Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC | ₹7.2 L | L1 | Accepted-AOC first lowest bidder |
| 2 | L2₹7.4 LRejected-AOC | ₹7.4 L | L2 | Rejected-AOC second lowest bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Documents are not submitted as per tender condition |
| Sl No | Description | Qty | Unit | RAZVI ENTERPRISES L2 | SHREE HERAMB CORPORATION L1 |
|---|---|---|---|---|---|
| 1.00Providing & fixing of M.S. Grill with allied work at LMO tank of Dr. R. N. Cooper Mun. Gen. Hospital. | |||||
| 1.01 | Providing and Fixing MS Safety grill of weight specified below for windows as per design including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed. Grill weighing 25 to 30 kg / sqm | 145.06 | Sqm | 4,400.2 ₹6.4 L | 4,310.4 ₹6.3 L |
| 1.02 | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. | 0.38 | MT | 89,058.48 ₹33,842.22 | 87,240.96 ₹33,151.57 |
| 1.03 | Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge | 0.26 | MT | 85,008.14 ₹22,102.12 | 83,273.28 ₹21,651.05 |
| 1.04 | Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. | 0.13 | MT | 90,672.54 ₹11,787.43 | 88,822.08 ₹11,546.87 |
| 1.05 | Providing, detailing, and fabricating as per specifications, transporting to site and erecting M.S. ladder using hot rolled sections, hollow pipes (Hollow pipes conforming to IS 1239 part 1 and 2) including, fixtures and fastenings, cleats, stiffeners, gussets, etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding, removing the welding burr, cleaning etc., fixing in cement concrete block of grade M15, and preparing surface, applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of synthetic enamel paint after erection, with approved colour, shade and brand etc. complete as directed by Engineer In Charge | 82.77 | KG | 145.04 ₹12,004.96 | 142.08 ₹11,759.96 |
| 1.06 | Foundations, footings, bases of columns, rafts, pilecap | 0.23 | Cum | 6,914.88 ₹1,590.42 | 6,773.76 ₹1,557.97 |
| 1.07 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 15 mm nominal outer dia Pipes | 7.61 | Rmtr | 212.66 ₹1,618.34 | 208.32 ₹1,585.32 |
| 1.08 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 25 mm nominal outer dia Pipes | 7.61 | Rmtr | 306.74 ₹2,334.29 | 300.48 ₹2,286.65 |
| 1.09 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, | 2 | Nos | 183.26 ₹366.52 | 179.52 ₹359.04 |
Tender Value
Refer Docs
EMD Value
₹8,900
Closing Date
14 Oct 2025, 4:00 pmClosed
Dean Dr. R. N. Cooper Mun. Gen. Hospital
Dr. R. N. Cooper Mun. Gen. Hospital
Providing and fixing of M.S. Grill with allied work at LMO tank of Dr. R. N. Cooper Mun. Gen. Hospital.
2025_MCGM_1223117_1
HO/121/RNCH/DTD. 03.05.2025
Open Tender
Metal Fabrication
30 days
Dr. R. N. Cooper Mun. Gen. Hospital. Vile Parle W
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,714
₹8,900
13 May 2026
7 Oct 2025
15 Oct 2025
7 Oct 2025
14 Oct 2025
7 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
SBD.pdf
Tender Documents • 3.61 MB
BOQ_2114307.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid