Providing and laying of 120...

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications.

Providing and laying 80mm -100 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.0% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications.

Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications.

Desilting and taking out of debris/silt rubbish etc. from RCC Box / RCC Storm water pipe line, manholes by Super Sucker Machine, desilting shall be supported by video/photograph at each location on daily basis inclusive of all material, labour, TandP temporary power connection with Generator Set of capacity at least 62 KVA and pump of 50 HP any diversion of any flow in drain, including provision of safety equipment as per guideline laid in (IS-972*1987) International standard, traffic control arrangemnets and proper lighting at night, barricading, display of sign board, insurance of workers and cleaning of site by removal from all hindrances/obstructions, unforseen items permission from other Deptt. shall be arranged with assistance of GMDA. The entire work complete in all respect to the satisfaction of Engineer -in -Charge. Size 2 x 3.0 x 2.00 Mtr

Providing stringing out, jointing, cutting, and testing of 1200mm M.S. pipe of 15mm thickness to be procured from SAIL/Jindal/TATA/Welspun/SKS Pipes only made up of M.S. plate of minimum 15mm thickness as per IS:2062, IS:3589-2001 with internal and outside lining of PU/epoxy coating in all pipes, all as per relevant specification and IS code and laying the same via trenchless jack pushing technology including jointing, cuuting, welding of the pipe, GPR survey, guide pits excavation etc. all material, labour and TandP/equipment`s as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge