CONVERSION OF HT/LT OH CONDUCTORS INTO UG HT/LT CONDUCTORS AND ALLIED INFRA AT CERTAIN LOCATION AT SHILLONG UNDER GE SHILLONG

Amount

NOTE (Applicable for all items):- The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' BOQ

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sq. mm 3 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 Core complete all as directed.

Supply, laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 Core complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in any type of soil complete all as specified and as directed.

Removing excavated material / surplus soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for laying clean river sand in trenches for cable protection including spreading, levelling, punning complete all as specified and as directed. Note : Punned thickness shall be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1, flat, size 300mm x 180mm x 40mm complete all as specified and as directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm complete all as specified and as directed.

Dismantling of ACSR or AAC conductors complete all as specified and directed.

Dismantling insulators any type, any size complete all as specified and directed.

Dismantling cross-arms, bracing supports of MS channel or angle section etc. complete all as specified and directed.

Dismantling steel poles/ struts, any size complete all as specified and directed.

Supply and fixing factory made Junction Box , IP-66 (weather proof) , outdoor installation for street light of size 155 mm x 210 mm x 92 mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal including MCB SP 6 Amps rating 10 KA with locking arrangement and suitable size cable glands complete all as specified and directed. Make : HENSEL Cat No DK 1600 G or equivalent in Sintex/L&T/Siemens/Legrand

Supply and fixing 2.5 sqmm 3 core aluminium conductor cable PVC insulated for connecting street light to the junction box through the pole complete all as specified and directed

M&L for Boring of holes under road , pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 400 Amps,36 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 200 Amps, 25 kA - 3 Nos (ii)MCCB 4 Pole, 160 Amps, 16kA -1No (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS ) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 160 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA - 5 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 200 Amps, 25 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 160 Amps, 16 kA - 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA - 3 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 160 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16kA - 4 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS ) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 200 Amps, 25 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 100 Amps, 16 kA - 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA -4 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 100 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 40 Amps, 16 kA - 2 Nos (ii)MCCB 4 Pole, 32 Amps, 16kA - 2 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 200 Amps, 25 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA - 5 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 63 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 32 Amps, 16 kA - 3 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 500 Amps, 36 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 320 Amps,25 kA - 2 Nos (ii)MCCB 4 Pole, 200 Amps , 25 kA -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 320 Amps, 25 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 2 Nos (ii)MCCB 4 Pole, 125 Amps , 16 kA -3 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 125 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 160 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 40 Amps, 16 kA- 8 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 160 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 40 Amps, 16 kA- 8 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :-PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 320 Amps, 25 kA - 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 250 Amps, 25 kA - 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA -6 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps , 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA- 4 Nos (ii)MCCB 4 Pole, 32 Amps, 16 kA- 1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 2 Nos (iii)MCCB 4 Pole, 32 Amps, 16 kA- 2 Nos (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos (ii)MCCB 4 Pole, 32 Amps, 16 kA- 2 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 320 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 2 Nos (iii)MCCB 4 Pole, 32 Amps, 16 kA- 2 Nos (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 4 No (iv) MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 40 Amps, 16 kA- 3 Nos (ii)MCCB 4 Pole, 32 Amps, 16 kA- 2 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 3 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 3 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 3 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 400 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 3 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (iii) MCCB 4 Pole, 40 Amps, 16 kA-3 Nos (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 63 Amps, 16 kA-1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i) MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA-2 Nos (ii)MCCB 4 Pole, 32 Amps, 16 kA- 4 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 500 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 100 Amps, 16 kA- 3 Nos (iv)MCCB 4 Pole, 63 Amps, 16 kA- 1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 63 Amps, 16 kA-2 Nos (ii)MCCB 4 Pole, 32 Amps, 16 kA- 2 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 2 Nos (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA-1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Mullti function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA-4 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 32 Amps, 16 kA-3 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 63 Amps, 16 kA-1 No (ii)MCCB 4 Pole, 32 Amps, 16 kA- 3 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 32 Amps, 16 kA- 3 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 32 Amps, 16 kA- 4 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 2 Nos (iii)MCCB 4 Pole, 32 Amps, 16 kA- 1 No (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 63 Amps, 16 kA- 2 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 630 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 320 Amps, 25 kA- 2 Nos (ii)MCCB 4 Pole, 200 Amps, 25 kA- 2 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 8 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Muli function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA- 4 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 3 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA- 3 Nos (ii)MCCB 4 Pole, 40 Amps, 16 kA- 3 Nos (iii)MCCB 4 Pole, 32 Amps, 16 kA- 1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 2 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA- 3 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 400 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 2 Nos (ii)MCCB 4 Pole, 100 Amps, 16 kA- 2 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 4 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 1 No (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 63 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 2 Nos (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 63 Amps, 16 kA- 5 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 3 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box(CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 Nos (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 400 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 5 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 400 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos (iii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iv)Analogue Time Switch - 1 No (v)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 10 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 630 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 400 Amps, 36 kA- 1 No (ii)MCCB 4 Pole, 250 Amps, 25 kA- 1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 400 Amps, 36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MMCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 8 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 KA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 63 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 40 Amps, 16 kA- 8 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 250 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 7 Nos Note :-PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 400 Amps,36 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii)MCCB 4 Pole, 100 Amps, 16 kA- 1 No (iii)MCCB 4 Pole, 40 Amps, 16 kA- 4 Nos (iv)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (v)Analogue Time Switch - 1 No (vi)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 KA- 6 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 160 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 7 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 200 Amps, 25 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 40 Amps, 16 kA- 10 Nos Note :- PCC for foundation and earthwork shall be measured and paid separately.

Supply, install , testing and commissioning of outdoor LT distribution feeder pillar box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and aluminium bus bar of suitable Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 125 Amps, 16 kA- 1 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 4 Pole, 32 Amps, 16 kA- 7 Nos (ii)MCB, 3 Pole, 20 Amps, 10 kA- 1 No (iii)Analogue Time Switch - 1 No (iv)3 Pole Contactor 25 Amps -1 No Note :- PCC for foundation and earthwork shall be measured and paid separately.

S&F cable route indicator made out of 35x35x6mm angle iron 150mm clear height with 100mm embedded in PCC 1:3:6 type C1 (using 20mm graded stone aggregate) block of size 200x200x200mm with letter MES HT cable suitably inscribed on CI circular plate 100mm dia 5mm thick welded with angle iron including necessary earth work and two coat of synthetic enamel paint brown colour over a coat of redoxide primer on steel surface complete all as specified and directed.

S&F cable route indicator made out of 35x35x6mm angle iron 150mm clear height with 100mm embedded in PCC 1:3:6 type C1 (using 20mm graded stone aggregate) block of size 200x200x200mm with letter MES LT cable suitably inscribed on CI circular plate 100mm dia 5mm thick welded with angle iron including necessary earth work and two coat of synthetic enamel paint blue colour over a coat of redoxide primer on steel surface complete all as specified and directed.

S&F HT cable jointing kit 11000Volts earthed grade cable for Straight through joint, heat shrink type joint, complete with jointing material and accessories suitble for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm all as specified and directed.

S&F HT cable jointing kit 11000Volts earthed grade cable for end termination out door type joint, heat shrink type joint, complete with jointing material and accessories suitble for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm all as specified and directed.

S&F LT cable jointing kit 1100Volts grade cable for Straight through joint, cold shrink type, complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 240 to 300 Sqmm complete all as specified and directed.

M & L for cutting existing bituminous road surfaces 150 mm thick, for laying of cables, making good with PCC 1:3:6 type C1 (using 20 mm graded aggregate) to match with the adjustant surface. Note:- Excavation and earth work below 150 mm thick will be measured and paid under relevent items.

Supply and laying or fixing 50mm bore GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed.

Supply and laying or fixing 80mm bore GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed.

M&L for Earthing complete with GI plate Electrode of size 60 Cm X 60 Cm X 6 mm thick burried directly in ground vertically at a depth not less than 2.25 metre below normal ground level, with top edge of earth plate at a depth not less than 1.5 metre. below normal ground level , connected to galvanised iron strip of size 32 X 6 mm earth lead by means of bolts, nuts and washers of galvanised iron , earth lead strip protected by means of 40 mm bore dia light grade GI pipe up to switch board / panel board and 20 mm bore galvanised iron pipe medium grade for watering with GI funnel and wire mesh , all as specified and shown in MES schedule Electrical Plate No:-3 of SSR Part I, including excavation and earth work in any type of soil , PCC 1 : 3 : 6 type C1 in chamber , RCC 1:2:4 type B1 50 mm thick cover slab with 6 mm dia MS bars at 100 mm centre to centre both ways, and provision of 6 mm dia MS hook, Charcoal and common salt in alternate layers complete and testing the earth resistance and writing on the chamber by paint all as specified and as directed.

M&L for PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in in foundations, filling and mass concrete complete all as specified and directed

BHARAT MULTITECH INDUSTRIES PVT LTD

M/s T. S. POWER CO.

M.S. Construction

ms singh construction

HAMTECH ENGINEERING PRIVATE LIMITED

Garg Brothers

N.V.ENGINEERING

Mars Developments

Vinayaka Enterprises

EVERLITE ENGINEERING INDUSTRIES