DEMOLITION AND RECONSTRUCTION OF OLD MD ACCN (PHASE-II))

Amount

SCHEDULE `A' PART - I (Building Works) is not prepriced by MES and prepriced rates indicates 0.00 under column 5 signifies this fact only.

Construction of Offrs Md. Accn (Block of 4 Qtrs G+1) including car garage, servant Qtrs and steel ladder with permanent specification complete all as specified, shown on drawings and as directed.

Construction of JCO Md. Accn (Block of 12 Qtrs G+2) with permanent specifications complete all as specified, shown on drawings and as directed.

Construction of OR's Md. Accn (Block of 6 Qtrs G+2) (including scooter shed) with permanent specification complete all as specified, shown on drawings and as directed.

Construction of Car Garage (Block of 6 Cars) with permanent specification complete all as specified, shown on drawings and as directed.

NOTE: Schedule ‘A’ Part II to XI under Ser No 2.01 to 2.10 are Prepriced by MES.

Lump sum price worked out by the Contractor for “SITE CLEARANCE AND EARTH WORK” as listed in Schedule ‘A’ Part II

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part III

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part IV

Lump sum price worked out by the Contractor for "SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part V

Lump sum price worked out by the Contractor for “AREA DRAINAGE " as listed in Schedule ‘A’ Part VI

Lump sum price worked out by the Contractor for “ROAD, PATH AND CULVERT ” as listed in Schedule ‘A’ Part- VII

Lump sum price worked out by the Contractor for “FENCING AND GATE ” as listed in Schedule ‘A’ Part-VIII

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - IX

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - X

Lump sum price worked out by the Contractor for "DEMOLITION AND DISMANTLING” as listed in Schedule ‘A’ Part XI

SCHEDULE `A' PART - XIII MISC ITEMS (B/R & E/M) is not prepriced by MES and prepriced rates indicate 0.00 under column 5 signifie this fact only.

INTERNAL ELECTRIFICATION

S&F LED bulb, 09 Watt, 230 Volt retrofit type complete all as specified and as directed.

S&F LED security light fitting 15 Watt, input 110 to 220 Volts as per IP 65 luminaries comprsing of rectangular shape, high pressure die cast aluminium housing with weather proof gaskets for lamp and driver compartment with GI pipe 25 mm dia light grade bend to shape including necessary fixing arrengement complete all as specified and as directed.

S&F MCB SPN 40 Amps, C curve type 10 KA, 240 Volts complete all as specified and as directed.

S&F MCB SPN 20 Amps, C curve type 10 KA, 240 Volts complete all as specified and as directed.

S&F MCB SPN 6 to 32 Amps, C Curve type 10 KA breaking capacity 240 Volts complete complete all as specified and as directed.

S&F for TV socket with cable grip Modular type, 1 module complete all specified and as directed.

S&F for Telephone socket with shutter-twin RJ 11 Modular type, 1 module complete all as specified and as directed.nd as directed.

Design, manufacturing, supplying and installing in correct aligned position making proper connection testing and commissioning of Energy Meter Panel (for accommodate of 12 Nos single phase Energy Meters) suitable for 415 V, Three phase, 4 wire, 50Hz power distributor system. The panel shall be indoor IP-42 rating, free standing, floor mounted, sheet metal clad, cubical, dust and vermin proof type, compartmentalised design fabricated out of 2 mm CRCA sheet complete. Adequite size of incoming and outing going feeders cable alley proper locking arrangement, transparant glass for checking of reading, painting with two coats of synthetic enamel paint over a coat of red oxide primer, earthing, numbering danger plate including necessary earth and PCC work for erection of panel complete all as specified and as directed of the followings:- (i) Aluminium Bus Bars 4 Nos 200 Amps capacity complete heat shrinkable PVC sleeve (ii) Incomer MCCB 100 Amps, 4 pole 16 KA-01 No (iii) MCB SPN 20 Amps, 230 Volts 'C' curve 10 KA capacity-12 Nos (iv) MCB SPN 10 Amps, 230 Volts 'C' curve 10 KV capacity-01 No (v) Internal wiring with 06 Sqmm PVC insulated unsheathed stranded copper conductor. (vi) Volt meter 500 volt, Amp meter 0-200 Amps and LED indicator lamp complete. Note : Rate for Energy meter will be measured and paid seperatey under respective item.

Design, manufacturing, supplying and installing in correct aligned position making proper connection testing and commissioning of Energy Meter Panel (for accommodate of 06 Nos single phase Energy Meters) suitable for 415 V, Three phase, 4 wire, 50Hz power distributor system. The panel shall be indoor IP-42 rating, free standing, floor mounted, sheet metal clad, cubical, dust and vermin proof type, compartmentalised design fabricated out of 2 mm CRCA sheet complete. Adequite size of incoming and outing going feeders cable alley proper locking arrangement, transparant glass for checking of reading, painting with two coats of synthetic enamel paint over a coat of red oxide primer, earthing, numbering danger plate including necessary earth and PCC work for erection of panel complete all as specified and as directed of the followings:- (i) Aluminium Bus Bars 4 Nos 100 Amps capacity complete heat shrinkable PVC sleeve (ii) Incomer MCCB 63 Amps, 4 pole 16 KA-01 No (iii) MCB SPN 32 Amps, 230 Volts 'C' curve 10 KA capacity-06 Nos (iv) MCB SPN 10 Amps, 230 Volts 'C' curve 10 KV capacity-01 No (v) Internal wiring with 06 Sqmm PVC insulated unsheathed stranded copper conductor. (vi) Volt meter 500 volt, Amp meter 0-100 Amps and LED indicator lamp complete. Note : Rate for Energy meter will be measured and paid seperatey under respective item.

Design, manufacturing, supplying and installing in correct aligned position making proper connection testing and commissioning of Energy Meter Panel (for accommodate of 04 Nos single phase Energy Meters) suitable for 415 V, Three phase, 4 wire, 50Hz power distributor system. The panel shall be indoor IP-42 rating, free standing, floor mounted, sheet metal clad, cubical, dust and vermin proof type, compartmentalised design fabricated out of 2 mm CRCA sheet complete. Adequite size of incoming and outing going feeders cable alley proper locking arrangement, transparant glass for checking of reading, painting with two coats of synthetic enamel paint over a coat of red oxide primer, earthing, numbering danger plate including necessary earth and PCC work for erection of panel complete all as specified and as directed of the followings:- (i) Aluminium Bus Bars 4 Nos 200 Amps capacity complete heat shrinkable PVC sleeve (ii) Incomer MCCB 125 Amps, 4 pole 25 KA-01 No (iii) MCB SPN 40 Amps, 415 Volts 'C' curve 10 KA capacity-04 Nos (iv) MCB SPN 10 Amps, 230 Volts 'C' curve 10 KV capacity-01 No (v) Internal wiring with 10 Sqmm PVC insulated unsheathed stranded copper conductor. (vi) Volt meter 500 volt, Amp meter 0-200 Amps and LED indicator lamp complete. Note : Rate for Energy meter will be measured and paid seperatey under respective item.

Supplying, installation, testing & commissioning of 1 Phase, 2 Wire, single Source, Pre-paid Energy Meters, BIS 15884 Marked to fixed in existing meter box with pre paymentcapacitive touch key pad, Bluetooth based Digital having current range 10-60Amp, 240V, acucuracy class 1.0 along with Parallel home display split unit, with inbuilt load control switch, containing provision forTOD & RTC, single source registration with resspect inbuilt feature sense the DG Mode through PLSI, dual source registration with respect to Grid, capable to define 4 tariff slabs, happy hour & holiday defination all as specified and directed. The meters shall be compabile with existing server for metering installed at A Subroto park.

S&F electric water heater, vertical type, storage type steel body with copper inner tank and heating element upto 2KW, capacity of water heater 25 litre, BEE, 5 Star rating complete with all accessories such as safety valve, thermostate, NRV, flexible hot and cold water connection pipe with two Nos union suitable for 15mm bore pipe etc complete all as specified and as directed.

EXTERNAL WATER SUPPLY

Supply, laying, jointing and testing,100mm bore, Ductile Iron pipe, class 'K7‘ with spigot and socketed ends, centrifugally cast conforming to relevant IS, suitable for using tyton joints laid in trenches / path/ duct/ road/ wall etc including fixing with connected CI/DI/GI fitting accessories and along with existing branch pipeline connections and all fitting work etc complete all as specified and as directed. Note : Earth work and fittings shall be measured and paid separately.

M&L for boring of holes under road, pavement, hard standing, taxi track, runway crossing point etc. of any type and size, by trenchless technology using ultra sound technique or by manualy boring method of hole work for passing 100 mm to 200 mm dia bore CI/DI/GI pipe line system complete including providing of HDPE pipe of 250 mm dia suitable for 0.4 mpa working pressure including making arrangement for necessary T&P as required at site complete all as specified and as directed.

M&L for construction of brick masonry valve pit of size 90cmx90cmx90cm ( internal dimensions of chamber, depth to be reconed from the top of PCC in foundation to top of MS cover) with mild steel sheet cover 3.15 mm thick including angle iron frame of size 40x40x6mm with locking & fixing arrangement duly painted with 2 coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in cement mortar 1:4 and all internal and external wall surfaces of pit shall be plastered with 15mm thick in cement mortar (1:4), necessary excavation and earthwork in any type of soil, returning filling in, disposal of surplus soil to a distance not exceeding 50 mtrs and including foundation concrete (1:4:8) type D-2 using 40mm graded stone aggregate, and cement concrete(1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping etc. complete all as specified and as directed.

All as per ser item No 4.03 above but of size 60cm x 60cm x 60cm complete.

EXTERNAL ELECTRIFICATION

M&L for boring holes across the road / plinth / hard standing by trenchless technology method suitable for inserting 80/100mm bore pipe including HDPE pipe of 150mm dia bore suitable for 0.5 mpa working pressure for cable passing without damaging road / plinth/ floor complete all as specified and as directed.

Supply fixing, installtion and commissioning of out door compatment type LT feeder pillar powder coated factory made CPRI approved of suitable size dust, weather and vermin proof made of 3.15 mm CRCA mild steel sheet aulminium bus bar 250 Amps TPN incl provision of cable entries with glands locking arrangement including angle iron frame and legs upto 30cm long using 60x60x6mm size MS angle iron fixed in floor in PCC 1:4:8 type D2 base of appropriate size includng necessary excavation earth work complete all as specified and as directed including comprising of followings (For OR's Qtrs):- (a) Incoming:- (i} MCCB 200 Amps 4 pole 25 KA -01 No (ii) Digital volt meter 0 to 500 volt -01 No CL 0.5 (iii} Digital Amp meter 0 to 200 Amps -01 No Accuracy Class 0.50 (iv) RYB LED indicator set -01 No (b) Outgoing:- (i} MCB TPN 32 Amps 4 pole 10 KA 415 Volt =09 Nos C- Series

Supply fixing, installtion and commissioning of out door compatment type LT feeder pillar powder coated factory made CPRI approved of suitable size dust, weather and vermin proof made of 3.15 mm CRCA mild steel sheet aulminium bus bar 150 Amps TPN incl provision of cable entries with glands locking arrangement including angle iron frame and legs upto 30cm long using 60x60x6mm size MS angle iron fixed in floor in PCC 1:4:8 type D2 base of appropriate size includng necessary excavation earth work complete all as specified and as directed including comprising of followings (For JCO's Qtrs):- (a) Incoming:- (i} MCCB 100 Amps 4 pole 10 KA -01 No (ii) Digital volt meter 0 to 500 volt -01 No CL 0.5 (iii} Digital Amp meter 0 to 100 Amps -01 No Accuracy Class 0.50 (iv) RYB LED indicator set -01 No (b) Outgoing:- (i} MCB TPN 32 Amps 4 pole 10 KA 415 Volt =03 Nos C- Series

Supply fixing, installtion and commissioning of out door compatment type LT feeder pillar powder coated factory made CPRI approved of suitable size dust, weather and vermin proof made of 3.15 mm CRCA mild steel sheet aulminium bus bar 100 Amps TPN incl provision of cable entries with glands locking arrangement including angle iron frame and legs upto 30cm long using 60x60x6mm size MS angle iron fixed in floor in PCC 1:4:8 type D2 base of appropriate size includng necessary excavation earth work complete all as specified and as directed including comprising of followings (For Offrs Qtrs) :- (a) Incoming:- (i} MCB TPN 63 Amps 10 KA -01 No C series (ii) Digital volt meter 0 to 500 volt -01 No CL 0.5 (iii} Digital Amp meter 0 to 100 Amps -01 No Accuracy Class 0.50 (iv) RYB LED indicator set -01 No

M&L for bracket made out of GI pipe light grade 40 mm dia 1.5 mtr long duly welded with MS pipe capacity of 100mm dia duly closed with MS round cap top, 30 cm long with holes, nuts, bolts and fixing on top of pole complete all as specified and as directed.

S&F cable jointing kit for 1.1 KV (Earthed grade cable for indoor trmination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 25 sqmm to 50 mm complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, with Thermal Magnetic release type, 200 Amps with breaking capacity Ics=Icu (1 Sec) 16 KA complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, with Thermal Magnetic release type, 100 Amps with breaking capacity Ics=Icu (1 Sec) 10 KA complete all as specified and as directed.

S&F MCB TPN, 415 V, 63 Amps with breaking capacity Ics=Icu (1 Sec) 10 KA C-series complete all as specified and as directed.

S&F PVC copper cable 1.5 sqmm 2 core with earth wire 1.5 Sqmm for connection of LED street light on ploe from the junction box complete all as specified and as directed.

S&F roadway LED light in versatile pressure die cast aluminium road way luminaire with high power LED Protection of 35/40 Watts including fixing arrangements such as clamps, bolts, nuts and brackets etc. complete all as specified and as directed.

S&F street light junction box insuleted and made out of environment friendly, recycleable, UV resistant, halogen and silicon free, polycarbonate with glass fiber reenfocement of size in mm should not be less rhan 205x255x112. The box shall be rated for degree of Ingress Protection IP-66/67 including all fixing material as required complete all as specified and as directed.

ROAD PATH AND CULVERT

M&L, painting 2mm thick of thermoplastic fluorecent paint colour white or golden or any other shade, conforming to BS standard 3262 with 20 % glass beads(inter mixed) applied hot with automatic (commercial) machine drive in strips after preparation of surfaces as per manufacturer's instructions, making lines, broken lines/dashes, arrows etc on roads and olher like surfaces exceeding 10 cm but not exc 30cm in width or girth complete all as specified and as directed.

M&L for Concrete bed to drain pipes, 450mm dia pine line including packing under, and hunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and as directed.

INTERNAL WATER SUPPLY

S&F brass CP mixer (Swan neck) for WHB for mixing hot & cold water screwed down suitable for 15mm bore of pipe complete all as specified and as directed.

DEMOLITION AND DISMANTLING

Taking down bib tap/stop cock/shower rose/Gate/globe valves any type and size complete all as specified and as directed.

Taking down old flushing cistern of any type and capacity including connections and fittings all as specified and as directed.

Dismantaling mud phuska from roofs of any thickness and removing from site complete all as specified and as directed.

Taking out old unserviceable gate / glove valve complete accessories from existing pipe line of size 40/50 mm bore complete all as specified and as directed.

Taking out old unserviceable gate / glove valve complete accessories from existing pipe line of size 25 mm bore complete all as specified and as directed.

Taking out old unserviceable GI/CI fittings from pipe line of size 80/100 mm bore complete all as specified and as directed.

Taking out of old unserviciable sluice valve including its accessories from existing pipe line of size 150 mm bore complete all as specified and as directed.

Taking out of old unserviciable sluice valve including its accessories from existing pipe line of size 80/100 mm bore complete all as specified and as directed.

Demolition of valve pit of any type/size including taking out of old broken unserviceable accessories from valve pit and its connection and fixing accessories including excavation work complete all as specified and as directed.

Taking out old unserviceable LT under ground cable of size upto 25 Sqmm and removing from site complete all as specified and as directed.

Taking out old unserviceable LT under ground cable of size 35 Sqmm to 95 Sqmm and removing from site complete all as specified and as directed.

Taking out old unserviceable LT under ground cable of size above 95 Sqmm to 185 Sqmm and removing from site complete all as specified and as directed.

Taking out old unserviceable GI pipe of any size and type complete all as specified and as directed.

Dismantling existing old unserviceable main switch, DB SPN/TPN, etc from the existing position and removing from site complete all as specified and as directed.

Taking down Ceiling/Exhaust fan of any size, sealing cable end, dismantling blades and removing/handing over fan and blades to E/M store complete all as specified and as directed.

Disconnection and taking down old unserviceable existing light fitting any type and removing from site complete all as specified and as directed.

Disconnection and taking out old unserviceable submain wiring any description sealing cable end and removing from site complete all as specified and as directed.

Disconnection and taking down fan regulator any description, sealing cable ends and removing from site complete all as specified and as directed.

Taking down electric geyser of capacity 25 Ltr including connection pipe and removing the same from site complete all as specified and as directed.

Taking down electric meter of any type and size including removing from site complete all as specified and as directed

Taking out old unserviceable GI earthing of any type from existing position including necessary excavation where required and removing from site complete all as specified and as directed

NAND LAL PURI AND SONS PRIVATE LIMITED

MASTER CONSTRUCTION CO

SOM BUILDERS

A.V BUILDERS

ATUL CONSTRUCTION CO.