PROVN OF BDY WALL AROUND MES POOL ACCN AT RA LINE AND OLD MH PROVN OF DRAINAGE SYSTEM AT DSC LINE AND PROVN OF TOILET COMPLEX AT VARIOUS LOCATIONS INSIDE COD UNDER GE I KANPUR

Amount

BnR Schedule

Surface exacavation n. exc 30 cm deep and averaging 15 cm deep and getting out in Soft /loose soil including cutting to required all as specified and directed.

Excavating in trenches, n. exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits manholes pier holes, under ground cable/pole fondation/ water supply pipe line and getting out in soft/loose soil including forming bottom surface to required level or slope complete all as specified and directed by Engineer-in- Charge.

Returning filling in with approved excavated soil including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified.

Removal of excavated material (soil) n. exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Removal of excavated material (soil) exc 250m but n.exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in fdn/mass concrete complete all as directed by Engineer –in-charge

M&L for PCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in surface channel and drain all as specified and directed.

M&L EXTRA for forming fair finished channel 30 cm inner girth in cement concrete using extra cement including moulds mitred stopped ends etc complete all as specified and directed.

M&L for brick work with flyash bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and directed by Engineer-in-Charge..

M&L for brick work with sub class 'B' brick using old size bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and directed by Engineer-in-Charge..

M&L for brick work with sub class 'B' brick using old size bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed by Engineer-in-Charge..

M&L for 15 mm thick rendering in cement mortar 1:6 on concrete or brick work surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick work surface finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of concrete or brick work surface finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of concrete or brick work surface finished even and smooth w/o using extra cement with using WPC @3% by weight of cement complete all as speciified and directed. Note: WPC shall be measured and paid separately.

Supply only water proofing compound (ISI marked)

M&L for rendering 10 mm thick on fair faces concrete surfaces of ceiling in cement mortar 1:4, finished even and smooth without using extra cement.

M&L for plain cement concrete 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in copings, including necessary formwork all as specified and directed.

M&L Reinforced concrete pipes, 450mm dia bore class NP3, laid and jointed in CM 1:2 complete with collars all specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L 150 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in path/ hardstanding/location of culvert finished the surfaces even & smooth without using extra cement complete all as specified and directed

M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 150 mm thick, watered and rammed to a true surface complete all as specified and directed..

M & L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates or in sub base of floor all as specified.

M&L 50 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in path/plinth protection finished the surfaces even & smooth without using extra cement complete all as specified and directed

M&L solid pvc frame ( single rebated) of size 50 mmx 47 mm made out of 5 mm plain colour PVC Sheet with homogenous fine cellular structure having smooth outer integral skin with suitable metal stifner and fixed with 100x8 sheet metal CSK (copper screws) screws complete all specified and as shown drawing.

M& L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F of 100 mm size PVC butt hinges of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC handle of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC tower bolt of Make: Prayag or equivalent complete all as specified and directed.

S&F 15mm bore steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete and all as specified and directed. Make : TATA/Jindal/ Prakash Surya as approved by GE.

S&F 20mm bore steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete and all as specified and directed. Make : TATA/Jindal/ Prakash Surya as approved by GE.

. S&F in 15 mm bore dia Stop/ Gate valves cast copper alloy, screwed down , high pressure, with crutch or butterfly handle , screwed both ends for pipe or for unions and fixed.

. S&F in 20 mm bore dia Stop/ Gate valves cast copper alloy, screwed down , high pressure, with crutch or butterfly handle , screwed both ends for pipe or for unions and fixed.

Supply and fixing 15 mm dia bib tap fancy type Chromium plated cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe complete all as specified and directed. Make : Hindware / L&K / Plumber / Jaquar/Prayag as approved by GE.

S&F 15 mm bore angle cock, cast copper alloy chromium plated, screwed down, high pressure, with capstan screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make : L&K / Plumber / Jaquar/ Prayag/Marc as approved by GE.

S&F Pillar tap fancy type pressure with or without letter cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'HOT or cold with long screwed shanks and fly nuts screwed shanks and fly nuts screwed for irion pipe and fixed complete all as specified and as directed. Make : L&K / Plumber / Jaquar/Prayag/Marc as approved by GE.

S&F in for vitreous chinaware wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets fixed in repairs complete all as specified and directed. Make : Hindware/ Cera/ Parryware as approved by GE.

S&F 15mm bore PVC connection 450mm long heavy duty with brass fly nut and warsher complete and all as specified and directed

S&F Vitreous chinaware squatting pan of Orrissa pattern size 580x440mm white with integral foot rest including P trap or S trap front ot back, PCC bedding 1:5:10 type E-2 using 40 mm graded brick aggregate complete all as directed. Make : Hindware/ Cera/ Parryware as approved by GE.

S&F Vitreous chinaware EWC water closet pan (Padestal pattern) white with and including white seat & cover with flat bottom with CP hingeing device complete all as directed. Make : Hindware/ Cera/ Parryware as approved by GE.

Supplied and fixed PTMT PVC grating with/without hole 150 mm dia complete all as specified and directed.

S&F tubular towel rail 20mm dia D type 60cm long between flanges brass CP complete all as specified.Make : Hindware/L&K/Plumber/Jaguar/ Prayag

Supply and fixing 10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32 mm dia polythene high density flush pipe and connected to squat pattern.Make : Hindware/ Cera/ Parryware/ Prayag as approved by GE.

M&L water proofing treatment to roof slab with APP modified polymeric membrane centre core 100 micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3.60 Kg/sqm with 100mm overlap laid as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge with following courses of descriptions below :-

(a) Preparation of plastered roof surface by cleaning surface free from dust and other foreign materials etc

(b) Applying a priming coat @ 0.40 Kg/ Sqm with bituminous primer to the prepared roof till the surface is properly impregnated and solvent oil in primer shall be allowed to evaporate completely.

(c) Applying hot blown bitumen grade 85/25 @ 1.2 Kg/ Sqm over primer complete all as specified and as directed.

(d) Laying of polymeric water proofing membrane of min thickness 3 mm and weight not less than 3.60 Kg/sqm

(e) Fourth coat bonding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm.

(e) Applying a thin layer of aluminium paint 100ml/Sqm over treated surface.

Material & labour for 10 mm thick plastering in cement mortar (1:4) with using WPC @ 3% of cement incl finishing the surfaces even and smooth without using extra cement all as specified and as directed. Note: WPC shall be measured and paid separately as supply only.

M&L for 25 mm thick PCC Type B0 1:2:4 (12.5 mm graded aggregate) as in leveling course /sub base of flooring .

M&L for 7 to 8 mm thick non skid ceramic coloured printed tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and inclu 15 mm thick screed bed in CM ( 1:4 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

All as per item No 50 above but in skirting and 10 mm thick in rendering in CM (1:4 )

M&L for glazed ceramic coloured printed tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles and including 10 mm thick in rendering in CM (1:4 )complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size and 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make: Sintex/Dhara/JS Polyplast

S&F Vitreous chinaware urinals half stall type white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement flush pipe, grating and union for discharge pipe and including 32mm dia waste coupling brass chromium plated, 32 mm dia PVC waste pipe 80cm long complete all as directed. Make : Hindware/ Cera/ Parryware as approved by GE.

S&F 110mm bore PVC (SWR) pipe double socketed in any length with rubbepr ring joints fixed under floor complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe double socketed in any length with rubbepr ring joints fixed under floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubbepr ring joints as in vent pipe fixed to walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubbepr ring joints as in vent pipe fixed to walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished.

S&F PVC (SWR) bends 110 mm bore complete all as specified.

S&F PVC (SWR) bends 75 mm bore complete all as specified.

S&F PVC (SWR) branch piece, double(double 'Y') equal or unequal 110 mm bore complete all as specified.

S&F PVC (SWR) branch piece, double(double 'Y') equal or unequal 75 mm bore complete all as specified.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified.

S&F 150mm bore salt glazed stone ware drain pipe grade “A” laid in trenches and jointed in CM 1:1 complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate for concrete bed to drain pipe incl packing under and haunching against the sides after they are laid and tested for 150mm bore SGSW pipe complete all as specified and as directed.

Construction of brick soakage wells of size 2.40 m X 4.5 m deep (Effective) as per TD 576 sht 1/2 exc. complete all as specified and as directed by Engineer in charge.

M&L Precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in drain cover (square /round in shape /rectangular) with plain faces including necessary formwork complete all as specified & directed

M&L Precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover with finished even and smooth using extra cement including necessary formwork and set in CM 1:6 complete all as specified & directed

M&L for plain cement concrete 1:3:6, type C-1 using 20 mm graded stone aggregate as in copings, lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses etc including necessary formwork all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed..

M & L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed..

S&F mild steel TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including, rings cranking, stirrups, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed..

M & L use and waste of Formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams sides and soffits (if any ) of foundation and plinth beams and similar work vertical or to batter rough finished surface all as specified and directed..

M & L use and waste of Formwork to sides of roof, pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete square, rectangular, polygaonal or flat surfaces of roof complete all as specified and directed.

M & L use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of conrete flat complete all as specified and directed.

M & L use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs and lintels, chajja landing and similar work exc 200mm thick complete all as specified and directed..

M & L use and waste of Formwork to edges of concrete flats,treads,breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M&L for Reinforced cement concrete M- 25 (design mix) (20 mm graded stone aggregates) as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete all as specified and directed .

M & L for Reinforced cement concrete M- 25 (design mix) (20 mm graded stone aggregate) as in columns, pillars, piers etc as all specified and directed.

M & L for Reinforced cement concrete M- 25 (design mix) (20 mm graded stone aggregate) as in beams, cantilevers, lintel etc as all specified and directed.

M & L for Reinforced cement concrete M- 25 (design mix) (20 mm graded stone aggregate) as in slab supported on walls or as in shelves, chajja etc as all specified and directed.

M&L two coat of cement base paint over a coat of cement primer on newly plastered surface on wall including preparation of surface complete all as specified and directed.

S&F MS work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc ) inclu. all necessary drilling , bolting or riveting etc and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified.

S&F factory made steel tubular window with side hung shutters including box type hindes with steeel handleand steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified as per HQCELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 and as directed by Engineer in Charge.

M&L factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 specified and directed.

S&F mild steel framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.complete all as specified and directed.

S&F 3.00mm thick figured glass pin head type ordinary quality and glazing with oil putty in square n'exc 0.5 sqm in each pane all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

Supplied and fixed 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches/under floor complete all as specified

Dismantling of fencing wire mesh any type complete all as specified.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good the disturbed surface complete all as specified and directed.

EnM Schedule

M&L for point wiring for One light/fan/bell/exhaust fan point controlled by one switch.with PVC (FRLS) insulated and unsheathed cable 1.5 Sqmm (Nominal area) multi-stranded copper conductor single core with proper colour coding including PVC conduit medium grade of 25 mm dia concealed in walls and surface on ceiling with and including pressed steel concealed terminal boxes of appropriate size and top cover 2.5-3.0 mm thick of plastic laminated sheet ISI marked of desired colour of make : Super Hylam, painting terminal boxes inside and outside with a coat red oxidé primer complete with all accessories with and including 1.5 Sqmm PVC insulated and unsheathed green colour multi-stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed for the following points:-Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and, surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor. Make of cable : Finolex/ Polycab/ Havells/ Gloster, Make of conduit : AKG/D-PLAST/FINOLEX/PLAZA as approved by GE.

S&F of switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F of Lamp holder insulated body with back plate 240 Volts complete all as specified and directed.

S&F of ceiling rose surface bakelite of three terminals 240 Volts complete all as specified and directed.Make of item No 97 to 99 : Anchor / CONA (WAWA) / Havells / Legrand.

S&F LED light fittings 20 watt wall mounted extruded aluminium heat sink provided for efficient heat dissipation & intigrated electronic driver complete all as directed. Make Philips cat part no BN 108C-LED-20S-PSU-CDL-WH / HAVELLS cat part no NEOBS20WLED865SPCWH/ Wipro cat part no LL20-221-XXX-65AL1. Note Contractor will submit guarantee/warranty certificate from manufacturer.

S & F of sheet metal enclosure factory fabricated for MCB distribution board Single pole and neutral 240 Volts, 4 way with neutral and earth bus bar having IP-42 protection and double metal door concealed / flush to wall surface including making connections with thimbles as required complete all as specified and directed. Make : Legrand / L&T / Schneider/Indo Asian.

S&F MCB Single pole and Neutral, 30 to 63 Amps, 10 KA, 240 Volts complete all as specjfied and directed. Make : Legrand / L&T / Schneider /Indo Asian..

S&F of MCB single pole, 6 to 32 Amps, 240 Volts, 10 KA complete all as specified and directed. Make : Legrand / L&T / Schneider /Indo Asian..

Supply and install of Exhaust fan 230 V, AC single phase of size 300 mm sweep, 900 rpm, metal body complete with fixing arrangement, electric connection grouting of nuts, bolts, in wall, electric connection and writting MES No in black synthetic enamel paint / engraving tool etc all as specified and directed. Make : Turboforce of Havells / Crompton / Usha / Almonard / Orient as approved by GE.

M & L for making hole in wall/window frame for fixing fresh air for 300 mm and making good the disturbed portion match with the existing surface

S&F metal body louver shutter suitable to fit in exhaust fan of size 300mm sweep complete all as speciifed and directed by Engineer in Charge

M&L for earthing with galvanised steel earth plate electrode 600x600x6mm thick buried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate of SSR (Part-l) including necessary excavation, earth work, GI pipe 15 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade watering pipe etc. including concrete chamber of PCC 1:2:4 type B-2 (using 40mm graded stone aggregate), copping in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate), internal surface of concrete chamber shall be plastered with 12 mm thick cement mortar 1:4 and 50 mm thick RCC cover in pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia1or bar @ 80 mm c/c both ways and charcoal dust, common salt etc. including testing after completion complete all as specified and directed.

Supply & Laying, jointing and leakage testing GI tubing medium grade 25 mm bore with all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches/floor/walls and making good the disturbed surface to match with existing surface as (PCC work in 1:2:4 using 20 mm graded stone aggregate/ plastering in CM 1:4 and applying finishing coat of existing treatment) complete all as specified and as directed at site . Make: Tata/Jindal/Prakash Surya as approved by GE.

S&F 25mm dia bore gun metal Gate valve with iron wheel head conforming to IS : 778/ 1984, Class-1, Screwed both end as per IS: 554 Parallel, ISI marked including taking out the worn out/ old gate valve any type complete all as specified and directed :- Make: Apar/Upadhyay/kirloskar as approved by GE.

Cutting existing steel tubing for alterations or addition screwing existing steel tubing any size for making connections all as specified and directed.

Supply and laying in trenches / fixed on walls / passing through pipes & floors commissioning of 1100 volts grade heavy duty cable with XLPE insulated aluminium multi stranded conductor served with inner sheathing of PVC tape armored with galvanized steel wire or strip and overall PVC sheathed 6 Sqmm nominal cross section 2 core including making good all disturbed surfaces/flooring/tiling to match with existing specification complete all as specified and directed. Note: Excavation and earthwork shall be measured and paid separately.

Supply & spreading local sand obtained from ganga river in trenches for cable cushioning 8 cm under and 15 cm over the cable complete all as specified and directed. Note: Punned thickness shall be measured.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm complete all as speified and directed. Make: Mehtab tiles Indore/Hind Mosaic Tiles Upleta. Note: Purchase voucher and manufacturer test certificate shall be submitted by contractor while claiming payment.

Allied Builders And Engineers

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED