Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹86.2 LAccepted-AOC 7 11 1 BROJONATH LAHIRI BISHNUPUR SOUTH 24 PGS WEST BENGAL 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L1 | Accepted-AOC QUOTED RATE LOWEST AND REASONABLE. | |
| 2 | L2₹87.7 L+₹14,392 (0.16%)Rejected-Finance 244 22 ONKAR NAGAR B TRI NAGAR TRI NAGAR NEW DELHI 110035 NORTH WEST DELHI DELHI 110035 INDIA | NORTH WEST DELHI | DELHI | 110035 | L2 | Rejected-Finance QUOTED RATE NOT LOWEST | |
| 3 | L3₹88.0 L+₹43,314 (0.49%)Rejected-Finance 71 GOLA MAHAL SADAR BAZAR BARRACKPORE KOLKATA 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L3 | Rejected-Finance QUOTED RATE NOT LOWEST | |
| 4 | L4₹1.0 Cr+₹16.3 L (18.6%)Rejected-Finance 44B CIRCULAR GARDEN REACH ROAD KOLKATA 700 023 | KOLKATA | WEST BENGAL | 700023 | L4 | Rejected-Finance QUOTED RATE NOT LOWEST |
Tender Value
₹1.2 Cr
EMD Value
₹2.0 L
Closing Date
15 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KOLKATA
Headquarter Commander Works Engineers Military Engineer Services No1 National Library Avenue Alipore Kolkata700 027
SPECIAL REPAIR TO SIGNAL OR LIVING ACCN TOILET INCLUDING OTHER BR AND EM WORKS IN BLDG NO P-4 OF BENGAL AREA SIG COY UNDER GE (A) KOLKATA
2023_MES_627454_1
8286/E-30/23-24
Open Tender
Civil Works
Item Rate
180 days
GE(A) KOLKATA
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
GE ALIPORE KOLKATA
₹2.0 L
Yes
7 Feb 2024
8 Nov 2023
23 Dec 2023
8 Nov 2023
15 Dec 2023
30 Nov 2023
9 Nov 2023 - 16 Nov 2023
Amount
Taking down cement plaster in any description on brick or stone wall etc incl racking out joints, hacking for key, scrubbing down with water etc complete all as directed.
Taking down shutter exceeding 1 Sqm but not exeeding. 2 Sqm each etc complete all as directed .
Taking down chowkhats or frames with shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame) complete all as directed.
Taking down chowkhats or frames with shutter not exceeding 1.5 sqm each (without taking off shutter from the frame) complete all as directed.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.
Demolition of cement concrete (un-reinforced) not exc 15cm thick in ground floor and paving (below or above ground level) complete all as directed.
Dismantling of water tank and removing to store of capacity exceeding 500 litres & not exceeding 1000 litres complete all as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets complete all as directed.
M&L for 15 mm thick rendering in CM (1:6) on other than fair face of brick or concrete surfaces on internal surfaces finishing even and smooth without using extra cement complete all as specified and directed.
M&L for 15 mm thick rendering in CM (1:4) on brick or concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on brick or concrete ceiling surfaces, finishing even and smooth without using extra cement all as specified and directed. Note:- Cost of necessary scaffolding for execution of the work is deemed to be included in quoted unit rate.
M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 2 mm thick wall care putty on wall surfaces including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.
M & L for complete removal of existing finishes and treating with two coats of oil emulsion distemper (any colour/tint) over 2 mm thick wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as directed and specified.
M&L for preparation and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43/liter/10 sqm over and including priming coat of exterior primer applied @ 0.90/litre/10 Sqm over 2 mm thick exterior wall care putty of new surfaces, all as specified and directed.
M&L for preparation after complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43/liter/10 sqm over and including priming coat of exterior primer applied @ 0.90/litre/10 Sqm over 2 mm thick exterior wall care putty of old surfaces, all as specified and directed.
M&L for preparation of new plastered surface of ceiling and applying three coat of white wash on new surface etc, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old plastered ceiling surfaces and applying two coat of white wash (any colour/tint) on ceiling surfaces complete all as specified and directed.
