ADDN /ALTN TO CERTAIN SMQs AT AF STN BARNALA UNDER GE (AF) HALWARA

Amount

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (square/rectangular) in floor etc set joints in neat cement slurry and pointed in white or coloured cement to match the floor incl 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per item No 3 above but as in skirting /dado with 10 mm thick rendering in cement mortar 1:4.

M&L 25mm thick PCC(1:2:4) type B1,(using 20mm graded stone aggregate) as in sub base of floor tiles, complete all as specified and directed.

M&L joint less Glazed ceramic coloured tiles in vertical surface 300x200x7mm / 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface incl 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor aprov etc, laid, bedded and pointed in any mortar and including removal of debrish & rubbish from the site, complete all as specified and directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in cooking plateform and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust making holes in RCC shelves suitable for gas pipe, complete all as specified and directed.

M&L for rounding to edges of stones slabs one edge ,such as in steps, cooking plateform and other similar works 18-20mm thick, complete all as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore, complete all as as specified and directed.

S&F Tube 'medium grade' galavanised with all fitting and fixed complete to walls and ceiling etc 15mm bore, complete all as as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, waste pipe, washers and waste incl cast iron cantilever brackets connection union etc over all size 915mmX460mm with bowl size 410mmX330mmX160mm, complete all as specified and directed.

Taking down shutters and refixing in same opening of any description exceeding 1.00 sqm but not exc 2.00 sqm each, complete all as specified and directed.

S&F in repair bib taps long body, C P cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed, complete all as specified and directed.

S&F in repair Pillar tap fancy type cast copper alloy, with capstan head chromium plated, screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm, complete all as specified and directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L 15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC finished even & smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately.

M&L 12mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed.

M&L 5mm thick cement plastering in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered suraces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion over a coat of primer and wall care putty on new plaster surfaces, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coat of white wash on Wall, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coat of white wash on ceiling surfaces, complete all as specified and directed.

M&L for Complete removal of old existing treatment and applying one coat white wash on ceiling surfaces, complete all as specified and as directed.

M&L for complete removal of old existing treatment and applying two coat white wash on wall surfaces, complete all as specified and as directed.

M&L Brick work with sub class ‘B’ Bricks straight or curved on plan exc 6m mean radius and built in cement mortar in 1:6, complete all as specified and directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each, complete all as specified and directed.

All as per item No 27 but area exc 1.5 Sqm but not exc 4 Sqm each.

Taking down shutters of any description esceeding 1.00 sqm but not exc 2.00 sqm each, complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1, complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1, complete all as specified and directed.

S & F factory made Plain, framed, panelled shutters, 35mm thick, 2nd class hard wood , plain, framed, panelled shutters (any number of panels), with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.

Supply and fixing for 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a); supplied and fixed to chowkats, complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately .

S & F factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of 12 mm dia square guard bars in 150mm spacing c/c including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Glazing & Wire cloth shall be measured and paid separately. (ii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

M&L for prepration of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of primer or red oxide on new steel surface of girth over 10 cm, complete all as specified and directed.

M&L for preparation of new wooden surfaves and applying 2 coats of synthetic enamel paint over a coat of pink primer on new wooden surface of girth over 10 cm, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed, complete all as specified and directed.

S&F in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed, complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F Aluminium anodised Cast type handle of 150mm size, complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F PVC door frame of size 50x47 mm made out of 5mm wood grain printed PVC sheet, reinforced with MS square tube, complete all as specified and directed.

S&F 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and wood grain colour PVC sheet for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of wood grain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings, complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepred for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running, also fasting and fixing complete. Fe 290 (Gde E-165), complete all as specified and directed.

S&F in repairs 18/19 mm thick Veneered particle board, interior grade, solid core, with decorative veneer on both face, general pupose type fixed with screws to timber frame work, complete all as specified and directed.

M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block board or veneered particle board fixed with nails, complete all as specified and directed.

S&F 100mm Hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F of 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqmin each pan, complete all as specified and directed.

S&F floor door stopper of aluminium alloy long anodized with hard drawn steel spring fixed length of cover plate 15 cm long, complete all as specified and directed.

S&F in repairs 25 mm dia Harison rails , mild steel , chromium plated with fixing fancy type brass cp brackets and side knobs, stops, rollers etc as in curtain rod and fixed to wall, complete all as specified and directed.

S & F stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete as per sample kept in GE’s office suitable for officers quarters, complete all as specified and directed.

Demolition of cement conrcete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roof, complete all as specified and directed.

Roughening surfaces of old/concrete floor by backing sweeping clean with iron brush and washing down with water etc, complete all as specified and directed

M&L 50mm thick PCC(1:2:4) type B1,(using 20mm graded stone aggregate) finish even and smooth with using extra cement, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, padding concrete or in roof kerbs using 20 mm garded stone aggregate for roofs, complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 3% by weight of cement or as per manufacturers instructions, complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately.

Supply only Integral waterproofing compound, complete all as specified and directed.

M&L for preparation of roof top surfaces providing and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced having sun Reflectivity index (SR) of 106 on top of concrete roof surfaces all cracks upto 3mm at corner joints channel and parapets should be treated with crack seal . Applying three coats including one coat of primer of Shali urethene BTD/Sikalastic 560/smart care damp proof ultra having coverage @ min 0.75Kg/Sqm and dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2Kg/sqm in two coats for maintaining minimum dry film thickness 1.50mm and elongation at break of free film of approx 350%. The material shall be applied with brush or rooller, complete all as specified and directed. Note :6 hrs interval between two coat will be maintain. All auxillary and accessories involved during application should be supplied by single manufacturer as part of system . (i)The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing.

M&L for 75 mm thick plain cement concrete 1:4:8, type D-2, (40mm graded stone aggreagte ) as in plinth protection etc, complete all as specified and directed.

M&L for Welding in repair of hinges to fixing door and window including connecting neccesary items and refixing in same position finishing with existing and neccesary work, complete all as specified and directed.

M&L for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smaoke soot, mould, moss and efflorescent salts trading oil and greasy spots; filling holes, crakes with wall care putty and applying one coat of distemper oil emulsion . (White/ Tinted/ Ivory) on the surface of walls, complete all as specified and directed.

S&F in repair PVC syphon kit with handle for PVC low level flushing cistern capacity 10 ltrs, complete all as specified and directed.

S&F PVC lid / cover for any size of PVC tank, complete all as specified and directed.

S&F in repairs WHB in vitreous white chinaware of 550x400 mm size including CI/MS brackets ,45cm long PVC connection. PVC waste pipe , waste coupling of suitable size / length and all connection, complete all as specified and directed..

S K BANSAL AND CO. (BID ID -3395408)

m/s k.k. construction co. (BID ID -3395760)

SANGAM ENGINEERS (BID ID -3394667)

CHOUDHARY ENTERPRISES (BID ID -3404293)

VISHAV CONSTRUCTIONS (BID ID -3403931)