Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC | ₹21.2 L Quoted ₹22.3 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹22.4 L+₹9,934 (0.44%)Rejected-Finance | ₹22.4 L+₹9,934 (0.44%) | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹24.1 L+₹1.7 L (7.74%)Rejected-Finance | ₹24.1 L+₹1.7 L (7.74%) | L3 | Rejected-Finance Other than Lowest |
| 4 | L4₹26.2 L+₹3.8 L (17.1%)Rejected-Finance 20 A 2ND FLOOR BLOCK C RAJEEV NAGAR BEGUMPUR DELHI 110086 | NORTH WEST | DELHI | 110086 | ₹26.2 L+₹3.8 L (17.1%) | L4 | Rejected-Finance Other than Lowest |
| 5 | L5₹31.8 L+₹9.5 L (42.3%)Rejected-Finance | ₹31.8 L+₹9.5 L (42.3%) | L5 | Rejected-Finance Other than Lowest |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
10 Jan 2022, 6:00 pmClosed
GE NASIRABAD
GE Nasirabad Nasirabad cant, Pin 305601 (raj)
MISC B/R NATURE OF WORKS INCLUDING FLOORING, PLASTERING AND PLUMBING WORKS IN RA LINE -II ZONE C OF CENTRAL AREA
2021_MES_485021_2
8164/E8
Open Tender
Civil Works
Item Rate
335 days
NASIRABAD
AS PER NIT and Class D and above and category a(i) Building Works
6 documents required · 6 mandatory
₹500
GE NASIRABAD
₹56,000
Yes
4 Feb 2022
11 Dec 2021
12 Jan 2022
11 Dec 2021
10 Jan 2022
27 Dec 2021
11 Dec 2021 - 20 Dec 2021
Amount
Taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L for rendering 15mm thick in CM (1:4) on stone masonry wall on external surfaces finished fair and even complete all as specified and directed.
M & L for rendering 15mm thick in CM (1:6) on stone masonry wall surfaces finished fair and even complete all as specified and directed.
M & L for rendering 10mm thick in CM (1:4) on ceiling surfaces finished fair and even complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of putty 1 mm thick (Birla/JK) complete all as specified & directed.
M&L for prepartion of new plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and directed.
M&L for prepartion of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L for preparation of new decorative plastered surface of wall and applying two coat of cement base paint complete all as specified and directed
Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.
M&L for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in CM (1:6) complete all as specified and directed.
All as per sl item no 10.00 here in before but except stone. NOTE: Old serviceable stones/brick retrieved vide Sl Item no 9.00 shall be reused.
Extra over stone walling of random rubble, uncoursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified and directed.
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping, bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.
Dismantling hearth or wall tiles including cement mortar and rubbish off the premises, complete all as specified and directed.
M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.
All as per Sl item no 15.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.
M & L for glazed ceramic coloured tiles, 6 to 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces of wall such as dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile over and including 10mm thick screed plaster in CM (1:4) complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-1 using 20.00mm graded stone aggregate as in floor complete all as specified and directed.
Demolition of cement concrete (unreinforced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.
M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternate bays n.exc 2m in length all as specified and directed.
M & L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick with grey cement and no pigments as in floor set, jointed and pointed in neat cement slurry laid over and including 20mm thick cement screed base in CM 1:6 complete all as specified and directed.
Taking down of old boards and M&L 18/19mm thick block board grade-II quality interior grade with decorative type with decorative face veneer on one face fixed complete including teak wood lipping 19x6mm thick fixed with nails in shelves, partion and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board and similar work complete all as specified and directed.
S&F continuous (piano) hinges mild steel bright finish or electrogalvanised of 30mm width of flaps (when open) complete all as spepcified and directed.
S & F plain, solid, straight chowkhats or frame of 2nd class hard wood Hollock/Bansum/Sal rebated on solid put together with pinned at joints complete all as specified and directed.
S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.
S & F 100mm size hasp and staple, aluminium anodised, safety type, including bolt to hinge plate complete all as specified and directed
S&F in repair fancy type aluminium curtain rods 22 mm dia powder coated complete all as specified and directed.
S & F MS powder colour coated, decorative type knobs with bracket fixed at end of pelmet rod suitable for 22mm dia complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.
S & F in repairs 140 mm long aluminium alloy body door stopper fixing on door complete all as specified.
Taking down eaves gutters and rain water pipe of any size and desription including all fittings, complete, all as directed by Engr-In-Charge.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints, laid in trenches or in floors complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F in repairs PVC (SWR) nahani trap plain with PTMT grating including setting and jointing with solvent cement, diameter of outlet 110 mm bore, complete, all as specified and directed.
S & F in repair bib taps ISI marked, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore of pipe complete all as specified and directed.
S & F in repair stop valve, 15mm bore, cast copper alloy fancy type, chromium plated with long shank & cup, screwed down, high pressure, screwed both ends for iron pipes complete all as specified and directed.
S & F in repair 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete, all as specified & directed.
Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.
All as per item No. 41.00 here-in-before but 20mm dia
All as per item No. 41.00 here-in-before but 25mm dia
Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.
All as per item No. 44.00 here-in-before but 20mm dia
All as per item No. 44.00 here-in-before but 25mm dia
M & L for refixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed.
All as per item No. 47.00 here-in-before but 20mm dia
All as per item No. 47.00 here-in-before but 25mm dia
Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed
Dubbing out average 10mm thick in CM (1:4) on irregular faces of walls or consrete chajjas etc complete all as specified and directed.
Dismantling stone slab in roofs, suspended floors, chhajja, landing etc any thickness, jointed in any mortar complete all as specified &directed
M&L 50mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n.exc 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed
S&F in repair pillar tap,15mm bore, cast copper alloy, chromium plated, fancy type, screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S & F in repair brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.
Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.
Taking down old unserviceable WHB and S&F vitreous China, coloured, wash hand basin flat back of size 550 x 400mm including waste coupling, waste pipe etc complete all as specified and directed
S & F in repair PVC valve less, syphonic action type flushing cistern, ISI marked, 10 litre capacity, low level, white/ivory colour, with inlet, ball valve, float, handle fixed with PVC rawl plug of suitable size complete all as specified and directed.
S&F in repairs 15 mm bore bib taps standard of PTMT any colour, screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and directed.
Taking down old unserviceable china clay sink and S&F kitchen sink without drainage board overall size not less than 495x429, bowl size 410x 330x 160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed.
M&L for applying bitumen blown any grade applied two coats to concrete surface @ 1.50 Kg/ Sqm per coat with supply & fixing of polythene film black 50 micron laid in sunken portion complete all as specified and directed. NOTE :- WPC will be measured and paid separately
Supply only liquid water proofing compound complete all as specified & directed.
M&L for mass concrete filling in PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in sunken floor complete all as specified and directed.
S&F in repairs stainless steel plate rack made of size 610mm x 914mm x 254mm complete all as specified and directed. Make:- Prayag Cat part No. 336 or equivalent make and model as approved by AO.
S & F in repair white colour rotational moulded polyethylene (HDPE) water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted, double layer, ISI marked hoisted and fixed in position complete all as specified and directed.
Supply only mild steel clamp made out of 50mm by 5mm flat iron and 16mm mm dia round iron stays fixed to pipe of bore 110mmof complete all as specified and directed.
S&F in repair tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.
R.S BUILDERS
M/s Jai Jinendra Constructions
Shree Sai Ram Enterprises
kirtiman traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .