Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹34.5 L
Closing Date
4 Oct 2024, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
KRISHNAREDDY G.T
Construction of 220kV DC Transmission line to LILO 2nd circuit of 220kV Mahalingapur- Kudachi DC Transmission line at 220kV Athani Sub-station for a distance of 25.567km along with shifting of 110kV Athani- Haliyal DC Transmission line from Tower No. 11 to 3 for a distance of 2.319km and decommissioning of 220kV & 110kV line Materials/ Equipments and Construction of 2 Nos. of 220kV Terminal Bays at 220kV Athani Sub-station in Athani Taluk, Belagavi District on Total Turnkey Basis under Green Energy Corridor -Phase II including Supply of all Materials/Equipments and Erection (including Civil Works) of all Materials/Equipments, Testing and Commissioning
KPTCL/2024-25/TL/WORK_INDENT872
KPTCL/2024-25/TL/WORK_INDENT872
Open
Transmission Line
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for clause no.3.2 (b)(i) of ITT,Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer
Documentary proof for clause no.3.2 (b)(ii) of ITT, Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer
Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates and Auditors Reports of the last five years preceding the date of bid submission of the Bidder duly certified by chartered Accountant as in clause no.3.2 (a) of ITT
Bankers Certificate duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities) for assessing the Liquid Assets (Letter of Credit/ Certificate from banks for meeting fund requirement)
i.Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years taking into account the completed as well as works in progress and the statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause and shall be in the prescribed format as in clause No: 1.5 of QI
OR Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years taking into account the completed as well as works in progress and statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works as sought in Note of the said clause and shall be in the prescribed format as in clause No: 1.5 of QI
Self-declaration as sought in clause no.3.6 Note (ii) of ITT and at clause No.1.5 of Section-3-QI stating that, the information with regard to assessed available tender capacity (Works on Hand) furnished are correct to be uploaded
Valid Super grade Electrical Contractors License issued by the Government of Karnataka as on the date of bid submission as per clause no.2.3 of ITT, failing which the offer is liable to be rejected
Power of Attorney in favor of all the persons signing the documents and a certified copy by the Company Secretary/ Authorized Signatory for power of attorney holder shall be attached as evidence for authentication as in Annexure-X1
Letter of Undertaking as per Annexure-V of Section-4
Certificate of Incorporation of the Individual or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
Self-declarations in respect of Litigation, dis-qualification/Black listed due to non-performance & Risk & cost, Country which shares a land border with India as specified in Annexure XVI and Annexure XVII and as per clause no. 2.3 & 2.4 (b), (c), (d) & (e) of ITT
GST registration, PAN etc., of the Tenderer as per clause no.3.10 (xiii) of ITT
The Qualification and experience of key Personnel proposed for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
No Deviation Certificate as per Annexure-I of Section-4
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Copies of original documents defining the Constitution or legal status, Place of Registration(upload copy) and Principal place of business of the Bidder written Power of Attorney to the Signatory of the Bid to commit the Bidder to the Contract along with the resolution passed in this regard by the Board of Directors / all the Partners of the Firm
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information
Undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https//kptcl.karnataka.gov.in, Link Tendering & Procurement application for Vendor registration etc as per Annexure -XIV of Section-4
Certificate is to be uploaded by the Tenderer agreeing to source the equipment/ material for the work from the Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as per Annexure -XVII of Section-4
proposed methodology and program of construction backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per approved Activity chart as per clause No.1.13 of Section-3-Qualification Information
Type test reports as per tender documents / technical specifications
All details as called for in the Technical specifications of all the equipments/ materials of the Tender
Any other required documents as per the qualifying requirements, terms and conditions of the tender, NIT & Technical specifications
Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only
₹7,500
₹34.5 L
24 Sept 2024
24 Sept 2024
5 Oct 2024
25 Sept 2024
25 Sept 2024
CIRCUIT BREAKER : SF-6 circuit breakers with rigid, bi-metallic terminal connector suitable for Drake ACSR with spring/semi pneumatic/ pneumatic type operating mechanism with mounting structure comple...
ISOLATORS : Isolators including marshalling box,Rigid type terminal connectors with solid core cylindrical post insulators as per technical specifications.
220 kV, 1250 A, 40kA class double break Elec...
2) Upright mounting type without Earth switch LPH 8250 mm.
3)Upright mounting type without Earth switch LPH 5750 mm.
4)Underhung mounting type without earth switch
Note:Terminal connectors for Isolators :
Rigid type suitable for Drake ACSR- 48 Nos
Flexible type suitable for 63mm Al.pipe -12Nos
CURRENT TRANSFORMER :
Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with with marshalling KIOSK complete as per technic...
CAPACITIVE VOLTAGE TRANSFORMER :Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.
245kV class,CVTs 4400 PF, 220kV...
SURGE ARRESTOR : (Procelain housing) metal oxide gapless type with rigid bimetallic terminal connectors as per technical specifications..
198 kV, 10 KA, class -III, Heavy duty Metal oxide.
Control and Relay panel Complete SAS Compatible :
220 kV Line panel Type 2L( as per Annexure RPP1-SAS)
1)The Accuracy class of metering core of CTs and also trivector meter of control & ...
Total Weight of Station structures & Mounting Structures (excluding Bolts & nuts)
Total Weight of Bolts & nuts of Station structures & Mounting Structures
Rigid bus with taps & clamps:
(i) Aluminium Tube conforming to 6340 WP of IS-5082 / 1969 (BS 1600-Sch.40) of 75 mm size - 220 kV side
ii. Aluminium Tube conforming to 6340 WP of IS-5082 / 1969 (BS 1600-Sch.40) of 63 mm size for connecting isolator to vertical tap - 220 kV side & 110kV side
iii. Inverted V taps made of 63 mm Aluminium Tube (BS - 1600) of 2500mm vertical height for vertical portion and cross bus on 220 kV Side with rounded off End.
iv. Post insulator clamps suitable for 75 mm Aluminium pipe and post insulator Solid core type
b) Expansion type
c)Corona Bell suitable for Aluminium pipe 75mm on 220kVside
Post Insulators-Cylindrical Solid Core Insulators as per IS : 5350, Part-II & III & as per technical specification:
1. For 220kV side -2 units/stack
Post Insulators of Rigid Bus
2.11kV,120 KN Disc Insulators:
(Refer TechnoCommercial Sheet for details)
3.11kV,90 KN Disc Insulators :
(Refer TechnoCommercial Sheet for details)
INSULATOR HARDWARE & CLAMPS as per technical specification:
1. Bolted type Single Tension clamp with hardware suitable for DRAKE ACSR 120KN,20mm -220 kV side
2. Bolted type Single Suspension clamp with hardware suitable for Drake ACSR 90KN,16mm -220 kV side
3.C type Wedge connectors:
C type Wedge connectors(T-Type) suitable for Drake to Drake ACSR - 220 kV side
AC Distribution box (out door ):
AC distribution Box double front (out door) 24 terminal
1200 x 1350 x 600 mm , 2 I/C of 100 Amps MCCB 20 KA + 24 O/G MCB 16 Amps + 2 O / G of 100 A HRC fuse
LT Power Cable:
1.1 kV class PVC insulated Alluminium power cable(AC supply for lighting etc,.) 4 x 70 Sq mm with glands/lugs/ferrules
PVC insulated Copper Control Cable with Lugs / Ferrules.
1.1 KV class,Size of cable:
i) 19 Core 2.5 Sq.mm. Copper Control Cables
ii) 10 Core 2.5 Sq.mm. Copper Control Cables
iii) 4 Core 6.0 Sq.mm. Copper Control Cables
iv) 4 Core 2.5 Sq.mm. Copper Control Cables
v) 4 Core 4 Sq.mm. Copper Control Cables
vi) Copper PVC instrumentation cable armoured (screened cable) 1P X 1.5 Sq mm
PLCC equipments:
1. Wave Trap (suspension type) 0.5mH, 1250A, 31.5 kA, 50-150Hz and 100-500kHz
2. 40 W Carrier cabinet Single channel-40W
3. Coupling device MCD 80 LMU+LMDU
4. Protection coupler-4 command version
5. Co axial cable 75 Ohm
Station and Yard Lighting (Outdoor and Indoor) Lighting/ Lightning Masts.
(Refer TechnoCommercial Sheet for details)
Earth Mat formation :
iv) Supplying of Grounding of equipments by providing Cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm as per specification and ...
Total weight of the Towers (High Tensile Steel) excluding Bolt & Nuts
Total weight of the Towers (Mild Steel) excluding Bolt & Nuts
Total weight of the Bolts and Nuts
Tower Accessories:
a) Supplying and fixing GI angle iron 450X450x50 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower ...
b) Supplying and fixing of Barbed wire as per the specification.
c) Number Plates (1 No. per tower)
d) Danger Board (1 No. per tower)
e) Circuit Plates (1 No. per circuit)
f) Phase Plates (Set of 3 Nos.)
g) Earth Bonds300mm long
h) Earth Bonds 450mm long
i) Supplying of Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal.
(Also added Sl. no. SS12 of Station Supply portion)
iii.7/3.15 GI wire for ground conductor
Insulators strings suitable for DRAKE ACSR CONDUCTOR
i. Single Tension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X16nos. of 120kN Disc insulators
ii. Single Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X14nos. of 90kN Disc insulators
b. Porcelain long rod insulator string equivalent...
Insulators strings suitable for LYNX ACSR CONDUCTOR :
i. Single Tension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X8nos. of 90kN Disc insulators
ii .Single Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X7nos. of 90kN Disc insulators
b. Porcelain long rod insulator string equivalent t...
Insulator Hardwares for DRAKE ACSR CONDUCTOR:
i. Compression type Single Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X16 units of 120kN Disc insulators to s...
ii. Compression type Double Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X16 units of 120kN Disc insulators to suit DRAKE ACSR conductor
iii. Compression type Single Suspension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for:
a. 1X14 units of 90kN Disc insulators to suit DRAKE ACSR conductor
iv. Compression type Double Suspension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X14 units of 90kN Disc insulators to suit DRAKE ACSR conductor
Insulator Hardwares for LYNX ACSR CONDUCTOR:
i. Compression type Single Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X8 units of 90kN Disc insulators to suit...
ii. Compression type Double Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X8 units of 90kN Disc insulators to suit LYNX ACSR conductor
iii. Compression type Single Suspension (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X7units of 90kN Disc insulators to suit LYNX ACSR conductor
Accessories for Conductors:
a) Mid Span Compression Joints
b) Pre formed armour rods suitable for 220kV line
c) Repair sleeves
e) Vibration dampers
a) Mid Span Compression Joints
b) Pre formed armour rods
c) Repair sleeves
e) Vibration dampers
Hardwares & Accessories for Earthwire:
a) Mid Span Compression Joints
b) Repair sleeves
d) Single Tension clamps (bolted type)
e) Single Suspension clamps (bolted type)
OPGW Cable and its Tower accessories required for replacement of existing ground wire by OPGW & Joint box Assembly for 220kV lines .
A.OPGW Cable & its accessories :
a) 48Fibre (DWSM) OPGW fibre opt...
b) Suspension clamp assembly for 48 fibre OPGW
c) Tension fitting Assembly for 48fibre OPGW including all accessories for joint box(splicing location)
d) Tension Assembly for dead end for 48fibre OPGW
e) Tension Assembly -Double Tension pass through for 48fibre OPGW
f) Vibration dampers for 48fibre OPGW
g) Down lead clamp assembly for 48fibre OPGW
h) Joint box for 48fibre OPGW
FODP 48 F: Indoor type consisting of 2nos of rack mounted LIU (to be housed in FODP) with 24 ports each with FCPC coupling & pigtails
C. Fibre Optic approach Cable:
48 fibre(DWSM)-including installation hardware set for 48 fibre approach cable
CIRCUIT BREAKER :
SF-6 circuit breakers with rigid, bi-metallic terminal connector suitable for Drake ACSR with spring/semi pneumatic/pneumatic type operating mechanism with mounting structure complet...
ISOLATORS : Isolators including marshalling box,Rigid type terminal connectors with solid core cylindrical post insulators as per technical specifications.
220 kV, 1250 A, 40kA class double break Elec...
2) Upright mounting type without Earth switch LPH 8250 mm.
3)Upright mounting type without Earth switch LPH 5750 mm.
4)Underhung mounting type without earth switch
Note:Terminal connectors for Isolators :
Rigid type suitable for Drake ACSR- 48 Nos
Flexible type suitable for 63mm Al.pipe -12Nos
CURRENT TRANSFORMER :
Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with with marshalling KIOSK complete as per technic...
CAPACITIVE VOLTAGE TRANSFORMER :Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.
245kV class,CVTs 4400 PF, 220kV...
SURGE ARRESTOR : (Procelain housing) metal oxide gapless type with rigid bimetallic terminal connectors as per technical specifications..
198 kV, 10 KA, class -III, Heavy duty Metal oxide.
Control and Relay panel Complete SAS Compatible :
220 kV Line panel Type 2L( as per Annexure RPP1-SAS)
1)The Accuracy class of metering core of CTs and also trivector meter of control & ...
Integration charges with existing SAS system and gateway
Total Weight of Station structures & Mounting Structures (including Bolts & nuts) Also added Sl. no. SE12 of Station Erection portion)
(Refer TechnoCommercial Sheet for details)
Formation of Main/Cross bus with single Drake ACSR
Post Insulators-Cylindrical Solid Core Insulators as per IS : 5350, Part-II & III & as per technical specification:
For 220kV side -2 units/stack
Post Insulators of Rigid Bus
AC Distribution box (out door ):
AC distribution Box double front (out door) 24 terminal
1200 x 1350 x 600 mm , 2 I/C of 100 Amps MCCB 20 KA + 24 O/G MCB 16 Amps + 2 O / G of 100 A HRC fuse
LT Power Cable:
1.1 kV class PVC insulated Alluminium power cable(AC supply for lighting etc,.) 4 x 70 Sq mm with glands/lugs/ferrules
Laying of PVC insulated Copper Control Cable with Lugs / Ferrules 1.1kV class
(Refer TechnoCommercial Sheet for split up)
PLCC equipments:
1.Wave Trap (suspension type) 0.5mH, 1250A, 31.5 kA, 50-150Hz and 100-500kHz
2.40 W Carrier cabinet Single channel-40W
3.Coupling device MCD 80 LMU+LMDU
4.Co axial cable 75 Ohm
Releasing & Reerection of Lightning Mast-1 No.
Earth Mat formation :
i. Supplying and laying MS Flat 50 x 6 mm flat welding and applying ACB paint to welded portion as per approved drawing, specification and direction of Engineer in-charge of work...
ii.Supplying and Grounding of Equipment and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting ...
iii)Supplying and Providing 25mm dia M.S.Rod 1.05m long earthman spikes including heating, bending top 50mm overlap flattening and making spike edge at the ground level and welding the rod with ground...
iv) Erection portion of Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe usin...
Check Survey and Towers Spotting Towers- all types of Terrain:
a Survey using their own equipment including clearing for bushes tree branches upto 3mtr width etc.,
b Installing insulator strings complete with necessary Hardwares, Installing and stringing of conductor including fixing of conductor accessories, etc., (including all the conductors in each phase...
iii Ground wire for 110kV line
c Installing of OPGW cable along with associated hardware fittings and vibration dampers for Offline Condition.
d Tower Accessories required for replacement of existing ground wire by OPGW & Joint box Assembly
i. 48 fibre(DWSM)-including installation hardware set for 48 fibre approach cable
ii FODP 48 F: Indoor type consisting of 2nos of rack mounted LIU (to be housed in FODP) with 24 ports each with FCPC coupling & pigtails
Erection of Towers (excluding earthing )
1 The tenderers are required to quote the rates taking in to consideration the charges for sorting of towers parts, loading, unloading, stub setin...
3 Grounding of tower including cost of 40mm dia, 2.5mm thick, class C GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal including excavation charges.
Releasing of existing Drake, Lynx Conductor & Ground wire
i Releasing of existing Drake conductor - 220kV line portion
ii Releasing of existing Lynx conductor - 110kV line portion
iii Releasing of existing ground wires
a 220kV line portion
b 110kV line portion
Dismantling of existing 220kV & 110kV Towers
Dismantling of existing type tower parts without stubs including loading and unloading from site to store
a 220kV Tower :
220kV D/C - 16nos
b 110kV Tower :
110kV D/C - 8nos
a Payment will be made only for the actual weight of towers/conductor length/earth wire length which are dismantled. ...
Civil TB portion
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Civil Line portion
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Revised Commer doc WI872.pdf
Others - Revised Tender Document • 1.57 MB
section 8 drawings n other doc.zip
Others - drawings & others • 13.12 MB
Rev Section 11a Tech com WI872.xlsx
Others - Revised Techno Commercial sheets • 1.01 MB
Instruction to bidders dt 24.09.24.pdf
Others - Instruction to bidders • 0.44 MB
Detailed NIT WI872 dt 18.06.24.pdf
Others - Detailed NIT • 4.68 MB
Proceedings of Pre Bid Meeting dt 24.09.2024.pdf
Others - Prebid proceedings with clarifications • 1.80 MB
GIS_based_asset_mapping circular dt 23.02.2024.pdf
Others - GIS asset mapping circular • 0.69 MB
section 7 Tech spec.zip
Others - Technical Specification • 26.37 MB
Amendment I dt 24.09.24.pdf
Others - Revision of calendar of events • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .