GE (N) P/TOKEN- 66 OF 2021-2022PROVISION OF CERTAIN LBW, REV AND SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Taking down chowkats or frames with shutters exc. 1.5 Sqm but not.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern, complete all as shown on drawing and as directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern, includung dismentling existing complete all as shown on drawing and as directed.

Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern, includung dismentling existing complete all as shown on drawing and as directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sq.cm but not exc. 25 Sq.cm complete all as specified and as directed.

S&F stainless steel power hinges auto closing 15-22 mm closing concealed hinges for insert doors suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed.

S&F 250 mm long stainless steel stylish modular kitchen/cabinet/door and drawer handleshandles for cupboard shutter complete all as specified and as directed.

M&L for stainless steel door catcher, door magnetic stopper door magnetic cabinet, drawer, cupboard, dresser, wardrobe & door stopper complete all as specified and as directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement on brick/ stone wall ,complete all as specified and as directed.

M&L for preparation of new plastered or unplastered wall surfaces of any description over 10cm girth or width not otherwise described and applying two coats of acylic distemper over a coat of primer complete all as specified and as directed.

M&L for stainless steel 5 ball bearing telescopic slide/drawer channel 45mm width, noice less and closing touch and move with rear mounting brackets full extension slides, load capacity 45 kg complete all as specified and as directed.

M&L for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Removing excavated soil n. Exc. 50m and depositing where directed at a level n. Exc. 1.5m above the starting point complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type C-2 using 40mm graded stone aggregate in subbase complete all as specified and as directed.

Material and labour for machine pressed precast rubber moulded cement concrete coloured glossy finish interlocking tiles, paver block, any shape and size as approved,60mm thick, conforming to IS 15658-2006, M-35 grade in floor/pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles all as specified and directed. NOTE: (i) Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample complete all as specified and as directed.

Material and labour for 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate cast in situ including use and waste of formwork as in kerb to paving / footpath including weathering, slightly rounded or chamfered angles, throating and finishing exposed surface even and smooth complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide & n.exc 1.5 mtr deep & getting out in any type of soil complete all as specified and as directed.

M & L Returning filling in soft/loose soil including spreading leveling watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

M & L Earth filling in floors etc., spreading and leveling in layers not exceeding 25cm thick, well ramming including watering as required complete all as specified and directed.

M & L for plain cement concrete (1:4:8) Type D-2 using 40mm graded aggregate in foundations filling and mass concrete complete all as specified and directed.

M&L hard core of broken stone gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for 25 mm thick damp proof course in CM (1:2:) mixed with integral water proofing compound @3%by wt of cement with nessery formwor Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and as directed.

Supply only WPC

Materials and labour for 75mm thick plain cement concrete (1:4:8) Type D2 using 40mm graded aggregate in sub base of floor complete all as specified and directed.

M&L 25mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floor/ court yard, finished even and smooth with using extra cement complete all as specified and as directed.

Materials and labour for Reinforced Cement Concrete 1;2:4 Type B1using 20 mm graded stone aggregate as in LB,Lintel beam complete all as specified and as directed.

Materials and labour for Reinforced Cement Concrete 1:2:4 Type B1 using 20 mm graded stone aggregate as in Chajja complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams; beam hunching; lintels and like for rough finished surfaces complete all as specified and directed.

Use and waste of formwork to chajjas weather shades and similar items including edges for rough finished surfaces of concrete flat complete all as specified and directed.

M/L 7 to 8mm thick non skid coloured ceramic tiles area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm as in floors over and incl. screed bed of 15mm CM (1:4) & jointed neat cement slurry & pointed with coloured cement to match with the tiles complete all as specified and as directed.

S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Ditto all as per item no 38 but on vertical surfaces

M & L 600x300 x 7mm thick coloured tiles glazed ceramic in vertical surfaces dados etc set and jointed in neat cement slurry and pointed in white cement over & incl.10 mm thick screed bed in CM 1:4.complete all as specified and as directed.

Materials and labour for brick work with fly ash bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed.

S&F Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

M&L TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, all as specified and directed

Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail, bottom rail; panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°) and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

M & L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in hold fast block complete all as specified and as directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for 35 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 30mmx 4mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and directed.

Supply and fix for aluminium anodised powder coated three track sliding window with two glazed shutters with and including 4mm thick tinted glass of modiguard and one gauged shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604 complete all as specified and directed.

S&F for aluminium powder coated louvered ventilator with provision of exhaust fan opening using ‘'Jindal” aluminium section including 3 mm thick foasted glass and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm etc complete all as specified and directed.

Material and labour for 12mm thick mineral fibre false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, complete all as specified and as directed. Make :- Armstrong, Diaken, New Age.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and as directed.

S&F 100mm aluminum barrel tower bolt with bright bolt complete all as specified and as directed.

S&F framed work such as grill, guard bars and similar work conforming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.

M/L 75mm thick 1:3:6 type C-2(using 40mm graded aggregate) as in plinth protection complete all as specified and as directed.

Supply 10 ltr capacity PVC valveless, syphonic action type, low level flushing cistern white complete with inlet, ball valve float complete all as specified and as directed.

S&F CP bib cock with crutch or butterfly handle of chromium plated 15mm complete all as specified and as directed.

S&F CP fancy type stop cock chromium plated with crutch or butterfly handle of 15mm complete all as specified and as directed.

M&L angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and fix galvanized steel tubing medium grade, 15mm bore (concealed) with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Ditto all as per item no 63.00 but for 20mm

Ditto all as per item no 63.00 but for 25mm

S & F chromium plated shower rose 15 mm bore with swivel joints of size 100mm incld fixing to steel pipe complete all as specified and as directed.

S & F Tubular towel rail, 20mm dia, D type, 60cm long between flange lAluminium Anodised complete all as specified and as directed.

S&F 500 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm PTMTball valves high pressure with polythene float and nut complete all as specified and as directed.

S&F vitreous china squating pan orissa pattern size 580x440 mm white with integral foot rest complete including lime concrete (excl flushing cistern and flush pipe )but connecting to flushing pipe , anti symphonage pipe etc complete all as specified and as directed.

S&F vitreous chaina wash hand basin 550x400mm (flat back type) including cutting for and pinning in ends of brackets incl waste fittings, CP pillar tap with capstan head, waste water pipe complete all as specified and as directed.

S & F for cast iron floor traps with grating jointing to waste pipe fixed in cement concrete TypeB1 1:2:4 100 mm dia complete all as specified and as directed.

S & F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:4) on unfair faces of brickworks complete all as specified and as directed.

M&L for applying two coat of cement base paint on new surface including preparation of surface complete all as specified and directed.Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed.

Dismantling plain or corrugated AC/Steel sheeting , any gauge or any thickness, as in roof coverings complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling unserviceable asbestos cement (Corrugated, Semi corrugated etc.) sheets complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridge, valley gutters fixed with self tapping screws with side lap complete all as specified and as directed.

Material and labour for 12mm thick Gypsum fibre false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges as in Coping complete all as specified and directed.

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.

Preparation of surfaces by applying wall care putty 1 to 1.5 mm thick on walls surfaces , filling cracks by crack filler and smoothen the surfaces with using sand paper etc complete all as specified and as directed.

Preparation of old surface of wall/ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of wood surfaces and wood based material new or old of any description and girth not other wise described and treated with two coats of creosote

M&L for preparation of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer.

Dismantling floor, Paver Blocks/ Chequered tiles, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L Brick work with fly ash bricks, conforming to IS- 12894:2002, Non modular, class designation 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and as directed.

Demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 300mmx200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 10 mm thick in cement mortar 1:3 complete all as specified and directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.

M&L 40mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floor/ court yard, finished even and smooth with using extra cement including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 20mm bore complete including taking down old unserviceable valve all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 25mm bore including taking down old unserviceable valve complete all as specified and as directed.

Taking down shutters of any description, area not exc.1 sqm each complete all as specified and as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and as directed.

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.

Supply and fix for 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Demolition of cement concrete in ground floors , pavings, sunken floor etc (below or above ground level) complete all as specified and as directed.

Supply and fix in repairs for 15mm dia bib cock standard (old handle) without flange of PTMT any colour high pressure screwed for iron pipe all as per Cat No.121-0 (Standard Series) of make Prayag or equivalent complete all as specified and as directed.

S&F mild steel rolled hollow square/ rectangular tube in purlins, roof battens for Magalore tiles etc confirming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.

M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

Dismentling wooden scantling of any size and position complete all as specified and as directed.

Supply and fix for mild steel window, side hung, double shutter, one glazed and other mosquito proof shutter including mild steel 10mm square guard bars @150 mm centre to center horizontally, plain sheet glass 3 mm thick, stainless steel wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm mosquito proof wire mesh fixed with 15mm x 3mm flat iron, projecting type hinges with steel handles and steel peg stay with glazing bars, dovetailed or welded with applying two coats of synthetic enamel paint over a coat of red oxide primer and complete including taking down old window complete all as specified and as directed.

S&F in repair for MS handle for steel window complete all as specified and as directed.

Supply & Fix rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete.

Demolition of RCC Tank including cutting of reniforcement and make clean surface and rubbish off all the debrish from premises complete all as specified and as directed.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203 mm, bowl size 405mm x 354mm x 203mm all as specified. Make Prayag Cat Part No. 1239D or equivalent of make as per Appx 'A' as approved by GE.

S&F in repairs bib taps suitable for 15mm bore pipe long body with flange fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Cat Part No 8508 of Prayag Mist SERIES or of equivalent make as per Appx 'A' as approved by GE

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where complete all as specified and as directed.

M & L for RCC M25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M25 as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for RCC M25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed

M/L for 05mm thick on Ceiling surface cement plaster in CM 1:3 on brick or concrete surfaces finished even and smooth complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 300 x 300 x 7 mm thick, in floors etc., set in 20 mm thick screed bed of cement mortar 1:6, and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 300 x 450 x 7 mm thick, in walls etc., set in 10 mm thick screed bed of cement mortar 1:6, and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed.

M&L for precast cement concrete glazed interlocking tiles,paver block, any shape and size as approved , 80mm thick, conforming to IS 15658-2006, M-40 grade in floor/pavement laid dry to the profile including vibrating with surface vibrator after laying of tiles all as specified and as directed. NOTE: Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample. including dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified and as directed.

M&L for applying one coat of alkali resistant priming paint on wall/celing. complete all as specified and as directed.

M&L for preparation of old decorated surfaces of any description over 10cm girth or width not otherwise described and applying one coats of white wash on ceiling complete all as specified and as directed.

Solid PVC door frame of size 50mm 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside complete all as specified and as directed.

S&F 100 mm long butt hinges, heavy weight, cold rolled mild steel, and fixed, conforming to the sample kept in the office of the GE (N) Pune

S&F 150mm long extruded aluminium alloy handles, fabricated type , anodised conforming to the sample kept in the office of the GE (N) Pune

S&F 150 mm long aluminium anodised, barrel tower bolts, of extruded section and fixed, conforming to the sample kept in the office of the GE (N) Pune

M&L for 150 mm bore pipe for Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in cement concrete, type D-2 , 1:4:8 complete all as specified and as directed.

M/L 150mm dia reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches complete all as specified and as directed.

S&F for 50 mm thick , 900x650 mm , heavy duty factory made precast RCC cover slab with frame, RCC in 1:2:4 type B1 using 20 mm graded stone aggregate including reinforcement with mild steel TMT bars 6mm dia @ 150 mm c/c both wasys and set in cement mortar 1:4, finished the surface even and fair complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors 75mm dia complete all as specified and as directed.

Ditto as per item no 147.00 as above but 110mm dia

S&F Stack Clamps out of (50mmx5mm) flat iron and 12mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for pipe 100mm bore complete all as specified and as directed.

M&L 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal bends with oval acess door complete all as specified and as directed.

M&L 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.

M&L for PVC (SWR) bends any radius of 75mm dia with oval and access door complete all as specified and as directed.

Ditto as per item no 152.00 as above but 110mm dia

M&LPVC (SWR) branch piece single Y equal or unequal of 75mm dia with access door complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 100 mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4). complete all as specified and as directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

M&L(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed.

S&F 25mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 15mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S and F in repairs Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity with brackets of approval Make and all necessary fittings etc complete all as directed and specified.

S&F vitreous chinaware wash hand basin, using pedestal size 550x400 mm including 15 mm dia pillar tap chromium plated, CP waste coupling, chain and plug, waste fittings, union and waste pipe 32 mm dia of required length and all necessary inlet outlet connections complete . Make - Hindware

S&F PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm at the ends complete all as specified and as directed.

S&F Towel rail 600 mm long of PTMT fixed with and including Chroimuim plated brass screws and wooden / plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.

S&F 15 mm bore dia CP fancy type Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and as directed.

S & Fs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and as directed.

S&F CP push cock with wall flange 15mm dia. Make : Prayag or equivalent complete all as specified and as directed.

Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded complete all as specified and as directed.

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 m in depth for foundation etc and getting out in hard/dense soil etc. complete all as specified and directed

M&L for plain cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregate) as in coping and similar work with & including necessary form work to receive fair finish complete all as specified and direceted

Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in window or or door cills, lintels, bressummers etc set in cement mortar 1:4 with joints to match complete all as specified and directed.

M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified(grade Fe-410-w (Gde E-250) quality-A) complete all as specified and directed.

S&F Mild steel, 1.25mm thickness plain black sheet in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coats of white washing complete all as specified and directed.

M&L 75mm thick Cement concrete flooring type B-2,1:2:4 (40mm graded aggregate) as in floor complete all as specified and as directed.

M&L 40mm thick Cement concrete flooring type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured tiles, 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4), including dismantling tiles and rubbish of the premises complete all as specified and directed.

Material and labour for coloured vitrified tiles 10mm thick (square/rectangular) polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling or any stone flooring including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Demolition of Cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for PCC (1:5:10) type E-2 (using 40 mm graded broken stone aggregate) as bed blocks/ bed plates including necessary form work all as specified and as directed.

Fixing in Repairs Wash Hand Basin, Vitreous china any size, including cutting for and pinning in ends of brackets or erecting stand including of fixing of suppy and waste pipe

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for One light point controlled by one, one way switch 5 Amps

Ditt all as per item no 191.00 above but for One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

Ditt all as per item no 191.00 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Ditt all as per item no 191.00 above but for One bell point controlled by one, bell switch 5 Amps

Ditt all as per item no 191.00 abovev but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

Ditt all as per item no 191.00 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply including removal of old unserviceable one complete all as specified and as directed

S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F for Modular switch one way 6 A, 1 module complete all as specified.

S & F for Modular switch one way 16 A, 1 module, with neon indicator complete all as specified.

S & F for Modular socket, 6A - 2/3 pin combined 2 module complete all as specified.

S & F for Modular socket, 6A/16A - 2/3 pin combined 2 module complete all as specified.

S & F for modular Bell push modular 6 Amps single module complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for wall mounted LED 20 watts with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed.

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro, Havells.

S & F for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified.

S & F for 12 watt LED bulb B-22, suitable for batten holder fitting completes all as specified.

S & F for Modular switch two way 6 A, 1 module complete all as specified.

S & F for steel body exhaust fan, AC single phase, 240 V of size 300 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed.

Taking down carefully ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan, replacement of fan condensor 2.5 Mfd and painted with synthatic enamel white colour paint by spray machine including filling of cavities with filler material complete all as specified and as directed.

S & F for MCB DB, SPN, sheet metal enclosure, 12 way with 200 amps rated bus bar double door, fixed on wall good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.

S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40 amps, 240 volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 amps, 240 V breaking capacity 10 KA complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC casing caping including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6.0 sqmm cable,one run of 6 sqmm cable and one run of PVC heavy duty concealed conduit will be measured as one unit

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (as per Cat Part No -Maxma DX 8" of Make- Bajaj or equivalent Make- of crompton/Havells)including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

L.T Associate

BAGESHWARY CONSTRUCTION

J P ASSOCIATES

M/s Asrani and sons

M/S Eknath agencies

Sai Construction

ganesh electricals and airconditioners

M/s RAJKUMAR MANIKRAO PATIL