Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32 LAccepted-AOC BLOCK C 14 GROUND FLOOR PLOT 618 624 BHIVANDIWALA TERRACE JAGANNATH SHANKARSHETH MARG DHOBI TALAO NEAR KALBADEVI POST OFFICE MUMBAI 400002 | MUMBAI | MAHARASHTRA | 400002 | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹37.6 L+₹5.6 L (17.5%)Rejected-Finance NEAR SWAMI SAMARTH MANDIR GROUND FLOOR 28 1 1 D SHIVRAJ NAGAR SAI MIRACLE ROAD RAHATNI PUNE 411 017 | PUNE | MAHARASHTRA | 411017 | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹38.4 L+₹6.4 L (20.1%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹38.5 L+₹6.5 L (20.3%)Rejected-Finance FLAT NO 601 TOWER NO 30 SECTOR NO 21 AMANORA PARK TOWN HADAPSAR PUNE 411028 | PUNE | MAHARASHTRA | 411028 | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹39.9 L+₹7.9 L (24.8%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
| Sl No | Description | Qty | Unit | Sneha Aircool L5 | ASHA ASSOCIATES L2 | KESARI AND SONS L6 | AGRAWAL ASSOCIATES L1 | LOKMANYA ENTERPRISES L7 | UNIQUE ENGINEERS L4 | PURVA ELECTRICALS AND ENGINEERS L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply only RGB/RGBW surface mounted Narrow (10°/20°) beam Flood luminaire with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 40W to 50W at steady state full intensity, Luminaire luminous flux range of 1800- 2000 Lumens. Power factor of complete luminaire 0.95 at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 Impact resistance level IK 07. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 Standards Approved complete all as specified and directed. | 14 | Each | 18,700 ₹2,61,800 | 16,500 ₹2,31,000 | 16,559 ₹2,31,826 | 13,000 ₹1,82,000 Lowest | 17,700 ₹2,47,800 | 18,000 ₹2,52,000 | 18,200 ₹2,54,800 |
| 2.00 | Supply only Warm White ( 2700 K ) surface mounted wide beam Flood luminaire with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 40 W to 50W at steady state full intensity, Luminaire luminous flux range of 1800- 4000 Lumens. Power factor of complete luminaire 0.95 at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 Impact resistance level IK 07. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 Standards complete all as specified and directed.. | 4 | Each | 11,200 ₹44,800 | 9,000 ₹36,000 | 8,279 ₹33,116 Lowest | 9,500 ₹38,000 | 8,850 ₹35,400 | 9,400 ₹37,600 | 11,200 ₹44,800 |
| 3.00 | Supply only RGB/RGBW surface mounted Narrow / Medium (25°/30°) beam linear wall Grazer luminaire (1000 mm) with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 40W to 55 W at steady state full intensity, Luminaire luminous flux range of 2000- 4000 Lumens. Power factor of complete luminaire 0.90, at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 and above. Impact resistance level IK 06. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 Standards Approved complete all as specified and directed. | 80 | Each | 18,900 ₹15,12,000 | 18,900 ₹15,12,000 | 19,999 ₹15,99,920 | 13,000 ₹10,40,000 Lowest | 22,125 ₹17,70,000 | 18,500 ₹14,80,000 | 15,600 ₹12,48,000 |
| 4.00 | Supply only RGB/RGBW surface mounted Narrow / Medium (25°/30°) beam linear wall Grazer luminaire (1000 mm) with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 18W to 25W at steady state full intensity, Luminaire luminous flux range of 700- 900 Lumens. Power factor of complete luminaire 0.90, at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 and above. Impact resistance level IK 06. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 complete all as specified and directed. . | 12 | Each | 18,500 ₹2,22,000 | 16,500 ₹1,98,000 | 18,625 ₹2,23,500 | 10,000 ₹1,20,000 Lowest | 19,912 ₹2,38,944 | 15,660 ₹1,87,920 | 14,520 ₹1,74,240 |
| 5.00 | Supply only RGBW Neon Flex strip Light for outdoor facade lighting .Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 14 W/ mtr to 15w/m at steady state full intensity complete all as specified and directed. . | 120 | RM | 5,600 ₹6,72,000 | 4,200 ₹5,04,000 | 5,999 ₹7,19,880 | 4,000 ₹4,80,000 Lowest | 6,637 ₹7,96,440 | 5,000 ₹6,00,000 | 5,200 ₹6,24,000 |
| 6.00 | Supply only Aluminium Profile for Neob Flex Light high Grade complete with all accessories Complete all as specified and directed | 120 | RM | 210 ₹25,200 Lowest | 250 ₹30,000 | 449 ₹53,880 | 500 ₹60,000 | 1,253 ₹1,50,360 | 450 ₹54,000 | 520 ₹62,400 |
| 7.00 | Supply and Fix Bollard Luminiare System Wattage should be 10W to 15W , Pf > 0.9 at full load. Input voltage 240V AC. Luminaire CCT to be 3000K + 255K. Product should be IP65. Made of 2.8mm thick MS material. Luminaire base 150mmX150mm and height 600mm Lumens ,Output 700 to 900 Lumens . Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate complete with all accessories Complete all as specified and directed | 12 | Each | 7,000 ₹84,000 | 11,000 ₹1,32,000 | 3,900 ₹46,800 Lowest | 6,500 ₹78,000 | 7,006 ₹84,072 | 9,000 ₹1,08,000 | 12,500 ₹1,50,000 |
| 8.00 | Supply only DMX controller DMX 512 x 2 (1024 channels), with Clock & Calender Triggering, 4N output Ports, USB and Ethernet connectivity port for programming / control, and Power Supply included micro SD card. complete with all accessories Complete all as specified and directed | 1 | Each | 2,10,000 ₹2,10,000 | 1,68,000 ₹1,68,000 | 1,59,900 ₹1,59,900 | 1,70,000 ₹1,70,000 | 2,13,875 ₹2,13,875 | 1,45,000 ₹1,45,000 Lowest | 1,72,000 ₹1,72,000 |
| 9.00 | Supply only DMX Splitter / Booster - Individual optical isolation per port. Housing types: Box. Min. 08 Port DMX Outputs per universe DMX line termination complete all as specified and directed. | 2 | Each | 23,100 ₹46,200 | 19,800 ₹39,600 | 25,869 ₹51,738 | 28,000 ₹56,000 | 32,450 ₹64,900 | 22,600 ₹45,200 | 18,200 ₹36,400 Lowest |
| 10.00 | Supply only DMX cable of (Two pair) having one 22/24AWG pair stranded (7x30) tinned copper conductors, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacket Cable. complete with all accessories Complete all as specified and directed | 500 | RM | 303 ₹1,51,500 | 340 ₹1,70,000 | 59 ₹29,500 Lowest | 350 ₹1,75,000 | 612 ₹3,06,000 | 100 ₹50,000 | 230 ₹1,15,000 |
Tender Value
₹43.6 L
EMD Value
₹87,500
Closing Date
22 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE KHADAKWASLA
GE KHADAKWASLA
PROVN OF EXTERNAL LIGHTING AT SANTOSH GUPTA HALL AT NDA KHADAKWASLA
2025_MES_742769_1
8019/E8
Open Tender
Civil Works
Item Rate
180 days
GE KHADAKWASLA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE KHADAKWASLA
₹87,500
Yes
6 Mar 2026
3 Dec 2025
24 Dec 2025
3 Dec 2025
22 Dec 2025
17 Dec 2025
3 Dec 2025 - 17 Dec 2025
Amount
Supply only RGB/RGBW surface mounted Narrow (10°/20°) beam Flood luminaire with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 40W to 50W at steady state full intensity, Luminaire luminous flux range of 1800- 2000 Lumens. Power factor of complete luminaire 0.95 at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 Impact resistance level IK 07. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 Standards Approved complete all as specified and directed.
Supply only Warm White ( 2700 K ) surface mounted wide beam Flood luminaire with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 40 W to 50W at steady state full intensity, Luminaire luminous flux range of 1800- 4000 Lumens. Power factor of complete luminaire 0.95 at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 Impact resistance level IK 07. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 Standards complete all as specified and directed..
Supply only RGB/RGBW surface mounted Narrow / Medium (25°/30°) beam linear wall Grazer luminaire (1000 mm) with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 40W to 55 W at steady state full intensity, Luminaire luminous flux range of 2000- 4000 Lumens. Power factor of complete luminaire 0.90, at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 and above. Impact resistance level IK 06. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 Standards Approved complete all as specified and directed.
Supply only RGB/RGBW surface mounted Narrow / Medium (25°/30°) beam linear wall Grazer luminaire (1000 mm) with suitable driver either built in or externally provided for outdoor applications of Facade Lighting, depending on Client and site requirement. Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 18W to 25W at steady state full intensity, Luminaire luminous flux range of 700- 900 Lumens. Power factor of complete luminaire 0.90, at full intensity. Luminaire should be compatible for DC24v/48V power supply with suitable integral/non- integral power supply unit. Luminaire should be compatible to DMX512 control protocol. The luminaire should have powder coating aluminium housing. Ingress Protection IP 66 and above. Impact resistance level IK 06. Operating Temperature: -10°C to +50°C, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate all technical Parameters should comply IS 10332 complete all as specified and directed. .
Supply only RGBW Neon Flex strip Light for outdoor facade lighting .Luminaires should be enabled with high/mid power LEDs, should consists of anti-aging and anti-UV high optical efficiency temperature resistant lenses, suitable for architectural lighting as per site requirement. Power consumption should be 14 W/ mtr to 15w/m at steady state full intensity complete all as specified and directed. .
Supply only Aluminium Profile for Neob Flex Light high Grade complete with all accessories Complete all as specified and directed
Supply and Fix Bollard Luminiare System Wattage should be 10W to 15W , Pf > 0.9 at full load. Input voltage 240V AC. Luminaire CCT to be 3000K + 255K. Product should be IP65. Made of 2.8mm thick MS material. Luminaire base 150mmX150mm and height 600mm Lumens ,Output 700 to 900 Lumens . Manufacturer should submit >> Design Simulation, Technical Data Sheets , LM79, LM80 Reports , Fixture IP Testing Report as Separate complete with all accessories Complete all as specified and directed
Supply only DMX controller DMX 512 x 2 (1024 channels), with Clock & Calender Triggering, 4N output Ports, USB and Ethernet connectivity port for programming / control, and Power Supply included micro SD card. complete with all accessories Complete all as specified and directed
Supply only DMX Splitter / Booster - Individual optical isolation per port. Housing types: Box. Min. 08 Port DMX Outputs per universe DMX line termination complete all as specified and directed.
Supply only DMX cable of (Two pair) having one 22/24AWG pair stranded (7x30) tinned copper conductors, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacket Cable. complete with all accessories Complete all as specified and directed
Supply only water proof (IP 67 rating) Male-Female Connector set (Same as Light Connectors) for connecting DMX cables complete all as specified and directed..
Supply only water proof (IP 67 rating) XLR connector cable Male to Female set for connecting DMX cables complete all as specified and directed..
Supply only 1.1 kV grade 3C x 1.5 sq.mm., stranded copper conductor, PVC insulated cable with non metallic rigid PVC conduit not less than 20mm dia incl conduit accessories such as bend , impution cover, socket etc fixed with the help of saddle clips for AC source complete all as specified and directed..
Supply only 1.1 kV grade 3C x 2.5 sq.mm., stranded copper conductor, PVC insulated cable with non metallic rigid PVC conduit not less than 20mm dia incl conduit accessories such as bend , impution cover, socket etc fixed with the help of saddle clips for AC source complete all as specified and directed.
Supply only 2C x 2.5 sq.mm., stranded copper conductor, PVC insulated cable with non metallic rigid PVC conduit not less than 20mm dia incl conduit accessories such as bend , impution cover, socket etc fixed with the help of saddle clips for DC Supply complete all as specified and directed
Supply only 2C x 4 sq.mm., stranded copper conductor, PVC insulated cable with non metallic rigid PVC conduit not less than 20mm dia incl conduit accessories such as bend , impution cover, socket etc fixed with the help of saddle clips for DC Supply complete all as specified and directed
Supply only water proof DC POWER SUPPLY UNIT(Driver). 200 to 250 watt complete with all accessories Complete all as specified and directed
Supply only Distribution Box VTPN 4 way with MCCB 160 Amps 16 KA with 12 Nos of SP MCBs 6 to 32 Amps complete with all accessories Complete all as specified and directed
Provision for Programming of software with 08 no of themes by qualified rep of OEM complete testing and trail run of themes as per site requirement upto satisfaction and approved by GE for DMX control system complete with all accessories Complete all as specified and directed
Installation Charges incluiding supply of accessories like-screws, fastner, angles, JB. Fixing of Panel, Conduiting, Cabling, luminary fittings, controller ,Distribution Box,DMX Splitter / Booster,DMX controller,Aluminium Profile,digital timer switch distribution board,MCB etc.complete all as specified and directed Note: (i) Items like Conduiting, Cabling, luminary fittings, controller ,Distribution Box,DMX Splitter / Booster,DMX controller,Aluminium Profile,digital timer switch, DBs, MCB etc., shall be measured and paid separately under respective supply only item of this BOQ. (ii) Miscellanious items required during installation expect supply only items under this BOQ shall deemed to be included in unit rate quoted under this item
M&L XLPE insulated, armoured heavy duty electric cable with aluminium multistrand conductor, 1100 volts grade, cross sectinal area 6 sqmm 4 core complete all as specified and directed
Excavation in trenches in hard/dense soil n.exc 1.5 M wide and not exceeding 1.5 mts in depth in wide for laying of cables and n exc 1.5 mtr in depth and getting out incl dressing/trimming sides and levelling/grading and ramming of bottom of excavation complete all as specified and directed.
Returning and filling in, including spreading and well ramming in layers n exc 25 cm all as specified and directed.
Removing excavated surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed.
M&L PCC 1:3:6 type C-2 (using 40 mm size graded stone aggregate) as in foundations, filling and mass concrete for bollard lights complete all as specified and directed
M&L for PCC 1:2:4 type B-2 (sing 40 mm size graded stone aggregate)as in coping of bollard lights including necessary form work as required complete all as specified and directed
M & L for road surface reinstatement for a 40mm diameter GI medium grade pipe road crossing. This includes cutting, installing, and all associated labor, materials, tools, and plant (T&P) as specified, including all required Plain Cement Concrete (PCC) work complete all as specified and directed. Note: The quoted rate must be inclusive of: 1.The cost of the 40mm diameter GI medium grade pipe. 2.All costs associated with restoring the disturbed road surface to match the existing. 3.All costs associated with the required Plain Cement Concrete (PCC) work."
Supply only distribution box 2 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, complete all as specified and directed Make: Legrand Catpart No 601932 or equvaleint make as mentioned at list of makes in PS
Supply only C Curve MCB SPN 10 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed
Supply and laying 40 mm outer dia, double walled corrugated (DWC) HDPE duct pipe confirming to IS-16205 Pt-24 with antirodent and non flame propogating properties of approved colour complete with fittings i.e.coupler,Tee, elbow clamp for cable protection complete all as specified and directed
Supply only digital timer switch distribution board, factory assembled in powder coated sheet steel enclosure, comprising of 40 Amps 3 Pole MCB, power contactor and 230V digital time switch for controlling LED/SV etc street lights , including earth work for fixing Timer switch distribution Board and shall be provided 4 Nos 35x35x4mm thick angle iron supports of not less than each 0.6 mt height duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth as per site requirement complete all as specified and directed
Supply only DMX signal decoder for LED strips complete all as specified and directed Note for srl item No.1 to6, 8 to 18, 28, 29, 31 &32: installation/fixing for supply only items shall be measured and paid under srl item No..20
ASHA ASSOCIATES (BID ID -3507540)
PURVA ELECTRICALS AND ENGINEERS (BID ID -3514289)
UNIQUE ENGINEERS (BID ID -3508823)
Sneha Aircool (BID ID -3506514)
KESARI AND SONS (BID ID -3507662)
LOKMANYA ENTERPRISES (BID ID -3508421)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
8019.pdf
Tender Documents • 0.89 MB
BOQ_831754.xls
BOQ • 0.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .