Construction of RCC drain and road from Gopal Pandits house to Indu Factory in Palika Nagar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil.

Extra lead up to 4 km. Cartage of Ballast, Kankar, Coal, Grit or Sand etc, including loading and unloadrng but excluding stackings on pucca roads

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) .

RCC work Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shutterang, finishing and excluding reinforcement - Above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Centering and shuttering with 12mm thick shuttering plywood conforming to IS 4990:2011 and removal of form at all heights. Plywood will be supported on lock bars. Suspended floors, roofs, landings, balconies and access platform.

Providing, & applying Priming Coat with bitumen emulsion(5581) on prepared surface of grangular base Including cleaning of road surface and spreading primer @ 0.70 kg/sqm. using mechanical means. Rates including of biturnen emulsion. (As per MORTH 502, MORT&H 2024 Rates taken from intergrated SOR dated on 1-11-2024

Providing, & applying Tack coat with bitumen emulsion SS1 using emulsion pressure distributor @ 0.25 kg/sqm on the prepared grangular/ old painted surface, cleaned with mechanical broom Including all Taxes material, labour, T& P etc. required for proper completion of work. Rates including of (As per MORTH 503 MORT&H 2024 Rates taken from intergrated SOR dated on 1-11-2024)

Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP, using crushed stone aggregates of specified grading, premixed with Bituminous binder(VG-30) @4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density as per MORTH specification clause No. 505 (MORT&H 2024 Rates taken from intergrated SOR dated on 1-11-2024