REPAIRS AND POLISHING TO WOODEN FURNITURE AT CHAKABAMA MILITARY STATION UNDER AGE(I) ZAKHAMA

Amount

CHAIR DINING FD-279

Removing the existing unserviceable / broken plastic cane, supplying and canning with new plastic cane 2 mm wide half round, oval type and 0.35 mm thick in white colour and border shall be canned with 3 mm wide and 0.4 mm thick, canning to be done as per Godrej Pattern complete all as directed by Engineer-in-charge including polishing of visible surfaces with one coat of french polish complete all as specified and shown in drawing.

Removing the existing unserviceable/broken front/rear leg and supplying and fixing 1st class hard wood (teak wood) front/rear leg with rubber shoes duly polished with one coat of french polish complete as specified and shown on drawing.

Removing the existing unserviceable/broken long/short rail of chair dining and supplying and fixing 1st class hard wood (teak wood) new long/short rail duly polished with two coat of french polish complete as specified and shown on drawing.

Removing the existing unserviceable stiffeners and Supply & fix stiffeners for chairs made out of 1st class hard wood ( teak wood) with two coat of french polish complete as specified and shown on drawing.

SOFA SET SINGLE SEATER (FD-281)

M&L for polishing with one coat of french polish on exposed surfeces of sofa set single seater,complete all as directed and shown on drawing.

TABLE DINING 6 PERSONS FD-273

Removing the unserviceable /damaged top of table dining and supply and fixing new top made of 18 mm thick pre-laminated particle board exterior grade with one side decorative and other side balancing white including 2nd class hardwood beading all around including polishing of visible surfaces with two coat of french polish complete all as specified and shown on drawing.

CHAIR EASY FD-229

Removing the existing unserviceable / broken plastic cane, supplying and canning with new plastic cane 2 mm wide half round, oval type and 0.35 mm thick in white colour and border shall be canned with 3 mm wide and 0.4 mm thick, canning to be done as per Godrej Pattern complete all as directed including polishing of visible surfaces with one coat of french polish complete all as specified and shown in drawing.

Removing the existing unserviceable / broken front/rear leg and supplying and fixing 1st class hard wood (teak wood) front/rear leg including polishing with two coat of french polish complete all as specified and shown on drawing (Each leg measured separately).

Repair/replacement of UNSV Hand Rest and refixing with new hand rest as per existing shape and size 60x25mm including one coat of french polish complete all as specified or as directed (Each arms rest measured separately).

PEG TABLE FD-277

Removing existing unserviceable tops from Table Centre and supply and fixing with new top made out of pre-laminated particle board 18 mm thick of size 450x200mm, teak face on one side and 4mm thick 2nd class hard wood beading provided around the top as per existing shape including polishing of visible surfaces with two coat of French polish complete all as specified and shown on drawing.

TABLE CENTRE FD-235

Removing existing unserviceable tops from Table Centre and supply and fixing with new top made out of pre-laminated particle board 18 mm thick of size 900x450mm, teak face on one side and 4mm thick 2nd class hard wood beading provided around the top as per existing shape including polishing of visible surfaces with two coat of French polish complete all as specified and shown on drawing.

CHAIR WRITING FD- 280

Removing the existing unserviceable / broken plastic cane, supplying and canning with new plastic cane 2 mm wide half round, oval type and 0.35 mm thick in white colour and border shall be canned with 3 mm wide and 0.4 mm thick, canning to be done as per Godrej Pattern complete all as directed including polishing of visible surfaces with one coat of french polish complete all as specified and shown in drawing.

Removing existing unserviceable short rail of chair writing and supply and fix of new short rail of size 30x65 mm duly polished with two coat of french polish complete as specified and shown on drawing.

Removing existing unserviceable legs of chair writing and supply and fix new front legs & rear legs duly polished with two coat french polish complete as specified and shown on drawing.

Removing of unserviceable Hand Rest and refixing with new hand rest as per existing shape of size 60x25mm duly well polished with two coat of french polish complete all as specified or as directed by the Engr-in-Charge (Each arms rest measured separately)

Removing of unserviceable stiffner of chair writing and supply and fix new stiffener of size 25x20mm duly polished with french polish complete as specified and shown on drawing.

REPAIR TO BED HARD WITH PLYWOOD TOP FD-246

Removing existing unserviceable plywood of Bed hard Plytop and Supply and fixing 12mm thick BWR grade plywood and polishing of entire wooden surface with french polish all as specified and as directed.

REPAIR TOTABLE DRESSING LADIES FD-251 Taking out the following old/unsv componenents of table dressing ladies and S&F new components as per shape and size of original components complete all as directed and shown on drawing.

Looking mirror of size 1220mmx365mm and 5mm thick complete all as directed and shown on drawing. Make: Atul/Modi Guard/Golden fish.

Frame and back member of the mirror made out of well seasoned 1st class hard wood including back side 6mm thick commercial ply wood BWR Gde, complete all as directed and shown on drawing.

Legs made out of well seasoned 1st class hard wood , complete all as directed and shown on drawing.

Top of size 900mmx325mm made out of 18mm thick particle board and providing 4mm thick teakwood beading on front , complete all as directed and shown on drawing.

Drawers made out of 12mm thick planks and providing CP knobs of size 40mm , complete all as directed and shown on drawing.

Glass panes shutters 5mm thick alongwith aluminium channel , complete all as directed and shown on drawing.

M&L for prepartion of wooden surfaces and polishing of two coats of french polish of best quality to the table dressing ladies, complete all as specified and as directed.

REPAIR TOTABLE DRESSING GENTS FD-230 Taking out the following old/unsv componenents of table dressing ladies and S&F new components as per shape and size of original components complete all as directed and shown on drawing.

Looking mirror of size 760mmx380mm and 5mm thick complete all as directed and shown on drawing. Make: Atul/Modi Guard/Golden fish.

Frame and back member of the mirror made out of well seasoned 1st class hard wood including back side 6mm thick commercial ply wood BWR Gde, complete all as directed and shown on drawing.

Drawers made out of 12mm thick planks and providing CP knobs of size 40mm , complete all as directed and shown on drawing.

Top made out of 12mm thick particle board and providing 4mm thick teakwood beading on front , complete all as directed and shown on drawing.

Bottom made out of 12mm thick pre-laminated particle board and providing 4mm thick teakwood beading on front , complete all as directed and shown on drawing.

M&L for prepartion of wooden surfaces and polishing of two coats of french polish of best quality to the table dressing ladies, complete all as specified and as directed.

SOFA SET OF FIVE SEATER (FD-281/373/TP)

M&L for polishing with one coat of french polish on exposed surfeces of five seater sofa complete all as directed and shown on drawing.

Replacement of cushion including existing tapestry cloth of sofa set five seater/Single seater, seat and back and supply & fix new tapestry cloth with New cushion of size 560 x 535 x 100mm thick, 32 mm density duly stitched of seat and back of sofa set five/single seater complete all as directed and shown on drawing.

Rameshwar Prasad (BID ID -3329227)