Door to Door maintenance of Md Accn for AGE E/M at Mil Stn Bikaner

Amount

Taking down switch boards / fitting / fixture , identify and rectify the complaints pertains to internal electrification of any type and nature of MD / OTM Accns such as rectification of faulty electric circuit , tightening of loose wiring / conduits replacement of defective accessories such as switch, socket, ceiling rose , holders etc. shall be measured and paid separately. Cost of minor stores , such as screws, clamps, washers, insulation tapes, nut , bolts etc. shall be deemed including in the quoted rate. ( Note . If the contractor fail to rectify the defects mentioned in the complaint slip on same day,. he will be charged Rs. 100/- per complaints/ per day and same will be recovered from his RAR . Each job shall contain 10 complaints). Note for Items No 1,10 to 33, 40 to 51, 54 to 66, 68, 69,74 to 81, 83 to 134 :- The contractor / his rep will collect the complaint from complaint cell ( Concerned JE E/M) every day at 9.00 AM and rectify the complaints same day and deposit the complaint slip ( duly signed by the users ) to concerned JE E/M.

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engr-in-Charge.

Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including surface PVC conduit Medium class 20mm dia ISI marked with all fittings such as tees, bends etc terminating in and including sunken box covered with and including 3 mm thick bakelite laminated sheet top cover ‘Hylam’ for one fan or light or 5Amps socket or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. Make of cables :Havell's/Paragon/Nicco/L&T. Make of PVC Conduit : Polycab/Supreme/Modi/Finolex/Prince/Precision

Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including PVC caping casing Medium class 20mm dia ISI marked with all fittings such as tees, bends etc terminating in and including sunken box covered with and including 3 mm thick bakelite laminated sheet top cover ‘Hylam’ for one fan or light or 5Amps socket or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. Make of cables :Havell's/Paragon/Nicco/L&T. Make of PVC casing capping : Polycab/Supreme/Modi/Finolex/Prince/Precision

All as per item No 3 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 3 here-in-before but cable of 2.5 Sq mm for 15 Amp switch socket outlet on independent board including provision of 2.5 Sqmm PVC insulated unshethed multistranded copper conductor as earth wire

All as per item No 3 here-in-before but for one light point control by two way switch complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including surface in existing PVC conduit Medium class 20mm dia ISI marked with all fittings such as tees, bends etc terminating in and including sunken box covered with and including 3 mm thick bakelite laminated sheet top cover ‘Hylam’ for one fan or light or 5Amps socket or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. Make of cables :Havell's/Paragon/Nicco/L&T. Make of PVC Conduit : Polycab/Supreme/Modi/Finolex/Prince/Precision

All as per item No 8 here-in-before but in existing conduit cable of 2.5 Sq mm for 15 Amp switch socket outlet on independent board

Supply & fixing LED T8 Tube light rod ( Retro Fit ) ingress protection IP20 18W in make CG/Havells/Phillips/polycab with complete all as specified and directed by engineer-in-charge.

Supply & fixing Connecting fixture for T8 tube light 1*18w/20w 4 Ft in make CG / Havells/Phillips/ploycab. complete all as specified and directed by engineer-in-charge.

S&F in replacement LED T5 Batten lightening fixture, energy efficent 18/20 Watt ( 4 feet) complete all as specified and directed by engineer-in-charge make:-CG/ Havells/Phillips

S&F in replacement Decorative ultra slim linear LED T5 Batten lightening fixture, Eco friendly energy efficent 10/12Watt (2 Feet) complete all as specified and directed by engineer-in-charge make :-Havells/Phillips/CG

Supply & fix in replacement LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge. Make:-CG / havell's / Phillips.

S&F in replacement lamp holder PVC/Poly carbonate body with back plate complete all as specified and as directed by Engineer-in-Charge.Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement Switch piano Single pole 5 Amps, two way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement switch piano flush type, Single pole 5 Amps, one way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of switch piano flush type, Single pole 15 Amps, one way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of socket outlet flush type, 3/5 pin, 5/15 Amps, complete all as specified and as directed by Engineer-in-Charge. Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of socket outlet flush type, 3 pin, 5 Amps, complete all as specified and as directed by Engineer-in-Charge. Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of ceiling fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F in replacment PLS Lamp two pin 9W Make :Crompton Greaves/Philips/ Wipro

S&F in replacment PLS Lamp two pin 11W Make :Crompton Greaves/Philips/ Wipro

S&F in replacment PLS Lamp two pin 13W Make :Crompton Greaves/Philips/ Wipro

S&F in replacment PLS Lamp two pin 18W Make :Crompton Greaves/Philips/ Wipro

S&F in replacement Recessed mounting LED 2x2 luminaire type BCTBLR 36W ZTN NW in make Bajaj or equivelent in CG / Phillips / GE / Wipro / Havell's

Supply and Fixing in replacement MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge Make :- Legrand,ABB,Schneider

Supply and Fixing in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- ABB,Legrand, Schneider

Supply and Fixing in replacement MCB 63 Amps, 440 Volt AC supply Triple pole with neutral(TPN) C curve with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand/ABB/Schneider

S&F blank cover for MCB DBs

S&F in replacement Bell Ding dong AC single pole 230volts Make : Havells,Cona,SSK,wipro, Legrand

S&F in replacement Bell push button Piano flush type single pole 5Amps make : Havells,Cona,SSK,wipro, Legrand

S&F in replacement sub main wiring in PVC casing and capping with 2 single core 10 sqmm multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 10 sqmm copper conductor cable connected to common earth and earth dolly complete and including PVC Cassing and Capping all as specified and as directed by Engineer-in-Charge.(Note two run of 10 sqmm and one run of 10 sqmm will be measured as 1 RM. Make of cables: Nicco, L&T, Paragon, Havells

All as per item No 34 above but of size 6 sqmm and earth wire of 6 sqmm

All as per item No 34 above but of size 4 sqmm and earth wire of 4 sqmm

All as per item No 34 above but in existing conduit with cable of size 10 sqmm and earth wire of 10 sqmm

All as per item No 34 above but in existing conduit with cable of size 6 sqmm and earth wire of 6 sqmm

All as per item No 34 above but in existing conduit with cable of size 4 sqmm and earth wire of 4 sqmm

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make -L&T ( Exora series)/Schneider/ legrand/Schnedier/GE /English Elect Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

Ditto item -5 but for 4 way SPN Make : Legrand/ Schnedier/L&T (Exora series ) /GE / English Elect

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,TPN 4 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make - Legrand / Schneider/ L&T Exora series/GE/English Elect Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 230 volts with 200 Amps rated bus bar, load line DB's are fittied with bus bar nutural links blank plates TPN vertical load line 4 ways suitable for TP/FP 'A' frame MCCB,includeing 100 Amps MCCB -01Nos ,MCB SPN 32 -04 Nos and MCB SP 04 Nos, complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivelent Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/ABB/BCH/HPL Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge Cat Part No 607841 in Make Legrand or equivalent in schneider/Seimens/L&T

S&F in replacement T-5 tube rod 14 w of Havells Cat Part No LHST 271114699 or equivalent make of Philips/Wipro

S&F in replacement Lamp CFL 36 Watt 4 pin Make CG/Philips/Wipro

S & F in replacement LED Bulb 0.5W (in different colors) complete all as specified and as directed by engr-in-charge.

S&F in replacement bad side fitting with suitable LED bulb complete all as specified and directed by Engr-in-charge. Sample approved by Engr-in-charge and GE .

S&F in replacement Decorative wall light fixture made up of Polycarbonate, suitable for retrofit 9/11 W LED lamp Complete all as specified and directed by Engr-in-charge. Sample as approved by Engr-in-charge

REPAIR TO FAN :- Taking down ceiling fan for repair/serviceing (i.e. winding/ greasing/oiling etc.), 1200/1400 mm sweep of any make and any type model, sealing cable end with tape, dismantling the blades , removing fan and deposite the blades/motor to store for repairing/serviceing complete all as specefied and as directed by Engineer in charge.

Hanging only ceiling fan and connection up the point including provision of cable from ceiling rose to fan complete all as specefied and as directed by Engineer in charge. (Note: For the purpose of payment, the wire using ceiling rose to fan for connection shall be measured and paid seperate in appropriate item and nothing extra pay for this item)

Re-winding of ceiling fan of size 1200 mm sweep with super enameled copper winding wire of gauge as per existing size /No. of turns confirming to IS, including varnishing the motor windings with best quality varnish complete all as specefied and as directed by Engineer in charge. (Make:Milan/Atlas/Chetak)

Ditto all as per item No 52 here in above but new model ceiling fan of size 1400 mm sweep complete all as specefied and as directed by Engineer in charge.

S&F in replacement of ball bearing of size/No. 6201 confirming to IS complete all as specefied and as directed by Engineer in charge.(Make: NBC/SKF)

S&F in replacement of ball bearing of size/No. 6202 confirming to IS complete all as specefied and as directed by Engineer in charge.(Make: NBC/SKF)

S&F in replacement of ball bearing of size/No. 6203 confirming to IS complete all as specefied and as directed by Engineer in charge.(Make: NBC/SKF)

S&F in replacement of brass bush suitable for ceiling fan of any make and model confirming to IS complete all as specefied and as directed by Engineer in charge.

S&F in replacement of broken bottom cover (bowl) of PVC suitable for ceiling fan of any make and model as per existing size and shape complete all as specefied and as directed by Engineer in charge.

S&F in replacement of shaft for ceiling fan as per existing size and shape complete all as specefied and as directed by Engineer in charge.

S&F in replacement down rod made out of 15mm dia MS Pipe medium Duty 60 cm long duly painted including nut, bolt & washer etc and including drilling holles on top and bottom fan fixing with fan hooks and ceiling fan respectively as reuired suitable for 1200/1400mm sweep of ceiling fan complete all as specified and directed by Engineer-in-charge .

S&F in replacement D Clamp with nuts, bolts, quarter pin and rubber reel suitable for 1200/1400 mm sweep of ceiling fan all as required at site complete all as specefied and as directed by Engineer in charge.

S&F PVC Canopies (Set of two) as required at site and complete all as specefied and as directed by Engineer in charge

S&F condenser 2.5 MFD confirming to IS complete all as specefied and as directed by Engineer in charge.

S&F of flexible wire of size 23/0.0076 stranded copper conductor complete all as specefied and as directed by Engineer in charge.

M & L in replacement fan blade (set of three) set suitable for 1200mm sweep ceiling fan of any make complete all as specefied and as directed by Engineer in charge.

M & L in replacement fan blade(set of three) set suitable for 1400mm sweep ceiling fan of any make complete all as specefied and as directed by Engineer in charge.

Cleaning and preparation of old surface of the ceiling fan complete of size 1200/1400mm sweep and spray coat painting with synthetic enameled paint complete all as specified as directed by Engineer-in-Charge.

REPAIR TO EXHAUST FAN Taking down and dismantling of exhaust fan 225mm/300mm/375mm/450mm sweep of any make and model, opening the cover, separating the rotor and stator assembly, locating the fault and making the fan fully serviceable condition including replacing the defected worn out screw, flexible wire of size 23/0.0076 , oiling/greasing the fan and re-assembling the same and testing complete to the satisfaction of Engineer in charge.

Fixing only Exhaust fan and connection up the point including cable from ceiling rose to fan complete all as specefied and as directed by Engineer in charge.

Re-winding of exhaust fan 225mm sweep with super enameled copper winding wire as per existing size confirming to IS including varnishing the motor windings with best quality varnish complete all as specefied and as directed by Engineer in charge. (Make:Milan/Atlas/Chetak)

Ditto all as per item No 70 here in above but of size 300mm sweep complete all as specefied and as directed by Engineer in charge.

Ditto all as per item No 70 here in above but of size 375mm sweep complete all as specefied and as directed by Engineer in charge.

Ditto all as per item No 70 here in above but of size 450mm sweep complete all as specefied and as directed by Engineer in charge.

S&F in replacement of blades for size of exhaust fan 225mm dully approved by GE complete all as specefied and as directed by Engineer in charge.

Ditto all as per item No 74 here in above but size of exhuast fan 300mm sweep complete all as specefied and as directed by Engineer in charge.

Ditto all as per item No 74 here in above but size of exhuast fan 375mm sweep complete all as specefied and as directed by Engineer in charge.

Ditto all as per item No 74 here in above but size of exhuast fan 450mm sweep complete all as specefied and as directed by Engineer in charge.

S & F in replacement of condenser 04 MFD confirming to IS complete all as specefied and as directed by Engineer in charge.

S & F in replacement of MS shaft for exhaust fan as per existing size and shape complete all as specefied and as directed by Engineer in charge.

S&F in replacement of MS back side cover for Exhaust fan of any sweep, size and make complete all as specefied and as directed by Engineer in charge.

S&F in replacement exhuast fan louver shutters of size( 225/300/375/450 mm ) and make complete all as specified and as directed by engineer-in-charge.

Cleaning and preparation of old surface of the Exhuast fan complete of size ( 225/300/375/450mm) and Spray painting with synthetic enameled paint complete all as specified as directed by Engineer-in-Charge. Make of paint : Asian/berger/nerolac.

REPAIR TO GEYSER Taking down and opening of the geysers 25/35/50 ltrs capacity storage type any make complete for inspection descaling by chemical treatment of internal parts such as steel inner tank, siphon assembly, heating element, etc re-assembling and refixing the same to its original position after testing on pressure complete all as directed by the Engineer-in-charge. Note :- Items such as glass wool, steel inner tank, siphon assembly etc if found unserviceable under above item will be measured and paid for separately under its relevant item.

Supply and fixing in replacement steel inner tank for capacity of geyser 25 ltrs as per existing size and shape.

Supply and fixing in replacement siphon assembly suitable for 25 ltrs Geysers, with rubber washer of suitable size.

Supply and fixing in replacement glass wool insulation material

S&F in repair hot water pipe 15 mm bore 60 cm long with brass unions one(Chromium plated) one on each side. Pipe shall be as per I.S for 15 mm bore of pipe for 25/35/ 50 ltrs capacity Geysers.

Supply and fixing in replacement steel inner tank for capacity of geyser 35/50 ltrs as per existing size and shape.

Supply and fixing in replacement siphon assembly suitable for 35/50 ltrs Geysers, with rubber washer of suitable size.

S&F in repair Thermostat switch I.S.I marked, to Geysers 25/35/50 ltrs make : Alert/Theta /Bajaj.

S&F Low density polythene pipe (LDPE) connection arrangement with pipe of pressure rating 2.5 kgf/cm2 , 15 mm bore 30 cm to 45 cm long with brass unions one(Chromium plated) one on each side in repair to Geysers 25/50 ltrs. Pipe shall be as per I.S.I

Supply and fix in replacement heating element of rating 1.5 KW capacity including washers for 25/35 ltrs capacity Geysers.Make :- “THETA/ ALERT”

Supply and fix in replacement heating element of rating 2.0 KW capacity including washers for 50 ltrs capacity Geysers.Make :- “THETA/ ALERT”

Supply and fix in replacement Indicator lamps as per existing type having red or green coloured reflector all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement flexible, 3 core PVC insulated copper conductor cable of size 40/0.0076 with over all PVC insulation ISI marked Make “ PARAGON/ PLAZA/ INCAB/ FINOLEX”

Supply and fixing in replacement plug top, 3 pin 15 Amps, including making necessary connections Make :- ANCHOR/ LEADER/ legrand / HAVELLS”, ISI marked.

Supply and fixing in replacement pressure release valve suitable for 15 mm bore of pipe for 25/ 35/50 ltrs capacity Geysers.

Supply & fixing in replacement bib cock cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified Make :- GMP/NETA/JINDAL for 15 mm bore pipe )

Supply and fixing in replacement stop cock cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.Make :- GMP/ NETA/ JINDAL for 15 mm bore pipe.

Repair to Biulding security light Taking down carefully the defective Security (street) light fittings any kind any type from the building/walls and refixing the same on Buildings/walls after repair complete all as directed by Engineer in Charge.( Note: A Team of workers for emergency shall be avlaible inside the camp for 24 Hours) 1. Any other reqirement like T&P, ladder,vehicle if required will be provided by the contractor to his labour and no extra cost in this account shall be paid to the contractor. 2. The contractor/his rep will collect the complaint from JE every day 9.00 hrs , the same will be rectified before sunset on same day,If the contractor fail to rectify the defect mentioned in the complaint slip on same day, he will be charged Rs 100/per complaint and same will be recovered from the contract amount.

S&F in replacement tube rod for energy efficient street light 24W. Make : Cat Pt Nos T5 24W 6500K (ENERGYLUX) in CG or equvalent to Bajaj/Philips

S&F electronic ballast 2 X 24 Watt suitable for 4x24W street light fitting. Make :Cat Pt Nos EB224T5-A/I in CG or Bajaj/Philips

Supply and fixing in replacement Bipin holder for tube light 24W fittings. Make – Bajaj/Philips/Crompton Greaves

Supply and fixing in replacement outdoor Driver unit 25 watt with surge protection. Make –CG Model SODVES-36-600-25W

Supply and fixing in replacement outdoor Driver unit 45 watt with surge protection. Make –CG Model SODQL-65-700-45W

Supply and fixing in replacement surge protection devices compatible with industrial and outdoor LED fixtures upto rated power of 45 Watt Make CG Model SRPS-5K-440 in equivalent

S&F inreplacement CFL 36watt 04 PL suitable for street light fitting ‘L’ type.Cat Pt Nos 36W CFL 4P 6500K/2700K/4000K in CG or equvalent to Bajaj/Philips

Supply and fixing in replacement choke/ballast electronic 36/40 watt 230 volt for tube light /CFL fitting. Make – Cat Pt Nos EBN136-A/Sin CG or equvalent to Bajaj / Philips

Supply and fixing in replacement Bipin holder for CFL fittings. Make – Bajaj/Philips/Crompton

Supply and fixing Street light bracket in replacement, made of GI pipe 40mm bore, light grade not less than 1.2 m long bent to shape including fixing with 2 nos suitable size of MS flat iron clamps, nuts, bolts and washers and making connections all as directed by the Engineer-in-Charge.Make of GI pipe : Jindal/Surya/Prakash

Suppy and Fixing LED based street light, housing made up of LM6 pressure die cast aluminium alloy with effective thermal management, sturdiness. The fixture should have a minimum system efficiency of more than 100 lumen/watt and a minimum system lumen output of not less than 7200 lumens and maximum system wattage 25 Watts. The fixture shall have a correlated colour temperature of al least 5700K and CRI f minimum 70. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance ingress protection of IP66 (lamp and gear compartment and mechanical inpact resistance raiting of IK>=08. The fixture driver should have an operating voltage range of 140-270 V & potted type for humming free operation, driver should be withstand up to 440v for 8hrs, two surge proection not less than 5KV one on driver and one external surge protection, PF>0.95 and THD<10% and have double phase protection. LED light fitting should be suitable for ambient temperature from (-) 10C to (+) 50 C. The fixture should comply with the parameters IEC 60598 and LED should comply to IEC 61000-3-2 ed. 3.2 per harmonics IEC 61347-2-3,2006 in configuration with IEC 61347-1 ed 2.0,2007 for electrical safety LM 79 and for LED LM 80 test report needs to be submitted from the house NABL accreditation laboratory. Make CG/C&S/Bajaj/Havells

S&F Haylum sheet of size 7" X 4" Complete all as per specified and directed by Engr-in-charge.

S&F Laminated sheet of make Hylum of size as per site requirment Complete all as per specified and directed by Engr-in-charge.

S&F terminal box of Size 8"X 10 " Complete all as per specified and directed by Engr-in-charge.

External Water supply :- M&L for rectification of external water supply complaints of any types /nature such as leakage of pipes on surface/on wall/under ground etc of sizes 15 mm bore to 50mm bores pipes and repair/replacement of unserviceable materials such as elbow/tee/sockets/unions/ nipples/ gate valves/pipes etc of any sizes complete all as specified and directed by Engr-in Charge. Notes: (i) All minors items such as packing materials, taflon tape, spun treads , elbow,Tee, sockets, nipples,unions, etc upto 50 mm bore shall be deem to included in quoted rate. (ii) Earth work, GI pipes and gate valves shall be measured and apid seperately under relevant items.

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point completed all as specified and directed by Engineer-in-Charge

M&L for cutting/dismantling of PCC hardstanding / WBM road with soling & premix carpet of any description for repair/replacement of water supply pipe lines and disposal of debris & rubbish to a distance exc 250m but not exc 500m and making good the same with & including plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as existing depth complete all as specified & directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore for GI pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 40mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50mm bore, complete all as specified and directed. Make: Jindal/Electro steel casting Ltd/Tata/Swastik Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 80mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as directed.

S&F 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 15mm bore, complete, all as specified & directed.

S&F 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, complete, all as specified & directed.

S&F 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25mm bore, complete, all as specified & directed.

S&F 40mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 40 mm bore, complete, all as specified & directed.

S&F 50mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete, all as specified & directed.

GS BUILDERS AND ENGINEERS

M/S ADIL CONSTRUCTION COMPANY

BIDAWAT ENTERPRISES

LAKSHMI ASSOCIATES