FRP and Epoxy Job of tanks in Plating Shop

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)

PAN No.:

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs:

Please Enter Turn over in Rupees for all the 3 years

Details of Registered Contractor

ESI No.:

GST Detail:

Please Enter GST Details

Related Document to be uploaded in ePortal

Contact details

Please Enter Contact person Name

Please Enter Mobile No

Valid Electrical contractor licence of appropriate voltage issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 and as amended from time to time or to declare engage an electrical contractor who has the above mentioned licence and requisite experience.

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender.

Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II

work done

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III

Details of person holding the power of Attorney :

Related Document to be Uploaded to eProcurement Portal

Please Enter Details for Person holding Power of Attorney

DECLARATION I

Please Accept the Declaration I

DECLARATION II

Please Accept the Declaration II

The payment terms shall be governed as per the terms indicated in special conditions of contract.

Basic Rate to be quoted for each item. Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

Successful offer that is L-1 (Lowest offer) will be determined including GST.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguity in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

Specification of item

Chemical Milling CP-1 Size 2440 X 900 X 1040 mm Temp. 85-90 NAOH (as per Scope of Work).

3mm thick FRP lining inside the tank with Epoxy/ Vinyle Easter. Surface cleaning of the tank from outside by mechanical means followed by 1mm thick Epoxy lining with surface mat finish except outside bottom. Fabrication and errection of exhaust duct & hood of PP with hadder connection. Proving & erection of PP Lid with SS hinges and handles.

Surface cleaning of the tank from outside by mechanical means followed by 1mm thick Epoxy lining with surface mat finish except outside bottom.

Fabrication and errection of exhaust duct & hood of PP with hadder connection.

Proving & erection of PP Lid with SS hinges and handles.

Dip Spray Rinsing CP-2 Size: 2440 X 900 X 1040 mm at Water (as per Scope of Work).

3MM Thick FRP Lining Inside Tank with Isopthalic Polyester Resin.

1mm thick FRP Lining outside tank with proper cleaning.

To provide and fixing of a PVC Pipe from outlet to drain.

Chemical Milling Nitric Acid Brightining C-3 Size 2440 X 900 X 1040mm at HNO3 (as per Scope of Work).

DIP Spray Rinsing CP-4 Size 2440 X 900 X 1040 mm of Water (as per Scope of Work).

3mm thick FRP line inside tank with Isopthalic Polyster Resin.

1mm thick FRP Lining outside tank with proper cleaning.

To provide & erect PVC outlet pipe upto drain.

To replace old inlet pipe along with a valve.

Warm DM Water Rinsing CP-5 Size 2440 X 900 X 1040 mm at Water (as per Scope of Work).

3mm thick FRP line inside tank with Isopthalic Polyster Resin.

1mm thick FRP Lining outside tank with proper cleaning.

To provide & erect PVC outlet pipe upto drain.

Hard Chrome Sulphuric Acid Pickling Bath HC-1 Size 1000 X 500 X 500mm Sulphuric (as per Scope of Work).

3mm thick FRP lining Inside Tank with vinyle easter.

1mm thick FRP lining outside tank with Isopthalic Resin.

Hard Chrome Rinsing Tank HC-2 Size 1000 X 500 X 500 mm at Water (as per Scope of Work).

Acid proof 3mm thick FRP lining inside tank.

1mm thick FRP lining Inside Tank

Hard Chrome Plating HC-3 Size 1000 X 500 X 500mm Temp. 50-55 deg. Celcius Chromic Acid (as per Scope of Work).

Nickle Plating Pickling in Sulphuric Acid NP-1 Size 1000 X 500 X 500mm at Sulphuric (as per Scope of Work).

3mm thick FRP lining with Vinyle easter outside tank.

Outside 1mm thick acid proof lining.

PP lid with SS hinges & Lid.

Nickle Plating Rinsing NP-2 Size 1000 X 500 X 500 mm at Water (as per Scope of Work).

FRP Lining of the Tank 3mm thick with Isopthalic Resin.

1mm thick FRP lining outside the tank.

Nickle Plating NP-3 Size 1000 X 500 X 500mm Temp. 40-50 Deg. Cel. Nickle Sulphate Boric Acid (as per Scope of Work).

3mm thick FRP lining Inside Tank with vinyle easter.

To provide PP lid with SS hinges and handle.

Nickle Plating Rinsing NP-4 Size 1000 X 500 X 500mm Temp. 40-50 Deg. Cel. at water (as per Scope of Work).

3mm FRP lining acid resistant inside the tank.

1mm thick FRP lining outside the tank.

ECO Hard Chrome Process Spare Tank for Degreasing SP-1 Size 1000 X 500 X 500 Temp. 60 Deg. Cel (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid resistant lining.

Outside Eco Hard Chrome Process Spare Tank for Etching SP-2 Size 1000 X 500 X 500 mm Temp. 60 Deg. Cel (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid resistant lining.

Provision of PP Lid with SS hinges & handle

ECO Hard Chrome Process Spare Tank for Activation Process SP-3 Size 1000 X 500 X 500 Temp. 60 Deg. Cel. (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid resistant lining.

Provision of PP Lid with SS hinges & handle

ECO Hard Chrome Process Spare Tank for Nickel Process SP-4 Size 1000 X 500 X 500 Temp. 60 Deg. Cel. (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid resistant lining.

ECO Hard Chrome Process Spare Tank for Nickel Process SP-5 Size 1000 X 500 X 500 Temp. 60 Deg. Cel. (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid resistant lining.

Provision of PP Lid with SS hinges & handle

ECO Hard Chrome Process Spare Tank for Blu- Chrome Process SP-6 Size 1000 X 500 X 500 Temp. 60 Deg. Cel. (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid resistant lining.

Provision of PP Lid with SS hinges & handle

Copper Plating Pre Cleaning of Copper Plating CU 1 Size 1000 X 420 X 500mm Temp. 60 Deg. Cel. (as per Scope of Work).

Inside Tank 3mm Thick FRP lining with Epoxy.

Outside 1mm Thick FRP lining with Epoxy.

Copper Plating Rinsing CU- 2 Size 1000 X 420 X 500mm at water (as per Scope of Work).

Inside Tank 3mm Thick FRP lining.

Outside 1mm Thick FRP lining.

Copper Plating Acid Cleaning CU- 3 Size 1000 X 420 X 500mm at HCL (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid proof lining.

Copper Plating Rinsing CU- 4 Size 1000 X 420 X 500mm at Water (as per Scope of Work).

Inside Tank 3mm Thick FRP lining.

Outside 1mm Thick FRP lining.

Copper Plating CU- 5 Size 1000 X 420 X 500mm at Rochelle Salt, KOH (as per Scope of Work).

3mm thick lining with Vinyle easter inside tank.

Outside 1mm thick acid Resistant lining.

Copper Plating Rinsing CU- 6 Size 1000 X 420 X 500mm at water (as per Scope of Work).

Inside 3mm Acid Resistant Lining.

Outside 1mm thick acid Resistant lining.

No Rupees Only