SPECIAL REPAIR TO OMQ AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F for aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 x605 mm with aluminium main 'T' section of size 36.5x 23.5 x1.60 mm and cross T of size 23.5 x 23.8 x 1.60 mm with aluminium wall angle of size 36.5 x23.5 x1.60 mm with suspender complete all as specified and directed.

S&F for non asbestos fibre cement building board, 4 mm thick, fixed to aluminum frame work with screw as in ceiling in flat or sloping complete all as specified and directed.

Dismantling for plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F for Mild steel roof trusses (framed) Fe-410- W(Gde- E-250) quality- B, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Taking down chowkhats or frames with shutter not exceeding 1.5sq. m each complete all as specified and directed.

Taking down chowkhats or frames with shutter exceeding 1.5sq. m each but not exceeding 4.0 Sqm complete all as specified and directed.

S&F for 25 mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass complete all as specified and directed.

S&F for pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F for 35 mm thick IInd class hard wood ,plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F for 35 mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and avg aparture 1.4mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avg aparture 1.4mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and directed.

S&F for 5mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exec 0.5 Sqm each pane complete all as specified and directed.

S&F for 300mm aluminium alloy anodised sliding door bolts, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

-Ditto- as above item ser no 17.00 but 150 mm long complete all as specified and directed.

S&F for 100mm size of butt hinges, medium weight cold rolled mild steel complete for door etc with welding to steel chowkhats at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S&F for 125mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

M&L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surface of any description applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls build in cement mortar including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement incl two coats of 3 mm thick wall care putty complete all as specified and directed.

M&L for preperation of newly plastered surface applied two coats of oil bond distemper over a coat of primer complete all as specified and directed.

M&L for rendering 20 mm thick in two layers (12+8) ,on fair faces of stone masonry surfaces or concrete surfaces in cement mortar 1:4 finished even & smooth with out using extra cement including use of water proofing compound in outer layer complete all as specified and directed. Note- Water proofing compound use against this item measured and paid seperately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preperation of newly plastered external wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screeding in cement mortar 1:6 complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

M&L for Glazed cermaic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surface such as dados, skirting, risers to steps etc set and jointed neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for 100mm thick PCC type D2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for 50 mm thick sand cusioning complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring,etc, and making good, cutting not exc 10 cm girth in Brick walls complete all as specified and directed.

M&L for 10mm thick plaster in cement mortar 1:4 on RCC slab including using liquid WPC @ 200ml per bag of cement complete all as specified and directed.

M&L for preparation to RCC roof for water proofing with APP membrance of 3mm thick and weight not less than 3.5 kg/sqm including coating the surface with oil based bituminous primer @ 0.30 litre / sqm (conforming to IS: 3384-1986) and finally finished with one coat of bituminous aluminium paint @ 110 gms/sqm complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering ,and removing surplus soil to a distance n exc 50 m and making good surface in soft /loose soil complete all as specified and directed.

M&L for cement concrete 1:3:6 (Type C2 ( Using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161- 1979 grade St.-240 complete all as specified and directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 19mm thick HDHMR (High Density high moisture resistance) board for kitchen cabinet laminated white both side, fixed with gypsom black screws/nails as per manufacturer instructions complete all as specified and directed.

M&L for 19mm thick HDHMR (High Density high moisture resistance) board for kitchen cabinet laminated one side white and colured or textured other side, fixed with gypsom black screws/nails as per manufacturer instructionscomplete all as specified and directed.

S&F for stainless steel drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.

S&F for stainless steel telescopic drawer channel 20" long fixed with gypsom screw/nails complete all as specified and directed.

S&F for stainless steel kitchen cabinate basket 17'' x 20" fixed with gypsom screw/nails complete all as specified and directed.

S&F for stainless steel kitchen cabinate two shelves basket 17'' x 20" fixed with gypsom screw/nails complete all as specified and directed.

S&F for stainless steel nickel plated four hole soft close cabinet hinges with 105 degree opening fixed with screws complete all as specified and directed.

S&F for 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F for 15mm dia angle valves, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and direced.

M&L for providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M/S RK Trading (BID ID -3361779)

HIND CONSTRUCTION (BID ID -3359468)

FREEZCON (BID ID -3360276)

M/S D G ENTERPRISE (BID ID -3361394)

M/S S.A.Electrics (BID ID -3360287)

M/s Sashi Enterprise (BID ID -3361682)