Renovation of toilet block

RENOVATION OF TOILET BLOCKS - 3BLOCKS

Removing doors and windows with frames/ without frame and stacking the materials as directed with all leads, lifts etc. complete. a) size - 0.75m x 1.85m

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Removing cement tiles for floor and dado without bed concrete including stacking the materials as directed with all leads, lifts etc.complete.

Removing of old water supply & sanitary line including GI pipes, tee, tap, cisteren,wc seat, wash basin etc complete as per directed.

Removing lean cement concrete including stacking the spoils as directed with all leads, lifts etc. complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing and laying in situ, cement concrete M-10/(1:4:8) of trap/granite/quartzite/gneiss metal for foundation and bedding including plywood/steel formwork bailing out water, compacting, finishing uneven and honeycombed surface, curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)

Providing and laying matt finish ceramic tiles (kajariya, Johnsons or nitcco make)of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.

Providing and laying ceramic tiles (kajariya, Johnsons or nitcco make) having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan (Jaquar makes) 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern (Jaquar makes) with all necessary pipe connection etc. complete.

Providing and fixing white european type wall-hung, of size 360mm x 360mm x 575mm (Jaquar makes) including lid, soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge. i) With 10 litre enamelled low level flushing cistern(Jaquar makes) --do--with hand phoset (Jaquar makes) and fittings.

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin (Jaquar makes) of 55x40 cm size including cold water piller taps (Jaquar makes), brackets, rubber plugs and brass chain, stop tap (Jaquar makes), chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal (Jaquar makes) with PVC 5 liters flushing cistern (Jaquar makes) with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

Providing and fixing 10 cm PVC nahani trap (Supreme/finolex/Paras make) with grating etc. complete.

Providing and fixing 100 mm dia. Chromium plated brass showers rose( Jaquar) to 15 mm dia. Supply pipe including necessary bend, socket, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

Providing and fixing C.P. pillar cock/consiled cock or angle cock (Jaquar make) with aerator of approed make including necessary sockets/union nut etc. complete.

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe (Supreme/finolex/Paras make) with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same near EMD sectin or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe (Supreme/finolex/Paras make) with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same at site or as directed etc. complete.

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe (Supreme/finolex/Paras make) with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same at site or as directed etc. complete.

Providing and fixing 15 mm dia. Screw down bib cock and two way bib cock(jaquar make quarter turn) of required type including necessary sockets, union nut, testing etc. complete. (Prior approval of sample by Ex.Engineer is necessary before use.)

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. (Supreme/finolex/Paras make) with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same near EMD section or as directed etc. complete.

(a) Providing, laying and fixing P.V.C. pipe of 75mm dia.(Supreme/finolex/Paras make) with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same near EMD section or as directed etc. complete.

Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixtures and fastenings and handles on both sides and finishing with applying acrylic putty, primering and oil painting three coats complete.

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm

Providing & fixing stainless steel soap dish as per directed. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)

Providing and fixing hook patti 0.6m long in bathroom for hanging clothes.(Prior approval of sample and brand by Ex. Engineer is necessary before use.)

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Removing old paint from steel and other metal surfaces and wall surface including making the surfaces even with hand scrapping, scaffolding etc. complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ( Birla wall care/Asian).

Providing and applying priming coat (Asian make) on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat)

Providing and fixing mosquito net with aluminium section frame to the ventilator. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

Providing and fixing in position of One Side Polishe Kaddappa of 25 mm to 30 mm thick required thickness including making groove in wall / concrete surface filling joints with slurry, curing, polishing, rounding edges, as required cleaning etc. complete.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

REMOVING OLD PARAPET WALL AND RECONSTRUCT WALL of A AND B BLOCK ONLY FIRST FLOOR.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Shifting of debries by tractor trip as directed by EIC.

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

Providing and applying two coats of exterior acraylic emulsion paint (Asian make) confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat (including primer area) ,scaffolding if necessary , and watering the surface for two days etc complete.

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

Providing, laying and fixing P.V.C. pipe of 75 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Kisanlal Panchamlal Bardhiya

NARESH ISHWARDAS HOLANI