Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.0 Cr
EMD Value
₹1.5 L
Closing Date
14 May 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
EE PRED BAGALKOTE
Improvements to road from Hireshellikeri to Ganganabudihala in Bagalkote taluk of Bagalkote Dist
RDPR/2024-25/RD/WORK_INDENT12261/CALL-2
RDPR/2024-25/RD/WORK_INDENT12261/CALL-2
Open
Roads
Two Tender Document System(Two Cover)
RDPR Division Office Bagalakote
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Contractor should upload contract KPWD/PRED Class-I & above Registration Certificate
PAN & GST Certificate
To qualify for award of this contract, each Tenderer in his name should have in the last five years 2019-20, 2020-21, 2021-22 2022-23 and 2023-24 Satisfactorily completed, satisfactory completion as prime contractor, for at least one similar work such as Construction of Road work of value not less than Rs.50.03 Lakhs, Certificate to this, from a competent authority not below the rank of Executive Engineer should be enclosed. The work done certificate should mention the details of work executed and the date of commencement & date of completion of the work.Workdone with indent No
Tenderer must have completed physical work done as prescribed in bid document KW-4 Executed in any year the following 80 Percentage quantities of work during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ 1.GSB-1055.63 Cum2.Subgrade Murrum/Earthen Shoulders 2322.40 CUM3.WBM Grade-I & II- 1266.77 CUM 4.Asphalt -8445.00 sqm
To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover is not less than amount put tender in all classes of civil engineering construction works only of Rs. 200.14 Lakhs. with UDIN No. certified by Authorized charted Accountant.-turnover shall not be less than two times of amount put to tender otherwise bid will be directly disqualified
Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.50.03 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. LOC issued by such a banks should be of UNCONDITIONAL
Assessed available tender capacity (A x N x1.5-B) where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to ------- price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next.......years (period of completion of the works for which Tenders are invited) Note- a)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Postal Address with contact number
₹2,510
₹1.5 L
25 Apr 2025
25 Apr 2025
16 May 2025
6 May 2025
5 May 2025
Improvements to road from Hireshellikeri to Ganganabudihala
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Surface Drains in Soil Construction of unlined surface drains of average cross sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embank...
Compacting original ground supporting embankment- Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of...
Construction of Subgrade and Earthen Shoulders-Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading,...
GSB By Mix in Place Method-Granular Sub-base with well graded material (table 400.1) Grading-IlI By Mix-in place method. Granular Sub-base with well graded material (table 400.1a) By Mix-in place meth...
WBM Grading I (63mm to 45 mm)-Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing...
WBM Grading II (53mm to 22.4mm)-Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packi...
Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....
Tack coat on Granular surface treated with primer-Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared bituminous...
Mix Seal Surfacing-Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using VG-3...
Kilometre Stone-Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary Kilometer Stone(precast)
Kilometre Stone-Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200m stone(precast)
Studs-Providing and Fixing Aluminium studs 100x100 mm fitted with lense reflectors
Road Marking-Road Marking with Hot Applied Thermoplastic Compound with eflectorising glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick includin...
Providing and Fixing 'Logo Board ' of PMGSY at Starting Point-Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
12261 KW 4 5054.docx
Tender Document • 0.13 MB
LOC DETAILS.jpeg
Tender Document • 0.07 MB
12261 CALL-2 KW-4 5054.docx
Tender Document • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .