Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC 86 MAHEWA EAST NAINI PRAYAGRAJ U P | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L1 | Accepted-AOC Lowest quoted tenderer | |
| 2 | L2₹31.0 L+₹94,805 (3.15%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹33.8 L+₹3.7 L (12.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | L4₹3.8 Cr+₹3.5 Cr (1176.5%)Rejected-Finance | L4 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
Refer Docs
EMD Value
₹76,540
Closing Date
21 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Allahabad
HQ CWE New Cantt Allahabad
SPECIAL REPAIR TO ROAD AND ALLIED WORKS AT FORT CANTT UNDER GE (EAST) ALLAHABAD.
2022_MES_529827_1
81678/E/E8
Open Tender
Civil Works
Item Rate
180 days
Allahabad
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (East) Allahabad
₹76,540
Yes
16 Sept 2022
9 Jun 2022
23 Jul 2022
10 Jun 2022
21 Jul 2022
23 Jun 2022
Amount
M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm and depth exc 50mm but n. exc. 100mm and stacking complete all as specified and directed.
M&L for 75mm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) in single layer of 75mm thick using granite, trap or basalt stone aggregate, spread, rolled and consolidated to gradient and camber required using 8 to 10 tonne power road roller complete all as specified and directed by Engineer in Charge.
All as per item No. 2.00 above but except materials.
M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting required (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller for pot holes exc 30mm depth complete all as specified and directed.
M&L for preparing WBM surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 10 Kg per Ten Sqm on WBM surface for laying bituminous macadam over WBM surfaces complete all as specified and directed at site by Engr-in-Charge.
M&L for bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 ton per hour using crushed stone aggregete of specified grading premixed with bituminous binder VG-30 grade @ 4% by weight of total mix transporting the hot mix and filler to work site, spreading and laying with a hydrostatic mechanical paver and roller to required camber/ gradient rolled and compacted to smooth uniform surface with vibratory and tandem 8 to 10 ton power roller to achieve desired compaction (consolidated thickness not exceeding 75mm thick) complete all as specified and directed.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.
Dismantling concrete stone set paver block of any description or thickness laid dry and pointed including demolition of concrete paver block, stacking of layed sand and cleaning paver for re-using at same location complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling, sub base and mass concrete complete all as specified and directed.
M&L for 60mm thick M-35 grade factory made rubber moulded machine pressed precast cement concrete interlocking paver block in approved design and colour conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.
All as per item No. 10.00 here-in-before, but accept paver block.
M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded crusted stone aggregate) as in kerb and side of paver blocks etc complete all as specified and directed.
M&L for cleaning old dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. NOTE: Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS.
S&F in repair cat eyes ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses, temperature resistance body of size 90x110x17mm fixed on road with bituminous adhesive as per manufactures instruction having resistant creamer coating and reflective surface complete all as specified and directed. Make:- 3M/Dark Eye/ Avery denson
S&F in repair smart solar road studs of size 125x125x20mm thick and 55mm long 40mm dia stand with 6 Nos diod bulbs (3 Nos each side) electronically operated and designed to operate automatically in the darkness powered from rechargeble nickel cadmium battery to be charged through solar cells and yellow reflective polycarbonate cover solar cells and yellow reflective polycarbonate cover on side complete all as specified and as directed. Make- Dark Eye/3M or equivalent as approved by GE.
M/S A P CONSTRUCTION
M/S ATUL CONSTRUCTION
M/s Rahul Kumar Agrawal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .