Provn of Earthing arrester, 40 X Electric geysers exhaust fan wall mounted fan submain wiring and Spl repair/replacement to old unsv internal wiring, MCB DB and old tube light with LED light at RMS Dholpur

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified.

M&L point wiring concealed type complete including cutting chases for conduit pipes on stone masonry wall with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in pvc conduit pipes with all pvc accessories such as Tee, bend, collar, elbow, square junction box etc fixed inside the wall/ceiling by means of pvc conduit pipes and suitable accessories including suitable size of PVC boards/existing sunken box with modular boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete rate including cutting chases and finishing the wall after concealing the pipe with suitable plastering/putty/distembering etc all as specified and directed for the following :-

One light point/Fan point controlled by one way switch.

One 3 pin or 5 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin or 5 pin 6 Amp socket point outlet on the independent board

All as per item No 2.00 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.

S&F modular switch 1 way , 6 Amp, 1 module, as per existing model and type complete all as specified.

S&F modular switch 1 way , 16Amp, 1 module, as per existing model and type complete all as specified.

S&F modular socket on existing plate, 6Amp, 2/3 pin combined, 2 module as per existing type and model. complete all as specified.

S&F modular socket on existing plate, 6Amp/16Amp combination, 2/3 pin combined, 2 module as per existing type and model. complete all as specified.

S&F modular fan regulator 2 module SP, 240Volt

S&F modular white cover plate with frame of 3 module as per existing model and type complete all as specified

S&F modular white cover plate with frame of 4 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 6 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 8 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 12 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 18 module as per existing model and type complete all as specified.

S&F modular flush metal box 3 module complete all as specified.

S&F modular flush metal box 4 module complete all as specified.

S&F modular flush metal box 6 module complete all as specified.

S&F modular flush metal box 8 module complete all as specified.

S&F modular flush metal box 12 module complete all as specified.

S&F modular flush metal box 18 module complete all as specified.

Taking down old U/S sub main wiring of any size & make complete all as specified.

M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories concealed in wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified.

M&L submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories concealed in wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified.

M&L submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor four runs and two run of 6 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories concealed in wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified.

M&L submain wiring complete with 10 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor four runs and two run of 10 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified.

Taking down old U/S rusted main switch/DB of any size capacity and make includingh MCB/MCCBs.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs :-

4 way TPN with busbar 415 volts (double door type).

12 way SPN with200 Amp rated busbar 240 volts (double door type).

8 way SPN with200 Amp rated busbar 240 volts (double door type).

4 Way SPN with 200Amp rated busbar 240V (Double door type)

S&F MCB 240 volts 10 KA, rupturing capacity fixed in DB's of the undermentioned type and rating.

MCB SP 240 volts 10-40 Amps

MCB SPN 240 volts, 40 Amps

MCB TP 415 volts, 63 Amps 16 KA

MCB 4P 415 volts, 63 Amps 16 KA

S & F in repair LED batten 20watt suitable for 1200mm long with G-13 lamp holder T5 and T8 , housing finished in alluminium powder coating complete with all accessaries complete all as specified.

M&L batten/angle holder in repair insulated with back plate including suitable size of PVC round block complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED bulb 07W cool day light , in-built voltage surge protection > 3.5kV, single ph, 230V, luminous efficacy 100Lm/Watt, base B22, min 3 star rated complete all as specified.

S & F in repair LED light fitting mirror type with high output diffurser 2 feet, 7w/10w 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable suitable size complete all as specified.

Supply, fixing and testing in repair LED flood light 100watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp and having lumen output not less then 100 lm/w new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium with 10KV surge protection complete all as specified.

Material and labour for renewal of Chemical Earthing complete with copper earth plate electrode of size 600x600x3mm thick buried directly in ground (earth pit should not less than 4 mtr deep below normal ground level ) with top edge of the plate not less than 2.95 mtr deep below normal ground connected to and included copper earth strip 20mmx 3mm by means of copper bolts nuts check nuts and washer returning and filling the pits with excaviated vsoil mixing with charcoal 250 kg crystal salt 200 kg magnisiun sulphate of 100 kg and vegitable soil all around the plate up to 350 mm above from top edge of plate and balence portion filling with excaviated soil in layers not exc 25 mm thick 25 mm bore galvanised iron medium grade watering pipe up to top of plate 50mm bore galvanised iron light grade pipe for earth strip protection including all excavation earth work in any type of soil pcc 1;3;6 type c1 ....for chamber of internal size 300mmx 300mmx300mm with 120mm thick wall and 700mmx700mmx150mm thick bed concreat RCC 1:2:4 ,type b1 for precast chamber cover 50mm thick reinforced with welded steel wire fabric orxPM jali (weight not less than 4.00 kg/sqmm) ,funnel,with wire mesh complete all as specied and directed. Note (i) Quoted rate shall be deemed to include for earth strip with protection pipe up to 7.5 M length

S&F in repair LED luminaire 600mmx600mm, 35/36 watt, 240V AC recessed type with high efficiancy PMMA diffuser soft glare free light complete with driver ,holder, LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper condutor cases of suitable size complete all as specified.

S&F in repair sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 volts. complete all as specified.

Supply and fix in replacement ceiling rose surface type, 2-3 terminal 65x50mm, complete all as specified and directed

Supply and fix in repair decorative frosted glass wall lights / wall lamps with arrangements of mounting LED bulb i.e. having B22 base indoor type chrome finish base with arrangements of wall mount/ flush mount including required screws all as specified and directed by Engineer in Charge. complete all as specified.

Supply and fix in repair on load change over switch 415 v in sheet metel enclouser 4 pole of capacity 160 amp complete all as specified.

supply and fix in replacement old bldg Security light with ^lithium based Energy Efficient Integrated solar street light of 32 watt ^ in single FRP body with duly polyurethane coating,encases with monocrystalline solar PV panel of 65-67 Wp ,lithium battery 11.1/12.8 v 33/36 AH with inbuilt BMS IP 65 high brightness W-LED (160/180 lm /watt) lamp with aluminium reflector for better light distrubtion CRI>70 colour temperature 5700-6500K . microcontroller basedcharge controller cum driver automatic diming function with PIR motion sensor dusk to dawn operation sutiable to working temperature -10 to 55 C .weight not more than 14-16 kg with adjustiable MS clamp sutiable for pole wall mounting etc complete as required

Supply and fixed single pointed air termination aluminium rod 12mm dia and 300mm long complete all as specified.

Supply and fix Aluminium conductor (weasel) steel reinforced for connecting the air termination network complete all as specified.

Precast cement concrete block type B1 (1:2:4) 20 mm graded aggregate masony with solid blocks in width and setting in mortar, complete (PCC cube size 800mmX400mmX400mm to be fixed under the air termination aluminium rod) complete all as specified.

Supply and fixed aluminium strip size 25mmX3mm complete with saddle and fixing screws for fitting the strip complete all as specified.

Supply and fix GI pipe medium grade ISI marked including fittings and laid in trenches/under roads/drains/fixed to poles/walls with required size of flat iron clamps bolts nuts and washers complete all as specified of size 50mm complete all as specified.

Supply and fix flat angle iron with hooks and nuts bolts, cross arms, bracing supports clamps and back plates fabricated from strctural steel sections including nuts,bolts,washers,welding,bending hot or cold drilling holes for bolts in any shape or size as indicated or complete all as specified.

Supply and install GI strip 32x6 mm buried in ground or fixed on wall complete all as specified.

Supply and fix GI pipe medium grade ISI marked including fittings and laid in trenches/under roads/drains/fixed to poles/walls with required size of flat iron clamps bolts nuts and washers complete all as specified of size 40mm

M&L for test point termination block made of gun metal phophorus bronze size 75x75x25mm grilled and screwed including 03 Nos 8mm dia 25mm long hex head screw included with suitable size of MS sheet enclosures with necessary fixing arrangements complete all as specified.

Material and Labour for borewell earthing with the help of mechanical boring machine of 150mm dia 30mtr depth, supply and fix 150mm bore UPVC pipe 6kg/sqm rating 6mtr long with the help of suitable size clamp with nut bolt and washers -01 No including charcoal dust, salt fill in bore well for achieve earth continutiy less then 1 ohm. M&L for covering of borewell mouth with PCC(1:2:4) type B1/Brick masonry pit of size 45x45x45cm complete and give the minium earth test result below 1 ohm complete all as specified and direected by engineer in charg. Note-(i) The earth pit shall be refilled with boulders free from vegetable soil.(ii) Earthing shall be tested by contractor in Presence of Engr-in-Charge. Record shall be maintained. payment shall be admissible only after satisfactory test results.(iii) GI pipe electrode and GI strip shall be measured and paid separately.

M&L for stay assembly complete with accessories including rod dia 16mm of length 1.8 meter with stay strand of 7/2.24 mm size and size of stay plate as 230x230x6mm with overall dimension 65x90mm clearance of hole 16mm including excavation and PCC in 1:3:6 type C2 to adequate depth complete all as specified.

M&L for point wiring complete with 1.5sqmm 02x single core multistranded copper conductor of 1100volts grade PVC pre insulated FRLS and unsheathed cable enclosed in and including PVC casing and caping double locked box type with all PVC accessories such as Tees,bend,collar,elbow,square junction box etc fixed on the surface of the wall/ceiling by means of PVC sleeve/dash fastners with cadmium plated screws including suitable size of PVC boards for mounting fittings like switches,sockets,fan regulator etc including 1.5sqmm insulated but unsheathed copper earth continuity conductor to common earth and connected to earth dolly for one light/fan point controlled by one way switch complete all as specified.

Supply and fix Switch Piano flush type single pole one way 5Amp complete all as specified.

S&F metal body exhaust fan 300mm sweep dia, turbo force SP, 1400 RPM, single phase, 230V with complete accessories and making provision of wire mesh for the protection of interior area from insects/monkeys or any ruptiles complete all as specified.

Supply and fix PVC body wall mounted fan 400mm with copper winding motor, 230V AC with blades and fan including all type of fixing material such as screws /bolts / nuts and having different speed controller mounted inside body complete all as specified.

Supply and fix ceiling Rose 3 terminal of PVC/polycarbonate, isolated body complete all as specified.

Cutting/pinning/demolition of any type of wall 300mm dia or the required size of exhaust fan, make good the wall after fixing the exhaust fan as per position including plastering, applying putty and wall painting/distembering etc complete all as specified.

Supply and fix electric water heater storage type steel body with steel inner tank and heating element upto 2kW capacity 25 litre BEE 5star with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified.

Supply and fix PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified.

M&L submain wiring complete with 2.5 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 2.5 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories dixed on surface in wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified

Supply and fix GI pipe 15mm medium grade ISI marked on wall complete all as specified.

Supply and fix Cock, Bib , brass chromium plated screwed down for size 15mm dia pipe complete all as specified.

Supply and fix Cock, stop brass chromium plated screwd down for 15mm dia pipe complete all as specified.

Cutting Job and tapping from existing water pipeline for branch connection including necessary fittings etc complete all as specified.

DEMROT ELECTRICAL WORKS (BID ID -3160453)

M/S BAJRANG CONSTRUCTIONS (BID ID -3161874)

GOVIND CONSTRUCTION (BID ID -3162678)

Vijay Electricals (BID ID -3162729)

Rajesh Mishra (BID ID -3167977)

M/s S. K. Construction Co. (BID ID -3162818)

Allied Builders (BID ID -3163996)