in kWh (kilowatt-hour), Run time in hours & feedback signals in HVAC units viz WC (water column), PSI (pounds per square inch), GPM (gallons per minute), °F (degree Fahrenheit), ft3/min (cubic feet per minute), m3/h (cubic metre per hour), L/h (litre per hour), L/s (litre per second), bar (bar), Pa (pascal), °C (degree Celsius), M (metre), ft. (feet), L/min (litre per minute), m3/min (cubic metre per minute), “Hg (inch of mercury), kPa (kilopascal), %) along with Hand-Off-Auto keys & real-time clock with battery etc. as per specification complete as required to operate, 3.5 kW to 7.5 kW (three point five kilowatt to seven point five kilowatt), to complete the job including five year (five year) on-site warranty, the rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable, the system shall be compatible with BMS.

Supply, installation, testing and commissioning of 5 kWh (five kilowatt-hour) wall/floor mounted Humidifier shall be horizontal floor standing with casters, the tank shall be constructed out of 1.2 mm (one point two millimetre) thick SS-304 (stainless steel three zero four) sheet, control panel made out of 1.2 mm (one point two millimetre) thick CRCA sheet duly powder coated, the pan-type Humidifier shall have water filter membrane and air filter assembly, level switches for upper and lower water level, piezo transducers with low water level protection, solenoid operated water makeup/fill, drain valve, water overflow connection with valve, mist outlet point, power supply suitable for 1 Phase, 230 VAC +5% (one phase, two hundred and thirty volt alternating current plus five percent) regulated power supply up to 30 LPH (thirty litres per hour) and above 30 LPH (thirty litres per hour) suitable for 3 Phase, 415 VAC +5% (three phase, four hundred and fifteen volt alternating current plus five percent) electrical control panel for ultrasonic, to complete the job including five year (five year) on-site warranty, the rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable, the system shall be compatible with BMS.

Temperature and RH sensor and adjuster package.Supply, installation, testing and commissioning of latest generation digital display type BMS compatible thermostat / humidistat with controller for cool / heat application suitable for two/four pipe system & humidistat suitable for working with humidifier and dx coil control valves for various air handling Units. The thermostat shall have provision of setting of space temperature and display of the same. The humidistat shall have provis

ion of setting space RH and display of the same. The quoted price of thermostat / humidistat shall include the cost of 20mm (twenty millimetre) MS conduits, control cabling, MS Box etc. as required. The cost quoted shall be excluding the control valves and humidifier. It shall include all accessories ,mountings, wiring between thermostat & unit, terminations etc.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Makes-Honeywell,Siemens

ThermostatSupply, installation, testing and commissioning of automatic control for Units for pipe system (heating / cooling) consisting of modulating thermostat, which will have provision of setting of room temperature, setting offan speed (High, Medium, Low). The quoted price of thermostat shall include the cost of 20mm (twenty millimetre) MS conduits, control cabling, MS Box etc. as required. It shall include all accessories, mountings, wiring be tween thermost at & unit, terminations etc.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Makes-Honeywell,Siemens

SMAIN INTELLIGENT PROGRAMMABLE CENTRAL CONTROLLER:

Supply, Installation, Testing and Commissioning of Central Controller of digital type of latest generation suitable for all VRV/VRF equipments/AHU to operate, Monitor, Scheduling Programme, On/Off, Temperature Setting etc as per specification complete as required to operate all the indoor units. With BMS Compatible.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi Heavy Duty, Daikin

SITC for ODU Isolator for suitable capacity to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

Indoor Units : Hiwall Type

Supply, Installation, testing and commissioning of Hiwall Type Indoor units equipped with, Corded remote,pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet,insulation, pipe connections,variable evaporative temperature control etc. of various capacities as per specifications and drawings All indoor Units should have force shut option to connect with fire alarm or key card adaptor, so that the unit automatically stops in case of fire or key card removal.Sound level for all units is measured at 1.5m (one point five metre) below equipment in anechoic chamber. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi , Daikin

Hiwall Type Indoor Unit - 1.08 TR (one point zero eight tonne of refrigeration) Min 380cfm (three hundred and eighty cubic feet per minute) and sound level at max speed should be less than 39 dBA (thirty nine decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Hiwall Type Indoor Unit - 1.3 TR (one point three tonne of refrigeration) Min 450cfm (four hundred and fifty cubic feet per minute) and sound level at max speed should be less than 40 dBA (forty decibel A-weighted).The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Hiwall Type Indoor Unit - 1.65 TR (one point six five tonne of refrigeration) Min 520cfm (five hundred and twenty cubic feet per minute) and sound level at max speed should be less than 43 dBA (forty three decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

SITC for ODU Isolator for suitable capacity to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

Indoor Units : Hiwall Type

Supply, Installation, testing and commissioning of Hiwall Type Indoor units equipped with, Corded remote,pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet,insulation, pipe connections,variable evaporative temperature control etc. of various capacities as per specifications and drawings All indoor Units should have force shut option to connect with fire alarm or key card adaptor, so that the unit automatically stops in case of fire or key card removal.Sound level for all units is measured at 1.5m (one point five metre) below equipment in anechoic chamber. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi , Daikin

Hiwall Type Indoor Unit - 1.08 TR (one point zero eight tonne of refrigeration) Min 380cfm (three hundred and eighty cubic feet per minute) and sound level at max speed should be less than 39 dBA (thirty nine decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Hiwall Type Indoor Unit - 1.3 TR (one point three tonne of refrigeration) Min 450cfm (four hundred and fifty cubic feet per minute) and sound level at max speed should be less than 40 dBA (forty decibel A-weighted).The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Hiwall Type Indoor Unit - 2.08 TR (two point zero eight tonne of refrigeration) min 660 cfm (six hundred and sixty cubic feet per minute) and sound level at max speed should be less than 48 dBA (forty eight decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Indoor Units : Round Flow Cassette/4 way (four way) Cassette Type

Supply, Installation, testing and commissioning of Cassette Type Indoor units equipped with,corded remote, pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, factory fitted drain pump, insulation, pipe connections, all 4 louvers (four louvers) shall be independently controtrollable, variable evaporative temperature control etc. of various capacities as per specifications and drawings.The cassette should be installed with sensing panel which is able to detect the presence of people and floor temperature to provide comfort and energy savings. All indoor Units should have force shut option to connect with fire alarm or key card adaptor, so that the unit automatically stops in case of fire or key card removal.Sound level for all units is measured at 1.5m (one point five metre) below equipment in anechoic chamber. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi, Daikin

Cassette Type Indoor Unit - 1.08 TR (one point zero eight tonne of refrigeration) Min 450cfm (four hundred and fifty cubic feet per minute) and sound level at max speed should be less than 31 dB (thirty one decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Cassette Type Indoor Unit - 1.65 TR (one point six five tonne of refrigeration) Min 810cfm (eight hundred and ten cubic feet per minute) and sound level at max speed should be less than 39 dB (thirty nine decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Cassette Type Indoor Unit - 2.08 TR (two point zero eight tonne of refrigeration) Min 820cfm (eight hundred and twenty cubic feet per minute) and sound level at max speed should be less than 39 dBA (thirty nine decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Cassette Type Indoor Unit - 2.65 TR (two point six five tonne of refrigeration) Min 860cfm (eight hundred and sixty cubic feet per minute) and sound level at max speed should be less than 40 dBA (forty decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Cassette Type Indoor Unit - 3.3 TR (three point three tonne of refrigeration) Min 1180cfm (one thousand one hundred and eighty cubic feet per minute) and sound level at max speed should be less than 45 Dba (forty five decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Cassette Type Indoor Unit - 4.1 TR (four point one tonne of refrigeration) Min 1210cfm (one thousand two hundred and ten cubic feet per minute) and sound level at max speed should be less than 46

Dba (forty six decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Cassette Type Indoor Unit - 4.6 TR (four point six tonne of refrigeration) Min 1250cfm (one thousand two hundred and fifty cubic feet per minute) and sound level at max speed should be less than 47 Dba (forty seven decibel A-weighted). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply, Installation, testing and commissioning of Ductable Type Indoor units equipped with, Corded remote,pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet,insulation, pipe connections,variable evaporative temperature control etc. of various capacities as per specifications and drawings All indoor Units should have force shut option to connect with fire alarm or key card adaptor, so that the unit automatically stops in case of fire or key card removal.Sound level for all units is measured at 1.5m (one point five metre) below equipment in anechoic chamber. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi, Daikin

Ductable Type Indoor Unit - 1.6 TR (one point six tonne of refrigeration) Min 630cfm (six hundred and thirty cubic feet per minute) and sound level at max speed should be less than 42 dB (forty two decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ductable Type Indoor Unit - 2.08 TR (two point zero eight tonne of refrigeration) Min 680cfm (six hundred and eighty cubic feet per minute) and sound level at max speed should be less than 43 dB (forty three decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ductable Type Indoor Unit - 2.6 TR (two point six tonne of refrigeration) Min 880cfm (eight hundred and eighty cubic feet per minute) and sound level at max speed should be less than 44 dB (forty four decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ductable Type Indoor Unit - 3.2 TR (three point two tonne of refrigeration) Min 1120cfm (one thousand one hundred and twenty cubic feet per minute) and sound level at max speed should be less than 44 dB (forty four decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ductable Type Indoor Unit - 4.1 TR (four point one tonne of refrigeration) Min 1370cfm (one thousand three hundred and seventy cubic feet per minute) and sound level at max speed should be less than 45 dB (forty five decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ductable Type Indoor Unit - 4.6 TR (four point six tonne of refrigeration) Min 1620cfm (one thousand six hundred and twenty cubic feet per minute) and sound level at max speed should be less than 47 dB (forty seven decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ductable Type Indoor Unit - 5.4 TR (five point four tonne of refrigeration) Min 2040cfm (two thousand forty cubic feet per minute) and sound level at max speed should be less than 46 dB (forty six decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ductable Type Indoor Unit - 6.6 TR (six point six tonne of refrigeration) Min 2390cfm (two thousand three hundred and ninety cubic feet per minute) and sound level at max speed should be less than 48 dB (forty eight decibel). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply installation testing and commissioning of AHU Kit for AHU which shall be supplied with necessary expansion kit and control box with wired remote to connect with VRVoutdoor units.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi , Daikin

Supply installation testing and commissioning of Refnets/Headers of required size as suggested by OEM to connect indoor units.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi, Daikin

Supply installation testing and commissioning of ODU Connecting kit of required size as suggested by OEM .to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi , Daikin

Supply installation testing and commissioning of 3 star (three star) inverter type split air conditioner cooling only with 100% (one hundred percent) copper condenser,refrigerant charged including MS stand of below capacity.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make : O General, Mitsubishi , Daikin

1.5TR (one point five tonne of refrigeration) Inverter Split AC. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

1.0TR (one point zero tonne of refrigeration) Inverter Split AC. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Drain Piping:

SITC of PVC (Minimum 15 Kg/Sqcm (fifteen kilogram per square centimetre) pressure rated) drain water piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete, nominal diameters of pipes in mm (millimetre) as indicated below, to complete the job including five year (five year) on-site warranty, the rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable, the system shall be compatible with BMS. Make :- Supreme / Prince / Finolex.

25 mm (twenty five millimetre) ( with 9 mm (nine millimetre) Class- O XLPE). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

32 mm (thirty two millimetre)( with 9 mm (nine millimetre) Class- O XLPE). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

40 mm(forty millimetre) ( with 9 mm (nine millimetre) Class- O XLPE). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

50 mm (fifty millimetre) ( with 9 mm (nine millimetre) Class- O XLPE). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Copper Refrigerant Piping with Insulation for VRV & Split System:

SITC of Copper Refrigerant piping for VRV / VRF & Split System complete with fittings, supports, jointing, insulation with class O -XLP

E , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below .to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Maxflow/Rajco/Mandev/Jobu/Hariom

41.3 (forty one point three) (with 19 mm (nineteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supply, Installation, Testing and Commissioning of Patch Cord 1 Mtr (one metre). TIA/EIA 568C.2 standard (T I A slash E I A five six eight C point two standard). 24 AWG, multi-strands (twenty four A W G, multi-strands). Conductor metal made from bare copper. Insulation material: High Density Polyethylene. Patch cord jacket LSZH. Conductor size: 24-26 AWG stranded bare copper (twenty four to twenty six A W G stranded bare copper). Jacket: FR-PVC. Mechanical Characteristics – Plug: Operating life minimum 750 insertion cycles (minimum seven hundred and fifty insertion cycles). Contact blade: Copper alloy. Contact plating: 03 Mµ” Gold (zero three microinch gold). Electrical Characteristics – Plug: Dielectric withstanding voltage 1000 VDC or 700 VAC (one thousand volt direct current or seven hundred volt alternating current). Insulation resistance >500 MegaOhms @ 1000V DC/min (greater than five hundred megaohms at one thousand volt direct current per minute). Operating temperature -20° C to 75° C (minus twenty degree Celsius to seventy five degree Celsius). Clear polycarbonate for RJ-45 and clear PVC for boot material. Factory molded boot. RJ-45 standards: ISO/IEC 60603-7-4 and FCC 47 part 68 (I S O slash I E C six zero six zero three dash seven dash four and F C C four seven part six eight). UL Application: PC UL94-V-0 (P C U L nine four V dash zero). UL Listed and ETL Listed certified. Patch cord plug gold plated. Contact blade of plug made from copper alloy. Insertion cycle 750 times (seven hundred and fifty times). Temperature range should support from 10° C to 60° C (ten degree Celsius to sixty degree Celsius). Vertical flame propagation IEC 60332-1-2 (I E C six zero three three two dash one dash two). Acid Gas Emission Test – IEC 60754-1 & 2 (I E C six zero seven five four dash one and two). Smoke Density Test – IEC 61034-2 (I E C six one zero three four dash two). Including petty purchase to complete the job with five-year replacement warranty on site (five-year replacement warranty on site). All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Government from time to time where applicable. Make :- D-Link / Belden / Panduit / Commscope.

34.9 (thirty four point nine) (with 19 mm (nineteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

31.8 (thirty one point eight) (with 19 mm (nineteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

28.6 (twenty eight point six) (with 19 mm (nineteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

25.4 (twenty five point four) (with 19 mm (nineteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

22.2 (twenty two point two) (with 19 mm (nineteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

19.1 (nineteen point one) (with 13 mm (thirteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

15.9 (fifteen point nine) (with 13 mm (thirteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

12.7 (twelve point seven) (with 13 mm (thirteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

9.5 (nine point five) (with 13 mm (thirteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

6.4 (six point four) (with 13 mm (thirteen millimetre) insulation). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

CONTROL CABLING

Providing & fixing control cum transmission wiring of 2 core (two core) x 1.5 sqmm (one point five square millimetre) copper in suitable conduits between indoor units and outdoor units and indoor units and remote controllers.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Havells/Finolex/Polycab

Ducting for Ots

Supplying, Installation, Testing and Commissioning of aluminium ducting material as per technical specifications and drawings complete with all fitting, accessories, dampers, vanes, take offs, canvas connections transformation. The rate shall include suspension and supporting arrangement with angle iron and dash fasteners. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Tata/Sail

22 Gauge (twenty two gauge). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

20 Gauge (twenty gauge). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Ducting for Non OT Areas

Supplying, Installation, Testing and Commissioning of GI ducting material as per technical specifications and drawings complete with all fitting, accessories, dampers, vanes, take offs, canvas connections transformation. The rate shall include suspension and supporting arrangement with angle iron and dash fasteners. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Tata/Sail

24 Gauge (twenty four gauge). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

20 Gauge (twenty gauge). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Grills and Diffsuers

Extruded Aluminium powder coated supply air linear grills without volume control dampers and mounting frame.finished in approved shade and defuser.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

Supplying, fixing, testing and commissioning of Anodised black aluminium volume controls dampers for supply air as per drawing and specifications to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

Supplying, fixing testing and commissioning of Fire Dampers as per Fire rating standards made of GI sheet metal as per drawing and specifications to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

Supplying, installing and testing of extruded aluminium Air louvers with bird screen in accordance with approved shop drawings and specifications complete as required.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make:Kraft,Mapro,Carryaire,Pineaire

SITC of Actuator for fire damper to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

Supply & Erection of 19 mm (nineteen millimetre) thick nitrile duct insulation with Aluminium foil. The thermal insulation shall be 25 mm (twenty five millimetre) thick non-fibrous, fire retardant, closed cell, tri- dimensional chemically crosslinked polythylene foam, confirming to class O' for fire propagation and class 1(one) for surface spread of flame & factory laminated aluminum foil complete all as specified and directed.to complete the job including five year on site warranty. The rates

are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Aflex,Kflex,Armacell

SITC of Acoustic insulation of initial part of supply air ducting with 15 mm (fifteen millimetre) thick open cell class 0 (zero) insulation to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Aflex,Kflex,Armacell

Canvass Connection

Supply, installation, testing and commissioning of fire retarded Poreless canvass for outlet connection of the AHUs to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

Supply, laying, testing and commissioning of Power cabling XLPE insulated, PVC sheathed, armoured, copper conductor of 1.1 KV (one point one kilovolts) grade on cable trays.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Havells/Finolex/Polycab

4C (four c) x 10 Sqmm (ten square millimetre) Copper. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

4C (four c) x 6 Sqmm (six square millimetre) Copper. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

4C (four c) x 1.5 Sqmm (one point five square millimetre) Copper. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

3C (three c) x 2.5 Sqmm (two point five square millimetre) Copper. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

3C (three c) x 1.5 Sqmm (one point five square millimetre) Copper. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and making cable end termination complete with brass compression gland, crimping thimbles for PVC sheathed aluminium /copper conductor cable of 1.1 KV (one point one kv) grade of the under noted sizes as required.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS . Make: Havells/Finolex/Polycab

Supply and fixing of perforated of indicated thick CRCA GI perforated cable tray painted of required colour, of following sizes complete with bends/tee joints, coupling plate & nuts bolts etc. including Supporting structure as per s

pecification complete as required.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

200mm (two hundred millimetre) wide & 50mm (fifty millimetre) deep. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

300mm (three hundred millimetre) wide & 50mm (fifty millimetre) deep. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 6 SWG (six swg) dia G.I. wire on surface or in recess for loop earthing as required.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble The system shall be compatible with BMS .

GI Strip 25x3 mm (twenty five into three millimetre). The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

M&L for Earthing complete with Galvanised steel earth plate electrode of size 600x600x6 mm (six hundred into six hundred into six millimetre) thick buried directly in ground with earth pit not less than 3.25 meter (three point two five metre) deep below ground level with top edge of plate not less than 2.5 meter (two point five metre) below normal ground level connected to galvanised iron strip 25x4 mm (twenty five into four millimetre) as earth lead strip by means of nuts, bolts, check nuts, washers of galvanized iron as steel all as shown electrical plate No 3 (number three) connected to earthing test point all as specified or indicated including testing on completion, surrounded from all sides by mixture of charcoal and common salt and electrode by means of steel and GI pipe light grade 20 mm (twenty millimetre) bore dia bore for watering funnel with wire mesh, CI cover with frame, PCC chamber pit with PCC 1:3:6 (one is to three is to six) type C-2 (type C dash two) excavation and earth work all as shown in electrical plate No 3 (number three) connected to earthing test point all as specified. NOTE : 1. The unit rate includes for protection GI pipe of 40 mm (forty millimetre) and watering pipe of 20 mm (twenty millimetre) bore including excavation for earth pit in any type of soil/disintegrate rock. 2. Contractor has to bring agriculture soil from outside of defence land and fill in earth pit to achieve desired result as the soil resistivity is very high. 3. The cost of GI strip of 25x4 (twenty five into four) from top of earth plate upto 7.5 meter (seven point five metre) above ground level is deemed to be included in the unit rate. 4. All the joints in GI strip and connection with earth plate to be welded through brazing and in addition by providing double brass nut bolt and washer. 5. Costing of welding and nut bolts are deemed to be included in the unit rate to complete the job including five year (five year) on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi, royalty, malkana, toll tax, sale tax, GST or other taxes as imposed by the Govt time to time where applicable. The system shall be compatible with BMS..

Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive services mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble . Comprehensive Annual maintenance contract 2nd (second) year after one year warranty period.

Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive services mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble . Comprehensive Annual maintenance contract for 3rd (thiurd) year

Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive servi

ces mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble . Comprehensive Annual maintenance contract for 4th (four th) year

Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive services mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Comprehensive Annual maintenance contract for fifth year

DG SETS

Providing, installing, testing and commissioning of 'silent type' diesel generating set having prime power rating of 1010 kVA (one thousand ten kva), 415V (four hundred and fifteen volt) at 1500 RPM (one thousand five hundred rpm), 0.8 lagging (zero point eight lagging) power factor at 415V (four hundred and fifteen volt) suitable for 50Hz (fifty Hertz), 3 phase (three phase) system & for 0.85 load (zero point eight five load) factor and consisting of the following: (Rate shall include the testing of DG set at factory using resistive load for 12Hrs (twelve hours) at full load and further 1 hour (one hour) at 10 % (ten percent) over load) Note: DG set shall be compatible for synchronization, parallel operation and also compatible for BMS integration. Specification, terms and conditions of the tender documents has to considered while quoting rate. Nothing extra shall be payable.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .

Diesel Engine:

Diesel engine 4 stroke (four stroke) liquid cooled, electric start, of suitable BHP at 1500 RPM (one thousand five hundred revolutions per minute) suitable for above output of alternator at 40 degree C (forty degree Celsius), 50% RH (fifty percent relative humidity) & at 1000 m MSL (one thousand metre mean sea level) and conforming to BS649 (B S six four nine), IS10000 (I S ten thousand), capable of taking 10% (ten percent) overloading for one hour after 12 hours (twelve hours) of continuous operation. The engine will be fitted complete with all the required accessories. (The engine shall conform to latest CPCB norms and specifications amended up-to-date) Engine mounted instrument panel fitted with and having digital display for following: Start-stop switch with key, coolant temperature indication, lubrication oil pressure indication. Make :- Cummins / Caterpillar / VOLVO / Mitsubishi / Kirloskar.

Lubrication oil temperature indication. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Battery charging indication. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

RPM indication Over speed indication Low lub. Oil trip indication. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Engine hours indication. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Alternator :

Synchronous alternator rated at 1010 kVA (one thousand ten kilovolt-ampere), 415 V (four hundred and fifteen volt) at 1500 RPM (one thousand five hundred revolutions per minute), 3 phase (three phase) 50 Hz (fifty hertz) AC supply with 0.8 (zero point eight) lagging power factor at 40 degree C (forty degree Celsius), 50% RH (fifty percent relative humidity) & at 1000 m MSL (one thousand metre mean sea level). The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS:4722 (I S four seven two two) / BIS 2613 (B I S two six one three) suitable for tropical conditions and with class-F/H insulation. Make :- Kirloskar / Siemens / GEC / Stamford / Leroy Somer.

Acoustic Encloure Base Frame & Foundation:

Both the engine and alternator shall be mounted on suitable base frame made of MS channel necessary reinforcement which shall be installed on existing surface and vibration isolation arrangement as per recommendations of manufacturer. PCC foundation (M 20 Grade (M twenty grade)) of suitable size shall be provided as per CPWD specification. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Fuel Tank:

Daily service fuel tank of 990 litres (nine hundred ninety litres) (as per OEM) capacity fabricated out of 3mm (three millimetre) thick MS sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia. complete with valves, level indications & accessories as required as per specifications.Exhaust System Dry exhaust manifold with hospital exhaust silencer and catalytic converter.

Starting system

12V/24V (twelve volts/twenty four volts) DC starting system comprising of starter motors, voltage regulator and arrangement for initial excitation complete with suitable nos of batteries as per OEM recommendation. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Enclosure Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specification. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Electrical controls

ergy analyser unit to indicate current, voltage, frequency, power factor and KWH - 1 No.e (one no.e))1600 A (one thousand six hundred ampere) Four pole Air circuit breaker.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .