Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 CrAccepted-AOC | ₹6.3 Cr | L1 | Accepted-AOC l1 |
| 2 | L2₹6.5 Cr+₹24.2 L (3.85%)Rejected-Finance | ₹6.5 Cr+₹24.2 L (3.85%) | L2 | Rejected-Finance L2 |
| 3 | L3₹6.6 Cr+₹30.5 L (4.85%)Rejected-Finance 385 65 GAOSHALA MUZAFFARNAGAR | ₹6.6 Cr+₹30.5 L (4.85%) | L3 | Rejected-Finance L3 |
| 4 | L4₹6.8 Cr+₹48.6 L (7.72%)Rejected-Finance | ₹6.8 Cr+₹48.6 L (7.72%) | L4 | Rejected-Finance L4 |
Tender Value
₹7.5 Cr
EMD Value
₹15 L
Closing Date
29 Feb 2024, 4:30 pmClosed
se pwd saharanpur
se pwd saharanpur
Work of widening and strengthening of Deoband-Kuteshra (other district road) road.
2024_CEMRT_904688_1
705/96MS-S/2023 Date 30-01-2024
Open Tender
Civil Works
Item Rate
365 days
saharanpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
₹15 L
1 May 2024
24 Feb 2024
29 Feb 2024
24 Feb 2024
29 Feb 2024
24 Feb 2024
Amount
Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. Ref. to MoRTH Spec. 301 complete in all respects but excluding GST.
Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet).. SI. No. 692 but excluding GST
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref. to MoRTH Spec. 305 complete in all respects but excluding GST.
Mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etccomplete in all respects but excluding GST.(SI No 260)
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per MORTH clause 401. complete in all respects but excluding GST.
Providing laying spereading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per MORTH clause 406 complete in all respects but excluding GST.
Providing & applying Primer coat with bitumen emulsion (S/S Type) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60kg/Sqm. Using mecha- nical means.complete in all respects as per MORTH clause 502 but excluding GST.
Providing and laying Dense Graded Bituminous Mecadam with 100-120 TPH hot mix plant producing an avearge output of 75 tonne per hour using crushed aggregates of specified grading premixed with bitminous binder @ 4.5% by waight of total mix and filler, transported to site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as as per MORT&H specifications clauses 505(B) complete in all respects but excluding GST
Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. as per MORT&H specifications clauses 503 complete in all respects but excluding GST
Providing and laying bituminous cocnrete with 100-120 TPH batch type HMP producing and average output of 75 Tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver fixisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specificiation clause No. 507(B) complete in all respects but excluding GST
Cement Concrete with 4 cm. guage approved stone ballast, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work complete excluding GST. (SI. No. 281)
Plain/Reinforced Cement Concrete (M-25) in sub structure complete as per Drawing and Technical Specifications. Ref. to MoRTH Spec.1500, 1700 & 2100 complete in all respects but excluding GST.
R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra complete in all respects but excluding GST (SI. No. 283)
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. And make as approved by Eng-in-charge. As per MORT&H specifications clauses 1600 complete in all respects but excluding GST
M-150 Brick work in in 1:4 (One cement & four fine sand) mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work complete in all respects but excluding GST. (SI. No. 305 (a))
Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus complete in all respects but excluding GST. (SI. No. 574)
12 mm thick plaster with cement and fine sand of 1.25 fineness modulus in 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials, labour, tools & plants etc required for proper completion of the work complete in all respects but excluding GST. (SI. No.584)
Supply & fixing of NP-3 class 350 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST
Supply & fixing of NP-3 class 450 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST
Supply & fixing of NP-3 class 600 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST
Supply & fixing of NP-3 class 900 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST
Supply & fixing of NP-3 class 1000 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST
Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) (new item 15)
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification as per drawing, Technical and MoRTH specification clause No. 2503 but excluding GST
Providing and laying Filter material Graded stone aggregate of required size underneath pitching in slopes complete as per drawing, Technical and MoRTH specification clause No. 2504 but excluding GST
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing, Technical and MoRTH specification clause No. 2504 but excluding GST
(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand.complete in all respects but excluding GST S.I. No.255
M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. complete in all respects but excluding GST S.I. No. 763
M/S SHIV SHAKTI INFRA BUILDWELL PRIVATE LIMITED
M/S DS CONSTRUCTION
RAJ BUILDERS
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .