SPECIAL REPAIRS TO STATION OFFICERS MESS BLDG NO GB-2 AT MILITARY HOSPITAL, BELGAUM UNDER GE BELGAUM.

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Description all as per item no :01 here in before but bedded in lime or cement mortar

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description and taken as credit complete. all as specified and as directed.

Material and labour for Cement Concrete Eterna Fiery Red (Plain red) tiles of size 420mm x 330mm x 12 mm thick tiles in roofing. Interlocking at side joints laid dry . complete all as specified and as directed . Note : Make of Tile : Pioneer/ Monier

Material and labour for Cement Concrete Eterna Fiery Red (Plain red) Ridge Cap of size 330mm x 207mm x 15 mm thick ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note : Make of Ridge cap : Pioneer/ Monier

Material and labour for Cement Concrete Eterna Fiery Red (Plain red) Hip Starter of size 360mm x 210mm x 17 mm thick ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note : Make of Hip starter : Pioneer/ Monier

Material and labour for Cement Concrete Eterna Fiery Red (Plain red) three way cap / toplex of size 351mm x 160mm x 429mm x 15 mm thick ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note : Make of three way cap : Pioneer/ Monier

Material and labour for Cement Concrete Eterna Fiery Red (Plain red) barge end of size 330mm x 429mm x 15 mm thick ,bedded and jointed in cement mortar 1:6complete all as specified and as directed. Note : Make of barge end : Pioneer/ Monier

Supply and fix Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with L or J-Type bolts or cranked bolts in roofs, walls etc. with grade of zinc coating 275 including dismantling of the existing sheets of any description and taken as credit complete all as specified and as directed.

Supply and fix Rolled mild Steel work in tubular trusses, posts,rafters, truss etc including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and as directed .

Supply and fixMild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets as in cleats confirming to Fe 290 Gde-E-165 complete all as specified and asdirected.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed complete all as specified and as directed .

Description all as per item no ; 13 here in before but except timber

Dismantling of stone slab or tiles of any description in floors, aprons etc., laid bedded and pointed in any mortar and taken as credit complete all as specified and as directed.

Material and labour for Double Charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm n exc 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile and laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Make: Kajaria / HR Johnson / Somany

Material and labour for Chequered cement concrete tiles glossy finish of size 30cm x 30cm x 25mm thick in floors with grey cement and pigment set, jointed and pointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile and laid over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position , unreinforced including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for 75mm thick Plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring etc including necessary steel form work complete all as specified and as directed .

Material and labour for Machine pressed precast concrete interlocking colour paver block any shape and size with glossy finish on top confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment M-35 grade complete all as specified and as directed.Note : Make of Paver Block : Eurocon / Ultra tiles / Mehtab / Nitco

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured and paid for payment .

Material and labour for Hardcore of gauge n exc. 63 mm with broken stone boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C2 using 40mm graded stone aggregate, 75mm thick as in plinth protection, path etc, and finishing the surface even and fair without using extra cement including necessary steel form work complete all as specified and as directed .

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises completre all as specified and as directed.

Material and labour for 25mm thick Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base for flooring including necessary steel form work complete all as specified and as directed .

Material and labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tileand laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note :Make of Tile : Kajaria / HR Johnson / Somany

Material and labour for Premium quality Coloured non skid ceramic tiles, 6 to 7mm thick , Matt finish ,area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile and laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note :Make of Tile : Kajaria / HR Johnson / Somany

Material and labour for Premium quality Coloured glazed ceramic tile of size 300mm x 450mm x 7 to 8mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tile including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. Note :Make of Tile : Kajaria / HR Johnson / Somany

Material and labour for Machine cut Granite stone slab 16 to 18mm thick, Premium quality, ruby redcolour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab and including over20mm thick screed bed in cement mortar 1:4 including rubbing and polishing complete all as specified and as directed.

Material and labour for Machine cut Granite stone tile, 16 to 18mm thick, Premium quality as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing and 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Material and labour for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces as in backing coat of skirting, dado etc complete all as specified and as directed.

Supply and fix 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grids of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying two coats of oil bound distemper on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces and taken as credit complete all as specified and as directed. .Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Supply and fix Aluminium composit panel board 4mm thick fixed over existing wooden/steel frames with necessary frame work with screwing and scaffolding including dismantling of old unserviceable board of any description and taken as credit complete all as specified and as directed..

Taking down chowkhat with shutters (without taking off shutters from the frame) of area n exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of areaexc 1.5 Sqm each & n exc 4 Sqm.and taken as credit complete all as specified and as directed

Taking down shutters of any description of area n exc 1sqm each .and taken as credit complete all as specified and as directed

Taking down shutters of any description of area exc 1sqm and n exc 2.0 sqm each and taken as credit complete all as specified and as directed

Material and labour for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed. Note :(i) Make of Aluminium section : Jindal/Hindalco/Indal (ii) Minimum thickness of Powder coating shall be of 50 Microns

Material and labour for Powder coated aluminium frame work as in doors, windows, ventilators and partitions with one or more rebates using standard aluminium extruded sections including provision of joining cleats ,glazing clips, hinges, handles, etc.compete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels wherever required shall be measured and paid separately. (iv) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of Powder coating shall be of 50 Microns

Material and labour for 5.5mm thick Sheet glass ordinary quality and glazing with glazing clips in square exc 0.5 sqm in each pane complete all as specified and as directed. Note : Make of Glass :Saint Gobain/Modi Guard/ Gold Fish

Material and labour for Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels and provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc.complete all as specified and as directed. Notes: (i) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (ii) Make of Glass : :Saint Gobain/Modi Guard/ Gold Fish (iii) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of anodisation shall be of 15 Microns

Material and labour for 5.5mm thick Sheet glass ordinary quality and glazing with glazing clips in square n exc 0.5 sqm in each pane complete all as specified and as directed. Note : Make of Glass :Saint Gobain/Modi Guard/ Gold Fish

Supply and fix 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .Note Make of Particle board : Anchor/KitPly/Century

Supply and fix in repairs for 18/19mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work with decorative veneer on one face complete all as specified and as directed.Note : Make of Particle board : Anchor/KitPly/Century

Supply and fix Solid PVC frame (Single rebated) of size 60mmx30 mm made out of solid PVC Foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing . Note : Door frame shall be water proof ,termite proof ,elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Material and labour for Factory made Second class hard wood plain framed, panelled shutter (two panel),35 mm thick with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated . complete all as specified and as directed.

Material and labour for Factory made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with deco rative face veneer with lipping/frame to matchcomplete all as specified and as directed .

Supply and fix Stainless steel butt hinges 100mm in size, medium weight fixed with SS screws complete all as specified and as directed .

Supply and fix Aluminium anodised barrel tower bolts of extruded section of 100mm long complete all as specified and as directed..

Supply and fix Extrude Aluminium alloy handle, 'D' type, anodised 100 mm in size complete all as specified and as directed .

Taking up or down steel tubing 15 mm dia and connection and taken as credit complete all as specified and as directed

Description all as per item no :53 here in before but 25 mm dia

Supplying and laying 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed. Note : Make of CPVC Pipe : Ashirwad/Astral

Supplying and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed.Note : Make of CPVC Pipe : Ashirwad/Astral

Supply and fix in repairs Vitreous china wash basin white flat back size 550x400mm , including CI Brackets and cutting for and pinning in ends of CI brackets or erecting stand etc.complete all as specified and as directed.

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of white colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe complete all as specified and as directed.

Supply and fix in repairs Vitreous China urinal,Half stall type, white, with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back with cement, connecting to waste pipe complete all as specified and as directed .

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed. Note Make : Parryware (Slim Line) /Hindware/CERA

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 600mm long complete all as specified and as directed.Note : Make : Prayag/M/S Shakthi Industries

Supply and fix in repairs Brass chromium plated perforated shower rose with swivel joint type 125mm size suitable for fixing with 15mm bore pipe including 195 mm long brass CP shower arm complete all as specified and as directed.

Supply and fix in repairs Stainless steel Towel rail, 'D' type, 600mm long between flanges fixed with stainless steel screws and wooden/ plastic cleats complete all as specified and as directed

Supply and fix in repairs 15mm bore Pillar taps brass chromium plated with capstan heads, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for iron pipe for unions complete all as specified and as directed.Note : Make : Metro / GEM /ESS ESS

Supply and fix in repairs 15mm bore Stop valves, fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions complete all as specified and as directed. Note : Make : Metro / GEM /ESS ESS

Supply and fix in repairs 15mm bore stop valves, fancy type, brass chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.. Note : Make : Metro / GEM /ESS ESS

Supply and fix health faucet (ABS body) Mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed . Note : Make : Metro / GEM /ESS ESS

Supply and fix in repairs 15 mm bore Bib tap, long body, brass chromium plated, fancy type with wall flange and crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Note : Make : Metro / GEM /ESS ESS

Supply and fix in repairs 3 way mixer tap for mixing hot and cold water fancy type brass chromium plated screwed down for 15mm bore GI pipe complete all as specified and as directed Note:Make :Jaquar Wall Mixer CON-273KNUPR - CON-273KNUPR or equivalent model in Hindware/MARC

Supply and fix in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed . Note:Make :Jaquar or equivalent model in Hindware/MARC

Supply and fix stainless steel corner shelf for Bath/WC complete all as specified and directed.Note: PRAYAG, Diamond or equivalent make in Commander

Supply and fix Brass, Chromium Plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed. Note: Make: Cat No.ACN 1151N of JAQUAR or equivalent model in Johnson/ ESS ESS.

Supply and fix in repairs soap dish, any type of size 160mmx160mm x90 mm, fixed with chromium plated brass screws and plugs complete all as specified and as directed. Note:Make :Jaquar or equivalent model in Hindware/MARC

Supply and fix in repairs Mild steel powder coated curtain rods with rounded fancy ends, 25mm dia including Provision of suitable MS CP brackets and fixing the same with holding screws including necessary drilling and plugging etc complete all as specified and as directed.

Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Joyna

Supply and fix in repairs 1mm thick stainless steel plate rack, overall size not less than 775x900x250mm deep fixed to walls with rawl plug at suitable size with SS screws complete all as specified and as directed. Make: Silver Shine . Model No: SSKPR-315

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar and removal of debris off the premises complete all as specifiedd and as directed.

Supply and fix in repairs 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 110 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 75mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) vent cowl all as specified and directed. Note : Make : Finolex/Supreme/Prince

Supply and fix PVC (SWR) floor trap of 75mm dia outlet plain with grating including jointing with solvent cement complete all as specified and as directed Note : Make : Finolex/Supreme/Prince

Material and labour for PVC (SWR) gully trap of size 125/110mm, setting & jointing with solvent cement. complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Material and labour for 25mm thick Rendering in cement mortar 1:6 over stone masonry surfaces and finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls built in cement mortarand removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortor 1:6 on stone masonry surfaces finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls builts in cement mortar rand removal of rubbish off the premises complete all as specified and as directed.

Supply only water proofing compound Note :Make :Impermo/Roff/Cico

Material and labour for Preparing newly plastered surfaces of wall of any description and applying two coats of Plastic emulsion paint over a coat of water based primer coat and a coat of 1 mm wall care putty complete all as specified and as directed .

Material and labour for Preparing old plastered surfaces of wall any description t and applying two coats of Plastic emulsion paint over a coat of water based primer coat and a coat of 1 mm wall care putty complete all as specified and as directed .

Material and labour for Two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over newly plastered surface complete all as specified and as directed.

Material and labour for complete removal of existing treatment and Preparation of old surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc and applying two coats of exterior acrylic emulsion paint over Alkali resistant priming coat complete all as specified and as directed.Note : Make :Asian Paits Ltd (Apex paint)

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer. complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink oxide primer.complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., and taken as credit (measured overall as fixed along the centre line over fittings and accessories). complete all as specified and as directed

Supply and fix PVC (SWR)eaves gutter half rounded 160mm dia complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of existing precast concrete articles of any description and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Providing PCC 1:2:4 ,Type B-1(using 20 mm graded stone aggregate) as in plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs ,water troughs and the like including weathering, slightly rounded complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement .complete all as specified and as directed

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint (Apex paint) over water based primer complete all as specified and as directed.

Supply and fix Mild steel framed work such as windows grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed,guard bars and similar work,confirming to Fe.290.Gde-E-165 completeall as specified and as directed .

Supply and fix in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Material and labour for Providing and fixing Stainless steel (Grade 304) railing made out of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories with stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

S & F 12mm thick toughned glass for stainless steel railing complete all as specified and as directed

Demolition of Concrete in ground floors, road cutting and pavings exc 15 cm thickness (below or above ground level) unreinforced and removal of debris off the premises complete all as specified and as directed .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation n exc 10 sq m on plan and getting out hard/dense soil complete all as specified and as directed.

Material and labour for Plain Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry 1:3:6 type C1(using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width set in CM 1:6 complete all as specified and as directed.

Material and labour for Plain Cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) in surface channel and drains including necessary steel form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Material and labour for Rendering in cm 1:6 ,15mm thick on fair faces of brick work or concrete surfaces using water proofing compound and finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for 40mm bore dia Galvanised steel tubes, medium grade with all fittings as in cattle traps embedded into brick wall of concrete block and making the disturbed surfaces to match with the adjoining surface complete all as specified and as directed . Note : Make : TATA/JINDAL/Prakash Surya

Supply and fix Rolled Mild steel sections as in main and cross beams, hip and jack rafters; purlins connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe-290(gde E-165) complete all as specified and as directed

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Material and labour for Plain Concrete bed type D2 1:4:8 Using 40mm graded stone aggregate to drain pipe of 150 mm bore dia including packing under and haunching against the side of pipes after they are laid and tested in complete all as specified and as directed

Material and labour for Reinforced concrete pipes of 150mm bore dia CLASS - NP2 (ISI MARKED ) laid in trenches and jointed complete with collars complete all as specified and as directed

Material and labour for Providing Precast RCC slab 1:2:4 type B1 using 20 mm graded stone aggregate as in manhole cover slabs set in CM 1:6 including necessary steel form work ,moulds etc complete all as specified and as directed

Material and labour for Mild steel TMT bars 10 mm dia and over cut to length bent to shape required ,including cranking ,bending ,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed

Supply and fix 300 mm Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed

Taking down carefully old unserviceable sub main wiring of Aluminium conductor cable of sizez 2.5 and 4 sq.mm and taken as credit complete all as specified and as directed.

Material and labour for Point wiring 1.5 Sqmm single core FRLSH PVC insulated unsheathed 1100 volts grade copper conductor multi-stranded cables for phase and neutral drawn through and including PVC casing capping (ISI Marked )of suitable size with all necessary fittings and provision of one run of Green coloured FRLSH PVC insulatedunsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way including taking down unserviceable point wiring from existing surfaces of any description and taken as credit complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/ Havells (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 123 here in before but for One fanpoint controlled by one switch and regulator

All as described in item No. 123 here in before but for one call bell point controlled by one bell push

All as described in item No. 123 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 123 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 123 here in before but forOne exhaust fan point controlled by one switch

All as described in item No. 123 here in before but for One light point controlled by two 2 way switches.

All as described in item No. 123 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix in repairs Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular switch piano type 6 Amps flush button 230 volts AC two way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular bell push flush type AC 230 Volts 6 Amps, 1 module complete all as specified and as directed.Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular fan regulator electronic step type ,120 watts , 2 module suitable for 1200/1400 mm sweep ceiling fan completeall as specified . Make -Anchor (Roma)/Rider

Supply and fix in repairs or replacement of PVC or Polycarbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Call bell, ding dong, 230 volts AC supply completeall as specified . Make -Anchor (Roma)/Rider

Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sq mm drawn through and including PVC casing and capping (ISI Marked) of suitable size with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sq mm for earth continuity and connected to common earth dolly , ,complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 4.0 sqmm and 01 run of 4.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm for earth continuity and connected to common earth dolly , ,complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware

Supply and fix in repairs Inverter type LED INTEGRATED BATTEN tube light fitting 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO20 or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs Inverter LED INTEGRATED BATTEN tube light fitting type 10 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO10 or equivalent price and specification of M/S Wipro/CG.

Supply and fix 1 feet LED 05 watts integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . Note :Make :- Havells Lumifine plus or equivalent price and specification in Philips/CG/Wi[pro

Supply and fix Wall light lamp alongwith all accessories connecting up with twin core twisted cable lamp from point to lamp 20 watt LED Oval shape Wall mounted light complete all as specified and as directed . Note : Make : Model:-Philiphs 31425 20-watts E27 LED or equivalent price and specification of in Wipro/CG

Supply and fix in repair LED Picture light 7 watts indoor type corded-electric metal synthetic modem type of size 355 x 180 x 95 mm 3 k ,wall mounted energy efficient including connection with all accessories and suitable size copper wire and fixing the fitting on suitable size of PVC / wooden round block complete all as specified and directed . Note : Make : Model in Philips 31402 LED picture light or equivalent price and specification of in Wipro/CG

Supply and fix in repair LED spot light round type 6 watts grey/metal synthetic including connection with suitable size copper wire & fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed . Note : Make : Philips /Wipro/CG

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . Philips cat part no : RC370B LED30S-6500 or Equivalent price and specification in M/S Wipro/CG

Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.. Note : Make :Philips BRP020 LED HP/CW 240V 25Wequivalent price and specification of M/S Wipro/CG

Supply and fix Round shaped LED lamp 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed . Note : Make : Philips /Wipro/CG

Supply and fix Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and as directed. Make: Havells ENDURA RUGBY NEO N- IP65 or equivalent price and specification in Philips/ Wipro

Supply and fix ceiling fans complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) and taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : (i) Make:-Bajaj /Crompton/Orient (ii) Old ceiling fan will be deposited in MES store yard

Supply and fix Exhaust fan made out of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm ,heavy duty with necessary grouting and fixing arrangements and provision of 3 core flexible FRLSH PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed . Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Supply and fix Exhaust fan made out of steel body complete with louvers shutter, voltage 230V, 50 Hz, heavy duty, Copper winding of sweep 450 mm ,heavy duty with necessary grouting and fixing arrangements and provision of 3 core flexible FRLSH PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Supply and fix Wall mounting fans 230 V single phase 400 mm sweep , heavy duty with all accessories fixed to wall with all necessary brackets ,bolts nuts etc including testing and making good disturbed surfaces complete all as specified and as directed Make:- Almonard/Bajaj/Khaitan

Taking down old unserrviceable MCB DB alongwith MCBs with old wooden boards and making good to disturbed surfaces to match with the existing surface and taken as credit complete all as specified and as directed

Supply and fix Factory made epoxy powder coated distribution board double door TPN 8 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.00 mm thick CRCA sheet and fixed flush on wall on sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified & directed. complete all as specified and as directed. . Make: Siemen /Legrand/ABB

Supply and fix MCCB TP 125 A 25KA 50HZ AC supply current rating conforming to IEC-609472 & IS-139473 including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Legrand/ABB

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.00mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Make : Legrand/L&T/Indo Asian

Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.60 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 2 SP MCBs as outgoings complete all as specified and as directed .Make : Legrand/L&T/Indo Asian

Supply and fix Miniature circuit breaker (MCB) of SPN 40 to 63 AMP 240V, 10KA 'C' curve following poles including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Legrand/ Indo Asian /ABB

Supply and fxi MCB SP 240 Volt capacity 5 to 32 Amps‘C’ curve, complete all as specified and as directed. Make: Legrand/ Indo Asian /ABB

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2.0 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes etc and getting out in any type of Soil complete all as specified and as directed.

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Returning, filling in excavated soil including spreading levelling and well ramming in layers n exc 25cm thick .complete all as specified and as directed.

Removing excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point .complete all as specified and as directed.

Supply and lay 25 mm bore Galvanized iron pipe , “Light grade”, including all fittings and fixed on pole/walls/in road etc for cable protection complete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

Taking up or down steel tubing of size upto 40 /25mm bore and connections and taken as credit complete as per specified and as directed.

Supplyind and laying CPVC pipes 40 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete and demolition/taking down of existing RCC/PVC water storage tank of any description from the existing staging/ Building after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed.Note :Make of HDPE Tank :Sintex/Polycon /Infra

Supply and fix 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Make : Prayag/M/S Shakthi Industries

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Supply and fix Fancy type Chromium plated Bib taps of 15mm dia cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule. complete all as specified and as directed.Make : Metro/GEM/ESS ESS

Material and labour for Construction of valve chamber of internal size 900 x 900 x 960mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle iron frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as directed.

M/s. KIRAN M CHOUGULE

N K CONSTRUCTION

ASHOK M RAJGOLKAR

RAJENDRA KRISHNA SARAF

DHANSHRI ENTERPRISES

M G KANADIKAR ENGINEERS AND CONTRACTORS

M/S JAYDEEP CONSTRUCTION

Manak landmarks