Construction of Toilet at Ganj Bazar Solan

Amount

Excavation in foundations in trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres.Soft rocks

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: a) Collumn, pillars, posts and struts.

Beams, cantilever, girders and lintels.

Flat Surface such as soffits of suspended floors, roofs, landings and the like.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in:Foundation footings bases of columns and the like and mass concrete.

Column,pillars, posts,and struts.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level

Brick work using common burnt clay building bricks in cement mortar 1:6(1cement:6 sand) all floors and all height. In cment mortar 1:6(1 cement: 6 Sand) Second class bricks

Half brick work using common burnt clay building bricks in cement mortar 1:4 (1cement:4sand)Second class bricks all floors and all height.

6mm Cement plaster to ceiling in cement mortar 1:4(1 cement: 4 Sand)

10mm thcik cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floors two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4(1cement:4sand)

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in Position. 1st Class Deodar Wood

Providing and fixing paneled glazed shutters for doors windows and clerestory windows including black enamaelled iron butt hinges with necessary screws. 50mmthick 1st Class Deodar Wood

Glass panes of 5.5 mm thickness (weight not less than 13.75 Kg/Sqm).

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreigen matter, sand papering and knotting. Readymixed paint brushing with white lead for priming.

Painting two coats( excluding priming coat) on new wood and wood based surfaces with ready mixed paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand papering and stopping. With white enamel paint.

Providing mild steel /tor steel reinforcment for r.c.c. work including bending ,binding and placing in position complete up to floor level . Tor steel

Stone work on plain Ashlar Cyclopean in superstructure upto floor two level including pointing with cement mortar 1:2 (1 cement :2 sand) in:-Cement mortar 1:6 (1Cement: 6 Sand)

Providing and fixing 10mm thick anti skid water proof stain and impact resistant heavy duty vetrified tiles Nitco or equivlant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3( 1cement:3 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles as required complete.

Precast terrazzo tiles hydraulic compressed 20 mm thick marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25mm average thickness of cement mortar 1;6( 1cement:6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles( wherever required) including rubbing and polishing complete

P& F to wall ceiling and floor galvanized mild steel ube (medium grade tube fittings nad clamps including making good the wall, ceiling and floor complete in all respect.a) 15mm moninal bore.

20mm Nominal bore

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm nominal bore by P & F tee including cutting and threading the pipes complete including all leads, lifts and carraige of material complete in all respect.

P & F ISI Marked high pressure PVC spigot and socket waste and ventilating pipes Isi marked including fixing with approve adhesive etc. a) 75mm dia .

110mmdia

P & F PVC Floor trap with greating ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc. complete in all respect. a) 110mmx75mm.

P & F vitreous China wash down, water clset squatting pan (India type WC pan) size 580mm complete in all respect as per the satisfaction of Engineer-in-charge( earth work, bed concrete, foot rest and trap to be measured and paid for saparately).a) Vitreous China Pattern-2 (|Anglo Indian)

P & F vitreous China wash down, water clset squatting pan (India type WC pan) size 580mm complete in all respect as per the satisfaction of Engineer-in-charge( earth work, bed concrete, foot rest and trap to be measured and paid for saparately).a) Orrissa Pattern: In white colour.

P & F PVC size P or S trap for water closet ISI marked including jointing the trap with the pan and PVC with approved adhesive etc a) 110mm dia.

Providing and fixing plastic seat cover ( solid/ hollow type) art cover for wash down water closet with C.P. brass hinges and rubber buffers: Solid type: White plastic seat and cover.

P & F vitreous China Wash basin with single hole for piller tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting complete in all respect. A) circular 460mm dia (Countertop)

P & F CP Brass Piller tap with capstan head complete in all respect. a) 15mm dia.

P & F CP Brass Bib tap with capstan head complete in all respect.a) 15mm dia.

Providing and fixing PTMT Angle cock of approved quality 15 mm with flange

Providing and fixing PTMT jet spray of approved quality with1.5 mm meter tube.

P & F Vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hamp (waste pipe to be measured and paid saperatly a) flat back type of size 430mmx260mmx350mm. Size in white colour.

Providing and fixing PTMT urinal cock of approved quality 15mm.

Providing and fixing PTMT urinal spreader of approved quality and colour.

Providing and fixing division plate for urinals as per satisfaction of engg. In Charge.

Providing and fixing brass full way value with wheel: 20mm nominal bore.

P & F 600x450mm beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screw and washers complete in all respect.600mmx450mm, 6mm thick A, C or plywood sheet.

Providing and fixing toilet paper holder C.P. brass.

Providing and fixing chromium plated brass soap dish with C.P. brass brakets fixed to wooden plug with C.P. brass screw

Providing and fixing PTMT grating round of approved quality 100mm nominal dia.

Providing and fixing anodized aluminium tower bolt (barrel type) anodized transparent or dyed to required color and shades with screws etc. complete including all leads and lifts. A) 150x10mm size.

Providing and fixing anodized aluminium handels(berrel type) anodized transparent or dyed to required color and shades with screws etc. complete including all leads and lifts. a)75mm size

Providing and fixing Man hole

Providing and PVC water storage tank IS : 12701 marked , G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 meters above ground level : 1000 ltr capacity water tank

Nitin Bhasin

VIKRANT SHARMA

Virender Thakur