SPL REPAIR, REPLACEMENT, IMPROVEMENT OF WATER SUPPLY SYSTEM AT VNC AND SF AREA UNDER GE CENTRAL BANGALORE

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of GI/CI pipe lines etc getting out including forming bottom surface to required level and gradient in hard/dense soil.

Returning and filling in excavated soil including spreading leveling, watering, well ramming in layers not exc 25 cm thick complete.

Removing of excavated materials not exceeding 50 Mtrs and depositing where directed by Engr- in-Charge at a level not exceeding 1.5 Mtrs above the starting point.

Taking up or down steel water GI tubing and connections including cleaning for Relaying / refixing of old steel tubing and connection including gun metal gate valves in new or old position including necessary cuttings, threating and new fittings such as bends, elbows, sockets, nipples, tappers and reducers etc all as directed by Engr-in-Charge for the following sizes :- 15 mm dia bore

20mm dia bore

25mm dia bore

40mm dia bore

50mm dia bore

Supply GI tubing medium grade galvanised with all fittings to fixed to walls/ceiling or laying in trenches / floors including necessary cuttings, threading and fixing new fittings such as bends,elbows,sockets, nipples,tappers and all reducers for making branch connections etc all as directed for the following sizes:- Note : Earth work shall be measured and paid seperately Bore of pipe 15 mm

Bore of pipe 20mm

Bore of pipe 25mm

Bore of pipe 40mm

Bore of pipe 50mm

Taking up or down unserviceable GI tubing/any type of pipe from the wall/floor/trenches. Bore of pipe 15 mm

Bore of pipe 20mm

Bore of pipe 25mm

Bore of pipe 40mm

Bore of pipe 50mm

S/ F Gun metal gate valves with iron wheel head screwed both ends for galvanised iron pipe of following sizes, including taking out old unserviceable gate valves (if neccessory done in position with out taking down) etc all as directed for the following sizes :- 20mm

S/ F Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for following bore of pipe including taking out old unserviceable float valves Make : PRAYAG/POLYTUF/Leader 15mm

Drilling and taping in GI or CI/DI water mains (in position) for branch connections of the internal dia :- 15 mm bore

20 mm bore

Cutting the existing bituminous/WBM road/PCC hard standings to size not exc 45cm wide and depth not less than 45cm with average depth of 70cm for passing of pipe line any size, returning and filling in, watering, well ramming in layers and making good to the surfaces of road with PCC 1:3:6 using 20mm graded stone aggregate for the full width and 15cm thick all as directed

Providing trenchless bore using mechanical numatic drilling equipment for passing water main/pipe line upto 100mm bore under the existing bituminous/WBM road/PCC hard standing, depth range not less than 1.0m and upto 1.5 m and making good to the disturbed surfaces of road to match with it's existing specifications all as specified and directed by Eng-in-Charge at site. Note : - Quoted rate shall deemed to be inclusive of transportation of Drilling machine, connected accessories and passing pipe through bore complete with required accessories.

Supply and Laying Ductile iron socket & spigot pipes, conforming to IS-8329-2000 class K-7 100 mm bore in size, ISI marked with spigot and socket ends for elastomeric gasket rubber at one end and other end plain push on type in any length laid in trenches including testing on completion and including taking out old pipes any size. Make : JINDAL/TATA Pipes/ ELECTRO STEEL. Note : (i) CI/DI specials are measured and paid separately under respective item. (ii) Eexcavation and earthwork will be measured and paid separately under respective item.

M&L for rubber gasket (push on) joint of same make of DI pipe having two sections of different hardness for DI pipe spigot and socketed ends and fittings of size 100mm dia complete all as specified and directed by Engr-in-charge.

M&L for CI/DI fittings for spigot and socket pipes such as bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decresing or double socket etc) Tee pieces single branch, cross (all socket or socket & spigot, collars, caps and plugs for jointing upto 100mm bore DI pipe complete all as specified and directed.

M&L for CI/DI fittings for flanged pipes such as Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but one end flanged for jointing upto 150mm dia bore CI/DI pipe complete all as specified and directed.

M&L for run lead joint for CI pipe/DI pipe including spun yarn etc for spigot & socket pipes and fitiings for the following bore of pipe up to 150 mm dia bore.

M&L for CI/DI fittings for flanged pipes connectiong pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, for jointing upto 150mm dia bore CI pipe complete all as specified and directed.

Material and labour for repacking stuffing box of sluice valve spindle including taking apart and reassembling all as directed for the following sizes:- 80 mm bore

100 mm bore

Supply and fixing in CI heavy duty Sluice Valve conforming IS-780 class pressure type PN 1.6 ISI marked, 100mm borre non raising type with drilled flanged ends, stainless steel spindle with gun metal working parts with hand wheel,, including suitable flanged joints, Nut/Bolt & Washers etc and disconnecting and removing of unsv sluice valves from the existing pipe line/ valve chamber etc:-

Supply and fixing in CI heavy duty Sluice Valve conforming IS-780 class pressure type PN 1.6 ISI marked, 150mm borre non raising type with drilled flanged ends, stainless steel spindle with gun metal working parts with hand wheel,, including suitable flanged joints, Nut/Bolt & Washers etc and disconnecting and removing of unsv sluice valves from the existing pipe line/ valve chamber etc:-

Material & Labour for preparation of old surfaces and painting with syntheic enamel paint each coat on steel and iron surfaces of any description, over 10cm in width or grith otherwise descriped and all as directed.

Material & Labour for preparation of old surfaces and painting with black japan paint each coat on steel and iron surfaces of any description, over 10cm in width or grith otherwise descriped and all as directed.

Demolition of existing old unserviceable brick masonry valve chamber of any description and construction of brick masonary valve chamber of inner dimentions 100Cmx100Cmx100cm with 23 cm thick brick masonary wall in CM 1:6, PCC base in 1:3:6 type C1 using 20mm graded crushed stone aggregate of 7.5cm thick, plastering 15mm thick in CM 1:4 both inner & outer face of brick masonary, 7.5 cm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) copping, angle iron frame 50x50x6 mm size with 3mm thick MS sheet chamber cover Single/Double opening arragnment with lock system, all as directed including painting the steel surface with two coats of first quality synthetic enamel paint over a coat of red oxide primer after necessary preparation of surface complete all as specified and as directed

S&F Cast iron air release valves with two air outlets of size 100 mm dia bore and fixing up in ductile/cast iron water supply mains of size 100 mm dia complete all as specified and as directed.

Atom Engineers and Builders

M/S Bhagyawanticonstruction

LITE SYSTEMS INDUS