Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹44.4 L+₹1.7 L (3.94%)Rejected-Finance | L2 | Rejected-Finance BIDDER NOT LOWEST | |
| 3 | L3₹45.2 L+₹2.5 L (5.76%)Rejected-Finance | L3 | Rejected-Finance BIDDER NOT LOWEST | |
| 4 | L4₹49.6 L+₹6.9 L (16.2%)Rejected-Finance | L4 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹48.9 L
EMD Value
₹97,800
Closing Date
21 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST DELHI CANTT 10
GE WEST DELHI CANTT 10
PROVN OF CERTAIN SANCTION WORK OF 6 SIKH 255 TRANSIT CAMP AND 7 JAT IN THE AREA OF AGE BR I UNDER GE WEST DELHI CANTT 10
2022_MES_545599_1
GE/DW-74/2022-23
Open Tender
Civil Works
Item Rate
180 days
DELHI CANTT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE WEST DELHI CANTT
₹97,800
13 Mar 2023
23 Jan 2023
23 Feb 2023
24 Jan 2023
21 Feb 2023
8 Feb 2023
Amount
Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in any type of soil complete all as specified and as directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material beyond MoD area and depositing where directed at a level the starting point complete all as specified and as directed
Filling under floor, spreading and levelling in layers n exc 25cm thick well raming including watering as requred complete all as specified and directed
M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and as directed
M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface under sub base flooring or plinth protection etc complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed
M&L for RCC M25 design mix, using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed
M&l for RCC M25 design mix, using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed
M&L for RCC M25 design mix using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed
M&L for RCC M25 design mix using 20mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed
M&L for RCC M25 design mix using 20mm graded stone aggregate in Chajjas complete all as specified and as directed.
Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
Use and waste for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.for rough finish surface complete all as specified and as directed.
Use and waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface complete all as specified and as directed.
Use and waste for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, complete all as specified and as directed.
Use and waste for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed
Use and waste Formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and as directed
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
Ditto as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed .
M&L for PCC 1:3:6 type C-2 (20 mm graded agg) as in surface channel/drain / haunching of manhole etc. complete all as specified and as directed
M&L for Glazed ceramic tiles in vertical surface area of each tile exceeding 0.13 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bedding/backing in CM 1:4 complete all as specified and as directed
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thic screed bedding layer in CM 1:6 complete all as specified and as directed.
M&L for vitreous china wash hand basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwd shanks and fly nuts, 32x600mm long PVC waste pipe complete
M&L for Ready Mix plaster 15mm thick on brick or concrete surface of internal and external walls finished even and fair surface without using extra cement complete all as specified and as directed.
M&L for 15mm thick cement plaster on brick or concrete surface in CM 1:6 finished even and fair surface without using extra cement complete all as specified and as directed.
M&L for Ready Mix plaster 5mm thick on concrete surface of ceiling finished even and fair surface without using extra cement complete all as specified and as directed.
M&L for brick work in cement morta 1:6 using sub class B bricks, straight or curved on plan exc 6mtr mean radius complete all as specified and directed.
M&L for 40mm thick DPC on horizontal or vertical surface in PCC 1:2:4 type B0 using 12.5mm graded stone aggregate including necessary formwork and using WPC as per Manufacturer insruction and complete all as specified and as directed.
Preparation of newly plastered surface on wall and applying two coats of cement based paint over one coat of primer white or tinted complete all as specified and as directed.
Ditto but three coats of white lime wash or tinted complete all as specified and as directed.
Ditto but three coats of white lime wash on ceiling complete all as specified and as directed.
M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing as per manufacturer's instructions complete all as spd and directed. Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer. 3. The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65X50mm size & making good in CM 1:3. complete all as specified and directed.
M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface on wall/roof surface including using WPC as per manufacturer instruction
M&L for sand bedding/cushioning under interlocking tiles/ floor complete all as specified and as directed.
M&L for minimum 80mm thick precast PCC interlocking blocks of grade M-40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 in equal proportion of grey and coloured tile to make a pattern as directed complete all as specified and directed.
S&F pre cast concrete block for kerb stoen with solid block ex 10cm in width type C1, 1:3:6 (using 20mm graded stone aggregate ) set in CM 1:6 of any shape and size. Kerb stone shall be fixed in true line and level or incurves for edging of road side path including embedding in ground to any depth as reqd complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 ,bed concrete to 150mm bore dia drain pipes (of 100mm thick) including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and as directed.
M&L for 150mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating complete all as specified and as directed.
M&L for 75mm thick SFRC manhole/drain cover size not exc 1.00sqm each set and jonted in cement mortar 1:4 complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.
S&F 150 mm long aluminium anodised barrel tower bolt extruded section complete all as specified and as directed.
S&F 150mm long extruded aluminium alloy handle complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
S&F 4mm thick pin headed, figured glass with oil putty in square n exc 0.50 sq m in each pane complete all as specified and as directed.
M&L for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S&F for 15mm bore galvanised iron pipe medium grade with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed
S&F for 20mm bore galvanised iron pipe medium grade with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed
S&F for 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F 20mm float ball valve high pressure of PTMT with epoxy coted aluminium rod & high density plastic bal serewed for ison pipe complete all as specified and as directed.
S&F brass body chromium plated fancy type health faucet with chromium plated 1mtr long pipe complete all as specified and as directed.
S&F vitreous china white european type WC with "P" or "S" trap including connection to drain pipes, traps and PVC flushing cistern with pipe 32mm dia PVC flush pipe including PVC seat cover and fixing bolts complete all as specified and directed.
S&F vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.
S&F 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
M&L for Bib tap fancy type, chromium plated for 15mm bore of pipe, cast copper alloy with crutch or butter fly handle, screwed for iron pipe complete all as specified and as directed.
M&L for stop vale/angle vave cast copper alloy chroumium plated fancy type for 15mm bore dia of pipe complete all as specified and as directed.
S&F 15mm bore dia pillar tape cast copper alloy chromium plated fancy type screwed down for high pressure pipe complete all as specified and as directed.
S &F in repairs brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc.complete all as specified and as directed.
S&F 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washers complete all as specified and as directed.
S&F for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F in repairs vitreous china full stall urinals,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe all as specified and as directed.
M&L for 75mm out let diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall or laid in trenches complete all as specified and as directed.
S&F in 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.
S&F in 75mm bore PVC (SWR) bends with acess door any radius all as specified and direction
M&L for 110mm bore PVC (SWR) pipe conforming to relevant IS single socketed in any length with rubber ring joint and fixed to wall complete incl taking down old rain water pipes complete all as specified and as directed.
S&F 110mm bore PVC (SWR) bends any radius all as specified and direction complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door any radius all as specified and direction complete all as specified and as directed.
S&F 110mm bore PVC (SWR) vent cowl any radius all as specified and direction
M&L for 18-20mm thick diamond cut, diamond pre-polished kota stone slab flooring area of each stone slab exceeding 0.30sqm and not exceeding 1.50sqm each (as approved by GE) in floor, steps laid over and including cement screed base 15mm thick screed bedding layer in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding & bull nosing on the edges and polishing including applying cement slury @ 3kg per sqm and including M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.
M&L for 18-20mm thick diamond cut, diamond pre-polished kota stone as in skirting or dado over and including 10mm thick cement plaster in CM 1:4 and jointed and with grey cement slurry mixed with pigment to match the shade of the slab including taking down cement plaster complete all as specified and as directed.
M&L for preparation of wall surface by complete removal of existing treatment by mechanical means and applying two coat coats of white lime wash complete all as specified and as directed..
M&L for preparation of ceiling surface and applying one coat of white lime wash complete all as specified and as directed.
M&L for preparation of wooden surface exc 10cm girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of steel based surface exc 10cm width or girth and applying one coat of syinthetic enamel paint complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed.
Preparing surface by complete removal of existing treatment of wall any layer incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots all as specified and directed
M&L for applying two coat cement base paint on old prepared surface all as specified and directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Taking down and refixing in the same opening door shutters of any description exc 1 sq. m but n.exc 2 sqm each including necessary fittings required at site
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in any type soil and removing debrish beyond MOD land
PCC 1:2:4 type B1 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specificed and as directed by Engr-in-Charge.
M & L Cement concrete type B1 1:2:4 (20mm graded aggregate) and finished the surface even and smooth without using extra cement as in Floors and pavings, etc all as specified and as directed.
Forming 12 mm thick expansion joints filled with pre formed bituminous filler and top 30 mm primed and sealed with sealing compound Gade A complete all as specified and as directed.
M&L for mild steel work with square/rectangular section in post, Roof trusses (framed), trussed, purlins, rafter, crane gantries, wind ties, rails and fastenings and heavy bracket, framing of tube sections including distance pieces, cleats, MS plates, nut & bolts etc complete all as specified and as directed.
S&F of Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed.
S & F of 1.25 mm thick pressed steel frame of size 165 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
S & F for 35mm thick 2nd plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.
S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified.
S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Ditto as per item above but without glazing bars complete all as specified.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in Ramp laid in bays and finished even and fair incl filling the joint with bitumens mastic complete all as specified and directed.
M & L Cement concrete type B1 1:2:4 (20mm graded aggregate) and finished the surface even and smooth without using extra cement as in Floors and pavings, etc all as specified and as directed.
S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple and one shop coat of primer and erect with gear operated type with bevel gear box and crank handle, with 1.25 mm thick laths all as specified and directed.
Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :- (a) One light/fan/bell point controlled by one way switch 5 amps.
(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.
(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.
Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board
S&F of switch pian type 5 amps single pole one way complete all as specified and directed.
S&F of switch piano type 15 amps single pole one way complete all as specified and directed.
S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.
S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.
S & F of Lamp holder,PVC /Polycarbonete type with back plate suitable for batten fittings with connections complete all as specified and directed
S&F of LED bulb of 9 watt complete all as specified and directed.
S&F Exhaust fan metallic type ventilating single phase 230/240V of 300mm sweep with Louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete complete all as specified and directed.
Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.
S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
S&F of electric storage water heater of capacity 25 ltr BEE 5 star with vtreous enamel coating with all accessories and fittings arrangements and testing after installation complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply laying testing and commissioning of XLPE insulated armoured heavy duty electric cable with aluminumstranded copper conductor 1100 volt grade crosssectional area 16 Sqmm 2 core LT cable complete all as specified directed
Deduct Credit: for demolished/dismantled material of (-) Rs 0.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum
UNIQUE BUILDERS
JAIPAL AND BROTHERS
M/S Davinder Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .