Loading…
Loading…
Tender Value
₹3.5 L
EMD Value
₹7,079
Closing Date
21 Sept 2026, 11:00 amClosed
XEN CP3 SEC 16 CHD
O/o XEN CP3 SEC 16 CHD
RENOVATION ALTERATION WORK IN HOUSE NO. 234 (TYPE-V) SECTOR 16 CHANDIGARH.
2026_CHD_95181_1
CP3/2026/3082474
Open Tender
Civil Works
Percentage
30 days
SECTOR 16 CHANDIGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹7,079
21 Sept 2026
3 Sept 2026
21 Sept 2026
3 Sept 2026
21 Sept 2026
3 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge. | 28.95 | SQM | 46.8 | ₹1,354.86 |
| 2 | Providing and laying antiskid vitrified floor tiles of specified size (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand). The tiles are to be fixed by provding 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge. Size of tile 300x300 mm | 5.03 | SQM | 1,198.6 | ₹6,028.96 |
| 3 | Providing and laying 1st quality ceramic glazed wall tiles of size 300x450 mm conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make, in all colours, shades as approved by Engineer- in-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand). The tiles are to be fixed by provding 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge. | 23.92 | SQM | 1,113.5 | ₹26,634.92 |
| 4 | Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge. | 23.92 | SQM | 9,686.95 | ₹2,31,711.84 |
| 5 | Providing and fixing golden champ jaffery on compound wall with frame of golden champ section 2” x 1.3/8” as horizontal member and vertical members fixed with golden champ and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. The top of jaffery is to be covered with another strip of 2 x 1.3/8”. The complete panel is to fixed over existing wall and M.S. angle with iron nuts and bolts etc. The complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. | 18.81 | SQM | 2,125.65 | ₹39,983.48 |
| 6 | Providing and fixing 6'-0" golden champ wood jaffery on compound wall with frame of hard wood section 2” x 1.3/8” as horizontal member and vertical members fixed with hard wood and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. The top of jaffery is to be covered with another strip of 2 x 1.3/8”. The complete panel is to fixed over existing wall and M.S. angle with iron nuts and bolts etc. The complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. | 26.76 | SQM | 1,793.5 | ₹47,994.06 |
| 7 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 0.94 | CUM | 256.82 | ₹241.41 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_116871.xls
BOQ • 0.32 MB
DATE189.pdf
PDF • 0.06 MB
date1699.pdf
PDF • 0.07 MB
date149.pdf
PDF • 0.07 MB
daye.pdf
PDF • 0.53 MB
DATE99.pdf
PDF • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .