Karnataka

Active

Works

Water supply/sewage lines

PROVIDING FHTCS TO 488 HOUSEHOLDS IN K CHANDRAGI HABITATION OF K CHANDRAGI VILLAGE, RAMDURG TALUKA IN BELAGAVI DISTRICT THROUGH MVS & PWS TO SALAHALLI VILLAGE & 19 OTHER VILLAGES IN BELAGAVI DISTRICT (Balance Work)

Rural Drinking Water and Sanitation Department

RWSSD Division Office Belagavi | Belgavi, Karnataka

Amount: ₹1.8 CrCloses: 23 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published15 Oct 2026
Pre-Bid Meeting19 Oct 2026
Closes23 Oct 2026
Bid Opening26 Oct 2026

Tender Value

₹1.8 Cr

EMD Value

₹2.8 L

Closing Date

23 Oct 2026, 5:00 pm5d left

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Mobile Number

Work Description

PROVIDING FHTCS TO 488 HOUSEHOLDS IN K CHANDRAGI HABITATION OF K CHANDRAGI VILLAGE, RAMDURG TALUKA IN BELAGAVI DISTRICT THROUGH MVS & PWS TO SALAHALLI VILLAGE & 19 OTHER VILLAGES IN BELAGAVI DISTRICT (Balance Work)

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT10669

Reference Number

RWSSD/2026-27/WS/WORK_INDENT10669

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Two Tender Document System(Two Cover)

Location

RWSSD Division Office Belagavi

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredAnnual Turnover Certificate least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs.367.50 Lakhs with UDIN

RequiredCompany Registration Certificate

RequiredPWD Department The Tenderer should possess valid registration Certificate as mentioned in KW docu

RequiredPAN CARD COPY

RequiredGST REGISTRATION COPY

Requiredsimilar nature Work Done certificate value not less than 91.86 Lakhs certified by an officer not below the rank of Executive Engineer

RequiredUnconditional line of credit Of Rs.55.13 Lakhs from Banker of a nationalized Bank Scheduled Bank liquid assets as mentioned in KW docu

RequiredQuantity wise workdone certified by an officer not below the rank of Executive Engineer

Requiredtender capacity Tenderer must have assessed available tender capacity as per formula in KW documents

Requiredongoing work The Tenderer must submit ongoing work commitments to compute available tender capacity

RequiredAccurate Postal address and Phone /Mobile Number

RequiredThe Contract of party shall visit the Balance work site along with the AEE Ramdurga and Submit the Joint Inspection report

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contactvalue (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Corrigendums modifications correction if any will be published in the website only

Tenderer or his identified Sub Contractor should possess valid Electrical License forexecuting building electrificatio works and should have executed similar electrical workstotallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same..

Corrigendums modifications correction if any will be published in the website only.

All the scanned documents pertaining to bidder to be uploaded shall be in original andsame originals should be produced to the Executive Engineer (at the time of Technical BidOpening) who reserves right to verify the orginal documents before approval

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

All the materials to be utilized for the work must be tested in authorised labs and quality control test reports must be enclosed to the bills. All types of pipes and pumpingProject DetailsGeneral Conditions of Eligibilitymachineries with Accessories and other materials must be tested by third party agencys.Cost of all QU tests must born by contractor

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

The rates of items are inclusive of cost of materials, labour charges, HOM of machinery, all lead and lifts and all other charges to complete the work successfully as per specificationsand as directed by engineer in charge of work

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer, RDW&S, Belgaum is final. and Binding

Bidder should Submit only unconditional Line of Credit in the prescribed format only from the Bank

Third party consults may be engaged for checking quality and quantity of work and toprevent any misuse. proper reporting methods trough these agencies and their comments to be reviewed addressed immediately at district level. quality of work is of most importance.

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund. & Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders

Materials like pipe, CI pipe, cement aggregate sand etc., required for the work shall be procured by the tenderer themselves and shall be of standered quality as per IS specifications and should get tested by the quality control authority before used to the work at his own cost.

The work should be carried out in accordance with the standard specifications specified by the department.

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Tenderers must have valid PWD registration and must submit PWD registration copy Class III & above

Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.367.50 Lakhs(The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number (also the audited financial statements for each of the financial years to be submitted). The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public.)

Satisfactorily completed(at least 90% of the contract value)as Prime Contractor,at least one similar nature work(Drinking Water Supply Work)of value not less than Rs91.86 Lakhs certified by an officer not below the rank of Executive Engineer

The Tenderer should submit the Unconditional line of credit from Banker of a nationalized Bank / Scheduled Bank / liquid assets amounting to i.e. of Rs.55.13Lakhs

The Contract of party shall visit the Balance work site along with the AEE Ramdurga and Submit the Joint Inspection Report

Technical Criteria

Past Experience

Satisfactorily completed(at least 90% of the contract value), as Prime Contractor, atleast one similar nature work(Drinking Water Supply Work) of value not less than RS.91.86Lakhs (certified by an officer not below the rank of Executive Engineer)

Work Done Certificate

Executed in any one year the following minimum quantities of work (Cement Concrete - 219.48Cum Earthwork- 3343.09 Cum, Pipeline work 6739.50Rmt, etc)certified by an officer not below the rank of Executive Engineer

Work Done Certificate

Capabilities of Vendor

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

PWD registration and must submit PWD registration copy Class III & above

PWD Registration Certificate (Class I/II/III/IV)

ongoing work The Tenderer must submit ongoing work commitments to compute available tender capacity

Others -- ongoing work

Financial Status

Liquid assets and/or availability of credit facilities of not less than Rs.55.13 Lakhs through submission of unconditional Credit line/letter of credit/ certificates from banks for meeting the fund requirement etc

Line of Credit

Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs367.50 Lakhs(The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number (also the audited financial statements for each of the financial years to be submitted). The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public)

Audited CA Certificate of Annual Turnover

Bank Details for Reference

Others -- Bank Details

PAN CARD COPY

ITR Filed Copy (Mentioning PAN)

Others

Phone / Mobile Number

Others -- Phone / Mobile Number

Postal address and Phone / Mobile Number

Others -- Postal address and Phone / Mobile Number

Accurate Postal address and Phone /Mobile Number

Others -- Accurate Postal address and Phone /Mobile Number

The Contract of party shall visit the Balance work site along with the AEE Ramdurga and Submit the Joint Inspection report

Others -- Joint inspection

tender capacity Tenderer must have assessed available tender capacity as per formula in KW documents

Others -- bid capacity

GST REGISTRATION COPY

GST Registration

Fee & Financial Details

Tender Fee Amount

₹4,600

EMD Fee Amount

₹2.8 L

Important Dates

Last Activity

15 Oct 2026

Published

15 Oct 2026

Bid Opening

26 Oct 2026

Download Ends

17 Oct 2026

Pre-Bid Meeting

19 Oct 2026

BOQ Preview

•

Pumping Machinery at Proposed Borewell-1

•

Supply & delivery to work site, submersible pump set of 150mm dia suitable for bore well and confirming to IS 8034 3phase SS Bowl & Impeller with Low volt Motor as per specifications with necessary te...

•

Supply and delivery at site Brand new best make PVC insulated cables of Flat 3 core (sheathed) of nominal cross sectional area as per IS : 694-1990 with ISI mark and as per its latest amendments (1 x...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type of size 80 mm as per IS 778/1984 with latest amendments with ISI mark. omplete with all lead, lifts, loading & unloading ...

•

Supply and delivery at site of brand new best make Gate Valve of size 80 mm as per IS 778/1984 with ISI mark and as per its latest amendments omplete with all lead, lifts, loading & unloading charges ...

•

Supply and delivery at site of brand new best make Non Return Valve as per IS 778/1984 with ISI mark 80 mm and as per its latest amendments omplete with all lead, lifts, loading & unloading charges i...

•

Supply installing testing and commissioning COMMON Control panel consisting of the following INCOMING:1 no Set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog V...

•

supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228 / 1978 and its latest amendments and with ISI Mark of 40 amps wi...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Labour charges for Erection, Electrification and Commissioning Works of Pump sets Including aligning and balancing with all necessary erection of materials and labour including supply and erection of ...

•

Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc.complet...

•

Labour charges for Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit, with all...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ompl...

•

Providing, Supplying and fixing LT cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc...

•

Earthing : Supplying and fixing and wiring earth electrode for grounding circuits IC cut-outs and other equipments on the meter board in the pit confirming to IS 3049/1968.The pits should be filled up...

•

Pumping machinery at proposed bore well -2

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ompl...

•

Pumping machinery at proposed bore well -3

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length 80mm heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty c...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ompl...

•

Pumping machinery at existing bore well

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ompl...

•

RCC hume pipe pump house near proposed borewells

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) incidental charges required for successfull completion of work etc., complete as p...

•

Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

•

Providing and laying in position Cement Concrete for all Sub structures of

•

building, Irrigation works, Sub structure works of bridges, Drain works &

•

other parallel works from 0.50m to 3.50 m height. T...

•

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...

•

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Proposed sump cum pump house 1.00 lakhs ltr capacity 6.60 m dia

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils , as per dr...

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils , as per dr...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Foundation works.

•

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

•

as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

•

4 fine sand) to brick masonry including rounding off corners wherever

•

required smooth rendering, providing and removing scaffolding, in...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

•

fine sand) on concrete surface / ceilings including rounding off corners

•

wherever required smooth rendering, providing and removing s...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...

•

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mount...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

•

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS...

•

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete including cost a...

•

Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing of T5 Fluorescent Tube with 14W power consumption with low 3mg Mercury content & below 40% glass content than TS lamp & 20% less phosphor coating than T8 with initial lumen on 135...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

•

Pumping machinery at Proposed sump

•

Supply and delivery at site of brand new best make pressure gauge bourdon type of size 100 mm as per IS 778/1984 with latest amendments with ISI mark. omplete with all lead, lifts, loading & unloading...

•

Labour charges for Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to met...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ompl...

•

Providing, Supplying and fixing LT cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts...

•

Earth work excavation for pipeline/ cables by Manual Means upto 600mm trench width, asper drawing and technical specifiations including settingout, shoring, strutting barriading caution lights, remo...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...

•

Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includin...

•

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for:

•

cutting in Macadam road surface co...

•

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour including lowering into trenches, laying true to line level and perfect linking at joints leak pro...

•

Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vac...

•

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

•

Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of l...

•

Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, Complete with GI Fittings (Excluding Cost of Specials) with Cuts and Threads where...

•

Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excl...

•

Installation of steel product pipe by HDD method including preparing and setting up the plant and equipment, preparing new pipe work materials, installing new pipe work and commissioning system or ma...

•

Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm thick including disposing of the surplus earth wi...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per

•

Clause 1501.2.2 M20 (Grade), c...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such

•

simillar works in all kinds of soils, as per dr...

•

Providing and laying in Cement Concrete for All foundation works The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plastic...

•

Repairs to Existing ELSR-1 & 2 100000 ltrs 9.0 m staging

•

Cleaning of Water Storage Tank or Sump by following method: (1) Empty theTank/ Sump and make it to near dry, (2) Apply bleaching powder uniformally (@Tank capacity x 0.5 gms/litre) inside the Tank/ Su...

•

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...

•

Construction of ELSR 25000 ltr, 9.0 m stg.

•

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

•

Providing CI bank flange confirming to IS 1538 (Part-1 to XXII) 1978 with latest amendments if any cost of all materials labour charges etc complete 80mm dia CI blank flange complete with all lead, li...

•

Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm dia dia CI Bell Mouthed pipe ...

•

Providing Duck foot bend confirming to IS 1538 (Part-1 to XXII) 1978 with latest amendments if any cost of all materials labour charges etc., complete 80mm dia CI Ducj foot bend complete with all lea...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

•

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and

•

flexible nylone wires, painting figures with approved enamel pai...

•

Providing and fixing copper lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, Copper strip to be embeded in one of the columns in and independent GI conduit of 4...

•

Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such

•

simillar works in all kinds of soils, as per dr...

•

Providing and laying in Cement Concrete for all foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasti...

•

Distribution Pipeline

•

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for Cutting in Macadam Road Surfacecompl...

•

Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should ...

•

Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should ...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per

•

Clause 1501.2.2 M20 (Grade), c...

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

•

Providing and laying in position Cement Concrete for all Foundation works.

•

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

•

as per relevant IS Codes machine mixed with supe...

•

Maintenance of WBM road including filling up of pot holes,

•

ruts and rectifying corrugated surface, damaged edges and

•

ravelling as per technical specification Clause 1907. with all lead, lifts, loadi...

•

Patch repair on already filled pot holes with 75 mm BM with 20 mm premix carpet and seal coat Type B as per drawings and technical specification Clause 1904.2e with all lead, lifts, loading & unloadin...

•

Restoration house tap connection

•

Cutting road surfaces for pipeline trenches and disposing of the excavated

•

stuff as directed including barricading, danger lighting etc. in the

•

classifications for: Cutting in Macadam Road Surface com...

•

Providing & fixing electro fusion saddle comply with BS EN12201 -3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting -...

•

Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing com...

•

Supplying MDPE pipe grade PE80 6kg/cm2, 5.3mm thick complete as per specifications. MDPE pipe 20mm dia complete with all lead, lifts, loading & unloading charges including cost and conveyance of all ...

•

Providing and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...

•

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long, weighing not less than 88g. complete as per specifications with all lead, lifts, loading & unloading...

•

Providing Laying and fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary including ...

•

Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any For 15 mm dia GI Union complete with all lead, lifts, loading & unlo...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: 15mm dia GI elbow complete with all lead, lifts, loading & unlo...

•

Providing and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200...

•

Providing and fixing brass bib cock of approved quality : inculding cost of all materials, labour and HOM with all leads complete as per specifications 15mm Brass bib cock complete with all lead, lif...

•

Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved Sand including hand packing, ramming, watering including cost of all materials and labour with al...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade)...

•

Providing and laying in position Cement Concrete for all Foundation works.

•

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

•

as per relevant IS Codes machine mixed with supe...

•

Functional house tap connection

•

Cutting road surfaces for pipeline trenches and disposing of the excavated

•

stuff as directed including barricading, danger lighting etc. in the

•

classifications for: Cutting in Macadam Road Surface co...

•

Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing com...

•

Providing and laying in position Cement Concrete for all Foundation works.

•

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

•

as per relevant IS Codes machine mixed with supe...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

K Chandargi KW-4 10669 - R1.docx

Tender Document • 0.51 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Water supply/sewage lines

PROVIDING FHTCS TO 488 HOUSEHOLDS IN K CHANDRAGI HABITATION OF K CHANDRAGI VILLAGE, RAMDURG TALUKA IN BELAGAVI DISTRICT THROUGH MVS & PWS TO SALAHALLI VILLAGE & 19 OTHER VILLAGES IN BELAGAVI DISTRICT (Balance Work)

Rural Drinking Water and Sanitation Department

RWSSD Division Office Belagavi | Belgavi, Karnataka

Amount: ₹1.8 CrCloses: 23 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published15 Oct 2026
Pre-Bid Meeting19 Oct 2026
Closes23 Oct 2026
Bid Opening26 Oct 2026