SPL REPAIR TO SEWAGE LINE IN CERTAIN BLDGS OF MEADOWS LINE PROVN OF TOILET BLOCKS OF MED STORE JCOS WARD OF MH AND BARACK NO T-05 QTR GUARD UNDER GE SOUTH SECUNDERABAD

Amount

Excavation over areas, n exc 1.5 m deep and getting out as in hard/dense soil complete all as specified & directed.

Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation of manhole, for laying / repairing of LT cable / GI pipe etc and getting out as in hard/dense soil complete all as specified & directed.

Returning filling including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil complete all as specified & directed.

M&L for surface dressing n. exc 15cm deep in hard/dense soil complete all as specified and as directed.

Removing of soil to distance n.exc 50 mtr and depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed .

M&L for hard core of gauge exc 63 mm but n.exc 100 mm, deposited, spread and levelled in layers n.exc 100mm thick, watered and roolled rammed to a true surface complete all as specified and as directed.

Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed.

M&L for pre-cast reinforced cement concrete (1:1½ :3) type A-1 with using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps, septic tanks etc with plain faces set in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement complete all as specified and as directed .

Add or deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified and as directed .

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified by Engineer-in-charge.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in one brick thick honey comb walling , built in cement mortar (1:6) complete all as specified and as directed

Use and waste of formwork to faces of RCC vertical wall including finish the surface rough complete all as specified .

Use and waste of formwork to soffit of suspended slabs not exceeding 200 mm thick including finish the surface rough complete all as specified .

S&F factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.

M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed by Engineer-in-Charge.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified.

S&F 150mm size aluminium anodised handles, fabricated type complete all as specified.

Material and labour TMT bar 10mm dia and over cut to length, bent to shape as required and binding with MS wire n.less than 0.9 mm dia annealed complete all as specified and as directed .

Material and labour for fixing MS round bar as in Rungs conforming to Fe-410-W (Gde.E-250) quality-A for septic tank and manhole complete all as specified and as directed .

Material and labour TMT bar 6 - 8 mm dia and over cut to length, bent to shape as required and binding with MS wire n.less than 0.9 mm dia annealed complete all as specified and as directed .

M&L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes and painted with one coat of zinc chromate primer paint complete, tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F, steel ventilators with pressed steel frame and top hung shutter including projecting/box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 6mm thick AC corrugated sheets in roofs walls etc fixed with J- type hooks & bolts complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) as in plinth protection including finish the surface even & smooth complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in subbase of floor complete all as specified and directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

Taking down cement plaster on brick /stone wall surface including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

S & F 4 mm thick figured glass, pin headed type in squares not exceeding 0.5 Sq. M in each pane.fixed to aliminium frame work complete all specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, ove 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix 15 mm bore GI tube , medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified .

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal from site complete all as specified .

S&F of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified and as directed.

S & F 15mm bore stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type), complete all as specified and as directed.

S&F gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 20 mm ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and directed.

Supply and fix in repair 100 mm bore cast iron spun soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed .

Supply and fix in repair 150 mm bore cast iron spun soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed .

Supply and fix in repair 100 mm bore CI bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and as directed .

Supply and fix in repair 150 mm bore CI bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and as directed .

Supply and fix in repair 100 mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed .

Supply and fix in repair 150 mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed .

Supply and fix in repair 100 mm bore cast iron cowls complete all as specified and as directed .

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.

S&F PVC(SWR) bends any radius 110 mm bore without access door complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm all as specified and as directed.

S&F PVC(SWR) bends any radius 75 mm bore provided without access door complete all as specified and as directed.

S&L CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.

M&L for cement concrete bed to drain pipe 100mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed by Engr-in-Charge.

M&L for 100mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings nexc 15 cm thick (below or above ground level) complete all as specified and directed

Dismantling of cast iron or reinforced concrete drain pipes 100mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed

Excavation in trenches, exceeding 1.5 m wide and not exceeding 3 m in depth for foundation of manhole etc and getting out as in hard/dense soil complete all as specified & directed.

Taking out old brick bats of any size from filter bed , segregating serviceable brick bats & unserviceable brick bats removing the waste materials from site and cleaning surfaces of serviceable brick bats by flushing with water , keeping aside serviceable brick bats for reuse complete all as specified and directed .

Labour only loose filling with old brick bats into the filter bed complete all as specified and directed .

Material and labour for loose filling with broken brick aggregates of gauge 80 to 150 mm into filter bed complete all as specified and directed .

Material & labour for PCC 1:3:6 Type C-1 ( using 20 mm graded stone aggregate ) as in surface channel complete all as specified and as directed .

Material and labour for precast RCC ( 1: 2:4 ) Type B-1 (using 20 mm graded stone aggregate ) as in manhole cover slab and set in position with cement mortar ( 1:4 ) including demolition of existing unserviceable RCC cover slab complete all as specified and as directed .

Material and labour for RCC (1:2:4 ) Type B1 ( using 20 mm graded stone aggregate ) as in wall including demolition of existing unserviceable RCC wall complete all as specified and as directed .

Material and labour for RCC (1:2:4 ) Type B1 ( using 20 mm graded stone aggregate ) as in slab supported on wall including demolition of existing unserviceable RCC slab compplete all as specified and as directed .

M&L for 40 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) including finish the surface even & smooth using extra cement complete all as specified.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed by Engr-in-Charge.

Material and labour for non-skid ceramic coloured tiles of size 300 X 300 X 7 to 8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick works in cm 1:6 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 15mm thick in cement mortar (1:4) on brick work or concrete surfaces and surfaces finished even and fair without using extra cement complete all as specified and directed

Material and labour for rendering 15mm thick in cement mortar (1:3) on fair faces of brickwork or concrete surfaces mixed with WPC finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick wall care putty complete all as specified and directed.

M&L for prepartion of new plastered surfaces on wall applying two coats of cement based paint a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces over applying three coats of white wash on wall surfaces complete all as specified and directed.

S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.

S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.

Supply and fix in repair 15 mm bore Bib cock , cast copper alloy , chromium plated , screwed down , screwed for iron pipe all as specified and as directed .

S&F in repair bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified .

S&F PVC(SWR) junction double, (double T), equal or unequal. 110 mm bore complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed .

Material and labour for PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipe 150 mm dia including forming cradles after they are laid and tested complete all as specified & directed .

Material and labour for 150 mm dia reinforced concrete pipes , class NP3 , laid and jointed complete with collars complete all as specified and as directed .

Cutting into existing manholes for connecting new drains of dia 150 mm including making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate ) smooth finished and reforming benching as required complete all as specified and directed.

S&F in repair vitrus china orrisa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap, Flush pipe & PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge.

S&F in repairs brass choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete all as specified and directed

S & F vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, incl. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S, CP or aluminium hinging device, complete all as specified and as directed.

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed

S & F vitreous china bowl urinal, white, flat back, size of 465x355x265mm, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

S&F vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Demolition and breaking up of existing unserviceable SWG pipe set in cement mortar including concrete bed 150 mm complete all as specified and as directed .

Supply only integral water proofing liquid administure for concrete / mortar (Make: CONPLAST X421IC of Fosroc/ PLASTOCRETE PLUS OF SIKA/equivalent brand of PIDILITE)

De-sludging and cleaning of septic tank , manhole, sludge chamber etc by manual digging out and lifiting of concentrated sludge including dewatering and cleaning , removing silt , sludge , sludge water and any othert foreign materials and depositing the same into excavated pits exceeding 1.5 m depth at places ( n.exc 50 m ) as directed by the Engr-in-charge returning and filling in excavated earth after depositing sludge including sludge water and sprinkling bleaching powder over surrounding area and removing surplus excavated soil to nearby areas complete all as specified and directed. (Measurement shall be made for sludge incl sludge water).

Taking out of gully trap cover and CI grating and cleaning of sludges / silt from gully traps including rodings SGSW /CI pipe and gully trap to first manhole ( length n,exc 3 m ) and placing the existing CI grating , gully trap cover etc in original position including removing of rubbish / sludge outside the premises complete all as specified and directed .

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

Dismantling of cast iron or reinforced concrete drain pipes 75mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail 600 mm long complete all as specified and directed.

Supply and CP health faucet with 01 Mtr tube and hook complete all as specified .Make : Cat No:ALD-579 of Jaquar or equivalent complete all as specified and as directed.

Supply, spread river sand of approval in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid.

Supply & laying GI tubing light grade in protection of cable at roads crossing/hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed 40 mm dia.

Supply & laying PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm

Supply & laying on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 2 core 16 sqmm.

M & L for concealed conduit point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for: (a) One light point controlled by one, one way switch 5A, SP complete all as specified and as directed.

(b) One ceiling / exhaust fan point controlled by one, one way switch complete all as specified and as directed.

Description all as per item No 110 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.

Supply and fix switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified.

S and F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

Supply & fix exhaust fan metal body with lowvers of 300 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed by Engr-in-Charge.

S & F security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge.

M & L bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed by Engg in Charge

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and directed by Engg in Charge

S & F wall mounted box type LED of 18/22 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge.

S & F wall mounted LED batten of 09 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and directed by Engg-in-Charge.

Cutting of bituminuous road / hard standing of size not exceed 30 cm in width and not exceeding 90 cm in depth for laying of UG cable/protection Pipe including making good the disturbed portion so as to match with the existing finishes with PCC 1:2:4 type B1 concrete all as specified.

S & F wall mounted box type LED of 18/22 watt of size 4 ft with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge.

S & F wall mounted LED batten of 09 watt of size 2 ft with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and directed by Engg-in-Charge.

Supply & fix exhaust fan metal body with louvers of 300 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed by Engr-in-Charge.

Cutting of wall in rectangular shape and making hole suitable for mounting of 300 mm dia exhaust fan and making good disturbed surfaces matching with existing colour including grouting of nuts and bolts all as specified and directed.

K LAKSHMAN SINGH AND CO

VENKATA PRABHAVATHI CONSTRUCTIONS

PARDEEP AND CO

BEEGEE DESIGN SYSTEMS

S.R.M.K Enterprises