M&L for preparation of new surfaces and applying three coats of white wash on walls, complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces or un plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.
S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.
S&F of mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge.
M&L for applying two coats of synthetic enamel paint on new steel and iron surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.
S&F of 2nd Class Hardwood Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints all as complete specified and as directed.
S&F of 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete specified and as directed.
S&F of 30mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.
S&F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy all as complete specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surface complete all as specified and as bdirected by Engineer-in-Charge.
S&F of Power coated aluminium door shutter fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed by the Engr-in-Charge.
S&F of Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc, complete all as spcified and directed.
S&F of PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed.
S&F of aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.
S&F of aluminium handles 150 mm long cast type, anodised complete all as specified and directed.
S&F of stainless steel butt hinges,100 mm long complete all as specified and directed.
M&L for 25x4mm size mild steel flat iron as in hold fast conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-charge.
M&L for PCC type C1 1:3:6 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings/hold fast, kneelers, apex stones, bed plates, kerbs water troughs and the like including or chamfered angles and throating, complete all as specified and directed
M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) cmplete all as specified and directed.
All as per item No 38 here-in-before but except brick complete all as specified and directed
M&L for brick work with old size sub class 'B' bricks,straight or curved on plan to any radius in half brick thick walls built in CM(1:4) cmplete all as specified and directed.
M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in floor Screed bed or bedding layer 15 mm thick in cement mortar (1:6) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed.
M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting Screed bed or bedding layer 10 mm thick in cement mortar (1:4) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed.
M&L for double charge Vitrified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm (1200x600/800x800mm)as flooring with border of dark shed, over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete in all respect as specified.
M & L for double charge Vitrified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm (1200x600/800x800mm)as skirting with border of dark shed, over and including 10mm thick screed bed/bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete in all respect as specified.
M&L Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc .11 sqm but n exc 0.18 sqm in floor Screed bed or bedding layer 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles .complete all as specified and as directed by Engineer-in-charge.
M&L Glazed ceramic coloured wall tiles of size 450x300x6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles Screed bed or bedding layer 10 mm thick in cement mortar (1:4) etc, complete all as specified and as directed by Engineer-in-charge.
M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified & directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-Charge.
M&L for 25mm thick PCC Type B-1 1:2:4 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge.
Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and as directed by Engineer-in-charge.
All as per item No 50 here-in-before but 20mm steel tubing complete all as specified and directed
Supply and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
All as per item No 52 here-in-before but 20mm 20mm outer dia CPVC pipes complete all as specified and directed
S&F of Gun metal, globe or gate valve suitable for 20 mm bore of pipe fancy type chromium plated ,high pressure with crutch or butterfly handle, screwed both ends for for iron pipe or for unions complete all as specified and directed as in repair.
S&F of 15mm bore Brass CP bib cock, fancy type with chromium plated crutch or butterfly handle complete all as specified and as directed as in repair.
S&F of Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed by Engineer-in-Charge as in repair.
S&F of 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed .
S&F of 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed as in repair.
S&F of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F of towel rail of brass chromium plated tube 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed as in repair.
M&L for cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and as directed.
S&F of soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall etc, complete all as specified and directed as in repair.
S F of Vitreous China Urinal, Half stall type, white and 32mm waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) suitable for urinals, incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc,complete all as specified and directed as in repair.
S&F of wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and as directed as in repair .
S&F of PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete all as specified and directed.
S&F of 15mm chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook, complete all as specified and directed as in repair.
S&F of chromium plated toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed as in repair.
S&F of 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed, as in repair.
S&F of 15mm bore Brass chromium plated angular stop cock with crutch or butterfly handle complete all as specified and as directed as in repair.
S&F of PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed as in repair.
S&F 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and as directed by engineer-in-charge.
M&L for PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed
S&F of 25mm curtain rods dicorative brass chromium plated with fixing brackets including taking down old pelmet box complete all as specified as in repair.
S&F of brass chromium bracket dacorative type for curtain rods plated complete all as specified as in repair.
S&F of triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr complete all as specified and directed.
M&L for RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in pre cast slabs supported on walls for cup board, counter basin and kitchen salbs, manhole cover etc complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hopping for columns, beams, slabs etc hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as directed.
S&F of Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc complete all as per specified and directed as in repair.
S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as per specified and directed as in repair.
S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed as in repair.
Hacking out old broken glass of any thickness, sizes quality on description from metal frames includng punching or drilling out old glazing pins/spring clips complete all as directed.
S&F of 5.0 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F 5.0 mm thick Frosted glass ordinary quality and glazing with oil putty or wooden beads in square area not exceeding. 0.5 Sqm in each pane complete all as specified and directed.
S&F of power coated aluminium partition wall (partly glazed & partly prelaminated partical board) with 4.8mm thick plain ordinary glass and 9mm prelaminated partical board interior grade one side with decorative choice lamination & other side balancing white lamination of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed as in repair.
S&F of Vitreous China wash basin (coloured), Pedestral pattern, boul size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed as in repair.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.
M&L for pre-polished cement concrete designed coloured pavement tiles glossy finish each tile of size not exc 0.16 sqm 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for 20 to 25 mm thick machine cut Kota stone slab flooring ,stair case step etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for 20 to 25 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing with & including 10 mm thick backing plaster in cement mortor 1:4 complete all as specified and directed.
Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.
M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.
All as per item No 93 here-in-before but for 5 pin 6 Amps modular socket outlet on the same board with 1.5 sqmm 1100 volt FRLSH PVC insulated stranded copper cable complete as specified and directed.
All as per item No 93 here-in-before but for 5 pin 6 Amps modular socket on the independent board with 1.5 sqmm 1100 V grade FRLSH PVC insulated stranded copper cable complete as specified and directed.
All as per item No 93 here-in-before but for one 6 pin 6/16 Amps socket on independent board with2.5 Sqmm PVC insulated unsheathed copper cable multistrand conductor 11000 volts grade FRLSH and 2.5 sqmm copper conductor cable as earth continuity conductor complete as directed.
S & F of Modular type switch, one way 6 Amps, 1 module complete Make:-Legrand/Anchor(Roma)/Crabtree
S & F of Modular type socket 5 pin, 6 Amps 2 module complete. Make:-Legrand/Anchor(Roma)/Crabtree
S&F of Modular type socket 6 pin, 6/16 Amps 2 module complete Make:-Legrand/Anchor(Roma)/Crabtree
S&F of Modular type switch, one way 16 Amps, 1 module complete Make:-Legrand/Anchor(Roma)/Crabtree
S & F of Call bell musical door chrome AC 230 volts single pole (Ding dong Type)
S&F of Modular Bell push 6A 1 module complete all as specified and as directed by the Engr-in-Charge.
S&F of Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.
S&F of Electronic Ceiling fan regulator (2 Module stepped type) flush type suitable for 230 V AC.
S&F of Batten type Lamp holder made of PVC/Polycarbonate with back plate complete all as specified and as directed by the Engr-in-Charge.
S&Fof LED bulb 0.5 watt in Red & Green clour dually fixed in Batten holder all as directed by the Engr-in-Charge.
S&F of LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded aluminium housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed. Make: Crompton (CCS-100-20-65-HL2-DP-NWH) / Havells (LUMILINEPLUSNEOBS20WLED830SPCSSIND) / Bajaj(BCLAB 40W LED P)
S&F of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed by the Engr-in-Charge, as in repair. Make : Crompton, Cat No. : LCTLRNE-36-FO-CDL Havells (CAT No- VENUSNEOHE4x1PLR36WLED8576)/ Philips(CAT No- RC38BBLED36S-6500PSUOD WHPIR)/BAJA (CAT NO-BZRSQL 36L LED GX WH)
S&F of LED luminaire 24 watt, 220 V AC recessed type 300mm x 300mm with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed by the Engr-in-Charge. Make :HAVELLS - Cat No PLUTO1x1PLR24WLED8575/Crompton (Cat No- CCR-141-24-57-SL-NWH)/ MAGIK( Cat No- BZRSQL 24 L WH OD SD)
M&L for Sheet metal enclosure MCB DB double door, IP -43, vertical type Triple pole & neutral 4 way with fully insulated 200 Amp copper bus bar for each phase, with 2 neutral bar, 2 earth bar and cable ties for cable management suitable for mounting MCB SP 12 Nos Out going and 01 No 4 pole incoming MCCB of capacity upto 160 Amp including taking down of old one complete all as specified and directed. Make : Legrand/Havells/ABB/C&S. NOTE:- MCCB & MCB's are measured and paid in separate items.
M&L for Sheet metal enclosure MCB DB double door,IP -43, vertical type Triple pole & neutral 6 way with fully insulated 200 Amp copper bus bar for each phase, with 2 neutral bar, 2 earth bar and cable ties for cable management suitable for mounting MCB SP 18 Nos Out going and 01 No 4 pole incoming MCCB of capacity upto 160 Amp including taking down of old one complete all as specified and directed. Make : Legrand/Havells/ABB/C&S. NOTE:- MCCB & MCB's are measured and paid in separate items.
S&F of MCCB 63 Amp, 4 Pole, 415 Volt, AC, 16 KA, Ics = 100% Icu with adjustable thermal setting and fixed magnetic setting including spreader terminals, conform to IS/IEC 60947-2 and IEC 60947-2 complete all as specified and as directed by the Engr-in-Charge. Make Legrand/C&S/Havells/ABB
S&F of MCCB 125 Amp, 4 Pole, 415 Volt, AC, 16 KA, Ics = 100% Icu with adjustable thermal setting fixed magnetic setting including and spreader terminals, conform to IS/IEC 60947-2 and IEC 60947-2 complete all as specified and as directed by the Engr-in-Charge. Make Lrgrand /C&S/Havells/ABB
S&F of MCB DB SPN 8 way, 230 volts double door, IP43, including bus bar neutral link, earth bar and din rail, recessed in wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.
S&F of MCB DB SPN 4 ways, 230 Volts, double door, including bus bar neutral link, earth bar and din rail, having protection level IP43, recessed in wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.
S & F of Blanking Plate for MCB DB complete all as directed by Engr-in-charge
S&F of MCB 40 Amps to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.
S&F of MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.
Taking down unserviceable sub main wiring any size including conduit/ casing caping and making good to the disturbed surface complete all as directed.
M&L for circuit/sub-main wiring concealed with two run of 1100 V grade FRLSH PVC insulated & unsheathed 1.5 Sqmm single core multi stranded copper conductor cable alongwith one run of 1.5 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable green for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 1.5 Sqmm cable shall measured as one length.
M&L for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 4.0 Sqmm cable shall measured as one length.
M&L for of sub-main wiring with two run of 1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 6.0 Sqmm cable shall be measured as one length.
M&L for of sub-main wiring with two run of 1100 V grade FRLSH PVC insulated & unsheathed 10.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 10.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 10.0 Sqmm cable shall be measured as one length.
S&F of AC power supply unit consisting of starter (2M) in two module box and 15 Amp socket in seperate 2 Module Box and all as directed by the Engr-in-Charge.
M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. with 25 x 3 mm aluminium strip complete all as specified and direted.
S&F of Rigid non-metallic PVC conduit 25 mm dia for telephone wire / internet wire exclusive of boxes (junction/ terminal) but iclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and direted.
S&F of PVC circular box 1-4 way suitable for 25mm rigid PVC conduit complete all as directed by Engg-in-Charge
Taking down carefully old LED light fittings and keep it in safe coustody and refixing on completion of wiring properly on the existing place or as per site requirement complete all as directed.
S&F of LED street light with IP 66protection and front toughen glass luminaries of capacity 45 watt with high power LED and ensure uniform light distribution complete all as specified and as directed by the Engr -in -Charge including taking down old HPSV/MH light fitting. Make- CROMPTON (CAT NO-LSTS-45-CDL-M)/BAJAJ (CAT NO- BRLEP 45W LED V2)/HAVELLS (CAT NO- ENDURASUNDOWNSL45WLED765PASYBOPC)
NIRMAL SALES CORPORATION
Shree Mahabir Builders
INDIA ELECTRICAL EQUIPMENTS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .