PROVN OF 08 PASSANGER LIFT AT BLDG NO P-18 JNE AREA UNDER GE (NORTH) UDHAMPUR

Supply, install, testing & commissioning 8 Passengers Lift with machine room suitable to serve G+3 upper floors with AC variable voltage & variable frequency (VVVF drive) drive complete with all standard accessories conforming to IS : 17900, simplex collective selective automatic & manual dual controlled operation with/without attendant, automatic centre opening doors with VVVF door drive (electric motor driven mechanism), sliding glass vandalproof doors and vandalproof textured cabin opeing size not less than (900 x 2100 mm) automatic rescue device (ARD) system with audio announcer equipped 3 way intercom, complete all as specified below and as directed:- Note :- contractor/OEM Rep requested to visit the site before quoting the rates.

Srl item 01 Contd … NOTE :- Lift OEM to submit detailed specification/design parameters, construction drg of all components of lifts as per IS-14665 and as per latest ammendemend. Type of Lifts: Passenger No. of Passengers & Load capacity: 8 Nos. & 540 Kgs Speed: 1 mtr/sec with single speed motor Stop & openings- as per structural drawing. Travel height- as per structural drawing. Elevator Grouping- Simplex Full Collective Control Well dimension - as per structural drawing. Head room height - as per structural drawing. Pit height - as per structural drawing. Car dimensions - as per structural drawing. Door dimensions - as per structural drawing. Car Finishes:- Car design-SS silver brushed Car Panel Finish-SS Vandalproof Textured Car Wall Material Thickness(mm) - As per Latest IS norms Handrail-Round Bend Handrail Silver brushed stainless steel (ST4) at Rear Wall Ceiling & Lighting-Integrated roof HS80 Stainless Steel Hue spot LED light Flooring-20 mm Customer provide Granite Stone Car skirting material: Stainless steel Hairline AISI441 Car Door Finish-SS Vandalproof Textured

Srl item 01 Contd … NOTE :- Standard Features:- Correction drive to next level Emergency Alarm @ Main Floor Unintended Car Movement Protection (UCMP) Overload protection function with L.W.D. (Load Weighing Device), constant indication/Buzzer Bypass load Function Auto Cut off Fan and Light Centralized Hoisting for lesser vibration and smooth travel Fireman's Emergency Service Micro movement Led Based Buttons Ascending Car Overspeed Protection(ACOP) Direction & Position Indicator In Car & Landing Overspeed Governor Advanced Car Position Indication Automatic Brake Test function every 11hours Phase reversal functioning Manual Rescue Operation +10% to –10% Voltage Fluctuation Withstanding Capacity Door Open Button Car Emergency Light Curtain of light(IR Sensor) fix to sill Accurate Relevelling, Automatic, Closed Door Car door interlock

Srl item 01 Contd … NOTE :- All safety devices to be provided as per latest IS. The car dimension to be match with the well dimension as per structural drawing.

Supply, installing, commisioning & testing of Diesel Engine driven Generator set of 20 KVA with AMF panel complete with suitable acoustic enclosures all as per central pollution control board guide lines CPCB Norms IV Plus , 50 cycle per second with 0.8 power factor, engine as per IS-10001/10002 and alternator as per IS-13364 complete. The alternator of rating 20 KVA of Generator set shall be directly coupled with Diesel Engine mounted on common base plate with alternator and all as specified and comprising of the following:- A. Engine Inline type, 4 cylinder diesel engine of of suitable BHP rating at 1500 RPM as per ISO 3046/BS-5514/649 or 10002 direct injection type with turbo charger & water cooled engine electric starting system, arrangement of starting and the engine shall be capable of running 12 hours continiously and with 10% of overloading for one hours in each 12 hpurs running. The engine recommendations. Engine shall be directly coupled with alternator mounted on common base plate with the following:- (a) 1 Nos 12 volts 100 AH batteries with battery charger. The battery charger shall be able to charge the battery at all time whenever electric supply is given to battery charger through control panel. (b) Heavy duty industrial silencer. (c) Fly wheel with coupling bolts. (d) Lub oil filter.

Srl item 02 Contd … (e) Instrument panel comprising of microprocessor based controller for measuring paramenters like coolent temperature, Running hours, lubricating oil pressure etc. (f) Engine speed mechanical /easy governor class A, Governing (g) Air filter (Dry type) (h) Turbocharger of suitable capacity (i) Gear pump for forced feed lubrication (j) Fuel injection Pump (k) Fuel filter double bowl (l) Raditors (m) Flexible rubber coupling (n) Set of fuel pipes of suitable length (o) Base plate (p) Fuel tank capacity as per manufacturer design with all connecting pipe & fabricated MS stand including level gauge. (q) Anti vibrating pads& mounting for the genertors set, Engine and alternator (r) Legging of exhaust manifold with asbestos rope to exposed pipes (s) Flexible exhaust pipe with end flanged of suitable size. (b) Mechaical protections: Under/over spped, low lube oil pressure, High engine coolant temp, Low fuel level alarm, start/stop fail, charging alternator fail. (c) Cable entry gland plate without cable glands.

Srl item 02 Contd … D. Foundation :- DG Set shall be installed on new foundation block as per manufactures recommendations including excavation works PCC etc for foundations, provision of cable ducts, making good any damage to existing structure, fuel piping from fuel tank to generator set with medium grade GI tubing and cold water piping system (Medium grade GI tubiing from nearest water point to radiator of engine with brass tap and stop cocks and fittings complete connecting the existing earthing strips to control panel, DG set and generator.

Material & Labour in replacement for earthing with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanized earth lead by means of bolts, nuts check nuts and washers of galvanized iron or steel using GI or steel strip 32X6mm dia as earthing lead as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 80mm thick made of RCC (1:1:5:3) type A1 duly reinforced with 8mm dia TMT bar @ 100mm c/c both ways, one lifting handle made out of 10mm dia TMT bar 250mm long embedded in cover slab and cover, wire, copper lugs, etc, mest, charcoal and common salt in alternate layer of 15cm thick.

Supply, laying and testing in replacement of XLPE insulated sheathed armoured heavy duty LT 1100 Volts grade cable with aluminum conductors laid in trenches/pipe, fixed to poles, walls of size 16 sqmm 4 core, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, and for laying of cable or pipes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.